arXiv subjects

André Dankert

Publications and source records attributed to André Dankert.

14 recordsLinked to original sources

arXiv2019

Magnetic proximity in a van der Waals heterostructure of magnetic insulator and graphene

Engineering two-dimensional material heterostructures by combining the best of different materials in one ultimate unit can offer a plethora of opportunities in condensed matter physics. Here, in the van der Waals heterostructures of the ferromagnetic insulator Cr2Ge2Te6 and graphene, our observations indicate an out-of-plane proximity-induced ferromagnetic exchange interaction in graphene. The perpendicular magnetic anisotropy of Cr2Ge2Te6 results in significant modification of the spin transport and precession in graphene, which is ascribed to the proximity-induced exchange interaction. Furthermore, the observation of a larger lifetime for perpendicular spins in comparison to the in-plane counterpart suggests the creation of a proximity-induced anisotropic spin texture in graphene. Our experimental results and density functional theory calculations open up opportunities for the realization of proximity-induced magnetic interactions and spin filters in 2D material heterostructures and can form the basic building blocks for future spintronic and topological quantum devices.

cond-mat.mes-hall↗

arXiv2018

Spin-Polarized Tunneling through Chemical Vapor Deposited Multilayer Molybdenum Disulfide

The two-dimensional (2D) semiconductor molybdenum disulfide (MoS2) has attracted widespread attention for its extraordinary electrical, optical, spin and valley related properties. Here, we report on spin polarized tunneling through chemical vapor deposited (CVD) multilayer MoS2 (~7 nm) at room temperature in a vertically fabricated spin-valve device. A tunnel magnetoresistance (TMR) of 0.5 - 2 % has been observed, corresponding to spin polarization of 5 - 10 % in the measured temperature range of 300 - 75 K. First principles calculations for ideal junctions results in a tunnel magnetoresistance up to 8 %, and a spin polarization of 26 %. The detailed measurements at different temperatures and bias voltages, and density functional theory calculations provide information about spin transport mechanisms in vertical multilayer MoS2 spin-valve devices. These findings form a platform for exploring spin functionalities in 2D semiconductors and understanding the basic phenomenon that control their performance.

cond-mat.mtrl-sci↗

arXiv2018

Hall sensors batch-fabricated on all-CVD h-BN/graphene/h-BN heterostructures

The two-dimensional (2D) material graphene is highly promising for Hall sensors due to its potential of having high charge carrier mobility and low carrier concentration at room temperature. Here, we report the scalable batch-fabrication of magnetic Hall sensors on graphene encapsulated in hexagonal boron nitride (h-BN) using commercially available large area CVD grown materials. The all-CVD grown h-BN/graphene/h-BN van der Waals heterostructures were prepared by layer transfer technique and Hall sensors were batch-fabricated with 1D edge metal contacts. The current-related Hall sensitivities up to 97 V/AT are measured at room temperature. The Hall sensors showed robust performance over the wafer scale with stable characteristics over six months in ambient environment. This work opens avenues for further development of growth and fabrication technologies of all-CVD 2D material heterostructures and allows further improvements in Hall sensor performance for practical applications.

physics.app-ph↗

arXiv2018

Origin and evolution of surface spin current in topological insulators

The Dirac surface states of topological insulators offer a unique possibility for creating spin polarized charge currents due to the spin-momentum locking. Here we demonstrate that the control over the bulk and surface contribution is crucial to maximize the charge-to-spin conversion efficiency. We observe an enhancement of the spin signal due to surface-dominated spin polarization while freezing out the bulk conductivity in semiconducting Bi1.5Sb0.5Te1.7Se1.3 below 100K. Detailed measurements up to room temperature exhibit a strong reduction of the magnetoresistance signal between 2 and 100K, which we attribute to the thermal excitation of bulk carriers and to the electron-phonon coupling in the surface states. The presence and dominance of this effect up to room temperature is promising for spintronic science and technology.

cond-mat.mtrl-sci↗

arXiv2018

Gate-tunable Hall sensors on large area CVD graphene protected by h-BN with 1D edge contacts

Graphene is an excellent material for Hall sensors due to its atomically thin structure, high carrier mobility and low carrier density. However, graphene devices need to be protected from the environment for reliable and durable performance in different environmental conditions. Here we present magnetic Hall sensors fabricated on large area commercially available CVD graphene protected by exfoliated hexagonal boron nitride (h-BN). To connect the graphene active regions of Hall samples to the outputs the 1D edge contacts were utilized which show reliable and stable electrical properties. The operation of the Hall sensors shows the current-related sensitivity up to 345 V/(AT). By changing the carrier concentration and type in graphene by the application of gate voltage we are able to tune the Hall sensitivity.

physics.app-ph↗

arXiv2018

One-dimensional ferromagnetic edge contacts to two-dimensional graphene/h-BN heterostructures

We report the fabrication of one-dimensional (1D) ferromagnetic edge contacts to two-dimensional (2D) graphene/h-BN heterostructures. While aiming to study spin injection/detection with 1D edge contacts, a spurious magnetoresistance signal was observed, which is found to originate from the local Hall effect in graphene due to fringe fields from ferromagnetic edge contacts and in the presence of charge current spreading in the nonlocal measurement configuration. Such behavior has been confirmed by the absence of a Hanle signal and gate-dependent magnetoresistance measurements that reveal a change in sign of the signal for the electron- and hole-doped regimes, which is in contrast to the expected behavior of the spin signal. Calculations show that the contact-induced fringe fields are typically on the order of hundreds of mT, but can be reduced below 100 mT with careful optimization of the contact geometry. There may be additional contribution from magnetoresistance effects due to tunneling anisotropy in the contacts, which need to be further investigated. These studies are useful for optimization of spin injection and detection in 2D material heterostructures through 1D edge contacts.

cond-mat.mes-hall↗

arXiv2016

All-Electrical Spin Field Effect Transistor in van der Waals Heterostructures at Room Temperature

Spintronics aims to exploit the spin degree of freedom in solid state devices for data storage and information processing technologies. The fundamental spintronic device concepts such as creation, manipulation and detection of spin polarization has been demonstrated in semiconductors and spin transistor structures using both the electrical and optical methods. However, an unsolved challenge in the field is the realization of all electrical methods to control the spin polarization and spin transistor operation at ambient temperature. For this purpose, two-dimensional (2D) crystals offer a unique platform due to their remarkable and contrasting spintronic properties, such as weak spin-orbit coupling (SOC) in graphene and strong SOC in molybdenum disulfide (MoS$_2$). Here we combine graphene and MoS$_2$ in a van der Waals heterostructure to realize the electric control of the spin polarization and spin lifetime, and demonstrated a spin field-effect transistor (spin-FET) at room temperature in a non-local measurement geometry. We observe electrical gate control of the spin valve signal due to pure spin transport and Hanle spin precession signals in the graphene channel in proximity with MoS$_2$ at room temperature. We show that this unprecedented control over the spin polarization and lifetime stems from the gate-tuning of the Schottky barrier at the MoS$_2$/graphene interface and MoS$_2$ channel conductivity leading to spin interaction with high SOC material. The all-electrical creation, transport and control of the spin polarization in a spin-FET device at room temperature is a substantial step in the field of spintronics. It opens a new platform for the interplay of spin, charge and orbital degrees of freedom for testing a plethora of exotic physical phenomena, which can be key building blocks in future device architectures.

cond-mat.mes-hall↗

arXiv2014

Tunnel Magnetoresistance with Atomically Thin Two-Dimensional Hexagonal Boron Nitride Barriers

The two-dimensional atomically thin insulator hexagonal boron nitride (h-BN) constitutes a new paradigm in tunnel based devices. A large band gap along with its atomically flat nature without dangling bonds or interface trap states makes it an ideal candidate for tunnel spin transport in spintronic devices. Here, we demonstrate the tunneling of spin-polarized electrons through large area monolayer h-BN prepared by chemical vapor deposition in magnetic tunnel junctions. In ferromagnet/h-BN/ferromagnet heterostructures fabricated over a chip scale, we show tunnel magneto resistance at room temperature. Measurements at different bias voltages and on multiple devices with different ferromagnetic electrodes establish the spin polarized tunneling using h-BN barriers. These results open the way for integration of 2D monolayer insulating barriers in active spintronic devices and circuits operating at ambient temperature, and for further exploration of their properties and prospects.

cond-mat.mes-hall↗

arXiv2014

Room Temperature Electrical Detection of Spin Polarized Currents in Topological Insulators

Topological insulators (TIs) are a new class of quantum materials that exhibit spin momentum locking (SML) of massless Dirac fermions in the surface states. Usually optical methods, such as angle and spin-resolved photoemission spectroscopy, have been employed to observe the helical spin polarization in the surface states of three-dimensional (3D) TIs up to room temperatures. Recently, spin polarized surface currents in 3D TIs were detected by electrical methods using ferromagnetic (FM) contacts in a lateral spin-valve measurement geometry. However, probing the spin texture with such electrical approaches is so far limited to temperatures below 125K, which restricts its application potential. Here we demonstrate the room temperature electrical detection of the spin polarization on the surface of Bi$_2$Se$_3$ due to SML by employing spin sensitive FM tunnel contacts. The current-induced spin polarization on the Bi$_2$Se$_3$ surface is probed at room temperature by measuring a spin-valve signal while switching the magnetization direction of the FM detector. The spin signal increases linearly with current bias, reverses sign with current direction, exhibits a weak temperature dependence and decreases with higher TI thickness, as predicted theoretically. Our results demonstrate the electrical detection of the spin polarization on the surface of 3D TIs, which could lead to innovative spin-based quantum information technology at ambient temperatures.

cond-mat.mes-hall↗

arXiv2014

Engineering Schottky Barrier in Black Phosphorus field effect devices for spintronic applications

Black phosphorous (BP) is is recently unveiled as a promising two-dimensional direct bandgap semiconducting material. Here, we report the ambipolar field effect transistor behavior of multilayers of BP with ferromagnetic tunnel contacts. We observe a reduced of Schottky barrier < 50 meV by using TiO${_2}$/Co contacts, which could be further tuned by gate voltages. Eminently a good transistor performance is achieved in BP devices, with drain current modulation on the order of four to six orders of magnitude. The charge carrier mobility is found to be $\sim$ 155 and 0.18 cm${^2}$ V${^{-1}}$ s${^{-1}}$ for holes and electrons respectively at room temperature. Furthermore, magnetoresistance calculations reveal that the resistances of the BP device with applied gate voltages are in the appropriate range for injection and detection of spin polarized holes. Our results demonstrate the prospect of engineering BP nanolayered devices for efficient nanoelectronic and spintronic applications.

cond-mat.mes-hall↗

arXiv2014

Enhanced Tunnel Spin Injection into Graphene using Chemical Vapor Deposited Hexagonal Boron Nitride

The van der Waals heterostructures of two-dimensional (2D) atomic crystals constitute a new paradigm in nanoscience. Hybrid devices of graphene with insulating 2D hexagonal boron nitride (h-BN) have emerged as promising nanoelectronic architectures through demonstrations of ultrahigh electron motilities and charge-based tunnel transistors. Here, we expand the functional horizon of such 2D materials demonstrating the quantum tunneling of spin-polarized electrons through atomic planes of CVD grown h-BN. We report excellent tunneling behavior of h-BN layers together with tunnel spin injection and transport in graphene using ferromagnet/h-BN contacts. Employing h-BN tunnel contacts, we observe enhancements in both spin signal amplitude and lifetime by an order of magnitude. We demonstrate spin transport and precession over micrometer-scale distances with spin lifetime up to 0.46 nanosecond. Our results and complementary magnetoresistance calculations illustrate that CVD h-BN tunnel barrier provides a reliable, reproducible and alternative approach to address the conductivity mismatch problem for spin injection into graphene.

cond-mat.mes-hall↗

arXiv2014

Spin Transport and Precession in Graphene measured by Nonlocal and Three-Terminal Methods

We investigate the spin transport and precession in graphene by using the Hanle effect in nonlocal and threeterminal measurement geometries. Identical spin lifetimes, spin diffusion lengths and spin polarizations are observed in graphene devices for both techniques over a wide range of temperatures. The magnitude of the spin signals is well explained by spin transport models. These observations rules out any signal enhancements or additional scattering mechanisms at the interfaces for both geometries. This validates the applicability of both the measurement methods for graphene based spintronics devices and their reliable extractions of spin parameters.

cond-mat.mtrl-sci↗

arXiv2014

Thermal Creation of Electron Spin Polarization in n-Type Silicon

Conversion of heat into a spin-current in electron doped silicon can offer a promising path for spin-caloritronics. Here we create an electron spin polarization in the conduction band of n-type silicon by producing a temperature gradient across a ferromagnetic tunnel contact. The substrate heating experiments induce a large spin signal of 95 $μ$V, corresponding to 0.54 meV spin-splitting in the conduction band of n-type silicon by Seebeck spin tunneling mechanism. The thermal origin of the spin injection has been confirmed by the quadratic scaling of the spin signal with the Joule heating current and linear dependence with the heating power.

cond-mat.mtrl-sci↗

arXiv2014

Efficient Spin Injection into Silicon and the Role of the Schottky Barrier

Implementing spin functionalities in Si, and understanding the fundamental processes of spin injection and detection, are the main challenges in spintronics. Here we demonstrate large spin polarizations at room temperature, 34% in n-type and 10% in p-type degenerate Si bands, using a narrow Schottky and a SiO2 tunnel barrier in a direct tunneling regime. Furthermore, by increasing the width of the Schottky barrier in non-degenerate p-type Si, we observed a systematic sign reversal of the Hanle signal in the low bias regime. This dramatic change in the spin injection and detection processes with increased Schottky barrier resistance may be due to a decoupling of the spins in the interface states from the bulk band of Si, yielding a transition from a direct to a localized state assisted tunneling. Our study provides a deeper insight into the spin transport phenomenon, which should be considered for electrical spin injection into any semiconductor.

cond-mat.mtrl-sci↗