arXiv subjects
Publications and source records attributed to André Sandmann.
Signal fading creates points along the fiber where phase cannot be extracted, so they are conventionally discarded. Instead, we propose a Kalman-based solution for {\phi}-OTDR full-fiber monitoring. Experiments demonstrate phase and temperature estimation with approximately 15 times better spatial density than if removing these points.
We present a theoretical, algorithmic, and experimental study of temperature sensing using $\phi$-OTDR with coherent detection. A physics-based model is developed to relate the measured Rayleigh backscattered signal to temperature variations along the fiber, showing that the phase evolution encodes the cumulative temperature change between the interrogator and the sensing location, while the amplitude exhibits only local sensitivity. Based on this insight, we propose robust algorithms for temperature-event detection and temperature-profile reconstruction. Experimental results demonstrate reliable recovery of temperature-induced perturbations in standard single-mode fibers using coherently detected $\phi$-OTDR.
We demonstrate an experimental phase optical time-domain reflectometry (OTDR) system capable of simultaneous detection and classification of various environmental events, such as wind-induced fiber movement, vehicle movement, and audio signatures, with real-time visualization.
CC-OTDR signal envelope shaping is introduced to reduce the impact of non-linear signal interactions on a neighboring wavelength data channel when co-propagating the probing signal with the data signal. Joint co-directional acoustic sensing and 200 Gbps transmission are demonstrated over a 50 km link.
Pairing coherent correlation OTDR with low-complexity analysis methods, we investigate the detection of fast temperature changes and vibrations in optical fibers. A localization accuracy of ~2 m and extraction of vibration amplitudes and frequencies is demonstrated.
A deployed fiber with in-house and underground sections is interrogated with a coherent correlation OTDR. The origin and propagation speed of a hammer-generated pressure wave in the underground section is detected and acoustic signals are monitored.
Distributed fiber sensing based on correlation-aided phase-sensitive optical time domain reflectometry is presented. The focus is on correlation as an enabler for high spatial resolution. Results from different applications are presented.
A coherent optical subassembly (COSA) is evaluated for coherent-correlation optical time domain reflectometry (CC-OTDR) based fibre sensing. Even though the COSA was originally designed for digital communication applications, acoustic signals with frequencies up to 360 Hz can be detected after 50 km of transmission.
Fiber optic sensing is becoming an important means to physically secure today's network infrastructure. However, a network-wide deployment of the monitors will require cost reduction of the interrogator system, which can only be achieved by highly integrated system components. In this contribution, we report on the use of an in-house designed single-chip coherent transceiver for acoustic fiber sensing. The transceiver on the basis of silicon photonics contains a high-speed dual-polarization IQ-modulator as well as a coherent receiver with balanced photodiodes and trans-impedance amplifiers, as defined by the OIF integrated coherent transmit-receive optical sub assembly (IC-TROSA) implementation agreement. The laser, used for transmission and as local oscillator, is provided external to the photonic integrated circuit and can be chosen according to the line-width requirements of the sensing system. The acoustic sensing demonstration is using a correlation-based optical time domain reflectometry with coherent detection. This method is able to detect, besides the amplitude information, the phase of the back-scattered signal, which has a significantly higher sensitivity to environmental effects on the fiber, like temperature and strain. As a proof of concept, sensing of an acoustic signal after a fiber span of 20 km is demonstrated by evaluating the obtained phase information, providing information on external dynamic events up to a frequency of 1.75 kHz.
Superimposed temperature variations and dynamic strain applied through a 400 Hz acoustic signal on a 195 m single-mode fiber section are successfully measured using a coherent correlation optical time domain reflectometry as an interrogator.
In this paper, we report on the development progress of correlation-based optical time domain reflectometry (OTDR). Substituting the direct detection receiver with a coherent receiver enables to extract the phase and polarization information of the reflected signal. Furthermore, due to the mixing of a weak probe signal with a strong local oscillator the sensitivity of the receiver improved. This improvement was demonstrated by analyzing the reflection from an angled physical contact (APC) connector. To further quantify the improvements, we compare the direct detection correlation OTDR (C-OTDR) with the coherent detection correlation OTDR (CC-OTDR) with respect to the spatial and amplitude resolution.