arXiv subjects

Andrés Faíña

Publications and source records attributed to Andrés Faíña.

6 recordsLinked to original sources

arXiv2026

Borrowed Eyes: Markerless Nano-UAV Flight with an Active Quadruped Observer

Nano unmanned aerial vehicles (nano-UAVs) can navigate confined spaces that larger robots cannot, but their payload capacity severely limits the sensors and compute available for self-localization in global navigation satellite system (GNSS)-denied environments. We present a vision-based system that localizes a nano-UAV from a quadruped robot with an arm-mounted camera. The quadruped tracks the drone, estimates its position in its own coordinate system using segmentation masks and depth, and transmits that position over a real-time radio link. To ensure continuous tracking, we developed a perception-aware nonlinear Model Predictive Controller (NMPC) that dynamically adjusts the quadruped's body and arm to maximize the drone's visibility, treating observation reliability as a primary control objective. Relying solely on this external estimate, the nano-UAV executed predefined trajectories from takeoff to landing with a median 3D localization error of 59 mm. The system demonstrates robustness against short visual occlusions by smoothly transitioning to onboard inertial flight when line-of-sight is temporarily lost. Ultimately, this framework allows a quadruped to offload the localization burden of a nano-UAV, enabling inspection of complex spaces that neither robot could navigate alone.

cs.RO↗

arXiv2026

Towards Quadruped-Provided Localization and Active Tracking for Micro-UAVs

Micro unmanned aerial vehicles (micro-UAVs) are small enough to reach confined spaces that larger robots cannot access, but too small to carry the sensing and computing power required for autonomous flight. We move the localization stack entirely off the aerial platform onto a quadruped robot with a 7-degree-of-freedom (DOF) arm, which supplies the micro-UAV (27 g bare, 42 g with fiducial markers) its full 6-DOF pose. A camera at the arm's end-effector detects AprilTag fiducial markers on the drone and composes that observation with the quadruped's own self-localization to place the drone in a shared map frame, so the ground robot localizes its partner, rather than only tracking it relative to the camera. The arm acts as an actively-controlled observer, repositioning to keep the drone in view as both robots move; the drone carries only an inertial measurement unit and fuses the external pose to fly commanded setpoints. In lab flights the external pose is accurate to 12-16 mm, enough to fly the drone autonomously within 2-5 cm of motion-capture-fed control. Having the quadruped actively follow the drone reduces the tracking error from 11.0 cm to 6.9 cm by holding the camera in the close range, where the markers are most accurate.

cs.RO↗

arXiv2026

Making Waves: A Membrane-Coupled Delta Array for Manipulating Objects Below the Actuator Spacing

Distributed manipulator systems manipulate objects through the coordinated motion of many actuators. However, an object must be supported by several actuators at once, so the centre-to-centre actuator spacing imposes a hard lower bound on manipulable object size. We remove this bound by coupling the end-effectors of an 8 x 8 array of three degrees-of-freedom delta robots with a stretchable fabric, turning 64 discrete contacts into a continuous surface capable of manipulating objects smaller than the actuator spacing. Viewing the array as a displacement field over that surface, we investigate local quasi-static and cyclic fields as manipulation primitives. These primitives can be applied globally across the array or locally confined around each tracked object to independently manipulate several objects in parallel. We then train a policy acting on low-order discrete cosine transform coefficients: at equal action dimension, commanding a nineteen-delta neighbourhood halves the placement error of commanding the whole array. The policy transfers to hardware without adaptation at 76% success. The platform manipulates objects from 15mm-90mm, a six-fold range spanning both sides of the actuator spacing, 43.3mm, on a single surface.

cs.RO↗

arXiv2026

Scalable Low-Density Distributed Manipulation Using an Interconnected Actuator Array

Distributed Manipulator Systems, composed of arrays of robotic actuators necessitate dense actuator arrays to effectively manipulate small objects. This paper presents a system composed of modular 3-DoF robotic tiles interconnected by a compliant surface layer, forming a continuous, controllable manipulation surface. The compliant layer permits increased actuator spacing without compromising object manipulation capabilities, significantly reducing actuator density while maintaining robust control, even for smaller objects. We characterize the coupled workspace of the array and develop a manipulation strategy capable of translating objects to arbitrary positions within an N X N array. The approach is validated experimentally using a minimal 2 X 2 prototype, demonstrating the successful manipulation of objects with varied shapes and sizes.

cs.RO↗

arXiv2025

Flexible and Foldable: Workspace Analysis and Object Manipulation Using a Soft, Interconnected, Origami-Inspired Actuator Array

Object manipulation is a fundamental challenge in robotics, where systems must balance trade-offs among manipulation capabilities, system complexity, and throughput. Distributed manipulator systems (DMS) use the coordinated motion of actuator arrays to perform complex object manipulation tasks, seeing widespread exploration within the literature and in industry. However, existing DMS designs typically rely on high actuator densities and impose constraints on object-to-actuator scale ratios, limiting their adaptability. We present a novel DMS design utilizing an array of 3-DoF, origami-inspired robotic tiles interconnected by a compliant surface layer. Unlike conventional DMS, our approach enables manipulation not only at the actuator end effectors but also across a flexible surface connecting all actuators; creating a continuous, controllable manipulation surface. We analyse the combined workspace of such a system, derive simple motion primitives, and demonstrate its capabilities to translate simple geometric objects across an array of tiles. By leveraging the inter-tile connective material, our approach significantly reduces actuator density, increasing the area over which an object can be manipulated by x1.84 without an increase in the number of actuators. This design offers a lower cost and complexity alternative to traditional high-density arrays, and introduces new opportunities for manipulation strategies that leverage the flexibility of the interconnected surface.

cs.RO↗

arXiv2025

Neural Cellular Automata for Decentralized Sensing using a Soft Inductive Sensor Array for Distributed Manipulator Systems

In Distributed Manipulator Systems (DMS), decentralization is a highly desirable property as it promotes robustness and facilitates scalability by distributing computational burden and eliminating singular points of failure. However, current DMS typically utilize a centralized approach to sensing, such as single-camera computer vision systems. This centralization poses a risk to system reliability and offers a significant limiting factor to system size. In this work, we introduce a decentralized approach for sensing and in a Distributed Manipulator Systems using Neural Cellular Automata (NCA). Demonstrating a decentralized sensing in a hardware implementation, we present a novel inductive sensor board designed for distributed sensing and evaluate its ability to estimate global object properties, such as the geometric center, through local interactions and computations. Experiments demonstrate that NCA-based sensing networks accurately estimate object position at 0.24 times the inter sensor distance. They maintain resilience under sensor faults and noise, and scale seamlessly across varying network sizes. These findings underscore the potential of local, decentralized computations to enable scalable, fault-tolerant, and noise-resilient object property estimation in DMS

cs.RO↗