arXiv subjects

Andras Kis

Publications and source records attributed to Andras Kis.

At least 37 records · Page 2Linked to original sources

arXiv2018

Intervalley Scattering of Interlayer Excitons in a MoS$_2$/MoSe$_2$/MoS$_2$ Heterostructure in High Magnetic Field

Degenerate extrema in the energy dispersion of charge carriers in solids, also referred to as valleys, can be regarded as a binary quantum degree of freedom, which can potentially be used to implement valleytronic concepts in van der Waals heterostructures based on transition metal dichalcogenides. Using magneto-photoluminescence spectroscopy, we achieve a deeper insight into the valley polarization and depolarization mechanisms of interlayer excitons formed across a MoS$_2$/MoSe$_2$/MoS$_2$ heterostructure. We account for the non-trivial behavior of the valley polarization as a function of the magnetic field by considering the interplay between exchange interaction and phonon mediated intervalley scattering in a system consisting of Zeeman-split energy levels. Our results represent a crucial step towards the understanding of the properties of interlayer excitons, with strong implications for the implementation of atomically thin valleytronic devices.

cond-mat.mes-hall↗

arXiv2018

Control of interlayer excitons in two-dimensional van der Waals heterostructures

Long-lived interlayer excitons with distinct spin-valley physics in van der Waals heterostructures based on transition metal dichalcogenides make them promising for information processing in next-generation devices. While the emission characteristics of interlayer excitons in different types of hetero stacks have been extensively studied, the manipulation of these excitons required to alter the valley-state or tune the emission energy and intensity is still lacking. Here, we demonstrate such control over interlayer excitons in MoSe2/WSe2 heterostructures. The encapsulation of our stack with h-BN ensures ultraclean interfaces, allowing us to resolve four separate narrow interlayer emission peaks. We observe two main interlayer transitions with opposite helicities under circularly polarized excitation, either conserving or inverting the polarization of incoming light. We further demonstrate control over the wavelength, intensity, and polarization of exciton emission by electrical and magnetic fields. Such ability to manipulate the interlayer excitons and their polarization could pave the way for novel excitonic and valleytronic device applications.

cond-mat.mes-hall↗

arXiv2017

Defect healing and charge transfer mediated valley polarization in MoS$_2$/MoSe$_2$/MoS$_2$ trilayer van der Waals heterostructures

Monolayer transition metal dichalcogenides (TMDC) grown by chemical vapor deposition (CVD) are plagued by a significantly lower optical quality compared to exfoliated TMDC. In this work we show that the optical quality of CVD-grown MoSe$_2$ is completely recovered if the material is sandwiched in MoS$_2$/MoSe$_2$/MoS$_2$ trilayer van der Waals heterostructures. We show by means of density-functional theory that this remarkable and unexpected result is due to defect healing: S atoms of the more reactive MoS$_2$ layers are donated to heal Se vacancy defects in the middle MoSe$_2$ layer. In addition, the trilayer structure exhibits a considerable charge-transfer mediated valley polarization of MoSe$_2$ without the need for resonant excitation. Our fabrication approach, relying solely on simple flake transfer technique, paves the way for the scalable production of large-area TMDC materials with excellent optical quality.

cond-mat.mes-hall↗

arXiv2017

Highly-Oriented Atomically Thin Ambipolar MoSe$_2$ Grown by Molecular Beam Epitaxy

Transition metal dichalcogenides (TMDCs), together with other two-dimensional (2D) materials have attracted great interest due to the unique optical and electrical properties of atomically thin layers. In order to fulfill their potential, developing large-area growth and understanding the properties of TMDCs have become crucial. Here, we used molecular beam epitaxy (MBE) to grow atomically thin MoSe$_2$ on GaAs(111)B. No intermediate compounds were detected at the interface of as-grown films. Careful optimization of the growth temperature can result in the growth of highly aligned films with only two possible crystalline orientations due to broken inversion symmetry. As-grown films can be transferred onto insulating substrates allowing their optical and electrical properties to be probed. By using polymer electrolyte gating, we have achieved ambipolar transport in MBE-grown MoSe$_2$. The temperature-dependent transport characteristics can be explained by the 2D variable-range hopping (2D-VRH) model, indicating that the transport is strongly limited by the disorder in the film.

cond-mat.mtrl-sci↗

arXiv2017

Optospintronics in graphene via proximity coupling

The observation of micron size spin relaxation makes graphene a promising material for applications in spintronics requiring long distance spin communication. However, spin dependent scatterings at the contact/graphene interfaces affect the spin injection efficiencies and hence prevent the material from achieving its full potential. While this major issue could be eliminated by nondestructive direct optical spin injection schemes, graphenes intrinsically low spin orbit coupling strength and optical absorption place an obstacle in their realization. We overcome this challenge by creating sharp artificial interfaces between graphene and WSe2 monolayers. Application of a circularly polarized light activates the spin polarized charge carriers in the WSe2 layer due to its spin coupled valley selective absorption. These carriers diffuse into the superjacent graphene layer, transport over a 3.5 um distance, and are finally detected electrically using BN/Co contacts in a non local geometry. Polarization dependent measurements confirm the spin origin of the non local signal.

cond-mat.mes-hall↗

arXiv2017

High Throughput Characterization of Epitaxially Grown Single-Layer MoS2

The growth of single-layer MoS2 with chemical vapor deposition is an established method that can produce large-area and high quality samples. In this article, we investigate the geometrical and optical properties of hundreds of individual single-layer MoS2 crystallites grown on a highly-polished sapphire substrate. Most of the crystallites are oriented along the terraces of the sapphire substrate and have an area comprised between 10 μm2 and 60 μm2. Differential reflectance measurements performed on these crystallites show that the area of the MoS2 crystallites has an influence on the position and broadening of the B exciton while the orientation does not influence the A and B excitons of MoS2. These measurements demonstrate that differential reflectance measurements have the potential to be used to characterize the homogeneity of large area CVD grown samples.

cond-mat.mes-hall↗

arXiv2016

Micro-reflectance and transmittance spectroscopy: a versatile and powerful tool to characterize 2D materials

Optical spectroscopy techniques such as differential reflectance and transmittance have proven to be very powerful techniques to study 2D materials. However, a thorough description of the experimental setups needed to carry out these measurements is lacking in the literature. We describe a versatile optical microscope setup to carry out differential reflectance and transmittance spectroscopy in 2D materials with a lateral resolution of ~1 micron in the visible and near-infrared part of the spectrum. We demonstrate the potential of the presented setup to determine the number of layers of 2D materials and to characterize their fundamental optical properties such as excitonic resonances. We illustrate its performance by studying mechanically exfoliated and chemical vapor-deposited transition metal dichalcogenide samples.

cond-mat.mes-hall↗

arXiv2016

Valley Polarization by Spin Injection in a Light-Emitting van der Waals Heterojunction

The band structure of transition metal dichalcogenides (TMDCs) with valence band edges at different locations in the momentum space could be harnessed to build devices that operate relying on the valley degree of freedom. To realize such valleytronic devices, it is necessary to control and manipulate the charge density in these valleys, resulting in valley polarization. While this has been demonstrated using optical excitation, generation of valley polarization in electronic devices without optical excitation remains difficult. Here, we demonstrate spin injection from a ferromagnetic electrode into a heterojunction based on monolayers of WSe2 and MoS2 and lateral transport of spin-polarized holes within the WSe2 layer. The resulting valley polarization leads to circularly polarized light emission which can be tuned using an external magnetic field. This demonstration of spin injection and magnetoelectronic control over valley polarization provides a new opportunity for realizing combined spin and valleytronic devices based on spin-valley locking in semiconducting TMDCs.

cond-mat.mes-hall↗

arXiv2016

High-frequency, scaled MoS2 transistors

The interest in MoS2 for radio-frequency (RF) application has recently increased. However, little is known on the scaling behavior of transistors made from MoS2 for RF applications, which is important for establishing performance limits for electronic circuits based on 2D semiconductors on flexible and rigid substrates. Here, we present a systematic study of top-gated trilayer MoS2 RF transistors with gate lengths scaled down to 70 and 40 nm. In addition, by introducing edge-contacted injection of electrons in trilayer MoS2 devices, we decrease the contact resistance and as a result obtain the highest cutoff frequency of 6 GHz before the de-embedding procedure and 25 GHz after the de-embedding procedure.

cond-mat.mes-hall↗

arXiv2016

Disorder engineering and conductivity dome in ReS2 with electrolyte gating

Atomically thin rhenium disulphide (ReS2) is a member of the transition metal dichalcogenide (TMDC) family of materials characterized by weak interlayer coupling and a distorted 1T structure. Here, we report on the electrical transport study of mono- and multilayer ReS2 with polymer electrolyte gating. We find that the conductivity of monolayer ReS2 is completely suppressed at high carrier densities, an unusual feature unique to monolayers, making ReS2 the first example of such a material. While thicker flakes of ReS2 also exhibit a conductivity dome and an insulator-metal-insulator sequence, they do not show a complete conductivity suppression at high doping densities. Using dual-gated devices, we can distinguish the gate-induced doping from the electrostatic disorder induced by the polymer electrolyte itself. Theoretical calculations and a transport model indicate that the observed conductivity suppression can be explained by a combination of a narrow conduction band and Anderson localization due to electrolyte-induced disorder.

cond-mat.mes-hall↗

arXiv2016

Electroabsorption in MoS$_2$

To translate electrical into optical signals one uses the modulation of either the refractive index or the absorbance of a material by an electric field. Contemporary electroabsorption modulators (EAMs) employ the quantum confined Stark effect (QCSE), the field-induced red-shift and broadening of the strong excitonic absorption resonances characteristic of low-dimensional semiconductor structures. Here we show an unprecedentedly strong transverse electroabsorption (EA) signal in a monolayer of the two-dimensional semiconductor MoS2. The EA spectrum is dominated by an apparent linewidth broadening of around 15% at a modulated voltage of only Vpp = 0.5 V. Contrary to the conventional QCSE, the signal increases linearly with the applied field strength and arises from a linear variation of the distance between the strongly overlapping exciton and trion resonances. The achievable modulation depths exceeding 0.1 dBnm-1 bear the scope for extremely compact, ultrafast, energy-efficient EAMs for integrated photonics, including on-chip optical communication.

cond-mat.mtrl-sci↗

arXiv2015

Electromechanical Oscillations in Bilayer Graphene

Nanoelectromechanical systems (NEMS) constitute a class of devices lying at the interface between fundamental research and technological applications. Integrating novel materials such as graphene into NEMS allows studying their mechanical and electromechanical characteristics at the nanoscale and addressing fundamental questions such as electron-phonon interaction and bandgap engineering. In this work, we integrate single and bilayer graphene into NEMS and probe the interplay between their mechanical and electrical properties. We show that the deflection of monolayer graphene nanoribbons results in a linear increase in their electrical resistance. Surprisingly, we observe oscillations in the electromechanical response of bilayer graphene. The proposed theoretical model suggests that these oscillations arise from quantum mechanical interference taking place due to the lateral displacement of graphene layers with respect to each other. Our work shows that bilayer graphene conceals unexpectedly rich and novel physics with promising potential in NEMS-based applications.

cond-mat.mes-hall↗

arXiv2015

Piezoresistivity and Strain-induced Band Gap Tuning in Atomically Thin MoS2

The bandgap of MoS2 is highly strain-tunable which results in the modulation of its electrical conductivity and manifests itself as the piezoresistive effect while a piezoelectric effect was also observed in odd-layered MoS2 with broken inversion symmetry. This coupling between electrical and mechanical properties makes MoS2 a very promising material for nanoelectromechanical systems (NEMS). Here we incorporate monolayer, bilayer and trilayer MoS2 in a nanoelectromechanical membrane configuration. We detect strain-induced band gap tuning via electrical conductivity measurements and demonstrate the emergence of the piezoresistive effect in MoS2. Finite element method (FEM) simulations are used to quantify the band gap change and to obtain a comprehensive picture of the spatially varying bandgap profile on the membrane. The piezoresistive gauge factor is calculated to be -148 +/- 19, -224 +/- 19 and -43.5 +/- 11 for monolayer, bilayer and trilayer MoS2 respectively which is comparable to state-of-the-art silicon strain sensors and two orders of magnitude higher than in strain sensors based on suspended graphene. Controllable modulation of resistivity in 2D nanomaterials using strain-induced bandgap tuning offers a novel approach for implementing an important class of NEMS transducers, flexible and wearable electronics, tuneable photovoltaics and photodetection.

cond-mat.mes-hall↗

arXiv2015

Identification of single nucleotides in MoS2 nanopores

Ultrathin membranes have drawn much attention due to their unprecedented spatial resolution for DNA nanopore sequencing. However, the high translocation velocity (3000-50000 nt/ms) of DNA molecules moving across such membranes limits their usability. To this end, we have introduced a viscosity gradient system based on room-temperature ionic liquids (RTILs) to control the dynamics of DNA translocation through a nanometer-size pore fabricated in an atomically thin MoS2 membrane. This allows us for the first time to statistically identify all four types of nucleotides with solid state nanopores. Nucleotides are identified according to the current signatures recorded during their transient residence in the narrow orifice of the atomically thin MoS2 nanopore. In this novel architecture that exploits high viscosity of RTIL, we demonstrate single-nucleotide translocation velocity that is an optimal speed (1-50 nt/ms) for DNA sequencing, while keeping the signal to noise ratio (SNR) higher than 10. Our findings pave the way for future low-cost and rapid DNA sequencing using solid-state nanopores.

cond-mat.soft↗

arXiv2015

Numerical correction of anti-symmetric aberrations in single HRTEM images of weakly scattering 2D-objects

Here, we present a numerical post-processing method for removing the effect of anti-symmetric residual aberrations in high-resolution transmission electron microscopy (HRTEM) images of weakly scattering 2D-objects. The method is based on applying the same aberrations with the opposite phase to the Fourier transform of the recorded image intensity and subsequently inverting the Fourier transform. We present the theoretical justification of the method and its verification based on simulated images in the case of low-order anti-symmetric aberrations. Ultimately the method is applied to experimental hardware aberration-corrected HRTEM images of single-layer graphene and MoSe2 resulting in images with strongly reduced residual low-order aberrations, and consequently improved interpretability. Alternatively, this method can be used to estimate by trial and error the residual anti-symmetric aberrations in HRTEM images of weakly scattering objects.

cond-mat.mtrl-sci↗

arXiv2014

Avalanche photodiodes based on MoS2/Si heterojunctions

Avalanche photodiodes (APDs) are the semiconducting analogue of photomultiplier tubes offering very high internal current gain and fast response. APDs are interesting for a wide range of applications in communications1, laser ranging2, biological imaging3, and medical imaging4 where they offer speed and sensitivity superior to those of classical p-n junction-based photodetectors. The APD principle of operation is based on photocurrent multiplication through impact ionization in reverse-biased p-n junctions. APDs can either operate in proportional mode, where the bias voltage is below breakdown, or in Geiger mode, where the bias voltage is above breakdown. In proportional mode, the multiplication gain is finite, thus allowing for photon energy discrimination, while in Geiger mode of operation the multiplication gain is virtually infinite and a self-sustaining avalanche may be triggered, thus allowing detection of single photons5. Here, we demonstrate APDs based on vertically stacked monolayer MoS2 and p-Si, forming an abrupt p-n heterojunction. With this device, we demonstrate carrier multiplication exceeding 1000. Even though such multiplication factors in APDs are commonly accompanied by high noise, our devices show extremely low noise levels comparable with those in regular photodiodes. These heterostructures allow the realization of simple and inexpensive high-performance and low-noise photon counters based on transition metal dichalcogenides.

cond-mat.mes-hall↗

arXiv2014

Optically Active Quantum Dots in Monolayer WSe$_2$

Semiconductor quantum dots have emerged as promising candidates for implementation of quantum information processing since they allow for a quantum interface between stationary spin qubits and propagating single photons. In the meanwhile, transition metal dichalcogenide (TMD) monolayers have moved to the forefront of solid-state research due to their unique band structure featuring a large band gap with degenerate valleys and non-zero Berry curvature. Here we report the observation of quantum dots in monolayer tungsten-diselenide with an energy that is 20 to 100 meV lower than that of two dimensional excitons. Photon antibunching in second-order photon correlations unequivocally demonstrates the zero-dimensional anharmonic nature of these quantum emitters. The strong anisotropic magnetic response of the spatially localized emission peaks strongly indicates that radiative recombination stems from localized excitons that inherit their electronic properties from the host TMD. The large $\sim$ 1 meV zero-field splitting shows that the quantum dots have singlet ground states and an anisotropic confinement most likely induced by impurities or defects in the host TMD. Electrical control in van der Waals heterostructures and robust spin-valley degree of freedom render TMD quantum dots promising for quantum information processing.

cond-mat.mes-hall↗

arXiv2014

MoS2 Transistors Operating at Gigahertz Frequencies

The presence of a direct band gap and an ultrathin form factor has caused a considerable interest in two-dimensional (2D) semiconductors from the transition metal dichalcogenides (TMD) family with molybdenum disulphide (MoS2) being the most studied representative of this family of materials. While diverse electronic elements, logic circuits and optoelectronic devices have been demonstrated using ultrathin MoS2, very little is known about their performance at high frequencies where commercial devices are expected to function. Here, we report on top-gated MoS2 transistors operating in the gigahertz range of frequencies. Our devices show cutoff frequencies reaching 6 GHz. The presence of a band gap also gives rise to current saturation, allowing power and voltage gain, all in the gigahertz range. This shows that MoS2 could be an interesting material for realizing high-speed amplifiers and logic circuits with device scaling expected to result in further improvement of performance. Our work represents the first step in the realization of high-frequency analog and digital circuits based on two-dimensional semiconductors.

cond-mat.mes-hall↗