arXiv subjects

Andre Schöning

Publications and source records attributed to Andre Schöning.

6 recordsLinked to original sources

arXiv2025

TelePix2: Full scale fast region of interest trigger and timing for the EUDET-style telescopes at the DESY II Test Beam Facility

With increasing demands by future and current upgrades of particle physics experiments on rate capabilities and time resolution, the requirements on test beams are also increasing. The current infrastructure at the DESY II test beam facility includes particle tracking telescopes with long integration times, no additional timing but excellent spatial resolution. This results in readouts with multiple particles per trigger, causing ambiguities in tracking and assigning particles to triggers. Also, it is likely not to trigger on particles that pass through a small device under test, leading to inefficient data taking. These issues can be solved by adding TelePix2 as a timing and flexible region of interest trigger layer. TelePix2 is a full scale HV-CMOS chip based on the successful small scale prototype TelePix. The DAQ system and the sensors performance featuring efficiencies above 99 % and a time resolution of 3.844(2) ns are presented. The integration into EUDAQ2 and the AIDA-TLU to seamlessly work in the test beam environment as well as into the analysis chain is described. First successful use cases are highlighted to conclude that TelePix2 is a well-suited timing and trigger layer for test beams

hep-ex↗

arXiv2025

A General Track Fit based on Triplets

This paper presents a general three-dimensional track fit based on hit triplets. The general track fit considers spatial hit and multiple Coulomb scattering uncertainties, and can also be extended to include energy losses. Input to the fit are detector-specific triplet parameters, which contain information about the triplet geometry (hit positions), the radiation length of the material and the magnetic field. Since the solution is given by an analytical closed-form, it is possible to use the same fitting code for all kind of tracking detectors. Fitting formulas are given for the global track fit as well as for the local hit triplets. The latter allows filtering out triplets with poor fit quality at an early stage of track reconstruction. The construction and fit of local triplets is fully parallelizable, enabling accelerated computation with parallel hardware architectures. Formulas for the detector-specific triplet parameters are derived for the two most commonly used field configuration for tracking detectors, namely a uniform solenoidal field and gap spectrometer dipole. An algorithm to calculate the triplet parameters for an arbitrary magnetic field configuration is presented too. This paper also includes a discussion of inherent track fit biases. Furthermore, a new method is proposed to accelerate track fitting by classifying tracking regimes and using optimal fit formulas.

physics.ins-det↗

arXiv2019

Effects of Proton Irradiation on 60 GHz CMOS Transceiver Chip for Multi-Gbps Communication in High-Energy Physics Experiments

This paper presents the experimental results of $17~MeV$ proton irradiation on a $60~GHz$ low power, half-duplex transceiver (TRX) chip implemented in $65~nm$ CMOS technology. It supports short range point-to-point data rate up to $6~Gbps$ by employing on-off keying (OOK). To investigate the irradiation hardness for high energy physics applications, two TRX chips were irradiated with total ionizing doses (TID) of $74~kGy$ and $42~kGy$ and fluence of $1.4~\times$10$^{14}~ N_{eq}/cm^2$ and $0.8~\times$10$^{14}~N_{eq}/cm^2$ for RX and TX modes, respectively. The chips were characterized by pre- and post-irradiation analogue voltage measurements on different circuit blocks as well as through the analysis of wireless transmission parameters like bit error rate (BER), eye diagram, jitter etc. Post-irradiation measurements have shown certain reduction in performance but both TRX chips have been found operational through over the air measurements at $5~Gbps$. Moreover, very small shift in the carrier frequency was observed after the irradiation.

physics.ins-det↗

arXiv2016

A New Three-Dimensional Track Fit with Multiple Scattering

Modern semiconductor detectors allow for charged particle tracking with ever increasing position resolution. Due to the reduction of the spatial hit uncertainties, multiple Coulomb scattering in the detector layers becomes the dominant source for tracking uncertainties. In this case long distance effects can be ignored for the momentum measurement, and the track fit can consequently be formulated as a sum of independent fits to hit triplets. In this paper we present an analytical solution for a three-dimensional triplet(s) fit in a homogeneous magnetic field based on a multiple scattering model. Track fitting of hit triplets is performed using a linearization ansatz. The momentum resolution is discussed for a typical spectrometer setup. Furthermore the track fit is compared with other track fits for two different pixel detector geometries, namely the Mu3e experiment at PSI and a typical high-energy collider experiment. For a large momentum range the triplets fit provides a significantly better performance than a single helix fit. The triplets fit is fast and can easily be parallelized, which makes it ideal for the implementation on parallel computing architectures.

physics.ins-det↗

arXiv2016

A New Track Reconstruction Algorithm suitable for Parallel Processing based on Hit Triplets and Broken Lines

Track reconstruction in high track multiplicity environments at current and future high rate particle physics experiments is a big challenge and very time consuming. The search for track seeds and the fitting of track candidates are usually the most time consuming steps in the track reconstruction. Here, a new and fast track reconstruction method based on hit triplets is proposed which exploits a three-dimensional fit model including multiple scattering and hit uncertainties from the very start, including the search for track seeds. The hit triplet based reconstruction method assumes a homogeneous magnetic field which allows to give an analytical solutions for the triplet fit result. This method is highly parallelizable, needs fewer operations than other standard track reconstruction methods and is therefore ideal for the implementation on parallel computing architectures. The proposed track reconstruction algorithm has been studied in the context of the Mu3e-experiment and a typical LHC experiment.

physics.ins-det↗

arXiv2014

Three-Dimensional Triplet Tracking for LHC and Future High Rate Experiments

The hit combinatorial problem is a main challenge for track reconstruction and triggering at high rate experiments. At hadron colliders the dominant fraction of hits is due to low momentum tracks for which multiple scattering (MS) effects dominate the hit resolution. MS is also the dominating source for hit confusion and track uncertainties in low energy precision experiments. In all such environments, where MS dominates, track reconstruction and fitting can be largely simplified by using three-dimensional (3D) hit-triplets as provided by pixel detectors. This simplification is possible since track uncertainties are solely determined by MS if high precision spatial information is provided. Fitting of hit-triplets is especially simple for tracking detectors in solenoidal magnetic fields. The over-constrained 3D-triplet method provides a complete set of track parameters and is robust against fake hit combinations. The triplet method is ideally suited for pixel detectors where hits can be treated as 3D-space points. With the advent of relatively cheap and industrially available CMOS-sensors the construction of highly granular full scale pixel tracking detectors seems to be possible also for experiments at LHC or future high energy (hadron) colliders. In this paper tracking performance studies for full-scale pixel detectors, including their optimisation for 3D-triplet tracking, are presented. The results obtained for different types of tracker geometries and different reconstruction methods are compared. The potential of reducing the number of tracking layers and -- along with that -- the material budget using this new tracking concept is discussed. The possibility of using 3D-triplet tracking for triggering and fast online reconstruction is highlighted.

physics.ins-det↗