arXiv subjects

Andrea Alessandretti

Publications and source records attributed to Andrea Alessandretti.

5 recordsLinked to original sources

arXiv2026

Tripody: An Overconstrained 3-SPR-like Parallel Robot for High-Reach Construction Tasks

Many ceiling construction tasks still rely on heavy serial manipulators that are difficult to deploy in cluttered interiors, motivating lightweight, field-ready alternatives that reach ceiling height while maintaining millimeter-level accuracy and the stiffness demanded by overhead tool loads. We introduce Tripody, a wheeled 3-DoF parallel robot for high-reach tasks that replaces the base spherical joints of a classical 3-SPR (3 legs; S: base spherical joint; P: actuated prismatic joint; R: end-effector revolute joint) morphology with universal joints, intentionally overconstraining the mechanism; small, distributed elastic deflections absorb the resulting incompatibilities, preserving predominantly translational motion. The 33kg system extends from 1.7m to 3.4m in height, supports a continuous 32kg payload, and offers a modular end-effector interface for ceiling operations. We detail the mechanical design - including custom linear actuators and a kinematic-compatibility analysis - and a control stack for accurate positioning that combines SE(3) state estimation, forward kinematics, and task-space control. In experiments, Tripody exhibits similar in-plane stiffness to a spherical-base variant but substantially higher torsional stiffness - an increase of 67% at 1.7m, 196% at 2.6m, and 454% at 3.4m - while maintaining negligible cross-axis coupling. Closed-loop positioning with a total station converges below 0.6mm across the entire workspace; pure model extrapolation achieves a 95th-percentile error of 2.7mm (max 3.6mm). Finally, we demonstrate task-level ceiling-drilling feasibility in an open-loop study by drilling a 15-hole pattern with 4.5mm maximum relative hole-position error after rigid alignment. These results support overconstrained, compliance-absorbing 3-SPR-like architectures as a practical path to lightweight, high- reach, millimeter-accurate construction robots.

cs.RO↗

arXiv2025

Enhancing Robotic Precision in Construction: A Modular Factor Graph-Based Framework to Deflection and Backlash Compensation Using High-Accuracy Accelerometers

Accurate positioning is crucial in the construction industry, where labor shortages highlight the need for automation. Robotic systems with long kinematic chains are required to reach complex workspaces, including floors, walls, and ceilings. These requirements significantly impact positioning accuracy due to effects such as deflection and backlash in various parts along the kinematic chain. In this work, we introduce a novel approach that integrates deflection and backlash compensation models with high-accuracy accelerometers, significantly enhancing position accuracy. Our method employs a modular framework based on a factor graph formulation to estimate the state of the kinematic chain, leveraging acceleration measurements to inform the model. Extensive testing on publicly released datasets, reflecting real-world construction disturbances, demonstrates the advantages of our approach. The proposed method reduces the $95\%$ error threshold in the xy-plane by $50\%$ compared to the state-of-the-art Virtual Joint Method, and by $31\%$ when incorporating base tilt compensation.

cs.RO↗

arXiv2021

Discrete-Time Fractional-Order Dynamical Networks Minimum-Energy State Estimation

Fractional-order dynamical networks are increasingly being used to model and describe processes demonstrating long-term memory or complex interlaced dependencies amongst the spatial and temporal components of a wide variety of dynamical networks. Notable examples include networked control systems or neurophysiological networks which are created using electroencephalographic (EEG) or blood-oxygen-level-dependent (BOLD) data. As a result, the estimation of the states of fractional-order dynamical networks poses an important problem. To this effect, this paper addresses the problem of minimum-energy state estimation for discrete-time fractional-order dynamical networks (DT-FODN), where the state and output equations are affected by an additive noise that is considered to be deterministic, bounded, and unknown. Specifically, we derive the corresponding estimator and show that the resulting estimation error is exponentially input-to-state stable with respect to the disturbances and to a signal that is decreasing with the increase of the accuracy of the adopted approximation model. An illustrative example shows the effectiveness of the proposed method on real-world neurophysiological networks.

math.OC↗

arXiv2019

An optimization-based cooperative path-following framework for multiple robotic vehicles

This paper addresses the design of an optimization-based cooperative path-following control law for multiple robotic vehicles that optimally balances the transient trade-off between coordination and path-following errors. To this end, we formulate a more general multi-agent framework where each agent is associated with (i) a continuous-time dynamical model, which governs the evolution of its state, and (ii) an output equation that is a function of both the state of the agent and a coordination vector. According to a given network topology, each agent can access its state and coordination vector, as well as the coordination vectors of the neighboring agents. In this setup, the goal is to design a distributed control law that steers the output signals to the origin, while simultaneously driving the coordination vectors of the agents of the network to consensus. To solve this, we propose a model predictive control scheme that builds on a pre-existing auxiliary consensus control law to design a performance index that combines the output regulation objective with the consensus objective. Convergence guarantees under which one can solve this coordinated output regulation problem are provided. Numerical simulations display the effectiveness of the proposed scheme applied to a cooperative path following control problem of a network of 3D nonholonomic robotic vehicles.

eess.SY↗

arXiv2019

Finite-dimensional control of linear discrete-time fractional-order systems

This paper addresses the design of finite-dimensional feedback control laws for linear discrete-time fractional-order systems with additive state disturbance. A set of sufficient conditions are provided to guarantee convergence of the state trajectories to an ultimate bound around the origin with size increasing with the magnitude of the disturbances. Performing a suitable change of coordinates, the latter result can be used to design a controller that is able to track reference trajectories that are solutions of the unperturbed fractional-order system. To overcome the challenges associated with the generation of such solutions, we address the practical case where the references to be tracked are generated as a solution of a specific finite-dimensional approximation of the original fractional-order system. In this case, the tracking error trajectory is driven to an asymptotic bound that is increasing with the magnitude of the disturbances and decreases with the increment in the accuracy of the approximation. The proposed controllers are finite-dimensional, in the sense that the computation of the control input only requires a finite number of previous state and input vectors of the system. Numerical simulations illustrate the proposed design methods in different scenarios.

math.OC↗