arXiv subjects

Andrea Bianco

Publications and source records attributed to Andrea Bianco.

At least 19 recordsLinked to original sources

arXiv2026

WST, the Wide-field Spectroscopic Telescope: dispersing elements

The Wide-field Spectroscopic Telescope (WST) is a proposed 12-m class facility entirely dedicated to spectroscopic surveys, combining a high-multiplex multi-object spectrograph operating at low (MOS-LR) and high (MOS-HR) spectral resolution with a giant panoramic integral-field spectrograph (IFS), all three operating in parallel. Diffraction gratings are the key dispersing elements of all three instruments and, given the very large number and size of the units required, drive critical trade-offs in throughput, feasibility and production cost. This paper reviews the two grating technologies under consideration for WST, Volume Phase Holographic Gratings (VPHG) and binary (lithographic, surface-relief) gratings, summarizing their working principles and the parameters that control their diffraction efficiency. We then present the current baseline grating parameters and vendor results for each instrument: low-dispersion, VPHGs for the IFS; a four-arm GRISM layout for MOS-LR; and two competing high-resolution disperser architectures (8M16D and 16M4D) for MOS-HR, where binary gratings show a promising path to diffraction efficiencies beyond what is achievable with VPHGs. We conclude with the main open challenges, chiefly the mass production of hundreds of grating units within cost and schedule and the next steps foreseen to consolidate the disperser baseline for WST.

astro-ph.IM↗

arXiv2026

WST, the wide-field spectroscopic telescope: progress on the design of the instruments

WST, the Wide-field Spectroscopic Telescope is a proposed new facility that will provide a transformational gain in spectroscopic survey capability over existing facilities. The WST is a 12 metre class telescope equipped with instrumentation to provide simultaneous observations in both multiple-object spectroscopy and integral field spectroscopy modes. This paper will describe the status of the instruments being designed for the WST, the fibre positioner module, the low and high-resolution multiple object spectrographs, the integral field spectrograph, disperser technology, sustainable detector and cryostat technology, and the calibration system. An overview of the overall layout of the instruments within the WST facility will be provided.

astro-ph.IM↗

arXiv2026

The Wide-field Spectroscopic Telescope (WST): design trade-offs for the low-resolution multi-object spectrograph instrument

The Wide-field Spectroscopic Telescope (WST) is a planned 12-meter-class dedicated spectroscopic facility designed to address key scientific challenges through large spectroscopic surveys. This paper presents design and performance trade-offs for the Low-Resolution Multi-Object Spectrograph (MOS-LR) instrument. With a multiplex of 30,000 covering a field of view of 3.1 square degrees, this instrument will provide unprecedented survey efficiency, an order of magnitude beyond those of current facilities. Covering the 370 to 930 nm range at a resolving power of 3,000 with a sky-projected fiber diameter of 1 arcsec, this instrument faces extreme challenges in design, manufacturing, and maintenance. We present a systematic approach to trading off optical and mechanical design options, taking into account constraints such as volume and mass, but also projected availability of detectors and gratings etc.

astro-ph.IM↗

arXiv2026

ChamaleoNet: Programmable Passive Probe for Enhanced Visibility on Erroneous Traffic

Traffic visibility remains a key component for management and security operations. Observing erroneous traffic, i.e., unanswered requests or error messages, is fundamental to detecting misconfiguration, temporary failures or attacks. ChamaleoNet transforms any production network into a transparent monitor to let administrators collect such erroneous traffic. ChamaleoNet is programmed to ignore well-formed traffic and record only erroneous packets, including those generated by misconfigured or infected internal hosts, and those sent by external actors that scan for services. Engineering such a system poses several challenges, from scalability to privacy. Leveraging the Software-Defined Networking (SDN) paradigm, ChamaleoNet processes the humongous amount of traffic flowing through the network border and focuses on erroneous packets only, lowering the pressure on the collection system. Moreover, it offers traffic anonymisation to conform to privacy regulations. ChamaleoNet enables the seamless integration with active deceptive systems like honeypots that can impersonate hosts/ports/services and engage with senders. In an operational scenario, we show that the SDN in-hardware filtering reduces the traffic to the controller by 90%, resulting in a scalable solution, which we offer as open source. Simple statistical analytics unveil the precious information carried by erroneous traffic. We discover internal misconfigured and infected hosts, identify temporary failures, and show enhanced visibility on attackers' scanning activities that look for vulnerable services.

cs.CR↗

arXiv2026

HRMOS: a very high-resolution, multi-object spectrograph for the ESO VLT

HRMOS (High-Resolution Multi-Object Spectrograph) is a proposed new instrument for the ESO Very Large Telescope (VLT) developed in the context of the ESO VLT Beyond 2030 call. It is designed to fill a unique and currently unoccupied region in the observational landscape: the combination of very high spectral resolution (R=80,000) with multi-object capability (50-60 simultaneous targets), a radial-velocity (RV) precision of 10m/s, and coverage of three key spectral windows (385-421nm, 480-522nm, 623-677nm). Scientifically, HRMOS will address a rich portfolio of high-priority astrophysical questions spanning from f giant exoplanet formation, to nucleocosmochronology and constraints on cosmological parameter, to probing hierarchical galaxy assembly outside the Milky Way. The instrument is based on a modular approach and it consists in four primary subsystems, the Front End with a hybrid fiber-positioning and atmospheric dispersion correction (ADC) architecture, the Fiber Link with double-scrambling and the image slicers, three spectrographs based on volume phase holographic (VPH) gratings covering the three spectral ranges and a Calibration Unit.

astro-ph.IM↗

arXiv2026

MORFEO: Advancing Towards Final Design

The Multiconjugate adaptive Optics Relay For ELT Observations (MORFEO) is a first-generation adaptive optics module for the Extremely Large Telescope (ELT), designed to deliver a diffraction-limited, highly uniform 53x53 arcsec field of view to the MICADO near-infrared camera. As the project advances toward its Final Design Review (FDR), significant consolidations have been achieved across all subsystems. This paper presents an updated overview of the MORFEO system, highlighting its dual operational modes (MCAO and SCAO) and recent developments in its opto-mechanical architecture. We dedicate specific focus to the core adaptive hardware, detailing the fifth-generation post-focal deformable mirrors, the highly complex Laser Guide Star (LGS) objective zoom system required to track sodium layer variations, and the Natural Guide Star (NGS) low-order and reference sensing strategies. Furthermore, we detail the advanced pseudo-open-loop control strategy managed by a split Hard and Soft Real-Time Computer architecture. Finally, we report the latest end-to-end performance estimations obtained via the SPECULA simulation framework, demonstrating compliance with the stringent Strehl Ratio and sky coverage requirements under median atmospheric conditions.

astro-ph.IM↗

arXiv2026

HRMOS: A High-Resolution Multi-Object Spectrograph for the VLT

This White Paper presents the scientific rationale and instrument concept for HRMOS (High-Resolution Multi-Object Spectrograph), a next-generation instrument proposed for the ESO Very Large Telescope within the VLT 2030 roadmap. Current and planned facilities offer either multi-object spectroscopy or ultra-high spectral resolution, but not both. HRMOS fills this gap by combining very high spectral resolution, multi-object capability, and radial-velocity stability, enabling transformative studies in Galactic and extragalactic astrophysics. The baseline design provides a resolving power of R = 80000, radial-velocity precision of 10 m s-1 (goal: 5 m s-1), simultaneous observations of 50-60 targets, and broad optical coverage down to 385 nm. These capabilities enable precise measurements of elemental abundances, isotopic ratios, line profiles, and radial velocities for large stellar samples, including crowded fields, star clusters, the Galactic bulge, and nearby dwarf galaxies. HRMOS will address key questions on the age of the oldest stellar populations through nucleocosmochronology, the formation and survival of planetary systems, the assembly history of the Milky Way and satellites, the origin of the heaviest elements, stellar evolution, and the chemical and dynamical properties of the interstellar and circumgalactic medium. It will bridge large spectroscopic surveys and the next generation of extremely large telescopes, with strong synergies with 4MOST, Gaia, TESS, PLATO, the proposed Haydn mission, and future ELT instruments. Building on VLT/FLAMES heritage, HRMOS represents a strategic investment for European astronomy in the 2030s.

astro-ph.IM↗

arXiv2026

Current status of the High-Resolution Multi-Object Spectrograph (MOS-HR) for the Wide-field Spectroscopic Telescope

The Wide-field Spectroscopic Telescope (WST) is a planned 12-meter class dedicated spectroscopic facility for massive spectroscopic surveys. This paper presents the current status of Work Package 4.5, the High Resolution Multi-Object Spectrograph (HR-MOS) module. We describe the international team organization and optical design resulting from extensive trade-off studies, presenting its evolution driven by scientific requirements and technical constraints. Design parameters derived from science cases and astronomical community requirements are detailed. Given the critical importance of mass and volume budgets, we present envelope dimensions and mass estimates for HR-MOS. The spectrograph constructive parameters are defined, including optical fiber specifications, multiplex capability, and modular architecture. Finally, we present the structural analysis addressing mechanical stability and performance requirements for this high-resolution multi-object spectrograph.

astro-ph.IM↗

arXiv2025

Photosensitive materials for neutron optics

Photosensitive materials with ever-improving properties are of great importance for optical and photonics applications. Additionally, they are extremely useful for designing components for neutron optical devices. We provide an overview on materials that have been tested and successfully used to control beams of cold and very cold neutrons based on diffractive elements. Artificial gratings are generated and optimized for the specific application in mind. We discuss the needs of the neutron optics community and highlight the progress obtained during the last decade. Materials that have been employed so far along with their properties are summarized, outlining the most promising candidates for the construction of an interferometer for very cold neutrons.

physics.optics↗

arXiv2024

Little iLocater: paving the way for iLocater

Diffraction-limited radial velocity instruments offer a pathway towards improved precision and stability, and the exploration of new parameter spaces at high spatial and spectral resolution. However, achieving the necessary performance requires careful instrument design and considerable on-sky testing. We describe the design and construction of ``Little iLocater'' (Lili), a compact spectrograph that has been used to validate the performance of the front-end fibre-injection system of the iLocater spectrograph. We present the design, assembly, and performance using on-sky data obtained at the Large Binocular Telescope (LBT), including extraction of spectra from standard stars, testing of the atmospheric dispersion corrector to elevations of 40 degrees, and spatially resolved spectra from close companion systems. These results show the front-end fibre-injection system is performing as expected and is indicative of iLocater's capabilities once installed at the LBT.

astro-ph.IM↗

arXiv2024

Recent and Upcoming Upgrades for MIRC-X and MYSTIC on the CHARA Array

MIRC-X and MYSTIC are six-telescope near-infrared beam (1.08-2.38 $μ$m) combiners at the CHARA Array on Mt Wilson CA, USA. Ever since the commissioning of MIRC-X (J and H bands) in 2018 and MYSTIC (K bands) in 2021, they have been the most popular and over-subscribed instruments at the array. Observers have been able to image stellar objects with sensitivity down to 8.1 mag in H and 7.8 mag in K-band under the very best conditions. In 2022 MYSTIC was upgraded with a new ABCD mode using the VLTI/GRAVITY 4-beam integrated optics chip, with the goal of improving the sensitivity and calibration. The ABCD mode has been used to observe more than 20 T Tauri stars; however, the data pipeline is still being developed. Alongside software upgrades, we detail planned upgrades to both instruments in this paper. The main upgrades are: 1) Adding a motorized filter wheel to MIRC-X along with new high spectral resolution modes 2) Updating MIRC-X optics to allow for simultaneous 6T J+H observations 3) Removing the warm window between the spectrograph and the warm optics in MYSTIC 4) Adding a 6T ABCD mode to MIRC-X in collaboration with CHARA/SPICA 5) Updating the MIRC-X CRED-ONE camera funded by Prof. Kraus from U. Exeter 6) Carrying out science verification of the MIRC-X polarization mode 7) Developing new software for ABCD-mode data reduction and more efficient calibration routines. We expect these upgrades to not only improve the observing experience, but also increase the sensitivity by 0.4 mag in J+H-bands, and 1 mag in K-band.

astro-ph.IM↗

arXiv2024

Automated scheduler for the SOXS instrument: design and performance

We present the advancements in the development of the scheduler for the Son Of X-shooter instrument at the ESO-NTT 3.58-m telescope in La Silla, Chile. SOXS is designed as a single-object spectroscopic facility and features a high-efficiency spectrograph with two arms covering the spectral range of 350-2000 nm and a mean resolving power of approximately R=4500. It will conduct UV-visible and near-infrared follow-up observations of astrophysical transients, drawing from a broad pool of targets accessible through the streaming services of wide-field telescopes, both current and future, as well as high-energy satellites. The instrument will cater to various scientific objectives within the astrophysical community, each entailing specific requirements for observation planning. SOXS will operate at the European Southern Observatory (ESO) in La Silla, without the presence of astronomers on the mountain. This poses a unique challenge for the scheduling process, demanding a fully automated algorithm that is autonomously interacting with the appropriate databases and the La Silla Weather API, and is capable of presenting the operator not only with an ordered list of optimal targets (in terms of observing constraints) but also with optimal backups in the event of changing weather conditions. This imposes the necessity for a scheduler with rapid-response capabilities without compromising the optimization process, ensuring the high quality of observations and best use of the time at the telescope. We thus developed a new highly available and scalable architecture, implementing API Restful applications like Docker Containers, API Gateway, and Python-based Flask frameworks. We provide an overview of the current state of the scheduler, which is now ready for the approaching on-site testing during Commissioning phase, along with insights into its web interface and preliminary performance tests.

astro-ph.IM↗

arXiv2024

A Precision Cryogenic Positioning Stage for Detector Dithering and Flexure Compensation

This paper presents the design and technical progress of a precision X-Y stage for detector dithering and flexure compensation. The stage is being developed for use in the Magellan InfraRed Multi-Object Spectrograph, MIRMOS. MIRMOS is a very large Nasmyth mounted spectrograph containing a combination of refractive, reflective and diffractive optics mounted on a long cryogenic optical bench. The instrument utilizes five science cameras, each having a custom x-y stage to control the in-plane detector position within each camera, providing both dithering capability for improved sampling, and flexure compensation to correct for image motion that results from the gravity variant operation of the instrument. Designed to operate at 120~K, the stage will accurately control detector position in two orthogonal degrees of freedom, and have manual fine adjustment features to set detector tip, tilt and piston. The piezo-driven flexure stage provides high-resolution backlash-free motion of the detector and is very compact along the optical path, keeping camera length to a minimum. A magnetoresistive bridge provides position feedback in each degree of freedom, greatly reducing hysteresis, which is common in piezoelectric actuators. The system is designed to operate in open loop using a lookup table keyed to the Nasmyth rotator angle for flexure control. Here, the optomechanical design of the stage, electrical control system, and current performance results from early prototype efforts are presented and discussed.

astro-ph.IM↗

arXiv2024

A Novel Freeform Slicer IFU for the Magellan InfraRed Multi-Object Spectrograph (MIRMOS)

The Magellan InfraRed Multi-Object Spectrograph (MIRMOS) is a planned next generation multi-object and integral field spectrograph for the 6.5m Magellan telescopes at Las Campanas Observatory in Chile. MIRMOS will perform R$\sim$3700 spectroscopy over a simultaneous wavelength range of 0.886 - 2.404$μ$m (Y,J,H,K bands) in addition to imaging over the range of 0.7 - 0.886$μ$m. The integral field mode of operation for MIRMOS will be achieved via an image slicer style integral field unit (IFU) located on a linear stage to facilitate movement into the beam during use or storage while operating in multi-object mode. The IFU will provide a $\rm \sim20"\times26"$ field of view (FoV) made up of $\rm0.84"\times26"$ slices. This will be the largest FoV IFS operating at these wavelengths from either the ground or space, making MIRMOS an ideal instrument for a wide range of science cases including studying the high redshift circumgalactic medium and emission line tracers from ionized and molecular gas in nearby galaxies. In order to achieve the desired image quality and FoV while matching the focal ratio to the multi-object mode, our slicer design makes use of novel freeform surfaces for the pupil mirrors, which require the use of high precision multi-axis diamond milling to manufacture. We present here the optical design and predicted performance of the MIRMOS IFU along with a conceptual design for the opto-mechanical system.

astro-ph.IM↗

arXiv2024

The Blue Multi Unit Spectroscopic Explorer (BlueMUSE) on the VLT: characterization of two VPHG prototypes based on dichromated gelatin and photopolymer recording materials

Volume-phase holographic gratings (VPHGs) are widely used in astronomical spectrographs due to their adaptability and high diffraction efficiency. Most VPHGs in operation use dichromated gelatin as a recording material, whose performance is sensitive to the coating and development process, especially in the near-UV. In this letter, we present the characterization of two UV-blue VPHG prototypes for the BlueMUSE integral field spectrograph on the VLT, based on dichromated gelatin and the Bayfol$\circledR$HX photopolymer film as recording materials. Our measurements show that both prototypes meet the required diffraction efficiency and exhibit similar performance with a wavelength-average exceeding 70% in the 350-580 nm range. Deviations from theoretical models increase towards 350 nm, consistently with previous studies on similar gratings. We also report similar performances in terms spatial uniformity and grating-to-grating consistency. Likewise, no significant differences in wavefront error or scattered light are observed between the prototypes.

astro-ph.IM↗

arXiv2024

WST -- Widefield Spectroscopic Telescope: addressing the instrumentation challenges of a new 12m class telescope dedicated to widefield Multi-object and Integral Field Spectroscopy

WST - Widefield Spectroscopic Telescope: We summarise the design challenges of instrumentation for a proposed 12m class Telescope that aims to provide a large (>2.5 square degree) field of view and enable simultaneous Multi-object (> 20,000 objects) and Integral Field spectroscopy (inner 3x3 arcminutes field of view), initially at visible wavelengths. For the MOS mode, instrumentation includes the fiber positioning units, fiber runs and the high (R~40,000) and low (R~3,000 - 4,000) resolution spectrographs. For the MUSE like Integral Field Spectrograph, this includes the relay from the Telescope Focal Plane, the multi-stage splitting and slicing and almost 150 identical spectrographs. We highlight the challenge of mass production at a credible cost and the issues of maintenance and sustainable operation.

astro-ph.IM↗

arXiv2024

Demonstration of a Networked Music Performance Experience with MEVO

In this paper we present a Networked Music Performance system currently under development at Politecnico di Torino. We demonstrate its use in a distributed concert held in June 2023, which featured three musicians in Turin (Italy) and three musicians in Wrocław (Poland). Although in its early stages, the system proved to be already stable enough to appear transparent to the remote audience.

cs.NI↗

arXiv2023

The wide-field, multiplexed, spectroscopic facility WEAVE: Survey design, overview, and simulated implementation

WEAVE, the new wide-field, massively multiplexed spectroscopic survey facility for the William Herschel Telescope, will see first light in late 2022. WEAVE comprises a new 2-degree field-of-view prime-focus corrector system, a nearly 1000-multiplex fibre positioner, 20 individually deployable 'mini' integral field units (IFUs), and a single large IFU. These fibre systems feed a dual-beam spectrograph covering the wavelength range 366$-$959\,nm at $R\sim5000$, or two shorter ranges at $R\sim20\,000$. After summarising the design and implementation of WEAVE and its data systems, we present the organisation, science drivers and design of a five- to seven-year programme of eight individual surveys to: (i) study our Galaxy's origins by completing Gaia's phase-space information, providing metallicities to its limiting magnitude for $\sim$3 million stars and detailed abundances for $\sim1.5$ million brighter field and open-cluster stars; (ii) survey $\sim0.4$ million Galactic-plane OBA stars, young stellar objects and nearby gas to understand the evolution of young stars and their environments; (iii) perform an extensive spectral survey of white dwarfs; (iv) survey $\sim400$ neutral-hydrogen-selected galaxies with the IFUs; (v) study properties and kinematics of stellar populations and ionised gas in $z<0.5$ cluster galaxies; (vi) survey stellar populations and kinematics in $\sim25\,000$ field galaxies at $0.3\lesssim z \lesssim 0.7$; (vii) study the cosmic evolution of accretion and star formation using $>1$ million spectra of LOFAR-selected radio sources; (viii) trace structures using intergalactic/circumgalactic gas at $z>2$. Finally, we describe the WEAVE Operational Rehearsals using the WEAVE Simulator.

astro-ph.IM↗