arXiv subjects

Andrea Li Bassi

Publications and source records attributed to Andrea Li Bassi.

At least 19 recordsLinked to original sources

arXiv2026

Multiwavelength Raman investigation of mono- and few-layer MoS2 grown by Pulsed Laser Deposition on SiO2

Molybdenum disulfide (MoS$_2$) is a semiconductor whose vibrational and excitonic properties are highly sensitive to layer number and structural disorder. We demonstrate the growth of MoS$_2$ monolayers on inert, electronics-compatible SiO$_2$ substrates using room-temperature pulsed laser deposition (PLD). Control of the process parameters enables tuning from monolayer to multilayer films, which we investigate by multiwavelength Raman spectroscopy. The evolution of the Raman-shift difference between the $E_{2g}^{1}$ and $A_{1g}$ modes, combined with an assessment of defect density, tracks film growth as a function of the number of deposition laser pulses. Although excitonic effects strongly influence the optical response of two-dimensional transition-metal dichalcogenides, experimental reports of symmetry-selective exciton-phonon coupling remain limited. We provide experimental evidence of symmetry-dependent exciton-phonon coupling in PLD-grown monolayer MoS$_2$. Specifically, we observe modulation of the resonant behaviour of the out-of-plane $A_{1g}$ and in-plane $E_{2g}^{1}$ modes, related to their different coupling to A excitons, predominantly derived from Mo $d_{z^2}$ orbitals, and C excitons, characterized by mixed orbital contributions from Mo $d_{z^2}$ and S $p_x$ and $p_y$ states. Comparison with mechanically exfoliated monolayers reveals the role of growth-induced defects in modulating these interactions. These findings establish room-temperature PLD as a viable approach for growing two-dimensional MoS$_2$ on inert, electronics-compatible substrates and provide insight into the interplay between excitonic resonances and growth-induced disorder in two-dimensional MoS$_2$.

cond-mat.mtrl-sci↗

arXiv2026

Iron-mediated on-surface synthesis of substrate-decoupled graphdiyne monolayers

Graphdiynes are emerging two-dimensional sp-sp$^2$ carbon materials with electronic structures complementing those of graphene, yet their on-surface synthesis is limited by the persistence of metalated intermediates or yields disordered covalent networks. Here, we report an iron-assisted route to covalent hydrogenated graphdiyne monolayers on Au(111) from 1,3,5-tris(bromoethynyl)benzene. Low-temperature scanning tunnelling microscopy, X-ray photoelectron spectroscopy and density functional theory show that Fe scavenges chemisorbed Br byproducts forming FeBr$_2$, in turn promoting the removal of Au adatoms from the organometallic network, thus enabling its metalated-to-covalent conversion under mild thermal treatment. Subsequent annealing removes FeBr$_2$ and yields covalent, ordered domains weakly coupled to the substrate. Scanning tunnelling spectroscopy, combined with density functional theory, reveals a semiconducting gap of about 1.6 eV associated with carbon p$_z$ frontier orbitals. This Fe-mediated on-surface synthesis strategy provides a route to atomically precise, weakly substrate-coupled graphdiyne networks and offers a design principle for two-dimensional carbon semiconductors.

cond-mat.mtrl-sci↗

arXiv2026

2D abrupt nano-junctions blending sp-sp2 bonds on atomically precise heterostructures

Two-dimensional heterostructures combining sp-sp2 hybridization,blending graphene with graphyne-based allotropes, offer substantial potential for enhancing the tunability of electronic and transport properties while providing significant structural flexibility. These attributes are desirable for next generation nanoscale electronic applications. Despite such potential, their experimental realization remains elusive, as synthesized carbon heterostructures are limited to doped, graphene-based systems exhibiting exclusively sp2 hybridization. Here, we demonstrate the on-surface synthesis of covalently bonded sp-sp2 lateral heterostructures between graphene nanoribbons and graphdiyne networks on Au(111). Atomic-resolution scanning tunnelling microscopy, combined with density functional theory, reveals the formation mechanism of the covalent interfacial bonds between nanoribbons and graphdiynes, also highlighting the key role of surface chemistry. Bromine atoms deriving from the molecules dehalogenation and chemisorbed along the nanoribbon inhibit the junction formation, but bonding efficiency can be boosted up to 71% by controlled removal of these by-products. Electronic structure and transport calculations show that the 2D heterostructure by itself is characterized by disentangled properties for the two subsystems, forming an atomically narrow junction enabling voltage-tunable spatial current separation in two dimensions. There results define a viable strategy for engineering graphene-based sp-sp2 heterostructures, paving the way for the design and synthesis of all-carbon nanoscale electronic architectures.

cond-mat.mtrl-sci↗

arXiv2025

Exploring the Growth Dynamics of Size-selected Carbon Atomic Wires with in situ UV Resonance Raman Spectroscopy

Short carbon atomic wires, the prototypes of the lacking carbon allotrope carbyne, represent the fundamental one-dimensional system and the first stage in carbon nanostructure growth, which still exhibits many open points regarding their growth and stability. We introduce an in situ UV resonance Raman approach for real-time monitoring of the growth of carbon atomic wires during pulsed laser ablation in liquid without perturbing the synthesis environment. We track single-chain species' growth dynamics, achieving size selectivity by exploiting the peculiar optoelectronic properties of carbon wires and the tunability of synchrotron radiation. We systematically explore diverse solvents, finding size- and solvent-dependent production rates linked to the solvent's C/H ratio and carbonization tendency. Carbon atomic wires' growth dynamics reveal a complex interplay between formation and degradation, leading to an equilibrium. Water, lacking in carbon atoms and reduced polyynes' solubility, yields fewer wires with rapid saturation. Organic solvents exhibit enhanced productivity and near-linear growth, attributed to additional carbon from solvent dissociation and low relative polarity. Exploring the dynamics of the saturation regime provides new insights into advancing carbon atomic wires' synthesis via PLAL. Understanding carbon atomic wires' growth dynamics can contribute to optimizing PLAL processes for nanomaterial synthesis.

physics.chem-ph↗

arXiv2025

Surface Sensitive Raman Response of Metal-Supported Monolayer MoS$_2$

The Raman spectrum of monolayer (ML) MoS$_2$ is remarkably affected by the interaction with metals. In this work we studied ML-MoS$_2$ supported by the Ag(111) and Ag(110) surfaces by using a combined experimental and theoretical approach. The MoS$_2$ layer was directly grown on atomically clean Ag(111) and Ag(110) surfaces by pulsed laser deposition, followed by in-situ thermal annealing under ultra-high vacuum conditions. The morphology and structure of the two systems were characterized in-situ by scanning tunneling microscopy, providing atomic-scale information on the relation between the MoS$_2$ lattice and the underlying surface. Raman spectroscopy revealed differences between the two MoS$_2$-metal interfaces, especially concerning the behavior of the out-of-plane $A'_1$ vibrational mode, which splits into two contributions on Ag(110). The metal-induced effects on MoS$_2$ vibrational modes are further evidenced by transferring MoS$_2$ onto a more inert substrate (SiO$_2$/Si), where the MoS$_2$ Raman response displays a more ``freestanding-like'' behavior. The experimental data were interpreted with the support of ab-initio calculations of the vibrational modes, which provided insight into the effect of interface properties, such as strain and out-of-plane distortion. Our results highlight the influence of the interaction with metals on MoS$_2$ vibrational properties, and show the high sensitivity of MoS$_2$ Raman modes to the surface structure of the supporting metal.

cond-mat.mtrl-sci↗

arXiv2025

Wettability and sp2/sp3 ratio effects on supercapacitor performance of N-doped hydrogenated amorphous Carbon Nanofoam

Pulsed laser-deposited amorphous carbon nanofoams are potential candidate for electrochemical energy storage applications due to ultra-light weight, large volumetric void fractions, and co-existence of sp, sp2 and sp3 carbon hybridization. It is known that charge storage in carbon nanostructures containing disordered sp2-domains is determined by their wettability, surface area, and porosity. However, their charge-storage performance is limited to the areal capacitance of the order of a few mF/cm2. We enhanced the supercapacitor performance of nitrogen-doped amorphous carbon nanofoam by engineering its wettability and sp2-C/sp3-C ratio by vacuum annealing. The specific capacitance was enhanced by about fifty times and the device voltage increased from 0.8 to 1.1 V compared to as-grown carbon nanofoam. In addition, we examined for the first time the initial increase in specific capacitance of the aqueous symmetric supercapacitor with respect to the scan rate, employing in-situ measurements coupling Raman spectroscopy and electrochemistry. We attribute this effect, observed but generally not explained in previous works in the literature, to the electrochemical activation induced by structural changes during the charge storage performance. This optimization of pulsed laser deposited carbon nanofoam may open an avenue for fabricating lightweight and porous nanostructures for advanced macro-to-micro-supercapacitor devices.

cond-mat.mtrl-sci↗

arXiv2024

Low-density functionalized amorphous carbon nanofoam as binder-free Supercapacitor electrode

Nanoporous carbon materials containing small domains of sp2-carbon with highly disordered structures are promising for supercapacitor applications. Herein, we synthesize amorphous carbon nanofoam with 98% volumetric void fraction and low mass density of around 30 mg/cm3 by pulsed laser deposition at room temperature. With the unavoidable oxygen functional groups on the nanoporous surface, carbon nanofoam and nitrogen-functionalized carbon nanofoams are directly grown on the desired substrate under different background gases (Ar, N2, N2-H2), and employed as supercapacitor electrodes. Among the background gases used in synthesis, the use of nitrogen yields nanofoam with higher thickness and more N-content with higher graphitic-N. From the test of amorphous carbon nanofoam supercapacitor device, nitrogenated amorphous carbon electrode shows a higher areal capacitance of 4.1 mF/cm2 at 20 mV/s in aqueous electrolyte, a better capacitance retention at higher current, and excellent cycle stability (98%) over 10000 charge-discharge cycles are achieved compared to not-functionalized counterpart prepared under Ar background gas (2.7 mF/cm2 and cycle stability of 88%).

physics.app-ph↗

arXiv2024

Three-dimensional nanoscale control of magnetism in crystalline Yttrium Iron Garnet

The exceptional magnetic, optical and phononic properties of Yttrium Iron Garnet (YIG) make it unique for spin-wave based and photonic applications. Yet, nanostructuring crystalline YIG and manipulating its magnetism in a non-destructive way is an outstanding challenge, and so far mostly limited to two-dimensional capabilities. Here, we show that irradiation of single-crystal YIG films with a focused UV laser drives a stable, giant enhancement of the perpendicular magnetic anisotropy, preserving the crystalline quality. This modulation is highly confined at the nanoscale in both the lateral and vertical directions, and its extension within the volume can be finely tuned with a continuous depth-control. By harnessing these three-dimensional anisotropy profiles, we demonstrate a large tuning of the spin-wave band structure, volume spatial localization, and non-reciprocity, realizing proof-of-principle 3D magnonic crystals. This straightforward, single-step, laser nanofabrication of three-dimensional magnetic systems based on crystalline YIG thin films opens the way to design novel functions in magnonic and magneto-optic devices.

cond-mat.mtrl-sci↗

arXiv2024

Ballistic-aggregated Carbon Nanofoam in Target-side of Pulsed Laser Deposition for Energy Storage Applications

In pulsed laser deposition, along the traditionally exploited deposition on the front-side of the plasma-plume, a coating forms on the surface of the target as well. For reproducibility, this residue is usually cleaned and discarded. Here we instead investigate the target-side coated materials and employ them as a binder-free supercapacitor electrode. The ballistic-aggregated, target-side nanofoam is compact and features a larger fraction of sp2-carbon, higher nitrogen content with higher graphitic-N and lower oxygen content with fewer COOH groups than that of diffusive-aggregated conventional nanofoams. They are highly hydrogenated graphite-like amorphous carbon and superhydrophilic. The resulting symmetric micro-supercapacitor delivers higher volumetric capacitance of 522 mF/cm3 at 100 mV/s and 104% retention after 10000 charge-discharge cycles over conventional nanofoam (215 mF/cm3 and 85% retention) with an areal capacitance of 134 μF/cm2 at 120 Hz and ultrafast frequency response. Utilizing the normally discarded target-side material can therefore enable high performing devices while reducing waste, cost and energy input per usable product. leading towards a greater sustainability on nanomaterials synthesis and deposition techniques.

physics.app-ph↗

arXiv2024

Unravelling the Band Structure and Orbital Character of a $π$-Conjugated 2D Graphdiyne-Based Organometallic Network

Graphdiyne-based carbon systems generate intriguing layered sp-sp$^2$ organometallic lattices, characterized by flexible acetylenic groups connecting planar carbon units through metal centers. At their thinnest limit, they can result in two-dimensional (2D) organometallic networks exhibiting unique quantum properties and even confining the surface states of the substrate, which is of great importance for fundamental studies. In this work, we present the on-surface synthesis of a highly crystalline 2D organometallic network grown on Ag(111). The electronic structure of this mixed honeycomb-kagome arrangement - investigated by angle-resolved photoemission spectroscopy and scanning tunneling spectroscopy - reveals a strong electronic conjugation within the network, leading to the formation of two intense electronic band-manifolds. In comparison to theoretical density functional theory calculations, we observe that these bands exhibit a well-defined orbital character that can be associated with distinct regions of the sp-sp$^2$ monomers. Moreover, we find that the halogen by-products resulting from the network formation locally affect the pore-confined states, causing a significant energy shift. This work contributes to the understanding of the growth and electronic structure of graphdiyne-like 2D networks, providing insights into the development of novel carbon materials beyond graphene with tailored properties.

cond-mat.mes-hall↗

arXiv2022

Steric hindrance in the on-surface synthesis of diethynyl-linked anthracene polymers

Hybrid sp-sp2 structures can be efficiently obtained on metal substrates via on-surface synthesis. The choice of both the precursor and of the substrate impacts on the effectiveness of the process and the stability of the formed structures. Here we demonstrate that using anthracene-based molecules as precursor, the formation on Au(111) of polymers hosting sp carbon chains is affected by the steric hindrance between aromatic groups. In particular, by scanning tunneling microscopy and density functional theory calculations we show that the de-metalation of organometallic structures induces a lateral separation of adjacent polymers preventing the formation of ordered domains.

cond-mat.mtrl-sci↗

arXiv2021

In situ surface-enhanced Raman spectroscopy to investigate polyyne formation during pulsed laser ablation in liquid

The synthesis of polyynes during their formation by pulsed laser ablation in liquid (i.e. acetonitrile) has been analyzed by in-situ surface-enhanced Raman spectroscopy (SERS). A polyethylene pellet, functionalized with silver nanoparticles and placed into the ablation medium, served as SERS active surface. This innovative approach granted the possibility to investigate the dynamics of formation and degradation of polyynes with a time-resolution of a few seconds, starting from the early stages of ablation when the concentration is low. The processes occurring during the synthesis have been studied comparing the in-situ SERS signal of polyynes and byproducts in the solution. The different kinetics of short and long polyynes have been investigated by their in-situ SERS signal, exploring the final distribution of chain lengths. Ex situ UV-Vis and high-performance liquid chromatography confirmed the observations gained from in-situ SERS data and validated this innovative in-situ and in-operando analysis.

physics.chem-ph↗

arXiv2020

Structural, Electronic, and Vibrational Properties of 2D Graphdiyne-Like Carbon Nanonetwork Synthesized on Au(111): Implications for the Engineering of sp-sp2 Carbon Nanostructures

Graphdiyne, atomically-thin 2D carbon nanostructure based on sp-sp2 hybridization, is an appealing system potentially showing outstanding mechanical and optoelectronic properties. Surface-catalyzed coupling of halogenated sp-carbon-based molecular precursors represents a promising bottom-up strategy to fabricate extended 2D carbon systems with engineered structure on metallic substrates. Here, we investigate the atomic-scale structure and electronic and vibrational properties of an extended graphdiyne-like sp-sp2 carbon nanonetwork grown on Au(111) by means of on-surface synthesis. The formation of such 2D nanonetwork at its different stages as a function of the annealing temperature after the deposition is monitored by scanning tunneling microscopy (STM), Raman spectroscopy and combined with density functional theory (DFT) calculations. High-resolution STM imaging and the high sensitivity of Raman spectroscopy to the bond nature provide a unique strategy to unravel the atomic-scale properties of sp-sp2 carbon nanostructures. We show that hybridization between the 2D carbon nanonetwork and the underlying substrate states strongly affects its electronic and vibrational properties, modifying substantially the density of states and the Raman spectrum compared to the free standing system. This opens the way to the modulation of the electronic properties with significant prospects in future applications as active nanomaterials for catalysis, photoconversion and carbon-based nanoelectronics.

cond-mat.mtrl-sci↗

arXiv2020

Solvent-dependent termination, size and stability in polyynes synthesis by laser ablation in liquids

In recent years there has been a growing interest in sp-carbon chains as possible novel nanostructures. An example of sp-carbon chains are the so-called polyynes, characterized by the alternation of single and triple bonds that can be synthesized by pulsed laser ablation in liquid (PLAL) of a graphite target. In this work, by exploiting different solvents in the PLAL process, e.g. water, acetonitrile, methanol, ethanol, and isopropanol, we systematically investigate the solvent role in polyyne formation and stability. The presence of methyland cyano-groups in the solutions influences the termination of polyynes, allowing to detect, in addition to hydrogen-capped polyynes up to HC22H, methyl-capped polyynes up to 18 carbon atoms (i.e. HCnCH3) and cyanopolyynes up to HC12CN. The assignment of each species was done by UV-Vis spectroscopy and supported by density functional theory simulations of vibronic spectra. In addition, surface-enhanced Raman spectroscopy allowed to observe differences, due to different terminations (hydrogen, methyl-and cyano group), in the shape and positions of the characteristic Raman bands of the size-selected polyynes. The evolution in time of each polyyne has been investigated evaluating the chromatographic peak area, and the effect of size, terminations and solvents on polyynes stability has been individuated.

cond-mat.mtrl-sci↗

arXiv2020

In situ synthesis of polyynes in a polymer matrix by pulsed laser ablation in liquid

Polyynes are finite chains formed by sp-hybridized carbon atoms with alternating single and triple bonds and displaying intriguing electronic and optical properties. Pulsed laser ablation in liquid (PLAL) is a well assessed technique for the physical synthesis of hydrogen-capped polyynes in solution, however, their limited stability prevents further exploitation in materials for different applications. In this work, polyynes in poly(vinyl alcohol) (PVA) were produced in a single-step PLAL process by ablating graphite directly in aqueous solution of PVA, investigating the role of polymer concentration. The presence of PVA solution, as a participating medium for PLAL, is shown to favour the formation of polyynes. The addition of Ag colloids to the aqueous PVA/polyynes solution allowed surface-enhanced Raman spectroscopy (SERS) measurements, carried out both on liquid samples and on free-standing nanocomposites, obtained after solvent evaporation. We show that polyynes in the nanocomposite remain stable at least for 11 months, whereas the corresponding PVA/Ag/polyynes solution displayed a strong polyyne reduction already after 3 weeks. These results open the view to further characterizations of the properties of polyyne-based films and materials.

physics.app-ph↗

arXiv2019

Size-selected polyynes synthesized by submerged arc discharge in water

Polyynes are linear sp-carbon chains of finite length consisting in a sequence of alternated single and triple bonds and displaying appealing optical and electronic properties. A simple, low cost and scalable production technique for polyynes is the submerged arc discharge (SAD) in liquid, which so far, has been mainly exploited in organic solvents. In this work, we investigated in detail SAD in water as a cheap and non-toxic solvent for the production of polyynes. The role of process parameters such as current (10-25 A) and voltage (20-25 V) in the production yield have been investigated, as well as polyynes stability. Polyynes terminated by hydrogen (CnH2: n=6-16) were identified by High-Performance Liquid Chromatography (HPLC) coupled with UV-Visible absorption spectroscopy and with the support of density functional theory (DFT) calculations. Size-selected polyynes separated by HPLC were analyzed by surface enhanced Raman spectroscopy (SERS). The formation process was monitored by in situ SERS using an immersed fiber-optic Raman probe and employing Ag nanoparticles directly produced in the solution by SAD.

cond-mat.mtrl-sci↗

arXiv2015

Controlling the Electrical Properties of Undoped and Ta-doped TiO2 Polycrystalline Films via Ultra-Fast Annealing Treatments

We present a study on the crystallization process of undoped and Ta doped TiO2 amorphous thin films. In particular, the effect of ultra-fast annealing treatments in environments characterized by different oxygen concentrations is investigated via in-situ resistance measurements. The accurate examination of the key parameters involved in this process allows us to reduce the time needed to obtain highly conducting and transparent polycrystalline thin films (resistivity about $6 \times 10^{-4}$ Ωcm, mean transmittance in the visible range about $81\%$) to just 5 minutes (with respect to the 180 minutes required for a standard vacuum annealing treatment) in nitrogen atmosphere (20 ppm oxygen concentration) at ambient pressure. Experimental evidence of superficial oxygen incorporation in the thin films and its detrimental role for the conductivity are obtained by employing different concentrations of traceable 18O isotopes during ultra-fast annealing treatments. The results are discussed in view of the possible implementation of the ultra-fast annealing process for TiO2-based transparent conducting oxides as well as electron selective layers in solar cell devices; taking advantage of the high control of the ultra-fast crystallization processes which has been achieved, these two functional layers are shown to be obtainable from the crystallization of a single homogeneous thin film.

cond-mat.mtrl-sci↗

arXiv2013

Enhancing Light Harvesting by Hierarchical Functionally Graded Transparent Conducting Al-doped ZnO Nano- and Mesoarchitectures

A functionally graded Al-doped ZnO structure is presented which combines conductivity, visible transparency and light scattering with mechanical flexibility. The nano and meso-architecture, constituted by a hierarchical, large surface area, mesoporous tree-like structure evolving in a compact layer, is synthesized at room temperature and is fully compatible with plastic substrates. Light trapping capability is demonstrated by showing up to 100% improvement of light absorption of a low bandgap polymer employed as the active layer.

cond-mat.mtrl-sci↗