arXiv subjects

Andrea Zen

Publications and source records attributed to Andrea Zen.

At least 37 records · Page 2Linked to original sources

arXiv2022

Long range ionic and short range hydration effects govern strongly anisotropic clay nanoparticle interactions

The aggregation of clay particles in aqueous solution is a ubiquitous everyday process of broad environmental and technological importance. However, it is poorly understood at the all-important atomistic level since it depends on a complex and dynamic interplay of solvent-mediated electrostatic, hydrogen-bonding, and dispersion interactions. With this in mind we have performed an extensive set of classical molecular dynamics simulations (included enhanced sampling simulations) on the interactions between model kaolinite nanoparticles in pure and salty water. Our simulations reveal highly anisotropic behaviour in which the interaction between the nanoparticles varies from attractive to repulsive depending on the relative orientation of the nanoparticles. Detailed analysis reveals that at large separation (>1.5 nm) this interaction is dominated by electrostatic effects whereas at smaller separations the nature of the water hydration structure becomes critical. This study highlights an incredible richness in how clay nanoparticles interact, which should be accounted for in e.g. coarse grained models of clay nanoparticle aggregation.

cond-mat.soft↗

arXiv2021

Defect-Dependent Corrugation in Graphene

Graphene's intrinsically corrugated and wrinkled topology fundamentally influences its electronic, mechanical, and chemical properties. Experimental techniques allow the manipulation of pristine graphene and the controlled production of defects which allows to control the atomic out-of-plane fluctuations and, thus, tune graphene's properties. Here, we perform large scale machine learning-driven molecular dynamics simulations to understand the impact of defects on the structure of graphene. We find that defects cause significantly higher corrugation leading to a strongly wrinkled surface. The magnitude of this structural transformation strongly depends on the defect concentration and specific type of defect. Analysing the atomic neighborhood of the defects reveals that the extent of these morphological changes depends on the preferred geometrical orientation and the interactions between defects. While our work highlights that defects can strongly affect graphene's morphology, it also emphasises the differences between distinct types by linking the global structure to the local environment of the defects.

cond-mat.mtrl-sci↗

arXiv2020

Hydration of NH$_4^+$ in Water: Bifurcated Hydrogen Bonding Structures and Fast Rotational Dynamics

Understanding the hydration and diffusion of ions in water at the molecular level is a topic of widespread importance. The ammonium ion (NH$_4^+$) is an exemplar system that has received attention for decades because of its complex hydration structure and relevance in industry. Here we report a study of the hydration and the rotational diffusion of NH$_4^+$ in water using ab initio molecular dynamics simulations and quantum Monte Carlo calculations. We find that the hydration structure of NH$_4^+$ features bifurcated hydrogen bonds, which leads to a rotational mechanism involving the simultaneous switching of a pair of bifurcated hydrogen bonds. The proposed hydration structure and rotational mechanism are supported by existing experimental measurements, and they also help to rationalize the measured fast rotation of NH$_4^+$ in water. This study highlights how subtle changes in the electronic structure of hydrogen bonds impacts the hydration structure, which consequently affects the dynamics of ions and molecules in hydrogen bonded systems.

physics.comp-ph↗

arXiv2020

TurboRVB: a many-body toolkit for {\it ab initio} electronic simulations by quantum Monte Carlo

TurboRVB is a computational package for {\it ab initio} Quantum Monte Carlo (QMC) simulations of both molecular and bulk electronic systems. The code implements two types of well established QMC algorithms: Variational Monte Carlo (VMC), and Diffusion Monte Carlo in its robust and efficient lattice regularized variant. A key feature of the code is the possibility of using strongly correlated many-body wave functions. The electronic wave function (WF) is obtained by applying a Jastrow factor, which takes into account dynamical correlations, to the most general mean-field ground state, written either as an antisymmetrized geminal product with spin-singlet pairing, or as a Pfaffian, including both singlet and triplet correlations. This wave function can be viewed as an efficient implementation of the so-called resonating valence bond (RVB) ansatz, first proposed by L. Pauling and P. W. Anderson in quantum chemistry and condensed matter physics, respectively. The RVB ansatz implemented in TurboRVB has a large variational freedom, including the Jastrow correlated Slater determinant as its simplest, but nontrivial case. Moreover, it has the remarkable advantage of remaining with an affordable computational cost, proportional to the one spent for the evaluation of a single Slater determinant. The code implements the adjoint algorithmic differentiation that enables a very efficient evaluation of energy derivatives, comprising the ionic forces. Thus, one can perform structural optimizations and molecular dynamics in the canonical NVT ensemble at the VMC level. For the electronic part, a full WF optimization is made possible thanks to state-of-the-art stochastic algorithms for energy minimization. The code has been efficiently parallelized by using a hybrid MPI-OpenMP protocol, that is also an ideal environment for exploiting the computational power of modern GPU accelerators.

physics.comp-ph↗

arXiv2019

A new scheme for fixed node diffusion quantum Monte Carlo with pseudopotentials: improving reproducibility and reducing the trial-wave-function bias

Fixed node diffusion quantum Monte Carlo (FN-DMC) is an increasingly used computational approach for investigating the electronic structure of molecules, solids, and surfaces with controllable accuracy. It stands out among equally accurate electronic structure approaches for its favorable cubic scaling with system size, which often makes FN-DMC the only computationally affordable high-quality method in large condensed phase systems with more than 100 atoms. In such systems FN-DMC deploys pseudopotentials to substantially improve efficiency. In order to deal with non-local terms of pseudopotentials, the FN-DMC algorithm must use an additional approximation, leading to the so-called localization error. However, the two available approximations, the locality approximation (LA) and the T-move approximation (TM), have certain disadvantages and can make DMC calculations difficult to reproduce. Here we introduce a third approach, called the determinant localization approximation (DLA). DLA eliminates reproducibility issues and systematically provides good quality results and stable simulations that are slightly more efficient than LA and TM. When calculating energy differences -- such as interaction and ionization energies -- DLA is also more accurate than the LA and TM approaches. We believe that DLA paves the way to the automization of FN-DMC and its much easier application in large systems.

physics.comp-ph↗

arXiv2019

Interaction between water and carbon nanostructures: How good are current density functional approximations?

Due to their current and future technological applications, including realisation of water filters and desalination membranes, water adsorption on graphitic sp$^{2}$-bonded carbon is of overwhelming interest. However, these systems are notoriously challenging to model, even for electronic structure methods such as density functional theory (DFT), because of the crucial role played by London dispersion forces and non-covalent interactions in general. Recent efforts have established reference quality interactions of several carbon nanostructures interacting with water. Here, we compile a new benchmark set (dubbed \textbf{WaC18}), which includes a single water molecule interacting with a broad range of carbon structures, and various bulk (3D) and two dimensional (2D) ice polymorphs. The performance of 28 approaches, including semi-local exchange-correlation functionals, non-local (Fock) exchange contributions, and long-range van der Waals (vdW) treatments, are tested by computing the deviations from the reference interaction energies. The calculated mean absolute deviations on the WaC18 set depends crucially on the DFT approach, ranging from 135 meV for LDA to 12 meV for PBE0-D4. We find that modern vdW corrections to DFT significantly improve over their precursors. Within the 28 tested approaches, we identify the best performing within the functional classes of: generalized gradient approximated (GGA), meta-GGA, vdW-DF, and hybrid DF, which are BLYP-D4, TPSS-D4, rev-vdW-DF2, and PBE0-D4, respectively.

cond-mat.mtrl-sci↗

arXiv2018

On the physisorption of water on graphene: Sub-chemical accuracy from many-body electronic structure methods

Molecular adsorption on surfaces plays a central role in catalysis, corrosion, desalination, and many other processes of relevance to industry and the natural world. Few adsorption systems are more ubiquitous or of more widespread importance than those involving water and carbon, and for a molecular level understanding of such interfaces water monomer adsorption on graphene is a fundamental and representative system. This system is particularly interesting as it calls for an accurate treatment of electron correlation effects, as well as posing a practical challenge to experiments. Here, we employ many-body electronic structure methodologies that can be rigorously converged and thus provide faithful references for the molecule-surface interaction. In particular, we use diffusion Monte-Carlo (DMC), coupled cluster (CCSD(T)), as well as the random phase approximation (RPA) to calculate the strength of the interaction between water and an extended graphene surface. We establish excellent, sub-chemical, agreement between the complementary high-level methodologies, and an adsorption energy estimate in the most stable configuration of approximately -100\,meV is obtained. We also find that the adsorption energy is rather insensitive to the orientation of the water molecule on the surface, despite different binding motifs involving qualitatively different interfacial charge reorganisation. In producing the first demonstrably accurate adsorption energies for water on graphene this work also resolves discrepancies amongst previously reported values for this widely studied system. It also paves the way for more accurate and reliable studies of liquid water at carbon interfaces with cheaper computational methods, such as density functional theory and classical potentials.

cond-mat.mtrl-sci↗

arXiv2018

Fast and accurate quantum Monte Carlo for molecular crystals

Computer simulation plays a central role in modern day materials science. The utility of a given computational approach depends largely on the balance it provides between accuracy and computational cost. Molecular crystals are a class of materials of great technological importance which are challenging for even the most sophisticated \emph{ab initio} electronic structure theories to accurately describe. This is partly because they are held together by a balance of weak intermolecular forces but also because the primitive cells of molecular crystals are often substantially larger than those of atomic solids. Here, we demonstrate that diffusion quantum Monte Carlo (DMC) delivers sub-chemical accuracy for a diverse set of molecular crystals at a surprisingly moderate computational cost. As such, we anticipate that DMC can play an important role in understanding and predicting the properties of a large number of molecular crystals, including those built from relatively large molecules which are far beyond reach of other high accuracy methods.

physics.chem-ph↗

arXiv2017

Communication: Truncated non-bonded potentials can yield unphysical behavior in molecular dynamics simulations of interfaces

Non-bonded potentials are included in most force fields and therefore widely used in classical molecular dynamics simulations of materials and interfacial phenomena. It is commonplace to truncate these potentials for computational efficiency based on the assumption that errors are negligible for reasonable cutoffs or compensated for by adjusting other interaction parameters. Arising from a metadynamics study of the wetting transition of water on a solid substrate, we find that the influence of the cutoff is unexpectedly strong and can change the character of the wetting transition from continuous to first order by creating artificial metastable wetting states. Common cutoff corrections such as the use of a force switching function, a shifted potential, or a shifted force do not avoid this. Such a qualitative difference urges caution and suggests that using truncated non-bonded potentials can induce unphysical behavior that cannot be fully accounted for by adjusting other interaction parameters.

physics.comp-ph↗

arXiv2017

Properties of the water to boron nitride interaction: from zero to two dimensions with benchmark accuracy

Molecular adsorption on surfaces plays an important part in catalysis, corrosion, desalination, and various other processes that are relevant to industry and in nature. As a complement to experiments, accurate adsorption energies can be obtained using various sophisticated electronic structure methods that can now be applied to periodic systems. The adsorption energy of water on boron nitride substrates, going from zero to 2-dimensional periodicity, is particularly interesting as it calls for an accurate treatment of polarizable electrostatics and dispersion interactions, as well as posing a practical challenge to experiments and electronic structure methods. Here, we present reference adsorption energies, static polarizabilities, and dynamic polarizabilities, for water on BN substrates of varying size and dimension. Adsorption energies are computed with coupled cluster theory, fixed-node quantum Monte Carlo (FNQMC), the random phase approximation (RPA), and second order Møller-Plesset (MP2) theory. These explicitly correlated methods are found to agree in molecular as well as periodic systems. The best estimate of the water/h-BN adsorption energy is $-107\pm7$ meV from FNQMC. In addition, the water adsorption energy on the BN substrates could be expected to grow monotonically with the size of the substrate due to increased dispersion interactions but interestingly, this is not the case here. This peculiar finding is explained using the static polarizabilities and molecular dispersion coefficients of the systems, as computed from time-dependent density functional theory (DFT). Dynamic as well as static polarizabilities are found to be highly anisotropic in these systems. In addition, the many-body dispersion method in DFT emerges as a particularly useful estimation of finite size effects for other expensive, many-body wavefunction based methods.

cond-mat.mtrl-sci↗

arXiv2016

Evidence for Stable Square Ice from Quantum Monte Carlo

Recent experiments on ice formed by water under nanoconfinement provide evidence for a two-dimensional (2D) `square ice' phase. However, the interpretation of the experiments has been questioned and the stability of square ice has become a matter of debate. Partially this is because the simulation approaches employed so far (force fields and density functional theory) struggle to accurately describe the very small energy differences between the relevant phases. Here we report a study of 2D ice using an accurate wave-function based electronic structure approach, namely Diffusion Monte Carlo (DMC). We find that at relatively high pressure square ice is indeed the lowest enthalpy phase examined, supporting the initial experimental claim. Moreover, at lower pressures a `pentagonal ice' phase (not yet observed experimentally) has the lowest enthalpy, and at ambient pressure the `pentagonal ice' phase is degenerate with a `hexagonal ice' phase. Our DMC results also allow us to evaluate the accuracy of various density functional theory exchange correlation functionals and force field models, and in doing so we extend the understanding of how such methodologies perform to challenging 2D structures presenting dangling hydrogen bonds.

physics.chem-ph↗

arXiv2016

Crystal Nucleation in Liquids: Open Questions and Future Challenges in Molecular Dynamics Simulations

The nucleation of crystals in liquids is one of nature's most ubiquitous phenomena, playing an important role in areas such as climate change and the production of drugs. As the early stages of nucleation involve exceedingly small time and length scales, atomistic computer simulations can provide unique insight into the microscopic aspects of crystallization. In this review, we take stock of the numerous molecular dynamics simulations that in the last few decades have unraveled crucial aspects of crystal nucleation in liquids. We put into context the theoretical framework of classical nucleation theory and the state of the art computational methods, by reviewing simulations of e.g. ice nucleation or crystallization of molecules in solutions. We shall see that molecular dynamics simulations have provided key insight into diverse nucleation scenarios, ranging from colloidal particles to natural gas hydrates, and that in doing so the general applicability of classical nucleation theory has been repeatedly called into question. We have attempted to identify the most pressing open questions in the field. We believe that by improving (i.) existing interatomic potentials; and (ii.) currently available enhanced sampling methods, the community can move towards accurate investigations of realistic systems of practical interest, thus bringing simulations a step closer to experiments.

cond-mat.mtrl-sci↗

arXiv2016

Toward Accurate Adsorption Energetics on Clay Surfaces

Clay minerals are ubiquitous in nature, and the manner in which they interact with their surroundings has important industrial and environmental implications. Consequently, a molecular-level understanding of the adsorption of molecules on clay surfaces is crucial. In this regard computer simulations play an important role, yet the accuracy of widely used empirical force fields (FF) and density functional theory (DFT) exchange-correlation functionals is often unclear in adsorption systems dominated by weak interactions. Herein we present results from quantum Monte Carlo (QMC) for water and methanol adsorption on the prototypical clay kaolinite. To the best of our knowledge, this is the first time QMC has been used to investigate adsorption at a complex, natural surface such as a clay. As well as being valuable in their own right, the QMC benchmarks obtained provide reference data against which the performance of cheaper DFT methods can be tested. Indeed using various DFT exchange-correlation functionals yields a very broad range of adsorption energies, and it is unclear a priori which evaluation is better. QMC reveals that in the systems considered here it is essential to account for van der Waals (vdW) dispersion forces since this alters both the absolute and relative adsorption energies of water and methanol. We show, via FF simulations, that incorrect relative energies can lead to significant changes in the interfacial densities of water and methanol solutions at the kaolinite interface. Despite the clear improvements offered by the vdW-corrected and the vdW-inclusive functionals, absolute adsorption energies are often overestimated, suggesting that the treatment of vdW forces in DFT is not yet a solved problem.

physics.chem-ph↗

arXiv2016

Ice Formation on Kaolinite: Insights from Molecular Dynamics Simulations

The formation of ice affects many aspects of our everyday life as well as technologies such as cryotherapy and cryopreservation. Foreign substances almost always aid water freezing through heterogeneous ice nucleation, but the molecular details of this process remain largely unknown. In fact, insight into the microscopic mechanism of ice formation on different substrates is difficult to obtain even via state-of-the-art experimental techniques. At the same time, atomistic simulations of heterogeneous ice nucleation frequently face extraordinary challenges due to the complexity of the water-substrate interaction and the long timescales that characterize nucleation events. Here, we have investigated several aspects of molecular dynamics simulations of heterogeneous ice nucleation considering as a prototypical ice nucleating material the clay mineral kaolinite, which is of relevance in atmospheric science. We show via seeded molecular dynamics simulations that ice nucleation on the hydroxylated (001) face of kaolinite proceeds exclusively via the formation of the hexagonal ice polytype. The critical nucleus size is two times smaller than that obtained for homogeneous nucleation at the same supercooling. Previous findings suggested that the flexibility of the kaolinite surface can alter the time scale for ice nucleation within molecular dynamics simulations. However, we here demonstrate that equally flexible (or non flexible) kaolinite surfaces can lead to very different outcomes in terms of ice formation, according to whether or not the surface relaxation of the clay is taken into account. We show that very small structural changes upon relaxation dramatically alter the ability of kaolinite to provide a template for the formation of a hexagonal overlayer of water molecules at the water-kaolinite interface, and that this relaxation therefore determines the nucleation ability of this mineral.

physics.chem-ph↗

arXiv2016

Boosting the accuracy and speed of quantum Monte Carlo: size-consistency and time-step

Diffusion Monte Carlo (DMC) simulations for fermions are becoming the standard to provide high quality reference data in systems that are too large to be investigated via quantum chemical approaches. DMC with the fixed-node approximation relies on modifications of the Green function to avoid singularities near the nodal surface of the trial wavefunction. We show that these modifications affect the DMC energies in a way that is not size-consistent, resulting in large time-step errors. Building on the modifications of Umrigar {\em et al.} and of DePasquale {\em et al.} we propose a simple Green function modification that restores size-consistency to large values of time-step; substantially reducing the time-step errors. The new algorithm also yields remarkable speedups of up to two orders of magnitude in the calculation of molecule-molecule binding energies and crystal cohesive energies, thus extending the horizons of what is possible with DMC.

physics.chem-ph↗

arXiv2015

Ab-initio molecular dynamics simulation of liquid water by Quantum Monte Carlo

Although liquid water is ubiquitous in chemical reactions at roots of life and climate on the earth, the prediction of its properties by high-level ab initio molecular dynamics simulations still represents a formidable task for quantum chemistry. In this article we present a room temperature simulation of liquid water based on the potential energy surface obtained by a many-body wave function through quantum Monte Carlo (QMC) methods. The simulated properties are in good agreement with recent neutron scattering and X-ray experiments, particularly concerning the position of the oxygen-oxygen peak in the radial distribution function, at variance of previous Density Functional Theory attempts. Given the excellent performances of QMC on large scale supercomputers, this work opens new perspectives for predictive and reliable ab-initio simulations of complex chemical systems.

physics.chem-ph↗

arXiv2014

The New Resonating Valence Bond Method for Ab-Initio Electronic Simulations

The Resonating Valence Bond theory of the chemical bond was introduced soon after the discovery of quantum mechanics and has contributed to explain the role of electron correlation within a particularly simple and intuitive approach where the chemical bond between two nearby atoms is described by one or more singlet electron pairs. In this chapter Pauling's resonating valence bond theory of the chemical bond is revisited within a new formulation, introduced by P.W. Anderson after the discovery of High-Tc superconductivity. It is shown that this intuitive picture of electron correlation becomes now practical and efficient, since it allows us to faithfully exploit the locality of the electron correlation, and to describe several new phases of matter, such as Mott insulators, High-Tc superconductors, and spin liquid phases.

physics.comp-ph↗

arXiv2014

Static and dynamical correlation in diradical molecules by Quantum Monte Carlo using the Jastrow Antisymmetrized Geminal Power ansatz

Diradical molecules are essential species involved in many organic and inorganic chemical reactions. The computational study of their electronic structure is often challenging, because a reliable description of the correlation, and in particular of the static one, requires multi-reference techniques. The Jastrow correlated Antisymmetrized Geminal Power (JAGP) is a compact and efficient wave function ansatz, based on the valence-bond representation, which can be used within Quantum Monte Carlo (QMC) approaches. The AGP part can be rewritten in terms of molecular orbitals, obtaining a multi-determinant expansion with zero-seniority number. In the present work we demonstrate the capability of the JAGP ansatz to correctly describe the electronic structure of two diradical prototypes: the orthogonally twisted ethylene, C2H4, and the methylene, CH2, representing respectively a homosymmetric and heterosymmetric system. On the other hand, we show that the simple ansatz of a Jastrow correlated Single Determinant (JSD) wave function is unable to provide an accurate description of the electronic structure in these diradical molecules, both at variational level and, more remarkably, in the fixed-nodes projection schemes showing that a poor description of the static correlation yields an inaccurate nodal surface. The suitability of JAGP to correctly describe diradicals with a computational cost comparable with that of a JSD calculation, in combination with a favorable scalability of QMC algorithms with the system size, opens new perspectives in the ab initio study of large diradical systems, like the transition states in cycloaddition reactions and the thermal isomerization of biological chromophores.

physics.chem-ph↗