arXiv subjects

Andreas Beling

Publications and source records attributed to Andreas Beling.

13 recordsLinked to original sources

arXiv2026

Heterogeneously Integrated Squeezed-Light Generation and Detection on a Single Photonic Chip

Squeezed light underpins quantum-enhanced sensing and continuous-variable quantum information processing, and integrated photonics offers a route to producing it at scale. Universal to these applications are squeezed-light generation and measurement. Importantly, quantum measurements serve not only as readout but also as active operations in quantum-state evolution. However, integrating squeezed-light generation and photodetection on the same photonic chip has remained challenging because they impose fundamentally conflicting material requirements: low optical loss to preserve quantum correlations, but efficient photon absorption for photodetection. Here, we demonstrate squeezed-light generation, routing, and balanced homodyne detection integrated on a single photonic chip through heterogeneous integration. A two-mode squeezed quantum microcomb comprising 34 quantum modes is measured with approximately 3 dB squeezing. Our work establishes a scalable architecture for fully integrated squeezed-light quantum photonic systems, unifying quantum-state generation, processing, and detection on a single chip.

quant-ph↗

arXiv2026

Heterogeneously Integrated Balanced Photodetector on an Ultra-Low Loss Silicon Nitride Delay Line Interferometer

Thin core silicon nitride photonics enables ultra-low loss, CMOS foundry compatible integration that supports wavelengths from the visible to shortwave infrared. Applications that can benefit from the resulting lower cost, improved robustness, and portability include quantum sensing and computing, ultra-low noise microwave generation, optical clocks, optical gyros, coherent fiber communications, and fiber sensing. An important next step is integration of functional circuits and systems on chip with heterogeneous integration of active components such as high-performance photodetection. Yet to date integrated high-performance photodetectors on the thin film silicon nitride platform has remained elusive. In this work, we demonstrate heterogeneous integration of an InGaAs on InP substrate Modified Uni-Traveling Carrier balanced photodetector with a 15-meter-long unbalanced thin core silicon nitride Mach-Zehnder Interferometer with a bandwidth of 0.92 GHz and a responsivity of 0.305 A/W at 1550 nm with a propagation loss as low as 2.5 dB/m at 1600 nm. Using this circuit we demonstrate two functions, a meter-scale differential interferometer laser stabilization circuit achieving a nearly 23 dB noise suppression at 1 kHz offset and an optical frequency discriminator frequency noise measurement with high sensitivity across 6 orders of magnitude from 10 Hz to 10 MHz. These results demonstrate that the high performance of thin core silicon nitride devices can be combined with integrated high-performance photodetection to realize on-chip stabilized lasers and circuits and pave the path towards full systems on chip.

physics.optics↗

arXiv2026

Low-loss phononic integrated circuits based on a silicon nitride-lithium niobate platform

Microwave-frequency acoustic waves in solids have emerged as a versatile platform for both classical and quantum applications. While phononic integrated devices and circuits are being developed on various material platforms, an ideal phononic integrated circuit (PnIC) platform should simultaneously support low-loss waveguide structures, high-quality-factor resonators, high-performance modulators, and efficient electromechanical transducers. Here, we establish a low-loss gigahertz-frequency PnIC platform based on patterned thin-film silicon nitride (SiN) on lithium niobate (LN) substrate. We develop low-loss PnIC building blocks including waveguides, directional couplers, and high-quality-factor (high-Q) ring resonators. As an application, we demonstrate a 1-GHz phononic oscillator based on a ring resonator, reaching a low phase noise of -159.0 dBc/Hz at a 100-kHz offset frequency. Our low-loss PnICs could meet the requirements in microwave acoustics, quantum phononics, and integrated hybrid systems combining phonons, photons, superconducting qubits, and solid-state defects.

physics.app-ph↗

arXiv2025

Universal loss and gain characterization inside photonic integrated circuits

Integrated photonics has undergone tremendous development in the past few decades, transforming many fields of study in science and technology. Loss and gain are two fundamental elements in photonic circuits and have direct impacts on nearly all key performance metrics. Surprisingly, the tools to characterize the optical loss and gain inside photonic integrated circuits (PICs) are very limited. This is because, unlike free-space or fiber optics, integrated circuits cannot be nondestructively disassembled. Here, we report a universal method to see inside the photonic integrated circuits and measure loss and gain on the component level nondestructively. The method leverages nonlinear optical devices as optical power discriminators to retrieve the loss and gain information inside the PICs. Our method has a precision better than 0.1 dB, and can characterize the loss of individual fiber-chip coupling facet and general unknown devices under test. As a demonstration of applications, we measured the true on-chip quantum efficiency of a quantum PIC consisting of heterogeneously integrated balanced photodiodes, a critical building block for integrated quantum technology. Our method can be implemented on different photonic platforms, and can be used to understand gain and loss in complex photonic circuits, which is essential to optimize circuit design and to create large-scale systems with predictable, reproducible performance.

physics.optics↗

arXiv2025

Photonic chip-based optical frequency division with PZT-integrated soliton microcombs

Optical frequency division (OFD) produces low-noise microwave and millimeter-wave signals by transferring the exceptional stability of optical references to electronic frequency domains. Recent developments in integrated optical references and soliton microcombs have paved the way for miniaturizing OFD oscillators to chip scale. Critical to this realization is a rapid tunable frequency comb that is stabilized to the optical references, thereby coherently linking optical and electronic frequencies. In this work, we advance the on-chip OFD technology using an integrated high-speed PZT stress-optic actuator on the SiN soliton microcomb resonator. The integrated PZT actuator tunes the resonance frequency of the soliton-generating microresonator with a bandwidth exceeding 10s MHz and independently adjusts the soliton repetition rate without perturbing the frequency comb offset. Optical frequency division and low-noise mmWave generation are demonstrated by feedback control of the soliton repetition rate through the integrated PZT-actuator, and the soliton microcomb is stabilized to a pair of reference lasers that are locked to an integrated 4-meter SiN coil reference cavity. Our approach provides a fast, versatile and integrated control mechanism for OFD oscillators and their applications in advanced communications, sensing, and precise timing.

physics.optics↗

arXiv2025

Universal electronic synthesis by microresonator-soliton photomixing

Access to electrical signals across the millimeter-wave (mmW) and terahertz (THz) bands offers breakthroughs for high-performance applications. Despite generations of revolutionary development, integrated electronics are challenging to operate beyond 100 GHz. Therefore, new technologies that generate wideband and tunable electronic signals would advance wireless communication, high-resolution imaging and scanning, spectroscopy, and network formation. Photonic approaches have been demonstrated for electronic signal generation, but at the cost of increased size and power consumption. Here, we describe a chip-scale, universal mmW frequency synthesizer, which uses integrated nonlinear photonics and high-speed photodetection to exploit the nearly limitless bandwidth of light. We use a photonic-integrated circuit to generate dual, microresonator-soliton frequency combs whose interferogram is fundamentally composed of harmonic signals spanning the mmW and THz bands. By phase coherence of the dual comb, we precisely stabilize and synthesize the interferogram to generate any output frequency from DC to >1000 GHz. Across this entire range, the synthesizer exhibits exceptional absolute fractional frequency accuracy and precision, characterized by an Allan deviation of 3*10^(-12) in 1 s measurements. We use a modified uni-traveling-carrier (MUTC) photodiode with an operating frequency range to 500 GHz to convert the interferogram to an electrical signal, generating continuously tunable tones across the entire mmW band. The synthesizer phase noise at a reference frequency of 150 GHz is -83 dBc/Hz at 100 kHz offset, which exceeds the intrinsic performance of state-of-the-art CMOS electronics. Our work harnesses the coherence, bandwidth, and integration of photonics to universally extend the frequency range of current, advanced-node CMOS microwave electronics to the mmW and THz bands.

physics.optics↗

arXiv2024

Integrated lithium niobate photonic computing circuit based on efficient and high-speed electro-optic conversion

Here we show a photonic computing accelerator utilizing a system-level thin-film lithium niobate circuit which overcomes this limitation. Leveraging the strong electro-optic (Pockels) effect and the scalability of this platform, we demonstrate photonic computation at speeds up to 1.36 TOPS while consuming 0.057 pJ/OP. Our system features more than 100 thin-film lithium niobate high-performance components working synergistically, surpassing state-of-the-art systems on this platform. We further demonstrate binary-classification, handwritten-digit classification, and image classification with remarkable accuracy, showcasing our system's capability of executing real algorithms. Finally, we investigate the opportunities offered by combining our system with a hybrid-integrated distributed feedback laser source and a heterogeneous-integrated modified uni-traveling carrier photodiode. Our results illustrate the promise of thin-film lithium niobate as a computational platform, addressing current bottlenecks in both electronic and photonic computation. Its unique properties of high-performance electro-optic weight encoding and conversion, wafer-scale scalability, and compatibility with integrated lasers and detectors, position thin-film lithium niobate photonics as a valuable complement to silicon photonics, with extensions to applications in ultrafast and power-efficient signal processing and ranging.

physics.optics↗

arXiv2024

Broadband Optoelectronic Mixer for Terahertz Frequency-Comb Measurements

We demonstrate ultra-broadband optoelectronic mixing of frequency combs that provides phase-coherent detection of a repetition frequency up to 500 GHz, using a high-speed modified uni-traveling carrier (MUTC) photodiode. Nonlinear photo-electron effects in the photodiode itself enable harmonic generation and down-mixing process of combs with widely different repetition frequency. Specifically, we generate two, 25 GHz frequency combs and use an optical filter to explore coherent down-mixing to baseband of comb spectral components across microwave, millimeter wave, and terahertz (THz) frequencies. The exceptional noise performance of the optoelectronic mixer enables the phase-coherent measurement of millimeter-wave and THz frequency combs with an Allan deviation of 10^-13/t for a measurement time of t. We further investigate the dependence of conversion loss on the reverse bias voltage and photocurrent. The experimental results indicate that we can minimize the conversion loss by operating the photodiode at an optimal voltage and maximum available photocurrent. Our work provides a solution for millimeter-wave and THz frequency comb measurements and facilitates fully stabilized frequency combs with microresonators.

physics.optics↗

arXiv2024

Kerr optical frequency division with integrated photonics for stable microwave and mmWave generation

Optical frequency division (OFD) has revolutionized microwave and mmWave generation and set spectral purity records owing to its unique capability to transfer high fractional stability from optical to electronic frequencies. Recently, rapid developments in integrated optical reference cavities and microresonator-based optical frequency combs (microcombs) have created a path to transform OFD technology to chip scale. Here, we demonstrate an ultra-low phase noise mmWave oscillator by leveraging integrated photonic components and Kerr optical frequency division. The oscillator derives its stability from an integrated CMOS-compatible SiN coil cavity, and the optical frequency division is achieved spontaneously through Kerr interaction between the injected reference lasers and soliton microcombs in the integrated SiN microresonator. Besides achieving record-low phase noise for integrated mmWave oscillators, our demonstration greatly simplifies the implementation of integrated OFD oscillators and could be useful in applications of Radar, spectroscopy, and astronomy.

physics.optics↗

arXiv2023

Integrated optical frequency division for stable microwave and mmWave generation

The generation of ultra-low noise microwave and mmWave in miniaturized, chip-based platforms can transform communication, radar, and sensing systems. Optical frequency division that leverages optical references and optical frequency combs has emerged as a powerful technique to generate microwaves with superior spectral purity than any other approaches. We demonstrate a miniaturized optical frequency division system that can potentially transfer the approach to a CMOS-compatible integrated photonic platform. Phase stability is provided by a large-mode-volume, planar-waveguide-based optical reference coil cavity and is divided down from optical to mmWave frequency by using soliton microcombs generated in a waveguide-coupled microresonator. Besides achieving record-low phase noise for integrated photonic microwave/mmWave oscillators, these devices can be heterogeneously integrated with semiconductor lasers, amplifiers, and photodiodes, holding the potential of large-volume, low-cost manufacturing for fundamental and mass-market applications.

physics.optics↗

arXiv2020

Towards high-power, high-coherence, integrated photonic mmWave platform with microcavity solitons

Millimeter-wave (mmWave) technology continues to draw large interest due to its broad applications in wireless communications, radar, and spectroscopy. Compared to pure electronic solutions, photonic-based mmWave generation provides wide bandwidth, low power dissipation, and remoting through low-loss fiber. However, at high frequencies, two major challenges exist for the photonic system: the power roll-off of the photodiode, and the large signal linewidth derived directly from the lasers. Here, we demonstrate a new photonic mmWave platform by combining integrated microresonator solitons and high-speed photodiodes to address the challenges in both power and coherence. The solitons, being inherently mode-locked, are measured to provide 5.8 dB additional gain through constructive interference among mmWave beatnotes, and the absolute mmWave power approaches the theoretical limit of conventional heterodyne detection at 100 GHz. In our free-running system, the soliton is capable of reducing the mmWave linewidth by two orders of magnitude from that of the pump laser. Our work leverages microresonator solitons and high-speed modified uni-traveling carrier photodiodes to provide a viable path to chip-scale high-power, low-noise, high-frequency sources for mmWave applications.

physics.app-ph↗

arXiv2020

Photon-number-resolving segmented detectors based on single-photon avalanche-photodiodes

We investigate the feasibility and performance of photon-number-resolved photodetection employing single-photon avalanche photodiodes (SPADs) with low dark counts. While the main idea, to split $n$ photons into $m$ detection modes with no more than one photon per mode, is not new, we investigate here a important variant of this situation where SPADs are side-coupled to the same waveguide rather than terminally coupled to a propagation tree. This prevents the nonideal SPAD quantum efficiency from contributing to photon loss. We propose a concrete SPAD segmented waveguide detector based on vertical directional coupler design, and characterize its performance by evaluating the purities of positive-operator-valued measurements (POVMs) in terms of SPAD number $m$, photon loss, and dark counts.

physics.ins-det↗

arXiv2015

Attosecond Timing in Optical-to-Electrical Conversion

The most frequency-stable sources of electromagnetic radiation are produced optically, and optical frequency combs provide the means for high fidelity frequency transfer across hundreds of terahertz and into the microwave domain. A critical step in this photonic-based synthesis of microwave signals is the optical-to-electrical conversion process. Here we show that attosecond (as) timing stability can be preserved across the opto-electronic interface of a photodiode, despite an intrinsic temporal response that is more than six orders of magnitude slower. The excess timing noise in the photodetection of a periodic train of ultrashort optical pulses behaves as flicker noise (1/f) with amplitude of 4 as/Sqrt(Hz) at 1 Hz offset. The corresponding fractional frequency fluctuations are 1.4x10-17 at 1 second and 5.5x10-20 at 1000 seconds. These results demonstrate that direct photodetection, as part of frequency-comb-based microwave synthesis, can support the timing performance of the best optical frequency standards, and thereby opens the possibility for generating microwave signals with significantly better stability than any existing source.

physics.optics↗