arXiv subjects

Andreas Freise

Publications and source records attributed to Andreas Freise.

43 records · Page 3Linked to original sources

arXiv2011

Experimental demonstration of higher-order Laguerre-Gauss mode interferometry

The compatibility of higher-order Laguerre-Gauss (LG) modes with interferometric technologies commonly used in gravitational wave detectors is investigated. In this paper we present the first experimental results concerning the performance of the LG33 mode in optical resonators. We show that the Pound-Drever-Hall error signal for a LG33 mode in a linear optical resonator is identical to that of the more commonly used LG00 mode, and demonstrate the feedback control of the resonator with a LG33 mode. We succeeded to increase the mode purity of a LG33 mode generated using a spatial-light modulator from 51% to 99% upon transmission through a linear optical resonator. We further report the experimental verification that a triangular optical resonator does not transmit helical LG modes.

astro-ph.IM↗

arXiv2011

Higher order Laguerre-Gauss mode degeneracy in realistic, high finesse cavities

Higher order Laguerre-Gauss (LG) beams have been proposed for use in future gravitational wave detectors, such as upgrades to the Advanced LIGO detectors and the Einstein Telescope, for their potential to reduce the effects of the thermal noise of the test masses. This paper details the theoretical analysis and simulation work carried out to investigate the behaviour of LG beams in realistic optical setups, in particular the coupling between different LG modes in a linear cavity. We present a new analytical approximation to compute the coupling between modes, using Zernike polynomials to describe mirror surface distortions. We apply this method in a study of the behaviour of the LG33 mode within realistic arm cavities, using measured mirror surface maps from the Advanced LIGO project. We show mode distortions that can be expected to arise due to the degeneracy of higher order spatial modes within such cavities and relate this to the theoretical analysis. Finally we identify the mirror distortions which cause significant coupling from the LG33 mode into other order 9 modes and derive requirements for the mirror surfaces.

gr-qc↗

arXiv2010

The upgrade of GEO600

The German / British gravitational wave detector GEO 600 is in the process of being upgraded. The upgrading process of GEO 600, called GEO-HF, will concentrate on the improvement of the sensitivity for high frequency signals and the demonstration of advanced technologies. In the years 2009 to 2011 the detector will undergo a series of upgrade steps, which are described in this paper.

gr-qc↗

arXiv2010

Experimental demonstration of a Displacement noise Free Interferometry scheme for gravitational wave detectors showing displacement noise reduction at low frequencies

This paper reports an experimental demonstration of partial displacement noise free laser interferometry in the gravitational wave detection band. The used detuned Fabry-Perot cavity allows the isolation of the mimicked gravitational wave signal from the displacement noise on the cavities input mirror. By properly combining the reflected and transmitted signals from the cavity a reduction of the displacement noise was achieved. Our results represent the first experimental demonstration of this recently proposed displacement noise free laser interferometry scheme. Overall we show that the rejection ratio of the displacement noise to the gravitational wave signal was improved in the frequency range of 10 Hz to 10 kHz with a typical factor of 60.

gr-qc↗

arXiv2009

A Xylophone Configuration for a third Generation Gravitational Wave Detector

Achieving the demanding sensitivity and bandwidth, envisaged for third generation gravitational wave (GW) observatories, is extremely challenging with a single broadband interferometer. Very high optical powers (Megawatts) are required to reduce the quantum noise contribution at high frequencies, while the interferometer mirrors have to be cooled to cryogenic temperatures in order to reduce thermal noise sources at low frequencies. To resolve this potential conflict of cryogenic test masses with high thermal load, we present a conceptual design for a 2-band xylophone configuration for a third generation GW observatory, composed of a high-power, high-frequency interferometer and a cryogenic low-power, low-frequency instrument. Featuring inspiral ranges of 3200Mpc and 38000Mpc for binary neutron stars and binary black holes coalesences, respectively, we find that the potential sensitivity of xylophone configurations can be significantly wider and better than what is possible in a single broadband interferometer.

gr-qc↗

arXiv2009

Prospects of higher-order Laguerre Gauss modes in future gravitational wave detectors

The application of higher-order Laguerre Gauss (LG) modes in large-scale gravitational wave detectors has recently been proposed. In comparison to the fundamental mode, some higher-order Laguerre Gauss modes can significantly reduce the contribution of coating Brownian noise. Using frequency domain simulations we give a detailed analysis of the longitudinal and angular control signals derived with a LG33 mode in comparison to the fundamental TEM00 mode. The performance regarding interferometric sensing and control of the LG33 mode is found to be similar, if not even better in all aspects of interest. In addition, we evaluate the sensitivity gain of the implementation of LG33 modes into the Advanced Virgo instrument. Our analysis shows that the application of the LG33 mode results in a broadband improvement of the Advanced Virgo sensitivity, increasing the potential detection rate of binary neutron star inspirals by a factor 2.1.

gr-qc↗

arXiv2008

Pushing towards the ET sensitivity using 'conventional' technology

Recently, the design study `Einstein gravitational wave Telescope' (ET) has been funded within the European FP7 framework. The ambitious goal of this project is to provide a conceptual design of a detector with a hundred times better sensitivity than currently operating instruments. It is expected that this will require the development and implementation of new technologies, which go beyond the concepts employed for the first and second detector generations. However, it is a very interesting and educational exercise to imagine a Michelson interferometer in which conventional technologies have been pushed to - or maybe beyond - their limits to reach the envisaged sensitivity for the Einstein Telescope. In this document we present a first sketchy analysis of what modifications and improvements are necessary to go, step-by-step, from second generation gravitational wave detectors to the Einstein Telescope.

gr-qc↗