arXiv subjects

Andreas Nüchter

Publications and source records attributed to Andreas Nüchter.

15 recordsLinked to original sources

arXiv2026

ROS2 Connect: A new ROS2 over WAN Solution

The Robot Operating System 2 (ROS2) has become a widely adopted framework for the development of distributed robotic systems. However, its communication architecture, based on DDS and RTPS, relies on multicast discovery mechanisms that are typically unavailable in wide-area network (WAN) environments, making remote operation challenging. This work presents ROS2 Connect, a WebSocket-based communication framework that enables transparent and secure ROS2 interaction across routed networks without requiring modifications to network infrastructure or DDS configurations. The proposed client-server architecture supports bidirectional exchange of topics, services, actions, and system data while integrating authentication and access control mechanisms. Experimental evaluation over a real WAN connection demonstrates significantly lower latency, higher stability, and improved scalability compared to existing solutions, including DDS Router, rosbridge and Zenoh. Initial results show that ROS2 Connect provides a reliable foundation for teleoperation and distributed robotics applications over wide-area networks.

cs.RO↗

arXiv2026

Mining beyond Earth with Space Robots: Exploration, Sampling, and Extraction

Space resource acquisition and utilization, commonly referred to as Space Mining, represent critical pathways for enabling sustained human exploration and unlocking commercial opportunities in space. These resources mainly include helium-3, water, mineral resources on the Moon and Mars, and abundant mineral deposits on asteroids. Due to the harsh conditions of space, communication delays, and high launch costs, the development of autonomous robotic systems is critical to achieving efficient, cost-effective space mining. This paper provides a comprehensive overview of space mining robotics and associated technologies. First, we review the background of space mining, including international policies, commercial entities, and recent advancements. We define a systematic six-stage architecture for space mining: Exploration is initiated by (1) remote sensing for target identification and (2) precise in situ robotic detection; Sampling progresses from (3) single-robot small-scale sampling to (4) multi-robot large-scale excavation; and Extraction integrates (5) autonomous resource extraction and (6) final integration into in situ construction or terrestrial transport. Additionally, we review and curate existing resources for space mining research, including real-world mission data, terrestrial analog datasets, and high-fidelity simulation environments. Finally, we identify critical open challenges in autonomous space mining and delineate a strategic research roadmap to bridge current technological gaps, fostering the transition toward a sustainable off-world economy. To track ongoing developments in space mining, we maintain an updated project page: https://github.com/OpenSpace-Lab/Space-Mining-with-Robotics-List.

cs.RO↗

arXiv2026

Motion-Acceleration Calibration and Compensation in IMUs without External Equipment for Attitude Estimation Filters

Attitude estimation based on inertial sensing requires measurements of local angular velocities and local gravity via gyroscopes and accelerometers. However, during the motion of a mobile system the inertial measurement unit (IMU) will be subject to additional accelerations which skews the measurement of local gravity. This effect gets amplified the further away the IMU is from the base of the system. Many attitude estimation filters, such as "Madgwick" or "Mahony", account for this by relying more on gyroscope integration for periods of high angular velocity. However, this approach is prone to accumulate long term error especially around the gravity vector. In this work we utilize the gyroscope measurements to compensate the additional accelerations induced by the motion of the system, i.e., centripetal- and tangential-accelerations. Additionally, we introduce a calibration method that estimates intrinsic IMU parameters such as axes misalignment, bias, scale, as well as the extrinsic base-to-IMU vector without the necessity for additional external equipment. Our evaluation in simulation as well as in the real-world shows that this method improves any attitude filter that relies on the direction of gravity. Furthermore we demonstrate the effectivenes on highly dynamic systems, and systems that are unable to put the IMU at the center of rotation, using our real-world spherical mobile mapping system.

cs.RO↗

arXiv2026

A UAV-Mounted Sensor Network for Close-Range Inspection of Wind Turbine Rotor Blades

Inspection of offshore wind turbine rotor blades is critical for predictive maintenance to maximise efficiency and extend operational lifetime. However, it remains a challenging task due to remote locations, large structural dimensions, and the limitations of current UAV-compatible sensor systems. While existing approaches can detect certain types of surface anomalies, reliable classification of defect types often remains a manual and error-prone process. This paper presents the design of a UAV-mounted multimodal sensor network combining an industrial RGB camera, a passive thermal infrared camera, and an in-house developed 3D scanner. All sensors are co-calibrated into a common coordinate frame, enabling spatial superimposition of geometric, colour, and thermal data. The system is designed to operate at close range, addressing three fundamental sensing challenges: platform motion, large field of view, and millimetre-level measurement accuracy. Preliminary laboratory results demonstrate synchronised multi-sensor acquisition and initial point cloud reconstructions, forming the basis for future airborne inspection trials.

cs.RO↗

arXiv2026

Towards 3D karst underwater scene reconstruction from rotating sonar data

Karst aquifers provide critical freshwater resources but pose significant hazards due to their complex and poorly understood subsurface geometry. Mapping these environments is challenging because sonar data from underwater exploration is sparse and noisy, while navigation estimates suffer from drift limiting standard 3D reconstruction methods. We present a pipeline for reconstructing underwater karst conduits from a sonar profiler. We combine a continuous-time SLAM approach to correct trajectory drift with a novel two-stage deep learning method for surface reconstruction, producing an immersive and navigable 3D mesh for hydrogeological analysis.

cs.RO↗

arXiv2026

Edge Radar Material Classification Under Geometry Shifts

Material awareness can improve robotic navigation and interaction, particularly in conditions where cameras and LiDAR degrade. We present a lightweight mmWave radar material classification pipeline designed for ultra-low-power edge devices (TI IWRL6432), using compact range-bin intensity descriptors and a Multilayer Perceptron (MLP) for real-time inference. While the classifier reaches a macro-F1 of 94.2\% under the nominal training geometry, we observe a pronounced performance drop under realistic geometry shifts, including sensor height changes and small tilt angles. These perturbations induce systematic intensity scaling and angle-dependent radar cross section (RCS) effects, pushing features out of distribution and reducing macro-F1 to around 68.5\%. We analyze these failure modes and outline practical directions for improving robustness with normalization, geometry augmentation, and motion-aware features.

cs.RO↗

arXiv2026

Dynamic-ICP: Doppler-Aware Iterative Closest Point Registration for Dynamic Scenes

Reliable odometry in highly dynamic environments remains challenging when it relies on ICP-based registration: ICP assumes near-static scenes and degrades in repetitive or low-texture geometry. We introduce Dynamic-ICP, a Doppler-aware registration framework. The method (i) estimates ego motion from per-point Doppler velocity via robust regression and builds a velocity filter, (ii) clusters dynamic objects and reconstructs object-wise translational velocities from ego-compensated radial measurements, (iii) predicts dynamic points with a constant-velocity model, and (iv) aligns scans using a compact objective that combines point-to-plane geometry residual with a translation-invariant, rotation-only Doppler residual. The approach requires no external sensors or sensor-vehicle calibration and operates directly on FMCW LiDAR range and Doppler velocities. We evaluate Dynamic-ICP on three datasets-HeRCULES, HeLiPR, AevaScenes-focusing on highly dynamic scenes. Dynamic-ICP consistently improves rotational stability and translation accuracy over the state-of-the-art methods. Our approach is also simple to integrate into existing pipelines, runs in real time, and provides a lightweight solution for robust registration in dynamic environments. To encourage further research, the code is available at: https://github.com/JMUWRobotics/Dynamic-ICP.

cs.RO↗

arXiv2026

Doppler-SLAM: Doppler-Aided Radar-Inertial and LiDAR-Inertial Simultaneous Localization and Mapping

Simultaneous localization and mapping (SLAM) is a critical capability for autonomous systems. Traditional SLAM approaches, which often rely on visual or LiDAR sensors, face significant challenges in adverse conditions such as low light or featureless environments. To overcome these limitations, we propose a novel Doppler-aided radar-inertial and LiDAR-inertial SLAM framework that leverages the complementary strengths of 4D radar, FMCW LiDAR, and inertial measurement units. Our system integrates Doppler velocity measurements and spatial data into a tightly-coupled front-end and graph optimization back-end to provide enhanced ego velocity estimation, accurate odometry, and robust mapping. We also introduce a Doppler-based scan-matching technique to improve front-end odometry in dynamic environments. In addition, our framework incorporates an innovative online extrinsic calibration mechanism, utilizing Doppler velocity and loop closure to dynamically maintain sensor alignment. Extensive evaluations on both public and proprietary datasets show that our system significantly outperforms state-of-the-art radar-SLAM and LiDAR-SLAM frameworks in terms of accuracy and robustness. To encourage further research, the code of our Doppler-SLAM and our dataset are available at: https://github.com/Wayne-DWA/Doppler-SLAM.

cs.RO↗

arXiv2025

Design and Evaluation of Two Spherical Systems for Mobile 3D Mapping

Spherical robots offer unique advantages for mapping applications in hazardous or confined environments, thanks to their protective shells and omnidirectional mobility. This work presents two complementary spherical mapping systems: a lightweight, non-actuated design and an actuated variant featuring internal pendulum-driven locomotion. Both systems are equipped with a Livox Mid-360 solid-state LiDAR sensor and run LiDAR-Inertial Odometry (LIO) algorithms on resource-constrained hardware. We assess the mapping accuracy of these systems by comparing the resulting 3D point-clouds from the LIO algorithms to a ground truth map. The results indicate that the performance of state-of-the-art LIO algorithms deteriorates due to the high dynamic movement introduced by the spherical locomotion, leading to globally inconsistent maps and sometimes unrecoverable drift.

cs.RO↗

arXiv2025

SceneFactory: A Workflow-centric and Unified Framework for Incremental Scene Modeling

We present SceneFactory, a workflow-centric and unified framework for incremental scene modeling, that conveniently supports a wide range of applications, such as (unposed and/or uncalibrated) multi-view depth estimation, LiDAR completion, (dense) RGB-D/RGB-L/Mono/Depth-only reconstruction and SLAM. The workflow-centric design uses multiple blocks as the basis for constructing different production lines. The supported applications, i.e., productions avoid redundancy in their designs. Thus, the focus is placed on each block itself for independent expansion. To support all input combinations, our implementation consists of four building blocks that form SceneFactory: (1) tracking, (2) flexion, (3) depth estimation, and (4) scene reconstruction. The tracking block is based on Mono SLAM and is extended to support RGB-D and RGB-LiDAR (RGB-L) inputs. Flexion is used to convert the depth image (untrackable) into a trackable image. For general-purpose depth estimation, we propose an unposed \& uncalibrated multi-view depth estimation model (U$^2$-MVD) to estimate dense geometry. U$^2$-MVD exploits dense bundle adjustment to solve for poses, intrinsics, and inverse depth. A semantic-aware ScaleCov step is then introduced to complete the multi-view depth. Relying on U$^2$-MVD, SceneFactory both supports user-friendly 3D creation (with just images) and bridges the applications of Dense RGB-D and Dense Mono. For high-quality surface and color reconstruction, we propose Dual-purpose Multi-resolutional Neural Points (DM-NPs) for the first surface accessible Surface Color Field design, where we introduce Improved Point Rasterization (IPR) for point cloud based surface query. ...

cs.CV↗

arXiv2025

UWB Anchor Based Localization of a Planetary Rover

Localization of an autonomous mobile robot during planetary exploration is challenging due to the unknown terrain, the difficult lighting conditions and the lack of any global reference such as satellite navigation systems. We present a novel approach for robot localization based on ultra-wideband (UWB) technology. The robot sets up its own reference coordinate system by distributing UWB anchor nodes in the environment via a rocket-propelled launcher system. This allows the creation of a localization space in which UWB measurements are employed to supplement traditional SLAM-based techniques. The system was developed for our involvement in the ESA-ESRIC challenge 2021 and the AMADEE-24, an analog Mars simulation in Armenia by the Austrian Space Forum (ÖWF).

cs.RO↗

arXiv2022

Trajectory Optimization and Following for a Three Degrees of Freedom Overactuated Floating Platform

Space robotics applications, such as Active Space Debris Removal (ASDR), require representative testing before launch. A commonly used approach to emulate the microgravity environment in space is air-bearing based platforms on flat-floors, such as the European Space Agency's Orbital Robotics and GNC Lab (ORGL). This work proposes a control architecture for a floating platform at the ORGL, equipped with eight solenoid-valve-based thrusters and one reaction wheel. The control architecture consists of two main components: a trajectory planner that finds optimal trajectories connecting two states and a trajectory follower that follows any physically feasible trajectory. The controller is first evaluated within an introduced simulation, achieving a 100 % success rate at finding and following trajectories to the origin within a Monte-Carlo test. Individual trajectories are also successfully followed by the physical system. In this work, we showcase the ability of the controller to reject disturbances and follow a straight-line trajectory within tens of centimeters.

cs.RO↗

arXiv2022

Finding and Following Optimal Trajectories for an Overactuated Floating Robotic Platform

The recent increase in yearly spacecraft launches and the high number of planned launches have raised questions about maintaining accessibility to space for all interested parties. A key to sustaining the future of space-flight is the ability to service malfunctioning - and actively remove dysfunctional spacecraft from orbit. Robotic platforms that autonomously perform these tasks are a topic of ongoing research and thus must undergo thorough testing before launch. For representative system-level testing, the European Space Agency (ESA) uses, among other things, the Orbital Robotics and GNC Lab (ORGL), a flat-floor facility where air-bearing based platforms exhibit free-floating behavior in three Degrees of Freedom (DoF). This work introduces a representative simulation of a free-floating platform in the testing environment and a software framework for controller development. Finally, this work proposes a controller within that framework for finding and following optimal trajectories between arbitrary states, which is evaluated in simulation and reality.

cs.RO↗

arXiv2020

Non-iterative One-step Solution for Point Set Registration Problem on Pose Estimation without Correspondence

In this work, we propose to directly find the one-step solution for the point set registration problem without correspondences. Inspired by the Kernel Correlation method, we consider the fully connected objective function between two point sets, thus avoiding the computation of correspondences. By utilizing least square minimization, the transformed objective function is directly solved with existing well-known closed-form solutions, e.g., singular value decomposition, that is usually used for given correspondences. However, using equal weights of costs for each connection will degenerate the solution due to the large influence of distant pairs. Thus, we additionally set a scale on each term to avoid high costs on non-important pairs. As in feature-based registration methods, the similarity between descriptors of points determines the scaling weight. Given the weights, we get a one step solution. As the runtime is in $\mathcal O (n^2)$, we also propose a variant with keypoints that strongly reduces the cost. The experiments show that the proposed method gives a one-step solution without an initial guess. Our method exhibits competitive outlier robustness and accuracy, compared to various other methods, and it is more stable in case of large rotations. Additionally, our one-step solution achieves a performance on-par with the state-of-the-art feature based method TEASER.

cs.RO↗

arXiv2020

Self-supervised Point Set Local Descriptors for Point Cloud Registration

In this work, we propose to learn local descriptors for point clouds in a self-supervised manner. In each iteration of the training, the input of the network is merely one unlabeled point cloud. On top of our previous work, that directly solves the transformation between two point sets in one step without correspondences, the proposed method is able to train from one point cloud, by supervising its self-rotation, that we randomly generate. The whole training requires no manual annotation. In several experiments we evaluate the performance of our method on various datasets and compare to other state of the art algorithms. The results show, that our self-supervised learned descriptor achieves equivalent or even better performance than the supervised learned model, while being easier to train and not requiring labeled data.

cs.RO↗