arXiv subjects

Andreas Nold

Publications and source records attributed to Andreas Nold.

12 recordsLinked to original sources

arXiv2024

Hydrodynamic density-functional theory for the moving contact-line problem reveals fluid structure and emergence of a spatially distinct pattern

Understanding the nanoscale effects controlling the dynamics of a contact line -- defined as the line formed at the junction of two fluid phases and a solid -- has been a longstanding problem in fluid mechanics pushing experimental and numerical methods to their limits. A major challenge is the multiscale nature of the problem, whereby nanoscale phenomena manifest themselves at the macroscale. To probe the nanoscale, not easily accessible to other methods, we propose a reductionist model that employs elements from statistical mechanics, namely dynamic-density-functional theory (DDFT), in a Navier-Stokes-like equation -- an approach we name hydrodynamic DDFT. The model is applied to an isothermal Lennard-Jones-fluid with no slip on a flat solid substrate. Our computations reveal fluid stratification with an oscillatory density structure close to the wall and the emergence of two distinct regions as the temperature increases: a region of compression on the vapor side of the liquid-vapour interface and an effective slip region of large shear on the liquid side. The compressive region spreads along the fluid interface at a lengthscale that increases faster than the width of the fluid interface with temperature, while the width of the slip region is bound by the oscillatory fluid density structure and is constrained to a few particle diameters from the wall. Both compressive and shear effects may offset contact line friction, while compression in particular has a disproportionately high effect on the speed of advancing contact lines at low temperatures.

physics.flu-dyn↗

arXiv2018

The pressure tensor across a liquid-vapour interface

Inhomogeneous fluids exhibit physical properties that are neither uniform nor isotropic. The pressure tensor is a case in point, key to the mechanical description of the interfacial region. Kirkwood and Buff, and later Irving and Kirkwood, obtained a formal treatment based on the analysis of the pressure across a planar surface [J.G. Kirkwood and F.P. Buff, J. Chem. Phys., 17(3), (1949), J.H. Irving and J.G. Kirkwood, J. Chem. Phys. 18, 817 (1950)]. We propose a generalisation of Irving and Kirkwood's argument to fluctuating, non-planar surfaces and obtain an expression for the pressure tensor that is not smeared by thermal fluctuations at the molecular scale and corresponding capillary waves [F.P. Buff, R.A. Lovett, and F.H. Stillinger, Jr., Phys. Rev. Lett. 15, 621 (1965)]. We observe the emergence of surface tension, defined as an excess tangential stress, acting exactly across the dividing surface at the sharpest molecular resolution. The new statistical mechanical expressions extend current treatments to fluctuating inhomogeneous systems far from equilibrium.

cond-mat.stat-mech↗

arXiv2017

Nanoscale fluid structure of liquid-solid-vapour contact lines for a wide range of contact angles

We study the nanoscale behaviour of the density of a simple fluid in the vicinity of an equilibrium contact line for a wide range of Young contact angles between 40 and 135 degrees. Cuts of the density profile at various positions along the contact line are presented, unravelling the apparent step-wise increase of the film height profile observed in contour plots of the density. The density profile is employed to compute the normal pressure acting on the substrate along the contact line. We observe that for the full range of contact angles, the maximal normal pressure cannot solely be predicted by the curvature of the adsorption film height, but is instead softened -- likely by the width of the liquid-vapour interface. Somewhat surprisingly however, the adsorption film height profile can be predicted to a very good accuracy by the Derjaguin-Frumkin disjoining pressure obtained from planar computations, as was first shown in [Nold et al., Phys. Fluids, 26, 072001, 2014] for contact angles less than 90 degrees, a result which here we show to be valid for the full range of contact angles. This suggests that while two-dimensional effects cannot be neglected for the computation of the normal pressure distribution along the substrate, one-dimensional planar computations of the Derjaguin-Frumkin disjoining pressure are sufficient to accurately predict the adsorption height profile.

physics.flu-dyn↗

arXiv2017

Pseudospectral methods for density functional theory in bounded and unbounded domains

Classical Density Functional Theory (DFT) is a statistical-mechanical framework to analyze fluids, which accounts for nanoscale fluid inhomogeneities and non-local intermolecular interactions. DFT can be applied to a wide range of interfacial phenomena, as well as problems in adsorption, colloidal science and phase transitions in fluids. Typical DFT equations are highly non-linear, stiff and contain several convolution terms. We propose a novel, efficient pseudo-spectral collocation scheme for computing the non-local terms in real space with the help of a specialized Gauss quadrature. Due to the exponential accuracy of the quadrature and a convenient choice of collocation points near interfaces, we can use grids with a significantly lower number of nodes than most other reported methods. We demonstrate the capabilities of our numerical methodology by studying equilibrium and dynamic two-dimensional test cases with single- and multispecies hard-sphere and hard-disc particles modelled with fundamental measure theory, with and without van der Waals attractive forces, in bounded and unbounded physical domains. We show that our results satisfy statistical mechanical sum rules.

cs.CE↗

arXiv2017

Statistical Mechanics of a Thin Film on a Solid Substrate

We study the behavior of very thin liquid films wetting homogeneous planar and spherical substrates. In order to describe a simple fluid at very small scales, we employ a classical density functional theory (DFT). Here, we model a fluid with a local density approximation (LDA) for its hard-sphere contribution and assume that the intermolecular attractive forces are long-range. In particular, we first introduce the basic concept of DFT, and then present computations for fluid films on planar and spherically symmetric walls. We present equilibrium density profiles and adsorption isotherms. We also compare our results to predictions from a sharp-interface approximation (SIA) and suggest a piecewise function approximation (PFA), which assumes that the density profile at the wall-liquid and the liquid-vapor interfaces varies smoothly.

cond-mat.stat-mech↗

arXiv2014

A comparison of slip, disjoining pressure, and interface formation models for contact line motion through asymptotic analysis of thin two-dimensional droplet spreading

The motion of a contact line is examined, and comparisons drawn, for a variety of models proposed in the literature. Pressure and stress behaviours at the contact line are examined in the prototype system of quasistatic spreading of a thin two-dimensional droplet on a planar substrate. The models analysed include three disjoining pressure models based on van der Waals interactions, a model introduced for polar fluids, and a liquid-gas diffuse-interface model; Navier-slip and two non-linear slip models are investigated, with three microscopic contact angle boundary conditions imposed (two of these contact angle conditions having a contact line velocity dependence); and the interface formation model is also considered. In certain parameter regimes it is shown that all of the models predict the same quasistatic droplet spreading behaviour.

physics.flu-dyn↗

arXiv2014

Fluid structure in the immediate vicinity of an equilibrium three-phase contact line and assessment of disjoining pressure models using density functional theory

We examine the nanoscale behavior of an equilibrium three-phase contact line in the presence of long-ranged intermolecular forces by employing a statistical mechanics of fluids approach, namely density functional theory (DFT) together with fundamental measure theory (FMT). This enables us to evaluate the predictive quality of effective Hamiltonian models in the vicinity of the contact line. In particular, we compare the results for mean field effective Hamiltonians with disjoining pressures defined through (I) the adsorption isotherm for a planar liquid film, and (II) the normal force balance at the contact line. We find that the height profile obtained using (I) shows good agreement with the adsorption film thickness of the DFT-FMT equilibrium density profile in terms of maximal curvature and the behavior at large film heights. In contrast, we observe that while the height profile obtained by using (II) satisfies basic sum rules, it shows little agreement with the adsorption film thickness of the DFT results. The results are verified for contact angles of 20, 40 and 60 degrees.

physics.flu-dyn↗

arXiv2013

Symmetry Analysis in Linear Hydrodynamic Stability Theory: Classical and New Modes in Linear Shear

We present a symmetry classification of the linearised Navier-Stokes equations for a two-dimensional unbounded linear shear flow of an incompressible fluid. The full set of symmetries is employed to systematically derive invariant ansatz functions. The symmetry analysis grasps three approaches. Two of them are existing ones, representing the classical normal modes and the Kelvin modes, while the third is a novel approach and leads to a new closed-form solution of traveling modes, showing qualitatively different behaviour in energetics, shape and kinematics when compared to the classical approaches. The last modes are energy conserving in the inviscid case. They are localized in the cross-stream direction and periodic in the streamwise direction. As for the kinematics, they travel at constant velocity in the cross-stream direction, whilst in the streamwise direction they are accelerated by the base flow. In the viscous case, the modes break down due to damping of high wavenumber contributions.

physics.flu-dyn↗

arXiv2013

The contact line behaviour of solid-liquid-gas diffuse-interface models

A solid-liquid-gas moving contact line is considered through a diffuse-interface model with the classical boundary condition of no-slip at the solid surface. Examination of the asymptotic behaviour as the contact line is approached shows that the relaxation of the classical model of a sharp liquid-gas interface, whilst retaining the no-slip condition, resolves the stress and pressure singularities associated with the moving contact line problem while the fluid velocity is well defined (not multi-valued). The moving contact line behaviour is analysed for a general problem relevant for any density dependent dynamic viscosity and volume viscosity, and for general microscopic contact angle and double well free-energy forms. Away from the contact line, analysis of the diffuse-interface model shows that the Navier--Stokes equations and classical interfacial boundary conditions are obtained at leading order in the sharp-interface limit, justifying the creeping flow problem imposed in an intermediate region in the seminal work of Seppecher [Int. J. Eng. Sci. 34, 977--992 (1996)]. Corrections to Seppecher's work are given, as an incorrect solution form was originally used.

physics.flu-dyn↗

arXiv2013

Wetting on a spherical wall: influence of liquid-gas interfacial properties

We study the equilibrium of a liquid film on an attractive spherical substrate for an intermolecular interaction model exhibiting both fluid-fluid and fluid-wall long-range forces. We first reexamine the wetting properties of the model in the zero-curvature limit, i.e., for a planar wall, using an effective interfacial Hamiltonian approach in the framework of the well known sharp-kink approximation (SKA). We obtain very good agreement with a mean-field density functional theory (DFT), fully justifying the use of SKA in this limit. We then turn our attention to substrates of finite curvature and appropriately modify the so-called soft-interface approximation (SIA) originally formulated by Napiórkowski and Dietrich [Phys. Rev. B 34, 6469 (1986)] for critical wetting on a planar wall. A detailed asymptotic analysis of SIA confirms the SKA functional form for the film growth. However, it turns out that the agreement between SKA and our DFT is only qualitative. We then show that the quantitative discrepancy between the two is due to the overestimation of the liquid-gas surface tension within SKA. On the other hand, by relaxing the assumption of a sharp interface, with, e.g., a simple smoothing of the density profile there, markedly improves the predictive capability of the theory, making it quantitative and showing that the liquid-gas surface tension plays a crucial role when describing wetting on a curved substrate. In addition, we show that in contrast to SKA, SIA predicts the expected mean-field critical exponent of the liquid-gas surface tension.

cond-mat.stat-mech↗

arXiv2013

On the moving contact line singularity: Asymptotics of a diffuse-interface model

The behaviour of a solid-liquid-gas system near the three-phase contact line is considered using a diffuse-interface model with no-slip at the solid and where the fluid phase is specified by a continuous density field. Relaxation of the classical approach of a sharp liquid-gas interface and careful examination of the asymptotic behaviour as the contact line is approached is shown to resolve the stress and pressure singularities associated with the moving contact line problem. Various features of the model are scrutinised, alongside extensions to incorporate slip, finite-time relaxation of the chemical potential, or a precursor film at the wall.

physics.flu-dyn↗

arXiv2012

Generalized dynamical density functional theory for classical fluids and the significance of inertia and hydrodynamic interactions

We study the dynamics of a colloidal fluid including inertia and hydrodynamic interactions, two effects which strongly influence the non-equilibrium properties of the system. We derive a general dynamical density functional theory (DDFT) which shows very good agreement with full Langevin dynamics. In suitable limits, we recover existing DDFTs and a Navier-Stokes-like equation with additional non-local terms.

cond-mat.stat-mech↗