SearcharxivSearch

arXiv subjects

Andreas Pitsillides

Publications and source records attributed to Andreas Pitsillides.

At least 19 recordsLinked to original sources

Engineering Yeast Cells to Facilitate Information Exchange

Although continuous advances in theoretical modelling of Molecular Communications (MC) are observed, there is still an insuperable gap between theory and experimental testbeds, especially at the microscale. In this paper, the development of the first testbed incorporating engineered yeast cells is reported. Different from the existing literature, eukaryotic yeast cells are considered for both the sender and the receiver, with {\alpha}-factor molecules facilitating the information transfer. The use of such cells is motivated mainly by the well understood biological mechanism of yeast mating, together with their genetic amenability. In addition, recent advances in yeast biosensing establish yeast as a suitable detector and a neat interface to in-body sensor networks. The system under consideration is presented first, and the mathematical models of the underlying biological processes leading to an end-to-end (E2E) system are given. The experimental setup is then described and used to obtain experimental results which validate the developed mathematical models. Beyond that, the ability of the system to effectively generate output pulses in response to repeated stimuli is demonstrated, reporting one event per two hours. However, fast RNA fluctuations indicate cell responses in less than three minutes, demonstrating the potential for much higher rates in the future.

cs.ET

5G D2D Transmission Mode Selection Performance & Cluster Limits Evaluation of Distributed Artificial Intelligence and Machine Learning Techniques

5G D2D Communication promises improvements in energy and spectral efficiency, overall system capacity, and higher data rates. However, to achieve optimum results it is important to select wisely the Transmission mode of the D2D Device to form clusters in the most fruitful positions in terms of Sum Rate and Power Consumption. Towards this end, this paper investigates the use of Distributed Artificial Intelligence (DAI) and innovative to D2D, Machine Learning (ML) approaches to achieve satisfactory results in terms of Spectral Efficiency (SE), Power Consumption (PC) and execution time, with the creation of clusters and backhauling D2D network under existing Base Station/Small Cell. Additionally, one of the major factors that affect the creation of high-quality clusters under a D2D network is the number of the Devices. Therefore, this paper focuses on a small (<=200) number of Devices, with the purpose to identify the limits of each approach in terms of number of devices. Specifically, to identify where it is beneficial to form a cluster, investigate the critical point that gains increases rapidly and at the end examine the applicability of 5G requirements. Additionally, prior work presented a Distributed Artificial Intelligence (DAI) Solution/Framework in D2D and a DAIS Transmission Mode Selection (TMS) plan was proposed. In this paper DAIS is further examined, improved in terms of thresholds evaluation, evaluated, and compared with other approaches (AI/ML). The results obtained demonstrate the exceptional performance of DAIS, compared to all other related approaches in terms of SE, PC, execution time and cluster formation efficiency. Also, results show that the investigated AI/ML approaches are also beneficial for Transmission Mode Selection (TMS) in 5G D2D communication, even with a smaller (i.e., >=5 D2D Relay,>=50 D2D Multi Hop Relay) numbers of devices as a lower limits.

cs.NI

Performance Evaluation of Transmission Mode Selection in D2D communication

Device to Device (D2D) Communication is expected to be a core part of the forthcoming 5G Mobile Communication Networks as it promises improvements in energy efficiency, spectral efficiency, overall system capacity, and higher data rates with the use of the same frequencies for different D2D transmissions in short communication distances within the Cell. However, in order to achieve optimum results, it is important, among others, to select wisely the Transmission Mode of the D2D Device. Towards this end, our previous work proposed an intelligent Transmission mode selection approach in a framework that is utilizing Artificial Intelligence (AI) BDIx agents to collectively satisfy the D2D challenges in a Distributed Artificial Intelligent (DAI) manner autonomously and independently. In this paper, as a first step, a literature review focused on related Transmission mode approaches, is performed. Then, our investigated Transmission mode selection approach is further explained with formulas and evaluated based on different threshold values and investigated how these can affect the overall spectral efficiency and power usage of the network in order to achieve the maximum performance. The investigated thresholds(i.e. D2D Device Weighted Data Rate (WDR) and the D2D Device Battery Power Level) and metrics(i.e. WDR) are also further analyzed and formulated. In addition, the effect the transmission power of the D2D links has on the total spectral efficiency and total power consumption of the network, is also examined. This evaluation results arise some interesting findings that can contribute in other approaches that utilized similar or same thresholds. Also, the results obtained demonstrate that with the right tuning of the thresholds and transmission power, one can achieve a significant improvement in the network power usage and total spectral efficiency.

cs.NI

Workload Characterization of Programmable Metasurfaces

Metasurfaces are envisaged to play a key role in next-generation wireless systems due to their powerful control over electromagnetic waves. The last decade has witnessed huge advances in this regard, shifting from static to programmable metasurfaces. The HyperSurface (HSF) paradigm takes one step further by integrating a network of controllers within the device with the aim of adding intelligence, connectivity, and autonomy. However, little is known about the traffic that this network will have to support as the target electromagnetic function or boundary conditions change. In this paper, we lay down the foundations of a methodology to characterize the workload of programmable metasurfaces and then employ it to analyze the case of beam steering HSFs. We observe that traffic is bursty and highly dependent on the position of the target. These results will enable the early-stage evaluation of intra-HSF networks, as well as the estimation of the system performance and cost.

cs.NI

Toward Fault-Tolerant Deadlock-Free Routing in HyperSurface-Embedded Controller Networks

HyperSurfaces (HSFs) consist of structurally reconfigurable metasurfaces whose electromagnetic properties can be changed via a software interface, using an embedded miniaturized network of controllers. With the HSF controllers, interconnected in an irregular, near-Manhattan geometry, we propose a robust, deterministic Fault-Tolerant (FT), deadlock- and livelock-free routing protocol where faults are contained in a set of disjointed rectangular regions called faulty blocks. The proposed FT protocol can support an unbounded number of faulty nodes as long as nodes outside the faulty blocks are connected. Simulation results show the efficacy of the proposed FT protocol under various faulty node distribution scenarios.

cs.NI

Nanoantennas Design for THz Communication: Material Selection and Performance Enhancement

In the development of terahertz (THz) communication systems, the nanoantenna is the most significant component. Especially, the focus is to design highly directive antennas, because it enhances the performance of the overall system by compensating the large path loss at THz and thus improves the signal-to-noise ratio. This paper presents suitable material for nanoantenna design and the advancement in their performance for THz communications. Copper, Graphene, and carbon nanotube materials are used as promising candidates for nanoantenna design. The performance of nanoantennas is carried out by analyzing the properties and behavior of the material at THz. Results show that the Graphene nanoantenna provides better performance in terms of miniaturization, directivity, and radiation efficiency. Further, the performance enhancement of the nanoantenna at THz is studied by dynamically adjusting the surface conductivity via the chemical potential of Graphene using the electric field effect. The performance of the nanoantenna is enhanced in terms of high miniaturization, high directivity, low reflection, frequency reconfiguration, and stable impedance. The THz nanoantennas using Graphene have the potential to be used for THz communication systems. In view of the smart THz wireless environment; this paper finally presents a THz Hypersurface using Graphene meta-atoms. The user-side Graphene nanoantennas and environment-side Graphene Hypersurface can build a promising smart THz wireless environment.

eess.SP

End-to-end Wireless Path Deployment with Intelligent Surfaces Using Interpretable Neural Networks

Intelligent surfaces exert deterministic control over the wireless propagation phenomenon, enabling novel capabilities in performance, security and wireless power transfer. Such surfaces come in the form of rectangular tiles that cascade to cover large surfaces such as walls, ceilings or building facades. Each tile is addressable and can receive software commands from a controller, manipulating an impinging electromagnetic wave upon it by customizing its reflection direction, focus, polarization and phase. A new problem arises concerning the orchestration of a set of tiles towards serving end-to-end communication objectives. Towards that end, we propose a novel intelligent surface networking algorithm based on interpretable neural networks. Tiles are mapped to neural network nodes and any tile line-of-sight connectivity is expressed as a neural network link. Tile wave manipulation functionalities are captured via geometric reflection with virtually rotatable tile surface norm, thus being able to tunable distribute power impinging upon a tile over the corresponding neural network links, with the corresponding power parts acting as the link weights. A feedforward/backpropagate process optimizes these weights to match ideal propagation outcomes (normalized network power outputs) to wireless user emissions (normalized network power inputs). An interpretation process translates these weights to the corresponding tile wave manipulation functionalities.

eess.SP

Transfer of Manure as Fertilizer from Livestock Farms to Crop Fields: The Case of Catalonia

Intensive livestock production might have a negative environmental impact, by producing large amounts of animal manure, which, if not properly managed, can contaminate nearby water bodies with nutrient excess. However, if animal manure is exported to nearby crop fields, to be used as organic fertilizer, pollution can be mitigated. It is a single-objective optimization problem, in regards to finding the best solution for the logistics process of satisfying nutrient needs of crops by means of livestock manure. This paper proposes three different approaches to solve the problem: a centralized optimal algorithm (COA), a decentralized nature-inspired cooperative technique, based on the foraging behaviour of ants (AIA), as well as a naive neighbour-based method (NBS), which constitutes the existing practice used today in an ad hoc, uncoordinated manner in Catalonia. Results show that the COA approach is 8.5% more efficient than the AIA. However, the AIA approach is fairer to the farmers and more balanced in terms of average transportation distances that need to be covered by each livestock farmer, while it is 1.07 times more eefficient than the NBS. Our work constitutes the first application of a decentralized AIA to this interesting real-world problem, in a domain where swarm intelligence methods are still under-exploited.

physics.soc-ph

Transfer of Manure from Livestock Farms to Crop Fields as Fertilizer using an Ant Inspired Approach

Intensive livestock production might have a negative environmental impact, by producing large amounts of animal excrements, which, if not properly managed, can contaminate nearby water bodies with nutrient excess. However, if animal manure is exported to distant crop fields, to be used as organic fertilizer, pollution can be mitigated. It is a single-objective optimization problem, in regards to finding the best solution for the logistics process of satisfying nutrient crops needs by means of livestock manure. This paper proposes a dynamic approach to solve the problem, based on a decentralized nature-inspired cooperative technique, inspired by the foraging behavior of ants (AIA). Results provide important insights for policy-makers over the potential of using animal manure as fertilizer for crop fields, while AIA solves the problem effectively, in a fair way to the farmers and well balanced in terms of average transportation distances that need to be covered by each livestock farmer. Our work constitutes the first application of a decentralized AIA to this interesting real-world problem, in a domain where swarm intelligence methods are still under-exploited.

physics.soc-ph

Graphene Hypersurface for Manipulation of THz Waves

In this work, we investigated graphene hypersurface (HSF) for the manipulation of THz waves. The graphene HSF structure is consists of a periodic array of graphene unit cells deposited on silicon substrate and terminated by a metallic ground plane. The performance of the proposed HSF is numerically analyzed. Electromagnetic parameters of HSF such as permeability, permittivity, and impedance are studied. The proposed graphene HSF has active control over absorption, reflection, and transmission of THz waves. The graphene HSF provides perfect absorption, zero reflection and zero transmission at resonance. Moreover, the graphene HSF structure has the advantage of anomalous reflection and frequency reconfiguration. Incident waves can be reflected in the desired direction, depending on the phase gradient of the HSF and the perfect absorption is maintained at all reconfigurable frequencies upon reconfiguration. The results reveal the effectiveness of the graphene HSF for the manipulation of THz waves.

eess.SP

Impact of Graphene Thickness on EM Modelling of Antenna

This paper presents illustrative electromagnetic modelling and simulation of graphene antenna using a two-dimensional graphene sheet of zero thickness and a three-dimensional graphene slab of finite thickness. The properties of the antenna are analyzed in terms of the S11 parameter, input impedance, VSWR, radiation pattern, and frequency reconfiguration using the full-wave electromagnetic simulator. Furthermore, this work numerically studies the modelling of graphene antenna using a three-dimensional graphene thin slab and the impact of graphene slab thickness on the performance of graphene antenna.

physics.app-ph

Mobility-aware Beam Steering in Metasurface-based Programmable Wireless Environments

Programmable wireless environments (PWEs) utilize electromagnetic metasurfaces to transform wireless propagation into a software-controlled resource. In this work we study the effects of user device mobility on the efficiency of PWEs. An analytical model is proposed, which describes the potential misalignment between user-emitted waves and the active PWE configuration, and can constitute the basis for studying queuing problems in PWEs. Subsequently, a novel, beam steering approach is proposed which can effectively mitigate the misalignment effects. Ray-tracing-based simulations evaluate the proposed scheme.

cs.ET

Exploration of Intercell Wireless Millimeter-Wave Communication in the Landscape of Intelligent Metasurfaces

Software-defined metasurfaces are electromagnetically ultra-thin, artificial components that can provide engineered and externally controllable functionalities. The control over these functionalities is enabled by the metasurface tunability, which is implemented by embedded electronic circuits that modify locally the surface resistance and reactance. Integrating controllers within the metasurface cells, able to intercommunicate and adaptively reconfigure it, thus imparting a desired electromagnetic operation, opens the path towards the creation of an artificially intelligent (AI) fabric where each unit cell can have its own sensing, programmable computing, and actuation facilities. In this work we take a crucial step towards bringing the AI metasurface technology to emerging applications, in particular exploring the wireless mm-wave intercell communication capabilities in a software-defined HyperSurface designed for operation is the microwave regime. We examine three different wireless communication channels within the landscape of the reflective metasurface: Firstly, in the layer where the control electronics of the HyperSurface lie, secondly inside a dedicated layer enclosed between two metallic plates, and, thirdly, inside the metasurface itself. For each case we examine the physical implementation of the mm-wave transponder nodes, we quantify communication channel metrics, and we identify complexity vs. performance trade-offs.

physics.app-ph

Distributed Artificial Intelligence Solution for D2D Communication in 5G Networks

Device to Device (D2D) Communication is one of the technology components of the evolving 5G architecture, as it promises improvements in energy efficiency, spectral efficiency, overall system capacity, and higher data rates. The above noted improvements in network performance spearheaded a vast amount of research in D2D, which have identified significant challenges that need to be addressed before realizing their full potential in emerging 5G Networks. Towards this end, this paper proposes the use of a distributed intelligent approach to control the generation of D2D networks. More precisely, the proposed approach uses Belief-Desire-Intention (BDI) intelligent agents with extended capabilities (BDIx) to manage each D2D node independently and autonomously, without the help of the Base Station. The paper includes detailed algorithmic description for the decision of transmission mode, which maximizes the data rate, minimizes the power consumptions, while taking into consideration the computational load. Simulations show the applicability of BDI agents in jointly solving D2D challenges.

cs.NI

Wideband Perfect Absorption Polarization Insensitive Reconfigurable Graphene Metasurface for THz Wireless Environment

In this work, we investigated a simple structured graphene terahertz (THz) metasurface (MSF) with perfect absorption, wideband, polarization insensitive, oblique incidence insensitive and frequency reconfiguration. The graphene MSF structure is composed of a two-dimensional periodic array of graphene meta-atoms deposited on the silicon substrate terminated by a metal ground plane. The performance of the proposed MSF is numerically analyzed. An equivalent circuit model of the structure and its closed-form solution is introduced. The graphene MSF thin structure at 2.5 THz provides 100% of absorption with wide bandwidth, zero reflection and zero transmission at normal incidence in both transverse electric (TE) and transverse magnetic (TM) polarization. Under oblique incidence, the absorption is maintained at higher than 95%. Moreover, the graphene MSF structure has the advantage of frequency reconfiguration. The excellent absorption performance is maintained at all reconfigurable frequencies upon reconfiguration. The results reveal the effectiveness of the THz MSF with graphene meta-atoms, which can be promising for THz wireless environment.

eess.SP

3D Channel Modeling and Characterization for Hypersurface Empowered Indoor Environment at 60 GHz Millimeter-Wave Band

This paper proposes a three-dimensional (3D) communication channel model for an indoor environment considering the effect of the Hypersurface. The Hypersurface is a software controlled intelligent metasurface, which can be used to manipulate electromagnetic waves, as for example for non-specular reflection and full absorption. Thus it can control the impinging rays from a transmitter towards a receiver location in both LOS and NLOS paths, e.g. to combat distance and improve wireless connectivity. We focus on the 60 GHz mmWave frequency band due to its increasing significance in 5G/6G networks and evaluate the effect of Hypersurface in an indoor environment in terms of attenuation coefficients related to the Hypersurface reflection and absorption functionalities, using CST simulation, a 3D electromagnetic simulator of high frequency components. To highlight the benefits of Hypersurface coated walls versus plain walls, we use the derived Hypersurface 3D channel model and a custom 3D ray-tracing simulator for plain walls considering a typical indoor scenario for different Tx-Rx location and separation distances.

eess.SP

An Interpretable Neural Network for Configuring Programmable Wireless Environments

Software-defined metasurfaces (SDMs) comprise a dense topology of basic elements called meta-atoms, exerting the highest degree of control over surface currents among intelligent panel technologies. As such, they can transform impinging electromagnetic (EM) waves in complex ways, modifying their direction, power, frequency spectrum, polarity and phase. A well-defined software interface allows for applying such functionalities to waves and inter-networking SDMs, while abstracting the underlying physics. A network of SDMs deployed over objects within an area, such as a floorplan walls, creates programmable wireless environments (PWEs) with fully customizable propagation of waves within them. This work studies the use of machine learning for configuring such environments to the benefit of users within. The methodology consists of modeling wireless propagation as a custom, interpretable, back-propagating neural network, with SDM elements as nodes and their cross-interactions as links. Following a training period the network learns the propagation basics of SDMs and configures them to facilitate the communication of users within their vicinity.

cs.ET

Joint Compressed Sensing and Manipulation of Wireless Emissions with Intelligent Surfaces

Programmable, intelligent surfaces can manipulate electromagnetic waves impinging upon them, producing arbitrarily shaped reflection, refraction and diffraction, to the benefit of wireless users. Moreover, in their recent form of HyperSurfaces, they have acquired inter-networking capabilities, enabling the Internet of Material Properties with immense potential in wireless communications. However, as with any system with inputs and outputs, accurate sensing of the impinging wave attributes is imperative for programming HyperSurfaces to obtain a required response. Related solutions include field nano-sensors embedded within HyperSurfaces to perform minute measurements over the area of the HyperSurface, as well as external sensing systems. The present work proposes a sensing system that can operate without such additional hardware. The novel scheme programs the HyperSurface to perform compressed sensing of the impinging wave via simple one-antenna power measurements. The HyperSurface can jointly be programmed for both wave sensing and wave manipulation duties at the same time. Evaluation via simulations validates the concept and highlight its promising potential.

cs.ET