arXiv subjects

Andreas Wicht

Publications and source records attributed to Andreas Wicht.

16 recordsLinked to original sources

arXiv2025

A 698 nm laser system for excitation of fluorescent quantum light sources on a CubeSat mission

This manuscript reports on the development and qualification of an ECDL-based, fiber-coupled laser system at a wavelength of {\lambda} = 698 nm for space applications. We designed and developed the optical and mechanical configuration, along with the laser driving and thermal management electronics, to meet space compatibility requirements. Validation tests were conducted on off-the-shelf components to assess their suitability for satellite deployment. The final system integrates all components into a compact design optimized for CubeSat platforms.

physics.optics↗

arXiv2025

Apparatus for quantum-mixture research in microgravity

Experiments with ultracold quantum gases are a rapidly advancing research field with many applications in fundamental physics and quantum technology. Here, we report on a high-flux generation of Bose-Einstein condensate mixtures of $^{41}$K and $^{87}$Rb, using a fully integrated sounding rocket setup. We compare the release and the free expansion of the quantum mixtures obtained with the apparatus placed on ground or in free fall in an Einstein-Elevator. The release dynamics are governed by the intra- and interspecies interactions as well as the decaying magnetic field during the release. The latter can be minimized by a dedicated switch-off protocol of the trap generating currents where an exact model enabled us to characterize the interaction effects. Our results establish a new benchmark for generating ultracold mixtures on mobile platforms, with direct relevance for future experiments on interacting quantum gases and tests of the equivalence principle in space.

cond-mat.quant-gas↗

arXiv2025

Comparison of laser system designs for quantum technologies: BECCAL flight system vs. BECCAL ground test bed

We present the design of laser systems for the Bose-Einstein Condensate and Cold Atom Laboratory (BECCAL) payload, enabling numerous quantum technological experiments onboard the International Space Station (ISS), in particular dual species 87Rb and 41K Bose-Einstein condensates. A flight model (FM) and a commercial off the shelf (COTS) based model are shown, both of which meet the BECCAL requirements in terms of functionality, but have differing size, weight and power (SWaP) and environmental requirements. The capabilities of both models are discussed and characteristics compared. The flight model of BECCAL uses specifically developed and qualified custom components to create a compact and robust system suitable for long-term remote operation onboard the ISS. This system is based on ECDL-MOPA lasers and free-space optical benches made of Zerodur, as well as commercial fibre components. The COTS-based system utilizes entirely commercial parts to create a functionally equivalent system for operation in a standard laboratory, without the strict SWaP and environmental constraints of the flight model.

physics.atom-ph↗

arXiv2024

Combining Bayesian Optimization, SVD and Machine Learning for Advanced Optical Design

The design and optimization of optical components, such as Bragg gratings, are critical for applications in telecommunications, sensing, and photonic circuits. To overcome the limitations of traditional design methods that rely heavily on computationally intensive simulations and large datasets, we propose an integrated methodology that significantly reduces these burdens while maintaining high accuracy in predicting optical response. First, we employ a Bayesian optimization technique to strategically select a limited yet informative number of simulation points from the design space, ensuring that each contributes maximally to the model's performance. Second, we utilize singular value decomposition to effectively parametrize the entire reflectance spectra into a reduced set of coefficients, allowing us to capture all significant spectral features without losing crucial information. Finally, we apply XGBoost, a robust machine learning algorithm, to predict the entire reflectance spectra from the reduced dataset. The combination of Bayesian optimization for data selection, SVD for full-spectrum fitting, and XGBoost for predictive modeling provides a powerful, generalizable framework for the design of optical components.

physics.optics↗

arXiv2024

Mode-Coupling-Driven Frequency Stabilization in Semiconductor Lasers with Bragg Grating Waveguide

Precisely stabilizing laser frequency is crucial for advancing laser technology and unlocking the full potential of various quantum technologies. Here, we propose a compact device for stabilizing frequency of a semiconductor laser through mode coupling effects, which provides enhanced sensitivity. Our proposed architecture features a main ridge waveguide with a Bragg grating, flanked by two curved ridge waveguides. This configuration exhibits an optical phenomenon characterized by a transmission crossing at the wavelength of the Bragg grating. Using particle swarm optimization strategy and employing efficient figures of merit, we achieve a high transmission crossing. The observed asymmetric transmission crossing not only holds the promise for an efficient and compact on-chip laser frequency stabilizer, but also fosters the development of novel sensing platforms with heightened sensitivity.

physics.optics↗

arXiv2023

Optimal Data Generation in Multi-Dimensional Parameter Spaces, using Bayesian Optimization

Acquiring a substantial number of data points for training accurate machine learning (ML) models is a big challenge in scientific fields where data collection is resource-intensive. Here, we propose a novel approach for constructing a minimal yet highly informative database for training ML models in complex multi-dimensional parameter spaces. To achieve this, we mimic the underlying relation between the output and input parameters using Gaussian process regression (GPR). Using a set of known data, GPR provides predictive means and standard deviation for the unknown data. Given the predicted standard deviation by GPR, we select data points using Bayesian optimization to obtain an efficient database for training ML models. We compare the performance of ML models trained on databases obtained through this method, with databases obtained using traditional approaches. Our results demonstrate that the ML models trained on the database obtained using Bayesian optimization approach consistently outperform the other two databases, achieving high accuracy with a significantly smaller number of data points. Our work contributes to the resource-efficient collection of data in high-dimensional complex parameter spaces, to achieve high precision machine learning predictions.

cs.LG↗

arXiv2023

A Dual-Species Atom Interferometer Payload for Operation on Sounding Rockets

We report on the design and the construction of a sounding rocket payload capable of performing atom interferometry with Bose-Einstein condensates of $^{41}$K and $^{87}$Rb. The apparatus is designed to be launched in two consecutive missions with a VSB-30 sounding rocket and is qualified to withstand the expected vibrational loads of 1.8 g root-mean-square in a frequency range between 20 - 2000 Hz and the expected static loads during ascent and re-entry of 25 g. We present a modular design of the scientific payload comprising a physics package, a laser system, an electronics system and a battery module. A dedicated on-board software provides a largely automated process of predefined experiments. To operate the payload safely in laboratory and flight mode, a thermal control system and ground support equipment has been implemented and will be presented. The payload presented here represents a cornerstone for future applications of matter wave interferometry with ultracold atoms on satellites.

physics.atom-ph↗

arXiv2021

A Prototype of a Compact Rubidium-Based Optical Frequency Reference for Operation on Nanosatellites

Space-borne optical frequency references based on spectroscopy of atomic vapors may serve as an integral part of compact optical atomic clocks, which can advance global navigation systems, or can be utilized for earth observation missions as part of laser systems for cold atom gradiometers. Nanosatellites offer low launch-costs, multiple deployment opportunities and short payload development cycles, enabling rapid maturation of optical frequency references and underlying key technologies in space. Towards an in-orbit demonstration on such a platform, we have developed a CubeSat-compatible prototype of an optical frequency reference based on the D2-transition in rubidium. A frequency instability of 1.7e-12 at 1 s averaging time is achieved. The optical module occupies a volume of 35 cm^3, weighs 73 g and consumes 780 mW of power.

physics.atom-ph↗

arXiv2021

Ultracold atom interferometry in space

Bose-Einstein condensates (BECs) in free fall constitute a promising source for space-borne matter-wave interferometry. Indeed, BECs enjoy a slowly expanding wave function, display a large spatial coherence and can be engineered and probed by optical techniques. On a sounding rocket, we explore matter-wave fringes of multiple spinor components of a BEC released in free fall employing light-pulses to drive Bragg processes and induce phase imprinting. The prevailing microgravity played a crucial role in the observation of these interferences which not only reveal the spatial coherence of the condensates but also allow us to measure differential forces. Our work establishes matter-wave interferometry in space with future applications in fundamental physics, navigation and Earth observation.

physics.atom-ph↗

arXiv2019

The Bose-Einstein Condensate and Cold Atom Laboratory

Microgravity eases several constraints limiting experiments with ultracold and condensed atoms on ground. It enables extended times of flight without suspension and eliminates the gravitational sag for trapped atoms. These advantages motivated numerous initiatives to adapt and operate experimental setups on microgravity platforms. We describe the design of the payload, motivations for design choices, and capabilities of the Bose-Einstein Condensate and Cold Atom Laboratory (BECCAL), a NASA-DLR collaboration. BECCAL builds on the heritage of previous devices operated in microgravity, features rubidium and potassium, multiple options for magnetic and optical trapping, different methods for coherent manipulation, and will offer new perspectives for experiments on quantum optics, atom optics, and atom interferometry in the unique microgravity environment on board the International Space Station.

physics.atom-ph↗

arXiv2019

On-Chip Integration of Single Solid-State Quantum Emitters with a SiO$_2$ Photonic Platform

One important building block for future integrated nanophotonic devices is the scalable on-chip interfacing of single photon emitters and quantum memories with single optical modes. Here we present the deterministic integration of a single solid-state qubit, the nitrogen-vacancy (NV) center, with a photonic platform consisting exclusively of SiO$_2$ grown thermally on a Si substrate. The platform stands out by its ultra-low fluorescence and the ability to produce various passive structures such as high-Q microresonators and mode-size converters. By numerical analysis an optimal structure for the efficient coupling of a dipole emitter to the guided mode could be determined. Experimentally, the integration of a preselected NV emitter was performed with an atomic force microscope and the on-chip excitation of the quantum emitter as well as the coupling of single photons to the guided mode of the integrated structure could be demonstrated. Our approach shows the potential of this platform as a robust nanoscale interface of on-chip photonic structures with solid-state qubits.

physics.optics↗

arXiv2018

Space-borne Bose-Einstein condensation for precision interferometry

Space offers virtually unlimited free-fall in gravity. Bose-Einstein condensation (BEC) enables ineffable low kinetic energies corresponding to pico- or even femtokelvins. The combination of both features makes atom interferometers with unprecedented sensitivity for inertial forces possible and opens a new era for quantum gas experiments. On January 23, 2017, we created Bose-Einstein condensates in space on the sounding rocket mission MAIUS-1 and conducted 110 experiments central to matter-wave interferometry. In particular, we have explored laser cooling and trapping in the presence of large accelerations as experienced during launch, and have studied the evolution, manipulation and interferometry employing Bragg scattering of BECs during the six-minute space flight. In this letter, we focus on the phase transition and the collective dynamics of BECs, whose impact is magnified by the extended free-fall time. Our experiments demonstrate a high reproducibility of the manipulation of BECs on the atom chip reflecting the exquisite control features and the robustness of our experiment. These properties are crucial to novel protocols for creating quantum matter with designed collective excitations at the lowest kinetic energy scales close to femtokelvins.

physics.atom-ph↗

arXiv2016

Miniaturized lab system for future cold atom experiments in microgravity

We present the technical realization of a compact system for performing experiments with cold $^{87}{\text{Rb}}$ and $^{39}{\text{K}}$ atoms in microgravity in the future. The whole system fits into a capsule to be used in the drop tower Bremen. One of the advantages of a microgravity environment is long time evolution of atomic clouds which yields higher sensitivities in atom interferometer measurements. We give a full description of the system containing an experimental chamber with ultra-high vacuum conditions, miniaturized laser systems, a high-power thulium-doped fiber laser, the electronics and the power management. In a two-stage magneto-optical trap atoms should be cooled to the low $μ$K regime. The thulium-doped fiber laser will create an optical dipole trap which will allow further cooling to sub-$μ$K temperatures. The presented system fulfills the demanding requirements on size and power management for cold atom experiments on a microgravity platform, especially with respect to the use of an optical dipole trap. A first test in microgravity, including the creation of a cold Rb ensemble, shows the functionality of the system.

physics.atom-ph↗

arXiv2016

Autonomous frequency stabilization of two extended cavity diode lasers at the potassium wavelength on a sounding rocket

We have developed, assembled, and flight-proven a stable, compact, and autonomous extended cavity diode laser (ECDL) system designed for atomic physics experiments in space. To that end, two micro-integrated ECDLs at 766.7 nm were frequency stabilized during a sounding rocket flight by means of frequency modulation spectroscopy (FMS) of 39^K and offset locking techniques based on the beat note of the two ECDLs. The frequency stabilization as well as additional hard- and software to test hot redundancy mechanisms were implemented as part of a state-machine, which controlled the experiment completely autonomously throughout the entire flight mission.

physics.atom-ph↗

arXiv2014

Design of a dual species atom interferometer for space

Atom interferometers have a multitude of proposed applications in space including precise measurements of the Earth's gravitational field, in navigation & ranging, and in fundamental physics such as tests of the weak equivalence principle (WEP) and gravitational wave detection. While atom interferometers are realized routinely in ground-based laboratories, current efforts aim at the development of a space compatible design optimized with respect to dimensions, weight, power consumption, mechanical robustness and radiation hardness. In this paper, we present a design of a high-sensitivity differential dual species $^{85}$Rb/$^{87}$Rb atom interferometer for space, including physics package, laser system, electronics and software. The physics package comprises the atom source consisting of dispensers and a 2D magneto-optical trap (MOT), the science chamber with a 3D-MOT, a magnetic trap based on an atom chip and an optical dipole trap (ODT) used for Bose-Einstein condensate (BEC) creation and interferometry, the detection unit, the vacuum system for $10^{-11}$ mbar ultra-high vacuum generation, and the high-suppression factor magnetic shielding as well as the thermal control system. The laser system is based on a hybrid approach using fiber-based telecom components and high-power laser diode technology and includes all laser sources for 2D-MOT, 3D-MOT, ODT, interferometry and detection. Manipulation and switching of the laser beams is carried out on an optical bench using Zerodur bonding technology. The instrument consists of 9 units with an overall mass of 221 kg, an average power consumption of 608 W (819 W peak), and a volume of 470 liters which would well fit on a satellite to be launched with a Soyuz rocket, as system studies have shown.

physics.ins-det↗

arXiv2008

Astrodynamical Space Test of Relativity using Optical Devices I (ASTROD I) - A class-M fundamental physics mission proposal for Cosmic Vision 2015-2025

ASTROD I is a planned interplanetary space mission with multiple goals. The primary aims are: to test General Relativity with an improvement in sensitivity of over 3 orders of magnitude, improving our understanding of gravity and aiding the development of a new quantum gravity theory; to measure key solar system parameters with increased accuracy, advancing solar physics and our knowledge of the solar system and to measure the time rate of change of the gravitational constant with an order of magnitude improvement and the anomalous Pioneer acceleration, thereby probing dark matter and dark energy gravitationally. It is an international project, with major contributions from Europe and China and is envisaged as the first in a series of ASTROD missions. ASTROD I will consist of one spacecraft carrying a telescope, four lasers, two event timers and a clock. Two-way, two-wavelength laser pulse ranging will be used between the spacecraft in a solar orbit and deep space laser stations on Earth, to achieve the ASTROD I goals. A second mission, ASTROD II is envisaged as a three-spacecraft mission which would test General Relativity to one part per billion, enable detection of solar g-modes, measure the solar Lense-Thirring effect to 10 parts per million, and probe gravitational waves at frequencies below the LISA bandwidth. In the third phase (ASTROD III or Super-ASTROD), larger orbits could be implemented to map the outer solar system and to probe primordial gravitational-waves at frequencies below the ASTROD II bandwidth.

astro-ph↗