arXiv subjects

Andres Castellanos-Gomez

Publications and source records attributed to Andres Castellanos-Gomez.

At least 19 recordsLinked to original sources

arXiv2026

Modular and Cost-effective Scanning Photocurrent Microscopy System for Sub-micron characterization of 2D optoelectronic devices

Scanning photocurrent microscopy (SPCM) is a powerful technique for probing local optoelectronic phenomena in 2D semiconducting devices. However, commercial setups remain costly, complex and often lack flexibility and adaptability. In this work, we present a home-built SPCM platform built around the retrofitting of a conventional metallographic microscope by coupling it with different light sources (single-mode fiber-coupled lasers and multimode fiber-coupled high-power LEDs), a motorized XY stage, a digital camera and an electronic readout module. This system enables simultaneous acquisition of photocurrent and reflection intensity maps, requiring minimal modifications of the microscope. We reached sub-micron spatial resolution and high imaging fidelity by correlating photocurrent maps with reflection maps, optical micrographs and AFM topography data on different devices fabricated with different materials (InSe, MoS2, WSe2, Gr), on different substrates (Si/SiO2, compact disk). This work provides a reliable, accessible and reproducible high-performance SPCM platform that can be easily implemented in most laboratories for microscale optoelectronic characterization of 2D devices.

cond-mat.mtrl-sci↗

arXiv2026

Scalable conformal electronics based on roll-to-roll exfoliated van der Waals semiconductors

Integrating electronic devices onto surfaces with complex topography such as skin, textiles, and biological tissues requires fabrication strategies that combine mechanical conformability with high electronic performance and scalable manufacturing. While two-dimensional (2D) semiconductors are promising materials for such applications, their integration into conformal electronic systems remains challenging because scalable liquid-phase processing typically yields films with limited electronic performance, whereas high-quality CVD materials require complex synthesis and transfer processes. Here we establish a scalable route toward conformal electronics based on semiconducting van der Waals materials by combining high-throughput roll-to-roll mechanical exfoliation with commercially available temporary tattoo and waterslide decal transfer substrates. This approach enables the fabrication of ultrathin MoS2-based electronic devices that can be transferred onto rough and curved surfaces such as skin, synthetic leather, and plant leaves. The resulting devices operate reliably after transfer and exhibit strong electronic and optoelectronic performance, including photodetectors with responsivities up to approximately 3.5 A W$^{-1}$, thermistors with temperature coefficients of resistance from -2 to -3.5% per degree Celsius, and ionic-gel-gated field-effect transistors with mobilities reaching approximately 18 cm$^2$ V$^{-1}$ s$^{-1}$.

cond-mat.mtrl-sci↗

arXiv2026

Tunable Magneto-Excitonic Coupling in Alloyed van der Waals Antiferromagnet

The unique coupling between magnetic order and photo-generated excitons, electron-hole pairs bound by Coulomb interaction, in layered magnetic semiconductors offers a powerful mechanism for controlling light-matter interactions. In the van der Waals antiferromagnet CrSBr, this coupling is exceptionally strong and manifests distinctly between two coexisting excitonic states: the localised, Frenkel-like XA exciton and the more delocalised, Wannier-Mott-like XB exciton, providing a unique playground for the optical control of magnetism. Here, we reveal how chlorine incorporation reshapes the magneto-optical interplay in CrSBr1-xClx by simultaneously modifying its electronic structure, excitonic properties, and magnetic interactions. Combining magneto-optical spectroscopy up to 85 T with state-of-the-art quasiparticle self-consistent GW (QSGW) calculations on alloy supercells, we show that Cl insertion progressively localises the excitonic wavefunctions and drives both states toward a more Frenkel-like regime. This evolution is accompanied by a systematic reduction of the magnetic-field-induced energy renormalisation, most prominently for the XB exciton. Our work connects exciton character directly to magneto-excitonic coupling. Furthermore, it establishes compositional alloying as an effective strategy for engineering the coupling between magnetic and optical properties in van der Waals magnetic semiconductors.

cond-mat.mtrl-sci↗

arXiv2026

Toward Full Autonomous Laboratory Instrumentation Control with Large Language Models

The control of complex laboratory instrumentation often requires significant programming expertise, creating a barrier for researchers lacking computational skills. This work explores the potential of large language models (LLMs), such as ChatGPT, and LLM-based artificial intelligence (AI) agents to enable efficient programming and automation of scientific equipment. Through a case study involving the implementation of a setup that can be used as a single-pixel camera or a scanning photocurrent microscope, we demonstrate how ChatGPT can facilitate the creation of custom scripts for instrumentation control, significantly reducing the technical barrier for experimental customization. Building on this capability, we further illustrate how LLM-assisted tools can be extended into autonomous AI agents capable of independently operating laboratory instruments and iteratively refining control strategies. This approach underscores the transformative role of LLM-based tools and AI agents in democratizing laboratory automation and accelerating scientific progress.

cs.AI↗

arXiv2026

Mechanical Detuning of Exciton-Phonon Resonance in WS2

Controlling resonant Raman scattering in two-dimensional semiconductors typically requires tuning the excitation energy to match excitonic transitions. Here we show that mechanical deformation can achieve the same effect without changing the laser energy, enabling a controlled transition between resonant and non-resonant Raman scattering at fixed excitation. By applying biaxial strain up to 1.3% to WS2, the B exciton is red-shifted by 180 meV. This large excitonic shift leads to a pronounced collapse of the double-resonant 2LA(M) mode under 532 nm excitation, quantitatively described by a resonance model formulated in terms of the B exciton energy. Meanwhile, first-order phonons remain narrow and reversible, confirming elastic deformation and efficient strain transfer. These results establish mechanical strain as an effective knob to control exciton-phonon mediated light-matter interactions. They enable deterministic and reversible tuning of resonance-enhanced Raman scattering and excitonic optical responses in layered semiconductors.

cond-mat.mtrl-sci↗

arXiv2025

Wafer-Scale Films of Two-Dimensional Materials via Roll-to-Roll Mechanical Exfoliation

In this study, we demonstrate an improved version of the roll-to-roll mechanical exfoliation method, incorporating a controlled sliding motion into the exfoliation process to achieve uniform nanosheet films of two-dimensional materials at wafer-scale. This scalable technique enables the fabrication of high-quality films suitable for electronic and optoelectronic applications. We validate the process by fabricating WSe2 phototransistors directly on the exfoliated films, achieving performance metrics comparable to the best reported devices based on electrochemically exfoliated material. The all-dry transfer method employed ensures minimal contamination and preserves the intrinsic properties of the material. This work highlights the potential of high-throughput mechanical exfoliation as a cost-effective and reliable route for large-scale production of 2D material-based devices.

cond-mat.mtrl-sci↗

arXiv2025

Controllable Superconductivity in Suspended van der Waals Materials

Tunable superconductors provide a versatile platform for advancing next-generation quantum technologies. Here, we demonstrate controllable superconductivity in suspended NbSe2 thin layers, achieved through local strain and thermal modulation of the superconducting state. Our results show that suspended NbSe2 structures enable strain modulation of the critical temperature by up to approximately 0.92 K (about 12.5% of the critical temperature) and allow the realization of gate-tunable superconducting critical currents. We further demonstrate configurable hysteretic transport characteristics exhibiting multistability and negative differential resistance, providing easily reconfigurable, spatially dependent superconducting states. These phenomena are well explained by calculations of electron-phonon coupling using density functional theory, together with time-dependent Ginzburg-Landau dynamics coupled to the thermal diffusion equation. Our work provides profound insight into strain and thermal modulation of van der Waals superconductors and opens new opportunities for tunable on-chip superconductor devices, integrated superconducting circuits, and quantum simulators.

cond-mat.supr-con↗

arXiv2025

Strain Engineering of Correlated Charge-Ordered Phases in 1T-TaS2

Strain engineering is a powerful strategy for controlling the structural and electronic properties of two-dimensional materials, particularly in systems hosting charge density wave (CDW) order. In this work, we apply uniaxial tensile and compressive strain to thin 1T-TaS2 flakes using a flexible, device-compatible platform, and systematically investigate the strain-dependent behavior of the nearly commensurate (NC) to incommensurate (IC) CDW phase transition. This transition is driven by Joule heating at room temperature. Electrical transport measurements reveal that both the switching threshold voltage and the resistance of the NC-CDW phase exhibit clear, reversible strain dependence. Furthermore, we identify a quadratic dependence between the strain-induced resistance change and the threshold voltage, confirming that piezoresistive modulation governs the strain-tunability of the phase transition. We demonstrate a room-temperature, electrically-readout strain and displacement sensor with threshold-like response in a programmable window. These results highlight the potential of 1T-TaS2 for on-chip sensing of strain and displacement.

cond-mat.mes-hall↗

arXiv2025

Strain Engineering of Magnetoresistance and Magnetic Anisotropy in CrSBr

Tailoring magnetoresistance and magnetic anisotropy in van der Waals magnetic materials is essential for advancing their integration into technological applications. In this regard, strain engineering has emerged as a powerful and versatile strategy to control magnetism at the two-dimensional (2D) limit. Here, we demonstrate that compressive biaxial strain significantly enhances the magnetoresistance and magnetic anisotropy of few-layer CrSBr flakes. Strain is efficiently transferred to the flakes from the thermal compression of a polymeric substrate upon cooling, as confirmed by temperature-dependent Raman spectroscopy. This strain induces a remarkable increase in the magnetoresistance ratio and in the saturation fields required to align the magnetization of CrSBr along each of its three crystalographic directions, reaching a twofold enhancement along the magnetic easy axis. This enhancement is accompanied by a subtle reduction of the Néel temperature by ~10K. Our experimental results are fully supported by first-principles calculations, which link the observed effects to a strain-driven modification in interlayer exchange coupling and magnetic anisotropy energy. These findings establish strain engineering as a key tool for fine-tuning magnetotransport properties in 2D magnetic semiconductors, paving the way for implementation in spintronics and information storage devices.

cond-mat.mtrl-sci↗

arXiv2025

Enhanced Biaxial Compressive Strain Tuning of 2D semiconductors via Hot Dry Transfer on Polymer Substrates

Strain engineering is an effective tool for tailoring the properties of two-dimensional (2D) materials, especially for tuning quantum phenomena. Among the limited methods available for strain engineering under cryogenic conditions, thermal mismatch with polymeric substrates provides a simple and affordable strategy to induce biaxial compressive strain upon cooling. In this work, we demonstrate the transfer of unprecedentedly large levels of uniform biaxial compressive strain to single-layer WS$_2$ by employing a pre-straining approach prior to cryogenic cooling. Using a hot-dry-transfer method, single-layer WS$_2$ samples were deposited onto thermally expanded polymeric substrates at 100 $^\circ$C. As the substrate cools to room temperature, it contracts, inducing biaxial compressive strain (up to ~0.5%) in the WS$_2$ layer. This pre-strain results in a measurable blueshift in excitonic energies compared to samples transferred at room temperature, which serve as control (not pre-strained) samples. Subsequent cooling of the pre-strained samples from room temperature down to 5 K leads to a remarkable total blueshift of ~200 meV in the exciton energies of single-layer WS$_2$. This energy shift surpasses previously reported values, indicating superior levels of biaxial compressive strain induced by the accumulated substrate contraction of ~1.7%. Moreover, our findings reveal a pronounced temperature dependence in strain transfer efficiency, with gauge factors approaching theoretical limits for ideal strain transfer at 5 K. We attribute this enhanced efficiency to the increased Young's modulus of the polymeric substrate at cryogenic temperatures.

cond-mat.mtrl-sci↗

arXiv2025

Enhanced Strain Transfer and Optoelectronic Performance in MoS2 Devices via Formvar Encapsulation

We systematically investigate the influence of polyvinyl formal (PVFM), commonly known as Formvar, in comparison to polycarbonate (PC) and polymethyl methacrylate (PMMA), as encapsulation materials on the strain performance of MoS2 monolayer and bilayer flakes on flexible polypropylene (PP) substrates. Notably, optical differential reflectance measurements reveal that PVFM and PMMA encapsulation significantly enhances the mechanical and thermal strain gauge factors by approximately 2-fold (up to ~-50 meV/%) and 6-fold (up to ~-1.5 meV/°C), respectively, while PC shows a slightly lower enhancement. Moreover, all three polymers increase the maximum achievable strain from approximately 1.4% to 2.3%. Furthermore, devices fabricated on PP substrates exhibit improved optoelectronic performance when encapsulated with PVFM, including increased and faster photocurrent response and extended device lifetime.

cond-mat.mtrl-sci↗

arXiv2025

Direct laser ablation of 2D material films for fabricating multi-functional flexible and transparent devices

We present a scalable method for direct patterning of graphite and transition metal dichalcogenide (TMD) films on polycarbonate (PC) and other transparent substrates using fiber laser ablation. This process facilitates the fabrication of various functional devices, including strain gauges, supercapacitors, and photodetector arrays, without the need for photolithography or solvents, thereby simplifying device production and enhancing environmental sustainability. Utilizing roll-to-roll mechanical exfoliation, homogeneous nanosheet films are created and then patterned with a laser engraving system. Electrical and optical characterization confirms that the laser-processed films maintain their crystallinity, with no observable damage to the underlying substrate. We demonstrate the scalability of this approach by constructing a WSe2/graphite photodetector array on PC, which exhibits high sensitivity, low noise, and uniform photocurrent response across its active channels. As a proof-of-concept, this array is used as an image sensor to capture light patterns, showcasing its potential for flexible and semi-transparent imaging applications. These findings open up new avenues for incorporating all-van der Waals devices into wearable electronics, optoelectronics, and imaging technologies.

physics.app-ph↗

arXiv2025

Natural layered phlogopite dielectric for ultrathin two-dimensional optoelectronics

The integration of high-dielectric-constant (high-$κ$) materials with two-dimensional (2D) semiconductors is promising to overcome performance limitations and reach their full theoretical potential. Here we show that naturally occurring phlogopite mica, exfoliated into ultrathin flakes, can serve as a robust high-$κ$ dielectric layer for transition metal dichalcogenide-based 2D electronics and optoelectronics. Phlogopite's wide bandgap (~4.8 eV), high dielectric constant (~11), and large breakdown field (10 MVcm$^{-1}$) enable transistors with subthreshold swings down to 100 mVdec$^{-1}$, minimal hysteresis (30-60 mV) and interface trap densities comparable to state-of-the-art oxide dielectrics. Moreover, phototransistors built upon monolayer molybdenum disulfide (MoS$_2$) and phlogopite exhibit responsivities up to 3.3x10$^{4}$ AW$^{-1}$ and detectivities near 10$^{10}$ Jones, surpassing devices based on conventional gate insulators. We further demonstrate the versatility of this natural dielectric by integrating phlogopite/MoS$_2$ heterostructures into NMOS inverters, showcasing robust voltage gains and low-voltage operation. Our findings establish phlogopite as a promising, earth-abundant dielectric for next-generation 2D transistor technologies and high-performance photodetection.

cond-mat.mtrl-sci↗

arXiv2024

Approaching the Intrinsic Properties of Moiré Structures Using Atomic Force Microscopy Ironing

Stacking monolayers of transition metal dichalcogenides (TMDs) has led to the discovery of a plethora of new exotic phenomena, resulting from moiré pattern formation. Due to the atomic thickness and high surface-to-volume ratio of heterostructures, the interfaces play a crucial role. Fluctuations in the interlayer distance affect interlayer coupling and moiré effects. Therefore, to access the intrinsic properties of the TMD stack, it is essential to obtain a clean and uniform interface between the layers. Here, we show that this is achieved by ironing with the tip of an atomic force microscope. This post-stacking procedure dramatically improves the homogeneity of the interfaces, which is reflected in the optical response of the interlayer exciton. We demonstrate that ironing improves the layer coupling, enhancing moiré effects and reducing disorder. This is crucial for the investigation of TMD heterostructure physics, which currently suffers from low reproducibility.

cond-mat.mes-hall↗

arXiv2024

Pencil and Paper Electronics: An Accessible Approach to Teaching Basic Physics Concepts

This teaching article describes a simple and low-cost methodology for studying electrical transport and constructing basic sensor devices using everyday stationery items, including pencils, paper, and a handheld multimeter. The approach is designed for high school and undergraduate teachers and offers an easy-to-implement, hands-on method for teaching fundamental concepts in physical electronics. The materials and experiments outlined in this article are widely accessible and can be easily replicated in various teaching labs, even with limited budgets.

physics.ed-ph↗

arXiv2024

Strong electrostatic control of excitonic features in MoS$_2$ by a free-standing ultrahigh-$κ$ ferroelectric perovskite

We present the electrostatic control of photoluminescence of monolayer MoS$_2$ at room temperature via integration of free-standing BaTiO$_3$ (BTO), a ferroelectric perovskite oxide, layers. We show that the use of BTO leads to highly tunable exciton emission of MoS$_2$ in a minimal range of gate voltages, effectively controlling the neutral excitons to charged excitons (trions) conversion. Due to BTO's ferroelectric polarization-induced doping we observe large peak emission shifts as well as a large and tunable A trion binding energy in the range of 40-100 meV. To further investigate the efficacy of electrostatic control, we compared our measurements with those carried out when the BTO is replaced by a hexagonal boron nitride (hBN) dielectric layer of comparable thickness, confirming BTO's superior gating properties and thus lower power consumption. Additionally, we take advantage of the ferroelectric switching of BTO by fabricating devices where the BTO layer is decoupled from the gate electrode with a SiO$_2$ layer. Choosing to isolate the BTO allows us to induce large remanent behavior of MoS$_2$'s excitonic features, observing hysteretic behavior in the peak energy ratio between A exciton and its trion, as well as hysteretic behavior in the doping-related trion energy shift. This study illustrates the rich physics involved in combining free-standing complex oxide layers with two-dimensional materials.

cond-mat.mtrl-sci↗

arXiv2023

Paper-based Flexible Supercapacitors with drawn van der Waals materials

Two-dimensional (2D) materials are widely used in various applications due to their extraordinary properties. In particular, their electrochemical stability, low electrical resistance, and huge specific surface area make them very interesting active materials for supercapacitors. Herein, flexible, biodegradable, and low-cost supercapacitors are introduced in a very simple way based on hand-drawing pencil traces or -rubbing molybdenum disulfide (MoS2), titanium trisulfide (TiS3) and franckeite traces on the paper. Results demonstrate that pencil-drawn paper has higher capacitance performance (~6.39 F/g) among the suggested electrodes. Interestingly, the introduced MoS2/pencil, TiS3/pencil, and franckeite/pencil drawn paper electrodes reveal dramatic improvements with long cyclic life thanks to the occurrence of synergetic effects and higher available active cites within the heterostructures. Moreover, the assembled symmetric solid-state supercapacitors retain their performance even under applied bending, indicating their excellent potential for wearable/flexible applications.

physics.app-ph↗

arXiv2022

Strongly anisotropic strain-tunability of excitons in exfoliated ZrSe$_3$

We study the effect of uniaxial strain on the band structure of ZrSe$_3$, a semiconducting material with a marked in-plane structural anisotropy. By using a modified 3-point bending test apparatus, thin ZrSe$_3$ flakes were subjected to uniaxial strain along different crystalline orientations monitoring the effect of strain on their optical properties through micro-reflectance spectroscopy. The obtained spectra showed excitonic features that blueshift upon uniaxial tension. This shift is strongly dependent on the direction along which the strain is being applied. When the flakes are strained along the b-axis, the exciton peak shifts at ~ 60-95 meV/%, while along the a-axis, the shift only reaches ~ 0-15 meV/%. Ab initio calculations were conducted to study the influence of uniaxial strain, applied along different crystal directions, on the band structure and reflectance spectra of ZrSe$_3$, exhibiting a remarkable agreement with the experimental results.

cond-mat.mtrl-sci↗