arXiv subjects

Andres Castellanos-Gomez

Publications and source records attributed to Andres Castellanos-Gomez.

At least 91 records · Page 5Linked to original sources

arXiv2017

Electronics and optoelectronics of quasi-one dimensional layered transition metal trichalcogenides

The isolation of graphene and transition metal dichalcongenides has opened a veritable world to a great number of layered materials which can be exfoliated, manipulated, and stacked or combined at will. With continued explorations expanding to include other layered materials with unique attributes, it is becoming clear that no one material will fill all the post-silicon era requirements. Here we review the properties and applications of layered, quasi-one dimensional transition metal trichalcogenides (TMTCs) as novel materials for next generation electronics and optoelectronics. The TMTCs present a unique chain-like structure which gives the materials their quasi-one dimensional properties such as high anisotropy ratios in conductivity and linear dichroism. The range of band gaps spanned by this class of materials (0.2 eV- 2 eV) makes them suitable for a wide variety of applications including field-effect transistors, infrared, visible and ultraviolet photodetectors, and unique applications related to their anisotropic properties which opens another degree of freedom in the development of next generation electronics. In this review we survey the historical development of these remarkable materials with an emphasis on the recent activity generated by the isolation and characterization of atomically thin titanium trisulfide (TiS3).

cond-mat.mtrl-sci↗

arXiv2017

High current density electrical breakdown of TiS3 nanoribbon-based field-effect transistors

The high field transport characteristics of nanostructured transistors based on layered materials are not only important from a device physics perspective but also for possible applications in next generation electronics. With the growing promise of layered materials as replacements to conventional silicon technology, we study here the high current density properties of the layered material titanium trisulfide (TiS3). We observe high breakdown current densities up to 1.7 10^6 A/cm^2 in TiS3 nanoribbon-based field-effect transistors which are among the highest found in semiconducting nanomaterials. Investigating the mechanisms responsible for current breakdown, we perform a thermogravimetric analysis of bulk TiS3 and compare the results with density functional theory (DFT) and Kinetic Monte Carlo calculations. We conclude that oxidation of TiS3 and subsequent desorption of sulfur atoms plays an important role in the electrical breakdown of the material in ambient conditions. Our results show that TiS3 is an attractive material for high power applications and lend insight to the thermal and defect activated mechanisms responsible for electrical breakdown in nanostructured devices.

cond-mat.mes-hall↗

arXiv2017

Approaching ultra-strong coupling in Transmon circuit-QED using a high-impedance resonator

In this experiment, we couple a superconducting Transmon qubit to a high-impedance $645\ Ω$ microwave resonator. Doing so leads to a large qubit-resonator coupling rate $g$, measured through a large vacuum Rabi splitting of $2g\simeq 910$ MHz. The coupling is a significant fraction of the qubit and resonator oscillation frequencies $ω$, placing our system close to the ultra-strong coupling regime ($\bar{g}=g/ω=0.071$ on resonance). Combining this setup with a vacuum-gap Transmon architecture shows the potential of reaching deep into the ultra-strong coupling $\bar{g} \sim 0.45$ with Transmon qubits.

quant-ph↗

arXiv2017

Surfactant-Free Polar-to-Non-Polar-Phase Transfer of Exfoliated MoS2 Two-Dimensional Colloids

Exfoliation of lamellar materials into their corresponding layers represented a breakthrough, due to the outstanding properties arising from the nanometric thickness confinement. Among the cleavage techniques, liquid-phase exfoliation is now on the rise because it is scalable and leads to easy-to-manipulate colloids. However, all appropriate exfoliating solvents exhibit strong polarity, which restrains a lot the scope of feasible functionalization or processing of the resulting flakes. Here we propose to extend this scope, demonstrating that nanosheets exfoliated in a polar medium can be properly dispersed in a non-polar solvent. To that purpose, we prepared suspensions of molybdenum disulfide flakes in isopropanol/water and developed a phase transfer of the nanosheets to chloroform via precipitation and redispersion/centrifugation sequences, without any assisting surfactant. The colloidal stability of the nanosheets in chloroform was found to be governed by their lateral dimensions and, although lower than in polar media, proved to be high enough to open the way to subsequent functionalization or processing of the flakes in non-polar medium.

cond-mat.mes-hall↗

arXiv2017

High Throughput Characterization of Epitaxially Grown Single-Layer MoS2

The growth of single-layer MoS2 with chemical vapor deposition is an established method that can produce large-area and high quality samples. In this article, we investigate the geometrical and optical properties of hundreds of individual single-layer MoS2 crystallites grown on a highly-polished sapphire substrate. Most of the crystallites are oriented along the terraces of the sapphire substrate and have an area comprised between 10 μm2 and 60 μm2. Differential reflectance measurements performed on these crystallites show that the area of the MoS2 crystallites has an influence on the position and broadening of the B exciton while the orientation does not influence the A and B excitons of MoS2. These measurements demonstrate that differential reflectance measurements have the potential to be used to characterize the homogeneity of large area CVD grown samples.

cond-mat.mes-hall↗

arXiv2017

Biaxial strain tuning of the optical properties of single-layer transition metal dichalcogenides

Since their discovery single-layer semiconducting transition metal dichalcogenides have attracted much attention thanks to their outstanding optical and mechanical properties. Strain engineering in these two-dimensional materials aims to tune their bandgap energy and to modify their optoelectronic properties by the application of external strain. In this paper we demonstrate that biaxial strain, both tensile and compressive, can be applied and released in a timescale of a few seconds in a reproducible way on transition metal dichalcogenides monolayers deposited on polymeric substrates. We can control the amount of biaxial strain applied by letting the substrate expand or compress. To do this we change the substrate temperature and choose materials with a large thermal expansion coefficient. After the investigation of the substrate-dependent strain transfer, we performed micro-differential spectroscopy of four transition metal dichalcogenides monolayers (MoS2, MoSe2, WS2, WSe2) under the application of biaxial strain and measured their optical properties. For tensile strain we observe a redshift of the bandgap that reaches a value as large as 95 meV/% in the case of single-layer WS2 deposited on polypropylene. The observed bandgap shifts as a function of substrate extension/compression follow the order MoSe2 < MoS2 < WSe2 < WS2. Theoretical calculations of these four materials under biaxial strain predict the same trend for the material-dependent rates of the shift and reproduce well the features observed in the measured reflectance spectra.

cond-mat.mes-hall↗

arXiv2017

Strain engineering of Schottky barriers in single- and few-layer MoS2 vertical devices

We study the effect of local strain in the electronic transport properties of vertical metal-atomically thin MoS2-metal structures. We use a conductive atomic force microscope tip to apply different load forces to monolayer and few-layer MoS2 crystals deposited onto a conductive indium tin oxide (ITO) substrate while measuring simultaneously the I-V characteristics of the vertical tip/MoS2/ITO structures. The structures show rectifying I-V characteristics, with rectification ratios strongly dependent on the applied load. To understand these results, we compare the experimental I-Vs with a double Schottky barrier model, which is in good agreement with our experimental results and allows us to extract quantitative information about the electronic properties of the tip/MoS2/ITO structures and their dependence on the applied load. Finally, we test the stability of the studied structures using them as mechanically tunable current rectifiers.

cond-mat.mes-hall↗

arXiv2017

Gate Tunable Photovoltaic Effect in MoS2 vertical P-N Homostructures

P-n junctions based on vertically stacked single or few layer transition metal dichalcogenides (TMDCs) have attracted substantial scientific interest. Due to the propensity of TMDCs to show exclusively one type of conductivity, n- or p-type, heterojunctions of different materials are typically fabricated to produce diode-like current rectification and photovoltaic response. Recently, artificial, stable and substitutional doping of MoS2 into n- and p-type has been demonstrated. MoS2 is an interesting material to use for optoelectronic applications due to the potential of low-cost production in large quantities, strong light-matter interactions and chemical stability. Here we report the characterization of the optoelectronic properties of vertical homojunctions made by stacking few-layer flakes of MoS2:Fe (n-type) and MoS2:Nb (p-type). The junctions exhibit a peak external quantum efficiency of 4.7 %, a maximum open circuit voltage of 0.51 V, they are stable in air and their rectification characteristics and photovoltaic response are in excellent agreement to the Shockley diode model. The gate-tunability of the maximum output power, the ideality factor and the shunt resistance indicate that the dark current is dominated by trap-assisted recombination and that the photocurrent collection depends strongly on the spatial extent of the space charge region. We demonstrate a response time faster than 80 ms and highlight the potential to integrate such devices into quasi-transparent and flexible optoelectronics.

cond-mat.mes-hall↗

arXiv2016

Micro-reflectance and transmittance spectroscopy: a versatile and powerful tool to characterize 2D materials

Optical spectroscopy techniques such as differential reflectance and transmittance have proven to be very powerful techniques to study 2D materials. However, a thorough description of the experimental setups needed to carry out these measurements is lacking in the literature. We describe a versatile optical microscope setup to carry out differential reflectance and transmittance spectroscopy in 2D materials with a lateral resolution of ~1 micron in the visible and near-infrared part of the spectrum. We demonstrate the potential of the presented setup to determine the number of layers of 2D materials and to characterize their fundamental optical properties such as excitonic resonances. We illustrate its performance by studying mechanically exfoliated and chemical vapor-deposited transition metal dichalcogenide samples.

cond-mat.mes-hall↗

arXiv2016

Engineering the optoelectronic properties of MoS2 photodetectors through reversible noncovalent functionalization

We present an easy drop-casting based functionalization of MoS2-based photodetectors that results in an enhancement of the photoresponse of about four orders of magnitude, reaching responsivities up to 100 A/W. The functionalization is technologically trivial, air-stable, fully reversible and reproducible, and opens the door to the combination of 2D-materials with molecular dyes for the development of high performance photodetectors.

cond-mat.mtrl-sci↗

arXiv2016

Highly responsive UV-photodetectors based on single electrospun TiO2 nanofibres

In this work we study the optoelectronic properties of individual TiO2 fibres produced through coupled sol-gel and electrospinning, by depositing them onto pre-patterned Ti/Au electrodes on SiO2/Si substrates. Transport measurements in the dark give a conductivity above 2*10^-5 S, which increases up to 8*10^-5 S in vacuum. Photocurrent measurements under UV-irradiation show high sensitivity (responsivity of 90 A/W for 375 nm wavelength) and a response time to illumination of ~ 5 s, which is superior to state-of-the-art TiO2-based UV photodetectors. Both responsivity and response speed are higher in air than in vacuum, due to oxygen adsorbed on the TiO2 surface which traps photoexcited free electrons in the conduction band, thus reducing the recombination processes. The photodetectors are sensitive to light polarization, with an anisotropy ratio of 12%. These results highlight the interesting combination of large surface area and low 1D transport resistance in electrospun TiO2 fibres. The simplicity of the sol-gel/electrospinning synthesis method, combined with a fast response and high responsivity makes them attractive candidates for UV-photodetection in ambient conditions. We anticipate their high (photo) conductance is also relevant for photocatalysis and dye-sensitized solar cells.

cond-mat.mes-hall↗

arXiv2016

Strong quantum confinement effect in the optical properties of ultrathin α-In2Se3

The effect of quantum confinement in the optical absorption spectra of atomically thin α-In2Se3 crystals is studied, observing a huge thickness-dependent shift in the optical band gap of exfoliated α-In2Se3 flakes. The band gap variation reported here is among the largest found in semiconductor crystals and spans a region of the near-UV spectrum uncovered by other 2D semiconductors.

cond-mat.mes-hall↗

arXiv2016

Environmental Effects in Mechanical Properties of Few-layer Black Phosphorus

We report on the mechanical properties of few-layer black phosphorus (BP) nanosheets, in high vacuum and as a function of time of exposure to atmospheric conditions [1]. BP flakes with thicknesses ranging from 4 to 30 nm suspended over circular holes are characterized by nanoindentations using an atomic force microscope tip. From measurements in high vacuum an elastic modulus of 46+/-10 GPa and breaking strength of 2.4+/-1 GPa are estimated. Both magnitudes are independent of the thickness of the flakes. Our results show that the exposure to air has substantial influence in the mechanical response of flakes thinner than 6 nm but small effects on thicker flakes.

cond-mat.mtrl-sci↗

arXiv2016

Thickness dependent interlayer transport in vertical MoS2 Josephson junctions

We report on observations of thickness dependent Josephson coupling and multiple Andreev reflections (MAR) in vertically stacked molybdenum disulfide (MoS2) - molybdenum rhenium (MoRe) Josephson junctions. MoRe, a chemically inert superconductor, allows for oxide free fabrication of high transparency vertical MoS2 devices. Single and bilayer MoS2 junctions display relatively large critical currents (up to 2.5 uA) and the appearance of sub-gap structure given by MAR. In three and four layer thick devices we observe orders of magnitude lower critical currents (sub-nA) and reduced quasiparticle gaps due to proximitized MoS2 layers in contact with MoRe. We anticipate that this device architecture could be easily extended to other 2D materials.

cond-mat.mes-hall↗

arXiv2016

Franckeite: a naturally occurring van der Waals heterostructure

The fabrication of van der Waals heterostructures, artificial materials assembled by individually stacking atomically thin (2D) materials, is one of the most promising directions in 2D materials research. Until now, the most widespread approach to stack 2D layers relies on deterministic placement methods which are cumbersome when fabricating multilayered stacks. Moreover, they tend to suffer from poor control over the lattice orientations and the presence of unwanted adsorbates between the stacked layers. Here, we present a different approach to fabricate ultrathin heterostructures by exfoliation of bulk franckeite which is a naturally occurring and air stable van der Waals heterostructure (composed of alternating SnS2-like and PbS-like layers stacked on top of each other). Presenting both an attractive narrow bandgap (<0.7 eV) and p-type doping, we find that the material can be exfoliated both mechanically and chemically down to few-layer thicknesses. We present extensive theoretical and experimental characterizations of the material's electronic properties and crystal structure, and explore applications for near-infrared photodetectors (exploiting its narrow bandgap) and for p-n junctions based on the stacking of MoS2 (n-doped) and franckeite (p-doped)

cond-mat.mes-hall↗

arXiv2016

Centimeter-scale synthesis of ultrathin layered MoO3 by van der Waals epitaxy

We report on the large-scale synthesis of highly oriented ultrathin MoO3 layers using a simple and low-cost atmospheric pressure by van der Waals epitaxy growth on muscovite mica substrates. By this method we are able to synthetize high quality centimeter-scale MoO3 crystals with thicknesses ranging from 1.4 nm (two layers) up to a few nanometers. The crystals can be easily transferred to an arbitrary substrate (such as SiO2) by a deterministic transfer method and extensively characterized to demonstrate the high quality of the resulting crystal. We also study the electronic band structure of the material by density functional theory calculations. Interestingly, the calculations demonstrate that bulk MoO3 has a rather weak electronic interlayer interaction and thus it presents a monolayer-like band structure. Finally, we demonstrate the potential of this synthesis method for optoelectronic applications by fabricating large-area field-effect devices (10 micrometers by 110 micrometers in lateral dimensions), finding responsivities of 30 mA/W for a laser power density of 13 mW/cm2 in the UV region of the spectrum and also as an electron acceptor in a MoS2-based field-effect transistor.

cond-mat.mes-hall↗

arXiv2016

Strong modulation of optical properties in black phosphorus through strain-engineered rippling

Controlling the bandgap through local-strain engineering is an exciting avenue for tailoring optoelectronic materials. Two-dimensional crystals are particularly suited for this purpose because they can withstand unprecedented non-homogeneous deformations before rupture: one can literally bend them and fold them up almost like a piece of paper. Here, we study multi-layer black phosphorus sheets subjected to periodic stress to modulate their optoelectronic properties. We find a remarkable shift of the optical absorption band-edge of up to ~0.7 eV between the regions under tensile and compressive stress, greatly exceeding the strain tunability reported for transition metal dichalcogenides. This observation is supported by theoretical models which also predict that this periodic stress modulation can yield to quantum confinement of carriers at low temperatures. The possibility of generating large strain-induced variations in the local density of charge carriers opens the door for a variety of applications including photovoltaics, quantum optics and two-dimensional optoelectronic devices.

cond-mat.mes-hall↗

arXiv2016

Why all the fuss about 2D semiconductors?

Graphene is no longer alone; a family of atomically thin 2D semiconductors has emerged. Optoelectronics and photonics applications are in their experimental infancy but the future holds much promise.

cond-mat.mes-hall↗