arXiv subjects

Andres Castellanos-Gomez

Publications and source records attributed to Andres Castellanos-Gomez.

143 records · Page 8Linked to original sources

arXiv2012

A simple strobe to study high-order harmonics and multifrequency oscillations in mechanical resonators

A simple strobe setup with potential to study higher-order eigenmodes and multifrequency oscillations in micromechanical resonators is described. It requires standard equipment, commonly found in many laboratories, and it can thus be employed for public demonstrations of mechanical resonances. Moreover, the work presented here can be used by undergraduate students and/or teachers to prepare practical works in laboratory courses at physics or engineering universities. The dynamics of a micromachined cantilever is analysed as an example. In fact, using our stroboscopic setup, the first and the second flexural eigenmodes as well as a multifrequency oscillation composed by a superposition of both modes have been successfully filmed with a conventional optical microscope equipped with a digital camera.

physics.ins-det↗

arXiv2012

Highly reproducible low temperature scanning tunnelling microscopy and spectroscopy with in situ prepared tips

An in situ tip preparation procedure compatible with ultra-low temperature and high magnetic field scanning tunneling microscopes is presented. This procedure does not require additional preparation techniques such as thermal annealing or ion milling. It relies on the local electric-field-induced deposition of material from the tip onto the studied surface. Subsequently, repeated indentations are performed onto the sputtered cluster to mechanically anneal the tip apex and thus to ensure the stability of the tip. The efficiency of this method is confirmed by comparing the topography and spectroscopy data acquired with either unprepared or in situ prepared tips on epitaxial graphene grown on Ru (0001). We demonstrate that the use of in situ prepared tips increases the stability of the scanning tunneling images and the reproducibility of the spectroscopic measurements.

cond-mat.mes-hall↗

arXiv2012

Mechanical properties of freely suspended atomically thin dielectric layers of mica

We have studied the elastic deformation of freely suspended atomically thin sheets of muscovite mica, a widely used electrical insulator in its bulk form. Using an atomic force microscope, we carried out bending test experiments to determine the Young's modulus and the initial pre-tension of mica nanosheets with thicknesses ranging from 14 layers down to just one bilayer. We found that their Young's modulus is high (190 GPa), in agreement with the bulk value, which indicates that the exfoliation procedure employed to fabricate these nanolayers does not introduce a noticeable amount of defects. Additionally, ultrathin mica shows low pre-strain and can withstand reversible deformations up to tens of nanometers without breaking. The low pre-tension and high Young's modulus and breaking force found in these ultrathin mica layers demonstrates their prospective use as a complement for graphene in applications requiring flexible insulating materials or as reinforcement in nanocomposites.

cond-mat.mtrl-sci↗

arXiv2012

Strong and tunable mode coupling in carbon nanotube resonators

The non-linear interaction between two mechanical resonances of the same freely suspended carbon nanotube resonator is studied. We find that in the Coulomb blockade regime, the non-linear modal interaction is dominated by single-electron-tunneling processes, and that the mode-coupling parameter can be tuned with the gate voltage, allowing both mode softening and mode stiffening behavior. This is in striking contrast to tension-induced mode coupling in strings, where the coupling parameter is positive and gives rise to a stiffening of the mode. The strength of the mode coupling in carbon nanotubes in the Coulomb blockade regime is observed to be six orders of magnitude larger than the mechanical mode coupling in micromechanical resonators.

cond-mat.mes-hall↗

arXiv2012

Laser-thinning of MoS2: on demand generation of a single-layer semiconductor

Single-layer MoS2 is an attractive semiconducting analogue of graphene that combines high mechanical flexibility with a large direct bandgap of 1.8 eV. On the other hand, bulk MoS2 is an indirect bandgap semiconductor similar to silicon, with a gap of 1.2 eV, and therefore deterministic preparation of single MoS2 layers is a crucial step towards exploiting the large direct bandgap of monolayer MoS2 in electronic, optoelectronic, and photovoltaic applications. Although mechanical and chemical exfoliation methods can be used to obtain high quality MoS2 single-layers, the lack of control in the thickness, shape, size, and position of the flakes limits their usefulness. Here we present a technique for controllably thinning multilayered MoS2 down to a single-layer two-dimensional crystal using a laser. We generate single layers in arbitrary shapes and patterns with feature sizes down to 200 nm, and show that the resulting two-dimensional crystals have optical and electronic properties comparable to that of pristine exfoliated MoS2 single layers.

cond-mat.mes-hall↗

arXiv2012

Carbon-fiber tips for scanning probe microscopes and molecular electronics experiments

We fabricate and characterize carbon-fiber tips for their use in combined scanning tunneling and force microscopy based on piezoelectric quartz tuning fork force sensors. An electrochemical fabrication procedure to etch the tips is used to yield reproducible sub-100-nm apex. We also study electron transport through single-molecule junctions formed by a single octanethiol molecule bonded by the thiol anchoring group to a gold electrode and linked to a carbon tip by the methyl group. We observe the presence of conductance plateaus during the stretching of the molecular bridge, which is the signature of the formation of a molecular junction.

cond-mat.mes-hall↗

arXiv2012

Reversible hydrogenation and band gap opening of graphene and graphite surfaces probed by scanning tunneling spectroscopy

The effect of hydrogenation on the topography and the electronic properties of graphene and graphite surfaces are studied by scanning tunneling microscopy and spectroscopy. The surfaces are chemically modified using Ar/H2 plasma. Analyzing thousands of scanning tunneling spectroscopy measurements we determine that the hydrogen chemisorption on the surface of graphite/graphene opens on average an energy band gap of 0.4 eV around the Fermi level. We find that although the plasma treatment modifies the surface topography in a non-reversible way, the change in the electronic properties can be reversed by a moderate thermal annealing and the samples can be hydrogenated again yielding a similar, but slightly reduced, semiconducting behavior after the second hydrogenation.

cond-mat.mes-hall↗

arXiv2012

Mechanical properties of freely suspended semiconducting graphene-like layers based on MoS2

We fabricate freely suspended nanosheets of MoS2 which are characterized by quantitative optical microscopy and high resolution friction force microscopy. We study the elastic deformation of freely suspended nanosheets of MoS2 using an atomic force microscope. The Young's modulus and the initial pre-tension of the nanosheets are determined by performing a nanoscopic version of a bending test experiment. MoS2 sheets show high elasticity and an extremely high Young's modulus (0.30 TPa, 50% larger than steel). These results make them a potential alternative to graphene in applications requiring flexible semiconductor materials.

cond-mat.mes-hall↗

arXiv2012

Calibration of piezoelectric positioning actuators using a reference voltage-to-displacement transducer based on quartz tuning forks

We use a piezoelectric quartz tuning fork to calibrate the displacement of ceramic piezoelectric scanners which are widely employed in scanning probe microscopy. We measure the static piezoelectric response of a quartz tuning fork and find it to be highly linear, non-hysteretic and with negligible creep. These performance characteristics, close to those of an ideal transducer, make quartz transducers superior to ceramic piezoelectric actuators. Furthermore, quartz actuators in the form of a tuning fork have the advantage of yielding static displacements comparable to those of local probe microscope scanners. We use the static displacement of a quartz tuning fork as a reference to calibrate the three axis displacement of a ceramic piezoelectric scanner. Although this calibration technique is a non-traceable method, it can be more versatile than using calibration grids because it enables to characterize the linear and non-linear response of a piezoelectric scanner in a broad range of displacements, spanning from a fraction of a nanometer to hundreds of nanometers. In addition, the creep and the speed dependent piezoelectric response of ceramic scanners can be studied in detail.

physics.ins-det↗

arXiv2012

Elastic properties of freely suspended MoS2 nanosheets

We study the elastic deformation of few layers (5 to 25) thick freely suspended MoS2 nanosheets by means of a nanoscopic version of a bending test experiment, carried out with the tip of an atomic force microscope. The Young's modulus of these nanosheets is extremely high (E = 0.33 TPa), comparable to that of graphene oxide, and the deflections are reversible up to tens of nanometers.

cond-mat.mes-hall↗

arXiv2011

Spatially resolved electronic inhomogeneities of graphene due to subsurface charges

We probe the local inhomogeneities in the electronic properties of exfoliated graphene due to the presence of charged impurities in the SiO2 substrate using a combined scanning tunneling and electrostatic force microscope. Contact potential difference measurements using electrostatic force microscopy permit us to obtain the average charge density but it does not provide enough resolution to identify individual charges. We find that the tunneling current decay constant, which is related to the local tunneling barrier height, enables one to probe the electronic properties of graphene distorted at the nanometer scale by individual charged impurities. We observe that such inhomogeneities do not show long range ordering and their surface density obtained by direct counting is consistent with the value obtained by macroscopic charge density measurements. These microscopic perturbations of the carrier density significantly alter the electronic properties of graphene, and their characterization is essential for improving the performance of graphene based devices.

cond-mat.mes-hall↗

arXiv2011

Carbon tips as electrodes for single-molecule junctions

We study electron transport through single-molecule junctions formed by an octanethiol molecule bonded with the thiol anchoring group to a gold electrode and the opposing methyl endgroup to a carbon tip. Using the scanning tunneling microscope based break junction technique, we measure the electrical conductance of such molecular junctions. We observe the presence of well-defined conductance plateaus during the stretching of the molecular bridge, which is the signature of the formation of a molecular junction.

cond-mat.mes-hall↗

arXiv2011

Atomically thin mica flakes and their application as ultrathin insulating substrates for graphene

We show that it is possible to deposit, by mechanical exfoliation on SiO2/Si wafers, atomically thin mica flakes down to a single monolayer thickness. The optical contrast of these mica flakes on top of a SiO2/Si substrate, which depends on their thickness, the illumination wavelength and the SiO2 substrate thickness, can be quantitatively accounted for by a Fresnel law based model. The preparation of atomically thin insulating crystalline sheets will enable the fabrication of ultrathin defect-free insulating substrates, dielectric barriers or planar electron tunneling junctions. Additionally, we show that few-layer graphene flakes can be deposited on top of a previously transferred mica flake. Our transfer method relies on viscoelastic stamps, as those used for soft lithography. A Raman spectroscopy study shows that such an all-dry deposition technique yields cleaner and higher quality flakes than conventional wet-transfer procedures based on lithographic resists.

cond-mat.mes-hall↗

arXiv2011

Force-gradient-induced mechanical dissipation of quartz tuning fork force sensors used in atomic force microscopy

We have studied the dynamics of quartz tuning fork resonators used in atomic force microscopy taking into account mechanical energy dissipation through the attachment of the tuning fork base. We find that the tuning fork resonator quality factor changes even for the case of a purely elastic sensor-sample interaction. This is due to the effective mechanical imbalance of the tuning fork prongs induced by the sensor-sample force gradient which in turn has an impact on the dissipation through the attachment of the resonator base. This effect may yield a measured dissipation signal that can be different to the one exclusively related to the dissipation between the sensor and the sample. We also find that there is a second order term in addition to the linear relationship between the sensor-sample force gradient and the resonance frequency shift of the tuning fork that is significant even for force gradients usually present in atomic force microscopy which are in the range of tens of N/m.

cond-mat.mes-hall↗

arXiv2010

Optical identification of atomically thin dichalcogenide crystals

We present a systematic study of the optical contrast of diselenide (NbSe2) and molybdenum disulphide (MoS2) flakes deposited onto Si wafers with a thermally grown SiO2 layer. We measure the optical contrast of flakes whose thickness ranges from 200 layers down to a monolayer using different illumination wavelengths in the visible spectrum. The refractive index of these thin crystals has been obtained from the measured optical contrast dependence on the flake thickness by using a simple model based on the Fresnel law. With the refractive index of these NbSe2 and MoS2 crystallites, the optical microscopy data can be quantitatively analyzed to determine the thickness of the flakes in a fast and non-destructive way.

cond-mat.mes-hall↗

arXiv2010

Dynamics of quartz tuning fork force sensors used in scanning probe microscopy

We have performed an experimental characterization of the dynamics of oscillating quartz tuning forks which are being increasingly used in scanning probe microscopy as force sensors. We show that tuning forks can be described as a system of coupled oscillators. Nevertheless, this description requires the knowledge of the elastic coupling constant between the prongs of the tuning fork, which has not yet been measured. Therefore tuning forks have been usually described within the single oscillator or the weakly coupled oscillators approximation that neglects the coupling between the prongs. We propose three different procedures to measure the elastic coupling constant: an opto-mechanical method, a variation of the Cleveland method and a thermal noise based method. We find that the coupling between the quartz tuning fork prongs has a strong influence on the dynamics and the measured motion is in remarkable agreement with a simple model of coupled harmonic oscillators. The precise determination of the elastic coupling between the prongs of a tuning fork allows to obtain a quantitative relation between the resonance frequency shift and the force gradient acting at the free end of a tuning fork prong.

cond-mat.mes-hall↗

arXiv2010

Carbon fibre tips for scanning probe microscopy based on quartz tuning fork force sensors

We report the fabrication and the characterization of carbon fibre tips for their use in combined scanning tunnelling and force microscopy based on piezoelectric quartz tuning fork force sensors. We find that the use of carbon fibre tips results in a minimum impact on the dynamics of quartz tuning fork force sensors yielding a high quality factor and consequently a high force gradient sensitivity. This high force sensitivity in combination with high electrical conductivity and oxidation resistance of carbon fibre tips make them very convenient for combined and simultaneous scanning tunnelling microscopy and atomic force microscopy measurements. Interestingly, these tips are quite robust against occasionally occurring tip crashes. An electrochemical fabrication procedure to etch the tips is presented that produces a sub-100 nm apex radius in a reproducible way which can yield high resolution images.

cond-mat.mes-hall↗