arXiv subjects

Andres Ortega-Guerrero

Publications and source records attributed to Andres Ortega-Guerrero.

8 recordsLinked to original sources

arXiv2026

Ultra-high vacuum Raman platform for in situ characterization of graphene nanoribbons

Atomically precise graphene nanoribbons (GNRs) exhibit tunable electronic and magnetic properties governed by edge topology and finite-size effects, which make them versatile platforms for next-generation electronic and spintronic applications. However, the unpaired pi-electrons responsible for their magnetic properties simultaneously make them highly susceptible to chemical degradation under ambient conditions. This intrinsic reactivity poses a central experimental challenge: accessing vibrational and electronic signatures of air-sensitive GNRs during synthesis and under controlled environments without breaking vacuum. Once the material has been exposed to air, standard characterization techniques would probe oxidized or chemically modified species rather than the pristine form. Here, we overcome this limitation by developing a home-built ultra-high vacuum (UHV) Raman platform designed to preserve sample integrity by preventing air exposure and to enable in situ investigation of material properties. The portable Raman vacuum suitcase (RVS) integrates temperature control and precise gas dosing, allowing direct monitoring of growth kinetics, lattice dynamics, and reactive-edge responses under well-defined thermal and chemical environments. Using this platform, we monitor the on-surface synthesis of 7- and 9-atom-wide armchair GNRs (7- and 9-AGNRs), quantify the evolution of 7-AGNR Raman modes over a wide temperature range (162-748 K), and resolve chemical changes upon controlled O2 exposure that are consistent with oxidation at the reactive zigzag sites. These results establish UHV Raman spectroscopy with the RVS as a route to accessing the intrinsic vibrational signatures of low-dimensional quantum materials under controlled environments.

cond-mat.mtrl-sci↗

arXiv2026

Accelerating discovery across scientific disciplines through reproducible workflows with AiiDAlab

With ever-increasing computational capabilities, robust and automated research workflows have become essential for orchestrating large numbers of interdependent simulations. However, significant technical expertise is still required to configure execution environments, define calculation inputs, interpret outputs, and manage the complexity of parallel code execution on remote machines. To address these challenges, we developed AiiDAlab, a Jupyter-based web platform powered by the AiiDA computational infrastructure that provides a framework for managing and automating computational workflows while ensuring reproducibility through full provenance tracking. Through a collection of open-source user-friendly applications, AiiDAlab enables scientists to set up, execute, and analyze complex computational workflows without interacting directly with the underlying technical details, allowing them to focus on their research questions. In this paper, we discuss how AiiDAlab has matured over the past few years, expanding beyond computational materials science and its AiiDA origins. We present recent developments towards integrating with electronic laboratory notebooks (ELNs) for FAIR-compliant data management, adoption in large-scale facilities for secure access to experimental data and analytical tools, and applications in educational settings. Together with community-driven efforts to simplify onboarding, improve access to computational resources, and support large-scale data workflows, these advancements position AiiDAlab as a powerful platform for accelerating scientific discovery and fostering collaboration across disciplines.

cs.DC↗

arXiv2025

The multiconfigurational ground state of a diradicaloid characterized at the atomic scale

We report the tip-induced generation and scanning probe characterization of a singlet diradicaloid, consisting of two phenalenyl units connected by an sp-hybridized C$_{4}$ chain, on an ultrathin insulating NaCl surface. The bond-order contrast along the C$_{4}$ chain measured by atomic force microscopy and mapping of charge-state transitions by scanning tunneling microscopy, in conjunction with multiconfigurational calculations, reveal that the molecule exhibits a many-body ground state. Our study experimentally demonstrates the manifestation of strong electronic correlations in the geometric and electronic structures of a single molecule.

cond-mat.mes-hall↗

arXiv2025

Making atomistic materials calculations accessible with the AiiDAlab Quantum ESPRESSO app

Despite the wide availability of density functional theory (DFT) codes, their adoption by the broader materials science community remains limited due to challenges such as software installation, input preparation, high-performance computing setup, and output analysis. To overcome these barriers, we introduce the Quantum ESPRESSO app, an intuitive, web-based platform built on AiiDAlab that integrates user-friendly graphical interfaces with automated DFT workflows. The app employs a modular Input-Process-Output model and a plugin-based architecture, providing predefined computational protocols, automated error handling, and interactive results visualization. We demonstrate the app's capabilities through plugins for electronic band structures, projected density of states, phonon, infrared/Raman, X-ray and muon spectroscopies, Hubbard parameters (DFT+$U$+$V$), Wannier functions, and post-processing tools. By extending the FAIR principles to simulations, workflows, and analyses, the app enhances the accessibility and reproducibility of advanced DFT calculations and provides a general template to interface with other first-principles calculation codes.

cond-mat.mtrl-sci↗

arXiv2025

BaZrS$_\text{3}$ Lights Up: The Interplay of Electrons, Photons, and Phonons in Strongly Luminescent Single Crystals

Chalcogenide perovskites have emerged as a promising class of materials for the next generation of optoelectronic applications, with BaZrS$_\text{3}$ attracting significant attention due to its wide bandgap, earth-abundant composition, and thermal and chemical stability. However, previous studies have consistently reported weak and ambiguous photoluminescence (PL), regardless of synthesis method, raising questions about the intrinsic optoelectronic quality of this compound. In this work, we demonstrate strong, band-to-band-dominated PL at room temperature in high-quality BaZrS$_\text{3}$ single crystals, with a PL quantum yield of $\sim$0.005\%. Despite the narrow, single-component PL emission band, time-resolved PL measurements reveal a carrier lifetime of $1.0\pm0.2$ ns. To understand the origin of the strong PL and short carrier lifetime, we perform multiwavelength excitation and polarization-dependent Raman measurements, supported by first-principles lattice dynamics calculations. We identify all 23 theoretically predicted Raman-active modes and their symmetries, providing a comprehensive reference for future studies. Our results indicate that phonon-assisted carrier decay and nontrivial electron-phonon interactions contribute to the short carrier lifetimes, as evidenced by Raman spectroscopy and DFT calculations. Further studies on compositional variations or partial cation/anion substitutions could mitigate electron-phonon coupling and enhance carrier lifetimes. By establishing a detailed reference for the intrinsic vibrational and optoelectronic properties of BaZrS$_\text{3}$, this work paves the way for further advancements in chalcogenide perovskites for energy and optoelectronic technologies.

cond-mat.mtrl-sci↗

arXiv2024

Advancing single-atom catalysts: engineered metal-organic platforms on surfaces

Recent advances in nanomaterials have pushed the boundaries of nanoscale fabrication to the limit of single atoms (SAs), particularly in heterogeneous catalysis. Single atom catalysts (SACs), comprising minute amounts of transition metals dispersed on inert substrates, have emerged as prominent materials in this domain. However, overcoming the tendency of these SAs to cluster beyond cryogenic temperatures and precisely arranging them on surfaces pose significant challenges. Employing organic templates for orchestrating and modulating the activity of single atoms holds promise. Here, we introduce a novel single atom platform (SAP) wherein atoms are firmly anchored to specific coordination sites distributed along carbon-based polymers, synthesized via on-surface synthesis (OSS). These SAPs exhibit atomiclevel structural precision and stability, even at elevated temperatures. The asymmetry in the electronic states at the active sites anticipates the enhanced reactivity of these precisely defined reactive centers. Upon exposure to CO and CO2 gases at low temperatures, the SAP demonstrates excellent trapping capabilities. Fine-tuning the structure and properties of the coordination sites offers unparalleled flexibility in tailoring functionalities, thus opening avenues for previously untapped potential in catalytic applications.

cond-mat.mtrl-sci↗

arXiv2024

Conformational tuning of magnetic interactions in coupled nanographenes

Phenalenyl (C$_{13}$H$_9$) is an open-shell spin-$1/2$ nanographene. Using scanning tunneling microscopy (STM) inelastic electron tunneling spectroscopy (IETS), covalently-bonded phenalenyl dimers have been shown to feature conductance steps associated with singlet-triplet excitations of a spin-$1/2$ dimer with antiferromagnetic exchange. Here, we address the possibility of tuning the magnitude of the exchange interactions by varying the dihedral angle between the two molecules within a dimer. Theoretical methods, ranging from density functional theory calculations to many-body model Hamiltonians solved within different levels of approximation, are used to explain STM-IETS measurements of twisted phenalenyl dimers on a h-BN/Rh(111) surface. By means of first-principles calculations, we also propose strategies to induce sizable twist angles in surface-adsorbed phenalenyl dimers via functional groups, including a photoswitchable scheme. This work paves the way toward tuning magnetic couplings in carbon-based spin chains and two-dimensional lattices.

cond-mat.mes-hall↗

arXiv2024

Layer-Dependent Charge State Lifetime of Single Se Vacancies in WSe$_2$

Defect engineering in two-dimensional semiconductors has been exploited to tune the optoelectronic properties and introduce new quantum states in the band gap. Chalcogen vacancies in transition metal dichalcogenides in particular have been found to strongly impact charge carrier concentration and mobility in 2D transistors as well as feature sub-gap emission and single-photon response. In this letter, we investigate the layer-dependent charge state lifetime of Se vacancies in WSe$_2$. In one monolayer WSe$_2$, we observe ultrafast charge transfer from the lowest unoccupied orbital of the top Se vacancy to the graphene substrate within (1.0 $\pm$ 0.2) ps measured via the current saturation in scanning tunneling approach curves. For Se vacancies decoupled by TMD multilayers, we find a sub-exponential increase of the charge lifetime from (62 $\pm$ 14) ps in bilayer to few nanoseconds in four-layer WSe$_2$, alongside a reduction of the defect state binding energy. Additionally, we attribute the continuous suppression and energy shift of the dI/dV in-gap defect state resonances at very close tip--sample distances to a current saturation effect. Our results provide a key measure of the layer-dependent charge transfer rate of chalcogen vacancies in TMDs.

cond-mat.mes-hall↗