arXiv subjects

Andrew Bechter

Publications and source records attributed to Andrew Bechter.

14 recordsLinked to original sources

arXiv2026

Commissioning and on-sky performance verification of iLocater

iLocater is a high-resolution near-infrared extreme precision radial velocity (EPRV) spectrograph that was deployed to the Large Binocular Telescope (LBT) in June 2026. iLocater operates over $\lambda=966-1312$ nm with a median resolving power of $R=205,000$ as measured in the laboratory. We present the commissioning and initial on-sky verification program using solar and night-time observations at the LBT. First light was achieved on 27 June 2026, and nearly 150 on-sky spectra have now been recorded. Observations include single stars ranging in spectral type from B5 to M6. iLocater uses the LBT AO system, and we have demonstrated its ability to obtain spatially resolved spectra of close ($\theta < 1''$) binary stars.

astro-ph.IM↗

arXiv2026

Laboratory characterization of iLocater

iLocater is a diffraction-limited, fiber-fed spectrograph designed for the Large Binocular Telescope (LBT), which targets high-precision radial velocity measurements in the near-infrared. Prior to deployment, comprehensive laboratory characterization was essential to validate instrument performance and inform alignment strategies. This paper presents results from four key areas of lab characterization: (1) adjustment and optimization of detector orientation to optimize spectrum alignment with the detector pixel grid across the focal plane; (2) the design and installation of a LED illumination source to enable high-fidelity flat-fields; (3) a model-based focusing methodology using OpticStudio image simulations to optimize the optical alignment of the spectrograph; and (4) assessment of instrument mechanical and optical stability under laboratory conditions. Together, these efforts established baseline performance metrics and demonstrated instrument readiness for delivery and on-sky commissioning.

astro-ph.IM↗

arXiv2024

Little iLocater: paving the way for iLocater

Diffraction-limited radial velocity instruments offer a pathway towards improved precision and stability, and the exploration of new parameter spaces at high spatial and spectral resolution. However, achieving the necessary performance requires careful instrument design and considerable on-sky testing. We describe the design and construction of ``Little iLocater'' (Lili), a compact spectrograph that has been used to validate the performance of the front-end fibre-injection system of the iLocater spectrograph. We present the design, assembly, and performance using on-sky data obtained at the Large Binocular Telescope (LBT), including extraction of spectra from standard stars, testing of the atmospheric dispersion corrector to elevations of 40 degrees, and spatially resolved spectra from close companion systems. These results show the front-end fibre-injection system is performing as expected and is indicative of iLocater's capabilities once installed at the LBT.

astro-ph.IM↗

arXiv2022

The final design of the iLocater spectrograph: An optimized architecture for diffraction-limited EPRV instruments

iLocater is a near-infrared, extremely precise radial velocity (EPRV) spectrograph under construction for the dual 8.4 m diameter Large Binocular Telescope (LBT). The instrument will undertake precision radial velocity studies of Earth-like planets orbiting low-mass stars. Operating in the diffraction-limited regime, iLocater uses adaptive optics to efficiently inject starlight directly into single-mode fibers that illuminate a high spectral resolution (R=190,500 median), cryogenic, diffraction-limited spectrograph. To maximize performance, the spectrograph uses a new design strategy for EPRV instruments, combining intrinsically stable materials for its optomechanical fabrication with precision optical fabrication. This novel combination will enable unique EPRV capabilities for exoplanet and astrophysics studies of the solar neighborhood. We present the final optical and mechanical designs of the spectrograph system. Ensuring the as-built spectrograph achieves its designed spectral resolution and diffraction-limited performance has required careful control of the end-to-end system wavefront error (WFE) budget. We discuss the efforts undertaken to achieve this goal including minimizing residual WFE in the optical design, assessing diffraction grating WFE performance, optimizing material choices, and requiring precision optical design and fabrication. Our goal is to deliver diffraction-limited performance across the full spectral format, which, combined with intrinsic thermal stability requirements for EPRV science, has driven the selection of silicon optics and Invar optomechanics. The system performance is further optimized using precision (sub-mK) thermal control. This set of design features will allow iLocater to achieve sub-m/s radial velocity precision in the near-infrared, and to serve as the first optimized diffraction-limited spectrograph for EPRV science.

astro-ph.IM↗

arXiv2021

On-sky results for the novel integrated micro-lens ring tip-tilt sensor

We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with the iLocater acquisition camera at the Large Binocular Telescope in November 2019. The limit on the maximum achieved root mean square reconstruction accuracy was found to be 0.19 $\lambda$/D in both tip and tilt, of which approximately 50% of the power originates at frequencies below 10 Hz. We show the reconstruction accuracy is highly dependent on the estimated Strehl ratio and simulations support the assumption that residual adaptive optics aberrations are the main limit to the reconstruction accuracy. We conclude that this sensor is ideally suited to remove post-adaptive optics non-common path tip tilt residuals. We discuss the next steps for the concept development, including optimizations of the lens and fiber, tuning of the correction algorithm and selection of optimal science cases.

astro-ph.IM↗

arXiv2020

Final Design and On-Sky Testing of the iLocater SX Acquisition Camera: Broadband Single-Mode Fiber Coupling

Enabling efficient injection of light into single-mode fibers (SMFs) is a key requirement in realizing diffraction-limited astronomical spectroscopy on ground-based telescopes. SMF-fed spectrographs, facilitated by the use of adaptive optics (AO), offer distinct advantages over comparable seeing-limited designs, including higher spectral resolution within a compact and stable instrument volume, and a telescope independent spectrograph design. iLocater is an extremely precise radial velocity (EPRV) spectrograph being built for the Large Binocular Telescope (LBT). We have designed and built the front-end fiber injection system, or acquisition camera, for the SX (left) primary mirror of the LBT. The instrument was installed in 2019 and underwent on-sky commissioning and performance assessment. In this paper, we present the instrument requirements, acquisition camera design, as well as results from first-light measurements. Broadband single-mode fiber coupling in excess of 35% (absolute) in the near-infrared (0.97-1.31{\mu}m) was achieved across a range of target magnitudes, spectral types, and observing conditions. Successful demonstration of on-sky performance represents both a major milestone in the development of iLocater and in making efficient ground-based SMF-fed astronomical instruments a reality.

astro-ph.IM↗

arXiv2020

EarthFinder Probe Mission Concept Study: Characterizing nearby stellar exoplanet systems with Earth-mass analogs for future direct imaging

EarthFinder is a NASA Astrophysics Probe mission concept selected for study as input to the 2020 Astrophysics National Academies Decadal Survey. The EarthFinder concept is based on a dramatic shift in our understanding of how PRV measurements should be made. We propose a new paradigm which brings the high precision, high cadence domain of transit photometry as demonstrated by Kepler and TESS to the challenges of PRV measurements at the cm/s level. This new paradigm takes advantage of: 1) broad wavelength coverage from the UV to NIR which is only possible from space to minimize the effects of stellar activity; 2) extremely compact, highly stable, highly efficient spectrometers (R>150,000) which require the diffraction-limited imaging possible only from space over a broad wavelength range; 3) the revolution in laser-based wavelength standards to ensure cm/s precision over many years; 4) a high cadence observing program which minimizes sampling-induced period aliases; 5) exploiting the absolute flux stability from space for continuum normalization for unprecedented line-by-line analysis not possible from the ground; and 6) focusing on the bright stars which will be the targets of future imaging missions so that EarthFinder can use a ~1.5 m telescope.

astro-ph.IM↗

arXiv2019

Focal Plane Tip-Tilt Sensing for Improved Single-Mode Fiber Coupling using a 3D-printed Microlens-Ring

Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to couple light into single-mode fibers (SMFs). However, due to their small size, efficient coupling is very sensitive to the quality of the fiber alignment, beam drifts and higher-frequency tip-tilt aberrations caused by telescope mechanics and vibrations. These residual aberrations are not always sensed and corrected by the AO system, leading to unacceptable losses. This is particularly severe for the Extremely Large Telescopes, where their huge structure will mean vibrations increase and optimal AO solutions are even more difficult to implement. We have created a focal plane sensor to correct for residual aberrations by surrounding the SMF with six Multi-mode fibers (MMFs). On each of the MMFs sits a printed freeform lens, making up a six-element micro-lens ring to refract the light into these surrounding MMFs and thus minimizing light loss in the gap between the fiber cores. This means when the beam is near diffraction limited and centered almost all light couples to the SMF. When the beam is misaligned, it couples to the surrounding cores, which are read out by a detector and processed by the DARC software driving a tip-tilt mirror. Currently we are aiming to detect and correct only tip-tilt aberrations. However, choosing to surround the central fiber with six sensing locations potentially allows us to investigate higher order correction modes. Here we present the design and performance our prototype system. This has been designed for use with the iLocater fiber injection system at the LBT and can easily be scaled to larger telescopes. We present test results from the KOOL laboratory and initial integration with the iLocater instrument.

astro-ph.IM↗

arXiv2019

The need for single-mode fiber-fed spectrographs

Precise Doppler radial-velocity (RV) instruments will continue to play an essential role in advancing our holistic understanding of exoplanetary systems. The combination of orbital parameters from transit surveys and follow-up RV measurements is vital to unlock mass and density estimates of detected planets, giving us insight into their environment and structure. However, the exoplanet field is reaching a critical juncture: the measurement sensitivity of existing radial-velocity instruments is becoming the limiting factor in further increasing our knowledge. Without improvement in delivered RV measurement precision, we will not be able to provide dynamical mass and density estimates for some of the most exciting (and consequently most challenging) discoveries expected from new transit missions including the Transiting Exoplanet Survey Satellite (TESS) (Plavchan et al. 2015, Ricker et al. 2014). RV precisions at the 10cm/s level are required to fully confirm earth-like analogues, provide masses and measure density to the 1-5% level from these missions. Additionally, this RV capability will also be important to allow for efficient target selection for facilities such as the James Webb Space Telescope (JWST). A promising way forward to achieve this goal is to use single-mode fibers to inject light to a spectrograph. This mitigates many of the error terms facing current generation seeing-limited RV instruments while simultaneously offering the capability of high resolution spectroscopy within a small optical footprint (Schwab et al. 2012, Crepp 2014, Jovanovic et al. 2016a). We discuss the benefits of this technique, its challenges, and the current status of development.

astro-ph.IM↗

arXiv2018

Micro-lens array as tip-tilt sensor for single-mode fiber coupling

We introduce a design for a tip-tilt sensor with integrated single-mode fiber coupling for use with the front-end prototype of the iLocater spectrograph at the Large Binocular Telescope to detect vibrations that occur within the optical train. This sensor is made up of a micro-lens array printed on top of a fiber bundle consisting of a central single-mode fiber and six surrounding multi-mode fibers. The design in based on a previous prototype that utilized a multi-core fiber with seven single-mode fibers. With this updated design, we are able to achieve a better sensing throughput. We report on the modeled performance: if the beam is perfectly aligned, 69% light is coupled into the central single-mode fiber feeding the scientific instrument. When the beam is not aligned, some of the light will be coupled into the outer sensing fibers, providing the position of the beam for tip-tilt correction. For this design we show that there is a linear response in the sensing fibers when the beam is subject to tip-tilt movement. Furthermore we introduce an adaptive optics testbed, which we call the Koenigstuhl Observatory Opto-mechatronics Laboratory (KOOL), this testbed currently simulates vibrations at the Large Binocular Telescope, and in collaboration we have extended it to allow single-mode fiber coupling tests.

astro-ph.IM↗

arXiv2018

EarthFinder: A Precise Radial Velocity Probe Mission Concept For the Detection of Earth-Mass Planets Orbiting Sun-like Stars

EarthFinder is a Probe Mission concept selected for study by NASA for input to the 2020 astronomy decadal survey. This study is currently active and a final white paper report is due to NASA at the end of calendar 2018. We are tasked with evaluating the scientific rationale for obtaining precise radial velocity (PRV) measurements in space, which is a two-part inquiry: What can be gained from going to space? What can't be done form the ground? These two questions flow down to these specific tasks for our study - Identify the velocity limit, if any, introduced from micro- and macro-telluric absorption in the Earth's atmosphere; Evaluate the unique advantages that a space-based platform provides to emable the identification and mitigation of stellar acitivity for multi-planet signal recovery.

astro-ph.IM↗

arXiv2016

iLocater: A Diffraction-limited Doppler Spectrometer for the Large Binocular Telescope

We are developing a stable and precise spectrograph for the Large Binocular Telescope (LBT) named "iLocater." The instrument comprises three principal components: a cross-dispersed echelle spectrograph that operates in the YJ-bands (0.97-1.30 microns), a fiber-injection acquisition camera system, and a wavelength calibration unit. iLocater will deliver high spectral resolution (R~150,000-240,000) measurements that permit novel studies of stellar and substellar objects in the solar neighborhood including extrasolar planets. Unlike previous planet-finding instruments, which are seeing-limited, iLocater operates at the diffraction limit and uses single mode fibers to eliminate the effects of modal noise entirely. By receiving starlight from two 8.4m diameter telescopes that each use "extreme" adaptive optics (AO), iLocater shows promise to overcome the limitations that prevent existing instruments from generating sub-meter-per-second radial velocity (RV) precision. Although optimized for the characterization of low-mass planets using the Doppler technique, iLocater will also advance areas of research that involve crowded fields, line-blanketing, and weak absorption lines.

astro-ph.IM↗

arXiv2016

On-sky single-mode fiber coupling measurements at the Large Binocular Telescope

The demonstration of efficient single-mode fiber (SMF) coupling is a key requirement for the development of a compact, ultra-precise radial velocity (RV) spectrograph. iLocater is a next generation instrument for the Large Binocular Telescope (LBT) that uses adaptive optics (AO) to inject starlight into a SMF. In preparation for commissioning iLocater, a prototype SMF injection system was installed and tested at the LBT in the Y-band (0.970-1.065 $\mu$m). This system was designed to verify the capability of the LBT AO system as well as characterize on-sky SMF coupling efficiencies. SMF coupling was measured on stars with variable airmasses, apparent magnitudes, and seeing conditions for six half-nights using the Large Binocular Telescope Interferometer. We present the overall optical and mechanical performance of the SMF injection system, including details of the installation and alignment procedure. A particular emphasis is placed on analyzing the instrument's performance as a function of telescope elevation to inform the final design of the fiber injection system for iLocater.

astro-ph.IM↗

arXiv2015

Design of the iLocater Acquisition Camera Demonstration System

Existing planet-finding spectrometers are limited by systematic errors that result from their seeing-limited design. Of particular concern is the use of multi-mode fibers (MMFs), which introduce modal noise and accept significant amounts of background radiation from the sky. We present the design of a single-mode fiber-based acquisition camera for a diffraction-limited spectrometer named "iLocater." By using the "extreme" adaptive optics (AO) system of the Large Binocular Telescope (LBT), iLocater will overcome the limitations that prevent Doppler instruments from reaching their full potential, allowing precise radial velocity (RV) measurements of terrestrial planets around nearby bright stars. The instrument presented in this paper, which we refer to as the acquisition camera "demonstration system," will measure on-sky single-mode fiber (SMF) coupling efficiency using one of the 8.4m primaries of the LBT in fall 2015.

astro-ph.IM↗