arXiv subjects

Andrew E. Szymkowiak

Publications and source records attributed to Andrew E. Szymkowiak.

16 recordsLinked to original sources

arXiv2026

CHIANTE I: Obliquity Measurements of Four High-Priority Ariel Targets in Binaries

We present the first results from CHIANTE: a program using the EXtreme PREcision Spectrograph (EXPRES) at the Lowell Discovery Telescope to characterize potential targets of the Ariel mission, anticipated to launch in 2031. We report Rossiter-McLaughlin measurements of four Ariel tier 3 hot-Jupiters which reside in binary star systems: KELT-2 Ab, KELT-3 Ab, TOI-1333 Ab, and TOI-1789 Ab. Joint modeling of EXPRES and archival radial velocities with photometry from TESS finds all four planets to be aligned their host stars, despite the host stars spanning the $T_{\text{eff}}$ realignment break, which has been found to divide the planets in multi-star systems into two subsets: those around cool stars that are preferentially aligned, and those around hot stars that exhibit stellar obliquities consistent with isotropy. We revise the $T_{\text{eff}}$ realignment break to be $=6193\pm103$ K, consistent with, but hotter than, previous work. We compare the observed stellar obliquity distribution for all multi-star, hot-Jupiter hosts above this boundary to an expected distribution produced via stellar von-Zeipel-Kozai-Lidov (ZKL) oscillations, a mechanism often invoked to explain misaligned planets in multi-star systems. A simple population synthesis model finds that a pure ZKL population is unable to replicate the observed obliquities. In particular, both the number of aligned and near-polar systems we see today are underestimated. However, adding contributions from aligned and planet-planet scattering populations alongside ZKL oscillations better describes the observed distribution. Nonetheless, more obliquity measurements for planets in multi-star systems are needed to better discern the contributions of each mechanism the observed stellar obliquity distribution.

astro-ph.EP↗

arXiv2026

Uncovering Hidden Systematics in Extreme-Precision Radial Velocity Measurements

We identify and correct for small but coherent instrumental drifts in seven years of radial velocity data from the EXtreme PREcision Spectrograph (EXPRES). The systematics are most notable for the six months before and after 2022 January, when EXPRES experienced larger temperature variations, and we see a systematic trough-to-peak amplitude of 2.8 m/s in the radial velocities. This is large enough to mimic or obscure planetary signatures. To isolate and correct these effects, we develop a suite of diagnostics that track two-dimensional échellogram shifts, scalings, and rotation, as well as line bisector spans (LBS) derived from laser frequency comb (LFC) lines. By combining these empirical tracers with instrument telemetry in a multi-dimensional regression, we reduce the EXPRES instrument trend traced with solar RVs from an RMS of 1.32 m/s to 0.43 m/s, a 67% improvement, and the aggregate of twelve chromospherically quiet stars show a 26% reduction in velocity scatter. Our injection-recovery simulations further demonstrate a doubling in sensitivity to low-amplitude planetary signals after correction. When applied to the stellar time series of $ρ$ Coronae Borealis ($ρ$CrB), the correction removes a spurious planet d signal, restoring the integrity of the data. These results highlight the need for long-term monitoring and multi-dimensional calibration diagnostics on the path toward true centimeter-per-second precision in next-generation EPRV instruments.

astro-ph.IM↗

arXiv2023

The Extreme Stellar-Signals Project III. Combining Solar Data from HARPS, HARPS-N, EXPRES, and NEID

We present an analysis of Sun-as-a-star observations from four different high-resolution, stabilized spectrographs -- HARPS, HARPS-N, EXPRES, and NEID. With simultaneous observations of the Sun from four different instruments, we are able to gain insight into the radial velocity precision and accuracy delivered by each of these instruments and isolate instrumental systematics that differ from true astrophysical signals. With solar observations, we can completely characterize the expected Doppler shift contributed by orbiting Solar System bodies and remove them. This results in a data set with measured velocity variations that purely trace flows on the solar surface. Direct comparisons of the radial velocities measured by each instrument show remarkable agreement with residual intra-day scatter of only 15-30 cm/s. This shows that current ultra-stabilized instruments have broken through to a new level of measurement precision that reveals stellar variability with high fidelity and detail. We end by discussing how radial velocities from different instruments can be combined to provide powerful leverage for testing techniques to mitigate stellar signals.

astro-ph.EP↗

arXiv2023

Refining the Stellar Parameters of $τ$ Ceti: a Pole-on Solar Analog

To accurately characterize the planets a star may be hosting, stellar parameters must first be well-determined. $τ$ Ceti is a nearby solar analog and often a target for exoplanet searches. Uncertainties in the observed rotational velocities have made constraining $τ$ Ceti's inclination difficult. For planet candidates from radial velocity (RV) observations, this leads to substantial uncertainties in the planetary masses, as only the minimum mass ($m \sin i$) can be constrained with RV. In this paper, we used new long-baseline optical interferometric data from the CHARA Array with the MIRC-X beam combiner and extreme precision spectroscopic data from the Lowell Discovery Telescope with EXPRES to improve constraints on the stellar parameters of $τ$ Ceti. Additional archival data were obtained from a Tennessee State University Automatic Photometric Telescope and the Mount Wilson Observatory HK project. These new and archival data sets led to improved stellar parameter determinations, including a limb-darkened angular diameter of $2.019 \pm 0.012$ mas and rotation period of $46 \pm 4$ days. By combining parameters from our data sets, we obtained an estimate for the stellar inclination of $7\pm7^\circ$. This nearly-pole-on orientation has implications for the previously-reported exoplanets. An analysis of the system dynamics suggests that the planetary architecture described by Feng et al. (2017) may not retain long-term stability for low orbital inclinations. Additionally, the inclination of $τ$ Ceti reveals a misalignment between the inclinations of the stellar rotation axis and the previously-measured debris disk rotation axis ($i_\mathrm{disk} = 35 \pm 10^\circ$).

astro-ph.SR↗

arXiv2023

EXPRES IV: Two Additional Planets Orbiting $ρ$ Coronae Borealis Reveal Uncommon System Architecture

Thousands of exoplanet detections have been made over the last twenty-five years using Doppler observations, transit photometry, direct imaging, and astrometry. Each of these methods is sensitive to different ranges of orbital separations and planetary radii (or masses). This makes it difficult to fully characterize exoplanet architectures and to place our solar system in context with the wealth of discoveries that have been made. Here, we use the EXtreme PREcision Spectrograph (EXPRES) to reveal planets in previously undetectable regions of the mass-period parameter space for the star $ρ$ Coronae Borealis. We add two new planets to the previously known system with one hot Jupiter in a 39-day orbit and a warm super-Neptune in a 102-day orbit. The new detections include a temperate Neptune planet ($M{\sin{i}} \sim 20$ M$_\oplus$) in a 281.4-day orbit and a hot super-Earth ($M{\sin{i}} = 3.7$ M$_\oplus$) in a 12.95-day orbit. This result shows that details of planetary system architectures have been hiding just below our previous detection limits; this signals an exciting era for the next generation of extreme precision spectrographs.

astro-ph.EP↗

arXiv2022

Measured Spin-Orbit Alignment of Ultra-Short Period Super-Earth 55 Cancri e

A planet's orbital alignment places important constraints on how a planet formed and consequently evolved. The dominant formation pathway of ultra-short period planets ($P<1$ day) is particularly mysterious as such planets most likely formed further out, and it is not well understood what drove their migration inwards to their current positions. Measuring the orbital alignment is difficult for smaller super-Earth/sub-Neptune planets, which give rise to smaller amplitude signals. Here we present radial velocities across two transits of 55 Cancri e, an ultra-short period Super-Earth, observed with the Extreme Precision Spectrograph (EXPRES). Using the classical Rossiter-McLaughlin (RM) method, we measure 55 Cnc e's sky-projected stellar spin-orbit alignment (i.e., the projected angle between the planet's orbital axis and its host star's spin axis) to be $λ=10\substack{+17\\ -20}^{\circ}$ with an unprojected angle of $ψ=23\substack{+14\\ -12}^{\circ}$. The best-fit RM model to the EXPRES data has a radial velocity semi-amplitude of just $0.41\substack{+0.09\\ -0.10} m s^{-1}$. The spin-orbit alignment of 55 Cnc e favors dynamically gentle migration theories for ultra-short period planets, namely tidal dissipation through low-eccentricity planet-planet interactions and/or planetary obliquity tides.

astro-ph.EP↗

arXiv2022

The EXPRES Stellar Signals Project II. State of the Field in Disentangling Photospheric Velocities

Measured spectral shifts due to intrinsic stellar variability (e.g., pulsations, granulation) and activity (e.g., spots, plages) are the largest source of error for extreme precision radial velocity (EPRV) exoplanet detection. Several methods are designed to disentangle stellar signals from true center-of-mass shifts due to planets. The EXPRES Stellar Signals Project (ESSP) presents a self-consistent comparison of 22 different methods tested on the same extreme-precision spectroscopic data from EXPRES. Methods derived new activity indicators, constructed models for mapping an indicator to the needed RV correction, or separated out shape- and shift-driven RV components. Since no ground truth is known when using real data, relative method performance is assessed using the total and nightly scatter of returned RVs and agreement between the results of different methods. Nearly all submitted methods return a lower RV RMS than classic linear decorrelation, but no method is yet consistently reducing the RV RMS to sub-meter-per-second levels. There is a concerning lack of agreement between the RVs returned by different methods. These results suggest that continued progress in this field necessitates increased interpretability of methods, high-cadence data to capture stellar signals at all timescales, and continued tests like the ESSP using consistent data sets with more advanced metrics for method performance. Future comparisons should make use of various well-characterized data sets -- such as solar data or data with known injected planetary and/or stellar signals -- to better understand method performance and whether planetary signals are preserved.

astro-ph.EP↗

arXiv2020

EXPRES. II. Searching for Planets Around Active Stars: A Case Study of HD 101501

By controlling instrumental errors to below 10 cm/s, the EXtreme PREcision Spectrograph (EXPRES) allows for a more insightful study of photospheric velocities that can mask weak Keplerian signals. Gaussian Processes (GP) have become a standard tool for modeling correlated noise in radial velocity datasets. While GPs are constrained and motivated by physical properties of the star, in some cases they are still flexible enough to absorb unresolved Keplerian signals. We apply GP regression to EXPRES radial velocity measurements of the 3.5 Gyr old chromospherically active Sun-like star, HD 101501. We obtain tight constraints on the stellar rotation period and the evolution of spot distributions using 28 seasons of ground-based photometry, as well as recent $TESS$ data. Light curve inversion was carried out on both photometry datasets to reveal the spot distribution and spot evolution timescales on the star. We find that the $> 5$ m/s rms radial velocity variations in HD 101501 are well-modeled with a GP stellar activity model without planets, yielding a residual rms scatter of 45 cm/s. We carry out simulations, injecting and recovering signals with the GP framework, to demonstrate that high-cadence observations are required to use GPs most efficiently to detect low-mass planets around active stars like HD 101501. Sparse sampling prevents GPs from learning the correlated noise structure and can allow it to absorb prospective Keplerian signals. We quantify the moderate to high-cadence monitoring that provides the necessary information to disentangle photospheric features using GPs and to detect planets around active stars.

astro-ph.EP↗

arXiv2020

EXPRES I. HD~3651 an Ideal RV Benchmark

The next generation of exoplanet-hunting spectrographs should deliver up to an order of magnitude improvement in radial velocity precision over the standard 1 m/s state of the art. This advance is critical for enabling the detection of Earth-mass planets around Sun-like stars. New calibration techniques such as laser frequency combs and stabilized etalons ensure that the instrumental stability is well characterized. However, additional sources of error include stellar noise, undetected short-period planets, and telluric contamination. To understand and ultimately mitigate error sources, the contributing terms in the error budget must be isolated to the greatest extent possible. Here, we introduce a new high cadence radial velocity program, the EXPRES 100 Earths program, which aims to identify rocky planets around bright, nearby G and K dwarfs. We also present a benchmark case: the 62-d orbit of a Saturn-mass planet orbiting the chromospherically quiet star, HD 3651. The combination of high eccentricity (0.6) and a moderately long orbital period, ensures significant dynamical clearing of any inner planets. Our Keplerian model for this planetary orbit has a residual RMS of 58 cm/s over a $\sim 6$ month time baseline. By eliminating significant contributors to the radial velocity error budget, HD 3651 serves as a standard for evaluating the long term precision of extreme precision radial velocity (EPRV) programs.

astro-ph.EP↗

arXiv2020

An Extreme Precision Radial Velocity Pipeline: First Radial Velocities from EXPRES

The EXtreme PREcision Spectrograph (EXPRES) is an environmentally stabilized, fiber-fed, $R=137,500$, optical spectrograph. It was recently commissioned at the 4.3-m Lowell Discovery Telescope (LDT) near Flagstaff, Arizona. The spectrograph was designed with a target radial-velocity (RV) precision of 30$\mathrm{~cm~s^{-1}}$. In addition to instrumental innovations, the EXPRES pipeline, presented here, is the first for an on-sky, optical, fiber-fed spectrograph to employ many novel techniques---including an "extended flat" fiber used for wavelength-dependent quantum efficiency characterization of the CCD, a flat-relative optimal extraction algorithm, chromatic barycentric corrections, chromatic calibration offsets, and an ultra-precise laser frequency comb for wavelength calibration. We describe the reduction, calibration, and radial-velocity analysis pipeline used for EXPRES and present an example of our current sub-meter-per-second RV measurement precision, which reaches a formal, single-measurement error of 0.3$\mathrm{~m~s^{-1}}$ for an observation with a per-pixel signal-to-noise ratio of 250. These velocities yield an orbital solution on the known exoplanet host 51 Peg that matches literature values with a residual RMS of 0.895$\mathrm{~m~s^{-1}}$.

astro-ph.IM↗

arXiv2020

Performance Verification of the EXtreme PREcision Spectrograph

The EXtreme PREcision Spectrograph (EXPRES) is a new Doppler spectrograph designed to reach a radial velocity measurement precision sufficient to detect Earth-like exoplanets orbiting nearby, bright stars. We report on extensive laboratory testing and on-sky observations to quantitatively assess the instrumental radial velocity measurement precision of EXPRES, with a focused discussion of individual terms in the instrument error budget. We find that EXPRES can reach a single-measurement instrument calibration precision better than 10 cm/s, not including photon noise from stellar observations. We also report on the performance of the various environmental, mechanical, and optical subsystems of EXPRES, assessing any contributions to radial velocity error. For atmospheric and telescope related effects, this includes the fast tip-tilt guiding system, atmospheric dispersion compensation, and the chromatic exposure meter. For instrument calibration, this includes the laser frequency comb (LFC), flat-field light source, CCD detector, and effects in the optical fibers. Modal noise is mitigated to a negligible level via a chaotic fiber agitator, which is especially important for wavelength calibration with the LFC. Regarding detector effects, we empirically assess the impact on radial velocity precision due to pixel-position non-uniformities (PPNU) and charge transfer inefficiency (CTI). EXPRES has begun its science survey to discover exoplanets orbiting G-dwarf and K-dwarf stars, in addition to transit spectroscopy and measurements of the Rossiter-McLaughlin effect.

astro-ph.IM↗

arXiv2018

Modal Noise Mitigation through Fiber Agitation for Fiber-fed Radial Velocity Spectrographs

Optical fiber modal noise is a limiting factor for high precision spectroscopy signal-to-noise in the near-infrared and visible. Unabated, especially when using highly coherent light sources for wavelength calibration, modal noise can induce radial velocity (RV) errors that hinder the discovery of low-mass (and potentially Earth-like) planets. Previous research in this field has found sufficient modal noise mitigation through the use of an integrating sphere, but this requires extremely bright light sources, a luxury not necessarily afforded by the next generation of high-resolution optical spectrographs. Otherwise, mechanical agitation, which "mixes" the fiber's modal patterns and allows the noise to be averaged over minutes-long exposures, provides some noise reduction but the exact mechanism behind improvement in signal-to-noise and RV drift has not been fully explored or optimized by the community. Therefore, we have filled out the parameter space of modal noise agitation techniques in order to better understand agitation's contribution to mitigating modal noise and to discover a better method for agitating fibers. We find that modal noise is best suppressed by the quasi-chaotic motion of two high-amplitude agitators oscillating with varying phase for fibers with large core diameters and low azimuthal symmetry. This work has subsequently influenced the design of a fiber agitator, to be installed with the EXtreme PREcision Spectrograph, that we estimate will reduce modal-noise-induced RV error to less than 3.2 cm/s.

astro-ph.IM↗

arXiv2017

Accounting for Chromatic Atmospheric Effects on Barycentric Corrections

Atmospheric effects on stellar radial velocity measurements for exoplanet discovery and characterization have not yet been fully investigated for extreme precision levels. We carry out calculations to determine the wavelength dependence of barycentric corrections across optical wavelengths, due to the ubiquitous variations in air mass during observations. We demonstrate that radial velocity errors of at least several cm/s can be incurred if the wavelength dependence is not included in the photon-weighted barycentric corrections. A minimum of four wavelength channels across optical spectra (380-680 nm) are required to account for this effect at the 10 cm/s level, with polynomial fits of the barycentric corrections applied to cover all wavelengths. Additional channels may be required in poor observing conditions or to avoid strong telluric absorption features. Furthermore, consistent flux sampling on the order of seconds throughout the observation is necessary to ensure that accurate photon weights are obtained. Finally, we describe how a multiple-channel exposure meter will be implemented in the EXtreme PREcision Spectrograph (EXPRES).

astro-ph.EP↗

arXiv2015

Searching for keV Sterile Neutrino Dark Matter with X-ray Microcalorimeter Sounding Rockets

High-resolution X-ray spectrometers onboard suborbital sounding rockets can search for dark matter candidates that produce X-ray lines, such as decaying keV-scale sterile neutrinos. Even with exposure times and effective areas far smaller than XMM-Newton and Chandra observations, high-resolution, wide field-of-view observations with sounding rockets have competitive sensitivity to decaying sterile neutrinos. We analyze a subset of the 2011 observation by the X-ray Quantum Calorimeter instrument centered on Galactic coordinates l = 165, b = -5 with an effective exposure of 106 seconds, obtaining a limit on the sterile neutrino mixing angle of sin^2(2 theta) < 7.2e-10 at 95% CL for a 7 keV neutrino. Better sensitivity at the level of sin^2(2 theta) ~ 2.1e-11 at 95\% CL for a 7 keV neutrino is achievable with future 300-second observations of the galactic center by the Micro-X instrument, providing a definitive test of the sterile neutrino interpretation of the reported 3.56 keV excess from galaxy clusters.

astro-ph.CO↗

arXiv2015

Fiber scrambling for high-resolution spectrographs. II. A double fiber scrambler for Keck Observatory

We have designed a fiber scrambler as a prototype for the Keck HIRES spectrograph, using double scrambling to stabilize illumination of the spectrometer and a pupil slicer to increase spectral resolution to R = 70,000 with minimal slit losses. We find that the spectral line spread function (SLSF) for the double scrambler observations is 18 times more stable than the SLSF for comparable slit observations and 9 times more stable than the SLSF for a single fiber scrambler that we tested in 2010. For the double scrambler test data, we further reduced the radial velocity scatter from an average of 2.1 m/s to 1.5 m/s after adopting a median description of the stabilized SLSF in our Doppler model. This demonstrates that inaccuracies in modeling the SLSF contribute to the velocity RMS. Imperfect knowledge of the SLSF, rather than stellar jitter, sets the precision floor for chromospherically quiet stars analyzed with the iodine technique using Keck HIRES and other slit-fed spectrometers. It is increasingly common practice for astronomers to scale stellar noise in quadrature with formal errors such that their Keplerian model yields a chi-squared fit of 1.0. When this is done, errors from inaccurate modeling of the SLSF (and perhaps from other sources) are attributed to the star and the floor of the stellar noise is overestimated.

astro-ph.IM↗

arXiv2001

The Thermal X-ray Emitting Shell of LMC Supernova Remnant 0540-693

We use data from the Advanced CCD Imaging Spectrometer (ACIS) on the Chandra X-ray Observatory to image the shell surrounding the pulsar B0540-69, and to measure its spectral properties. Weak emission line features, notably of Fe, Mg and Si, indicate that the shell is composed primarily of ambient material heated by the blast wave. The shell emission in the east is faint and circular in appearance, with a temperature and ionization age of approximately 5 keV and 10^10 cm^-3 s, respectively. The emission in the west is brighter and has a more complex, distorted morphology, and is fitted with significantly lower average temperatures and higher ionization ages. An image with photon energies above 2 keV shows two hard arcs of emission located diametrically opposite each other at the outer boundary of the remnant shell; the spectra from these regions could include a substantial nonthermal component.

astro-ph↗