arXiv subjects

Andrew J. Kerman

Publications and source records attributed to Andrew J. Kerman.

32 records · Page 2Linked to original sources

arXiv2013

Readout of superconducting nanowire single-photon detectors at high count rates

Superconducting nanowire single-photon detectors are set apart from other photon counting technologies above all else by their extremely high speed, with few-ten-ps timing resolution, and recovery times $τ_R\lesssim$10 ns after a detection event. In this work, however, we identify in the conventional electrical readout scheme a nonlinear interaction between the detector and its readout which can make stable, high-efficiency operation impossible at count rates even an order-of-magnitude less than $τ_R^{-1}$. We present detailed experimental confirmation of this, and a theoretical model which quantitatively explains our observations. Finally, we describe an improved readout which circumvents this problem, allowing these detectors to be operated stably at high count rates, with a detection efficiency penalty determined purely by their inductive reset time.

physics.ins-det↗

arXiv2012

Loading of a surface-electrode ion trap from a remote, precooled source

We demonstrate loading of ions into a surface-electrode trap (SET) from a remote, laser-cooled source of neutral atoms. We first cool and load $\sim$ $10^6$ neutral $^{88}$Sr atoms into a magneto-optical trap from an oven that has no line of sight with the SET. The cold atoms are then pushed with a resonant laser into the trap region where they are subsequently photoionized and trapped in an SET operated at a cryogenic temperature of 4.6 K. We present studies of the loading process and show that our technique achieves ion loading into a shallow (15 meV depth) trap at rates as high as 125 ions/s while drastically reducing the amount of metal deposition on the trap surface as compared with direct loading from a hot vapor. Furthermore, we note that due to multiple stages of isotopic filtering in our loading process, this technique has the potential for enhanced isotopic selectivity over other loading methods. Rapid loading from a clean, isotopically pure, and precooled source may enable scalable quantum information processing with trapped ions in large, low-depth surface trap arrays that are not amenable to loading from a hot atomic beam.

physics.atom-ph↗

arXiv2012

Quantum simulator of an open quantum system using superconducting qubits: exciton transport in photosynthetic complexes

Open quantum system approaches are widely used in the description of physical, chemical and biological systems. A famous example is electronic excitation transfer in the initial stage of photosynthesis, where harvested energy is transferred with remarkably high efficiency to a reaction center. This transport is affected by the motion of a structured vibrational environment, which makes simulations on a classical computer very demanding. Here we propose an analog quantum simulator of complex open system dynamics with a precisely engineered quantum environment. Our setup is based on superconducting circuits, a well established technology. As an example, we demonstrate that it is feasible to simulate exciton transport in the Fenna-Matthews-Olson photosynthetic complex. Our approach allows for a controllable single-molecule simulation and the investigation of energy transfer pathways as well as non-Markovian noise-correlation effects.

quant-ph↗

arXiv2009

A metastable superconducting qubit

We propose a superconducting qubit design, based on a tunable RF-SQUID and nanowire kinetic inductors, which has a dramatically reduced transverse electromagnetic coupling to its environment, so that its excited state should be metastable. If electromagnetic interactions are in fact responsible for the current excited-state decay rates of superconducting qubits, this design should result in a qubit lifetime orders of magnitude longer than currently possible. Furthermore, since accurate manipulation and readout of superconducting qubits is currently limited by spontaneous decay, much higher fidelities may be realizable with this design.

cond-mat.mes-hall↗

arXiv2008

Electrothermal feedback in superconducting nanowire single-photon detectors

We investigate the role of electrothermal feedback in the operation of superconducting nanowire single-photon detectors (SNSPDs). It is found that the desired mode of operation for SNSPDs is only achieved if this feedback is unstable, which happens naturally through the slow electrical response associated with their relatively large kinetic inductance. If this response is sped up in an effort to increase the device count rate, the electrothermal feedback becomes stable and results in an effect known as latching, where the device is locked in a resistive state and can no longer detect photons. We present a set of experiments which elucidate this effect, and a simple model which quantitatively explains the results.

cond-mat.supr-con↗

arXiv2008

Optical Properties of Superconducting Nanowire Single-Photon Detectors

We measured the optical absorptance of superconducting nanowire single photon detectors. We found that 200-nm-pitch, 50%-fill-factor devices had an average absorptance of 21% for normally-incident front-illumination of 1.55-um-wavelength light polarized parallel to the nanowires, and only 10% for perpendicularly-polarized light. We also measured devices with lower fill-factors and narrower wires that were five times more sensitive to parallel-polarized photons than perpendicular-polarized photons. We developed a numerical model that predicts the absorptance of our structures. We also used our measurements, coupled with measurements of device detection efficiencies, to determine the probability of photon detection after an absorption event. We found that, remarkably, absorbed parallel-polarized photons were more likely to result in detection events than perpendicular-polarized photons, and we present a hypothesis that qualitatively explains this result. Finally, we also determined the enhancement of device detection efficiency and absorptance due to the inclusion of an integrated optical cavity over a range of wavelengths (700-1700 nm) on a number of devices, and found good agreement with our numerical model.

physics.optics↗

arXiv2008

Photon-number-resolution with sub-30-ps timing using multi-element superconducting nanowire single photon detectors

A photon-number-resolving detector based on a four-element superconducting nanowire single photon detector is demonstrated to have sub-30-ps resolution in measuring the arrival time of individual photons. This detector can be used to characterize the photon statistics of non-pulsed light sources and to mitigate dead-time effects in high-speed photon counting applications. Furthermore, a 25% system detection efficiency at 1550 nm was demonstrated, making the detector useful for both low-flux source characterization and high-speed photon-counting and quantum communication applications. The design, fabrication and testing of this detector are described, and a comparison between the measured and theoretical performance is presented.

physics.ins-det↗

arXiv2008

High-fidelity quantum operations on superconducting qubits in the presence of noise

We present a scheme for implementing quantum operations with superconducting qubits. Our approach uses a "coupler" qubit to mediate a controllable, secular interaction between "data" qubits, pulse sequences which strongly mitigate the effects of 1/f flux noise, and a high-Q resonator-based local memory. We develop a Monte-Carlo simulation technique capable of describing arbitrary noise-induced dephasing and decay, and demonstrate in this system a set of universal gate operations with O(10^-5) error probabilities in the presence of experimentally measured levels of 1/f noise. We then add relaxation and quantify the decay times required to maintain this error level.

quant-ph↗

arXiv2007

Constriction-limited detection efficiency of superconducting nanowire single-photon detectors

We investigate the source of large variations in the observed detection effiiencies of superconducting nanowire single-photon detectors between many nominally identical devices. Through both electrical and optical measurements, we infer that these variations arise from "constrictions:" highly localized regions of the nanowires where the effective cross-sectional area for superconducting current is reduced. These constrictions limit the DC bias current density to well below its critical value over the remainder of the wire, and thus prevent the detection efficiency from reaching the high values that occur in these devices only when they are biased near the critical current density.

physics.ins-det↗

arXiv2005

Kinetic-inductance-limited reset time of superconducting nanowire photon counters

We investigate the recovery of superconducting NbN-nanowire photon counters after detection of an optical pulse at a wavelength of 1550 nm, and present a model that quantitatively accounts for our observations. The reset time is found to be limited by the large kinetic inductance of these nanowires, which forces a tradeoff between counting rate and either detection efficiency or active area. Devices of usable size and high detection efficiency are found to have reset times orders of magnitude longer than their intrinsic photoresponse time.

physics.ins-det↗

arXiv2004

Production and state-selective detection of ultracold, ground state RbCs molecules

Using resonance-enhanced two-photon ionization, we detect ultracold, ground-state RbCs molecules formed via photoassociation in a laser-cooled mixture of 85Rb and 133Cs atoms. We obtain extensive bound-bound excitation spectra of these molecules, which provide detailed information about their vibrational distribution, as well as spectroscopic data on the RbCs ground a^3Σ^+ and excited (2)^3Σ^+, (1)^1Πstates. Analysis of this data allows us to predict strong transitions from observed excited levels to the absolute vibronic ground state of RbCs, potentially allowing the production of stable, ultracold polar molecules at rates as large as 10^7 s^{-1}.

physics.atom-ph↗

arXiv2003

Ultracold Cs$_2$ Feshbach Spectroscopy

We have observed and located more than 60 magnetic field-induced Feshbach resonances in ultracold collisions of ground-state $^{133}$Cs atoms. These resonances are associated with molecular states with up to four units of rotational angular momentum, and are detected through variations in the elastic, inelastic, and radiative collision cross sections. These observations allow us to greatly improve upon the interaction potentials between two cesium atoms and to reproduce the positions of most resonances to accuracies better than 0.5%. Based on the relevant coupling scheme between the electron spin, nuclear spin, and orbital angular momenta of the nuclei, quantum numbers and energy structure of the molecular states beneath the dissociation continuum are revealed. Finally, we predict the relevant collision properties for cesium Bose-Einstein condensation experiments.

cond-mat.soft↗

arXiv2003

Production of Ultracold, Polar RbCs* Molecules via Photoassociation

We have produced ultracold, polar RbCs* molecules via photoassociation in a laser-cooled mixture of Rb and Cs atoms. Using a model of the RbCs* molecular interaction which reproduces the observed rovibrational structure, we infer decay rates in our experiments into deeply bound singlet ground state RbCs vibrational levels as high as 5 x 10^5 s^-1 per level. Population in such deeply bound levels could be efficiently transferred to the vibrational ground state using a single stimulated Raman transition, opening the possibility to create large samples of stable, ultracold polar molecules.

physics.atom-ph↗

arXiv2002

Sensitive Detection of Cold Cesium Molecules by Radiative Feshbach Spectroscopy

We observe the dynamic formation of $Cs_2$ molecules near Feshbach resonances in a cold sample of atomic cesium using an external probe beam. This method is 300 times more sensitive than previous atomic collision rate methods, and allows us to detect more than 20 weakly-coupled molecular states, with collisional formation cross sections as small as $σ=3\times 10^{-16}$cm$^2$. We propose a model to describe the atom-molecule coupling, and estimate that more than $2 \times 10^5$ $Cs_2$ molecules coexist in dynamical equilibrium with $10^8$ $Cs$ atoms in our trap for several seconds.

cond-mat↗