SearcharxivSearch

arXiv subjects

Andrew Mueller

Publications and source records attributed to Andrew Mueller.

10 recordsLinked to original sources

High-dimensional quantum communication with scalable photonic entanglement in time and frequency

High-dimensional photonic entanglement holds significant promise for advancing quantum communication, computation, and metrology. For example, large-alphabet quantum communication protocols are known to benefit from enhanced noise resilience and information capacity via multi-bit time-bin encoding. Yet, characterizing high-dimensional entangled states is challenging, as full state tomography becomes prohibitively costly and often requires unrealizable measurements. Here, we demonstrate a scan-free method to characterize high-dimensional entanglement in the time-frequency domain. Our reconstruction achieves a record $5.70\pm0.07$ ebits and a fidelity of $65.4\pm0.4\%$ with the maximally entangled state of local dimension $1021$, certifying the presence of $668$-dimensional entanglement. We further prove the attainability of a secure key rate of $15.6$ kB/s in a composable finite-size, entanglement-based protocol, and show that in continuous operation, the setup can quickly approach asymptotic key rates. Using commercial telecom components and state-of-the-art low-jitter single-photon detectors, our scalable architecture offers a practical path towards high-rate, noise-resilient quantum communication testbeds.

quant-ph

Experimental high-dimensional entanglement certification and quantum steering with time-energy measurements

High-dimensional entanglement provides unique ways of transcending the limitations of current approaches in quantum information processing, quantum communications based on qubits. The generation of time-frequency qudit states offer significantly increased quantum capacities while keeping the number of photons constant, but pose significant challenges regarding the possible measurements for certification of entanglement. Here, we develop a new scheme and experimentally demonstrate the certification of 24-dimensional entanglement and a 9-dimensional quantum steering. We then subject our photon-pairs to dispersion conditions equivalent to the transmission through 600-km of fiber and still certify 21-dimensional entanglement. Furthermore, we use a steering inequality to prove 7-dimensional entanglement in a semi-device independent manner, proving that large chromatic dispersion is not an obstacle in distributing and certifying high-dimensional entanglement and quantum steering. Our approach, leveraging intrinsic large-alphabet nature of telecom-band photons, enables scalable, commercially viable, and field-deployable entangled and steerable quantum sources, providing a pathway towards fully scalable quantum information processer and high-dimensional quantum communication networks.

quant-ph

High-rate multiplexed entanglement source based on time-bin qubits for advanced quantum networks

Entanglement distribution based on time-bin qubits is an attractive option for emerging quantum networks. We demonstrate a 4.09 GHz repetition rate source of photon pairs entangled across early and late time bins separated by 80 ps. Simultaneous high rates and high visibilities are achieved through frequency multiplexing the spontaneous parametric down conversion output into 8 time-bin entangled pairs. We demonstrate entanglement visibilities as high as 99.4%, total entanglement rates up to 3.55e6 coincidences/s, and predict a straightforward path towards achieving up to an order of magnitude improvement in rates without compromising visibility. Finally, we resolve the density matrices of the entangled states for each multiplexed channel and express distillable entanglement rates in ebit/s, thereby quantifying the tradeoff between visibility and coincidence rates that contributes to useful entanglement distribution. This source is a fundamental building block for high-rate entanglement-based quantum key distribution systems or advanced quantum networks.

quant-ph

High-dimensional time-frequency entanglement in a singly-filtered biphoton frequency comb

High-dimensional quantum entanglement is a cornerstone for advanced technology enabling large-scale noise-tolerant quantum systems, fault-tolerant quantum computing, and distributed quantum networks. The recently developed biphoton frequency comb (BFC) provides a powerful platform for high-dimensional quantum information processing in its spectral and temporal quantum modes. Here we propose and generate a singly-filtered high-dimensional BFC via spontaneous parametric down-conversion by spectrally shaping only the signal photons with a Fabry-Perot cavity. High-dimensional energy-time entanglement is verified through Franson-interference recurrences and temporal correlation with low-jitter detectors. Frequency- and temporal- entanglement of our singly-filtered BFC is then quantified by Schmidt mode decomposition. Subsequently, we distribute the high-dimensional singly-filtered BFC state over a 10 km fiber link with a post-distribution time-bin dimension lower bounded to be at least 168. Our demonstrations of high-dimensional entanglement and entanglement distribution show the capability of the singly-filtered quantum frequency comb for high-efficiency quantum information processing and high-capacity quantum networks.

quant-ph

High-speed detection of 1550 nm single photons with superconducting nanowire detectors

Superconducting nanowire single photon detectors are a key technology for quantum information and science due to their high efficiency, low timing jitter, and low dark counts. In this work, we present a detector for single 1550 nm photons with up to 78% detection efficiency, timing jitter below 50 ps FWHM, 158 counts/s dark count rate - as well as a world-leading maximum count rate of 1.5 giga-counts/s at 3 dB compression. The PEACOQ detector (Performance-Enhanced Array for Counting Optical Quanta) comprises a linear array of 32 straight superconducting niobium nitride nanowires which span the mode of an optical fiber. This design supports high count rates with minimal penalties for detection efficiency and timing jitter. We show how these trade-offs can be mitigated by implementing independent read-out for each nanowire and by using a temporal walk correction technique to reduce count-rate dependent timing jitter. These detectors make quantum communication practical on a 10 GHz clock.

quant-ph

Time-walk and jitter correction in SNSPDs at high count rates

Superconducting nanowire single-photon detectors (SNSPDs) are a leading detector type for time correlated single photon counting, especially in the near-infrared. When operated at high count rates, SNSPDs exhibit increased timing jitter caused by internal device properties and features of the RF amplification chain. Variations in RF pulse height and shape lead to variations in the latency of timing measurements. To compensate for this, we demonstrate a calibration method that correlates delays in detection events with the time elapsed between pulses. The increase in jitter at high rates can be largely canceled in software by applying corrections derived from the calibration process. We demonstrate our method with a single-pixel tungsten silicide SNSPD and show it decreases high count rate jitter. The technique is especially effective at removing a long tail that appears in the instrument response function at high count rates. At a count rate of 11.4 MCounts/s we reduce the full width at one percent maximum level (FW1%M) by 45%. The method therefore enables certain quantum communication protocols that are rate-limited by the (FW1%M) metric to operate almost twice as fast. \c{opyright} 2022. All rights reserved.

quant-ph

Picosecond Synchronization of Photon Pairs through a Fiber Link between Fermilab and Argonne National Laboratories

We demonstrate a three-node quantum network for C-band photon pairs using 2 pairs of 59 km of deployed fiber between Fermi and Argonne National Laboratories. The C-band pairs are directed to nodes using a standard telecommunication switch and synchronized to picosecond-scale timing resolution using a coexisting O- or L-band optical clock distribution system. We measure a reduction of coincidence-to-accidental ratio (CAR) of the C-band pairs from 51 $\pm$ 2 to 5.3 $\pm$ 0.4 due to Raman scattering of the O-band clock pulses. Despite this reduction, the CAR is nevertheless suitable for quantum networks.

quant-ph

Picosecond synchronization system for quantum networks

The operation of long-distance quantum networks requires photons to be synchronized and must account for length variations of quantum channels. We demonstrate a 200 MHz clock-rate fiber optic-based quantum network using off-the-shelf components combined with custom-made electronics and telecommunication C-band photons. The network is backed by a scalable and fully automated synchronization system with ps-scale timing resolution. Synchronization of the photons is achieved by distributing O-band-wavelength laser pulses between network nodes. Specifically, we distribute photon pairs between three nodes, and measure a reduction of coincidence-to-accidental ratio from 77 to only 42 when the synchronization system is enabled, which permits high-fidelity qubit transmission. Our demonstration sheds light on the role of noise in quantum communication and represents a key step in realizing deployed co-existing classical-quantum networks.

quant-ph

Improved heralded single-photon source with a photon-number-resolving superconducting nanowire detector

Deterministic generation of single photons is essential for many quantum information technologies. A bulk optical nonlinearity emitting a photon pair, where the measurement of one of the photons heralds the presence of the other, is commonly used with the caveat that the single-photon emission rate is constrained due to a trade-off between multiphoton events and pair emission rate. Using an efficient and low noise photon-number-resolving superconducting nanowire detector we herald, in real time, a single photon at telecommunication wavelength. We perform a second-order photon correlation $g^{2}(0)$ measurement of the signal mode conditioned on the measured photon number of the idler mode for various pump powers and demonstrate an improvement of a heralded single-photon source. We develop an analytical model using a phase-space formalism that encompasses all multiphoton effects and relevant imperfections, such as loss and multiple Schmidt modes. We perform a maximum-likelihood fit to test the agreement of the model to the data and extract the best-fit mean photon number $\mu$ of the pair source for each pump power. A maximum reduction of $0.118 \pm 0.012$ in the photon $g^{2}(0)$ correlation function at $\mu = 0.327 \pm 0.007$ is obtained, indicating a strong suppression of multiphoton emissions. For a fixed $g^{2}(0) = 7e-3$, we increase the single pair generation probability by 25%. Our experiment, built using fiber-coupled and off-the-shelf components, delineates a path to engineering ideal sources of single photons.

quant-ph

Teleportation Systems Towards a Quantum Internet

Quantum teleportation is essential for many quantum information technologies including long-distance quantum networks. Using fiber-coupled devices, including state-of-the-art low-noise superconducting nanowire single photon detectors and off-the-shelf optics, we achieve quantum teleportation of time-bin qubits at the telecommunication wavelength of 1536.5 nm. We measure teleportation fidelities of >=90% that are consistent with an analytical model of our system, which includes realistic imperfections. To demonstrate the compatibility of our setup with deployed quantum networks, we teleport qubits over 22 km of single-mode fiber while transmitting qubits over an additional 22 km of fiber. Our systems, which are compatible with emerging solid-state quantum devices, provide a realistic foundation for a high-fidelity quantum internet with practical devices.

quant-ph