arXiv subjects

Andrew Szentgyorgyi

Publications and source records attributed to Andrew Szentgyorgyi.

At least 19 recordsLinked to original sources

arXiv2026

Coupling loss and transmission in a multimode fiber-fed virtually imaged phased array (VIPA)

The Virtually Imaged Phased Array (VIPA) is a spectral disperser that has seen increasing adoption across various applications, including optical telecommunications, high-resolution spectroscopy, and LiDAR. Although VIPAs are typically fed by single-mode optical fiber in these applications, there is growing interest in using a multimode optical fiber feed to enable higher throughput. However, a multimode fiber feed introduces several challenges, one of which is a fundamental limit on how much light can be coupled into a VIPA. In this work, we derive a closed-form expression for the minimum tilt angle of a multimode fiber-fed VIPA required for no etendue coupling loss, and we show that this angle depends solely on the input fiber's etendue, the focal ratio of the injection cylindrical lens, and the VIPA's intrinsic parameters. Moreover, we derive the 2D and 3D etendue that can be coupled into a VIPA, as well as the VIPA's etendue coupling efficiency and total transmission, given a particular configuration. We validate our mathematical models using ray-tracing simulations in Zemax OpticStudio non-sequential mode. Our results provide practical guidance for the design of high-throughput optical systems based on multimode fiber-fed VIPAs.

physics.optics↗

arXiv2026

Optical design of VIPER: a high-resolution multimode fiber-fed VIPA spectrograph for characterizing exoplanet atmospheric escape

We present the optical design of VIPER: a high-resolution, multimode fiber-fed, narrowband, cross-dispersed, seeing-limited spectrograph based on a Virtually Imaged Phased Array (VIPA), a spectral disperser that provides higher dispersion and a more compact form factor than conventional diffraction gratings. VIPER is specifically designed to probe exoplanet atmospheric escape through the helium 1083 nm triplet line, with a resolving power of 300,000 over a 10 nm wavelength range. VIPER is intended for operation at the 1.5 m Tillinghast Telescope at the Fred Lawrence Whipple Observatory (FLWO) on Mount Hopkins, Arizona, USA, and is matched to this telescope's 100 $μ$m circular-core multimode optical fiber feed at f/6. VIPER's optical design is specifically optimized for high throughput, which, in a VIPA spectrograph, is more challenging with a multimode fiber feed than a single-mode fiber feed because of the larger etendue. To address this challenge, our design implements a novel use of a cylindrical beam expander and pupil slicer. We validate our design using analytic calculations and simulations in Zemax OpticStudio non-sequential mode. Our results demonstrate the feasibility of multimode fiber-fed VIPA spectrographs as compact, high-throughput alternatives to conventional grating-based spectrographs for exoplanet science and other astronomical applications.

astro-ph.IM↗

arXiv2025

Crank-rocker optical fiber mode scrambler prototype for the GMT-Consortium Large Earth Finder (G-CLEF)

When coherent light propagates through a multimode optical fiber, the modes interfere at the fiber exit boundary, producing a high-contrast speckle interference pattern called modal noise. This non-uniform interference pattern introduces systematic errors in fiber-fed precision radial velocity (RV) spectrographs which are detrimental to exoplanet mass measurement. Modal noise can be mitigated by a device called a fiber mode scrambler or fiber agitator, which dynamically perturbs the fiber to change the interference pattern over time, smoothing it over long exposures. In this paper, we present a prototype optical fiber mode scrambler based on a four-bar linkage crank-rocker mechanism, developed for the GMT-Consortium Large Earth Finder (G-CLEF). G-CLEF is a fiber-fed, high-resolution, precision RV spectrograph for the Magellan Clay Telescope and Giant Magellan Telescope (GMT). To support this effort, we developed a fiber testing setup capable of imaging the near-field and far-field output of fibers and measuring focal ratio degradation. We designed, built, and tested the mode scrambler, using our setup, on step-index multimode optical fibers with various shapes, including octagonal, square, and rectangular core cross-sections. We developed custom software utilizing alpha shapes to identify the boundary of an arbitrarily shaped fiber and to compute a signal-to-noise ratio metric for quantifying modal noise. We investigated the effects of different mode scrambler parameters, such as agitation frequency, on mitigating modal noise. Our results offer valuable insights into optimizing fiber mode scrambling for precision RV spectrographs.

astro-ph.IM↗

arXiv2025

VIPER: A high-resolution multimode fiber-fed VIPA spectrograph concept for characterizing exoplanet atmospheric escape

An increasing number of applications in exoplanetary science require spectrographs with high resolution and high throughput without the need for a broad spectral range. Examples include the search for biosignatures through the detection of the oxygen A-band at 760 nm, and the study of atmospheric escape through the helium 1083 nm triplet. These applications align well with the capabilities of a spectrograph based on a Virtually Imaged Phased Array (VIPA), a high-throughput dispersive element that is essentially a modified Fabry-Perot etalon. We are developing VIPER, a high-resolution, narrowband, multimode fiber-fed VIPA spectrograph specifically designed to observe the helium 1083 nm triplet absorption line in the atmospheres of gaseous exoplanets. VIPER will achieve a resolving power of 300,000 over a wavelength range of 25 nm, and will be cross-dispersed by an echelle grating. VIPER is intended for operation on the 1.5 m Tillinghast Telescope and potentially on the 6.5 m MMT, both located at the Fred Lawrence Whipple Observatory (FLWO) on Mount Hopkins, Arizona, USA. In this paper, we present VIPER's instrument requirements, derived from the primary science goal of detecting anisotropic atmospheric escape from exoplanets. We discuss the design methodology for VIPA-based spectrographs aimed at maximizing throughput and diffraction efficiency, and we derive a wave-optics-based end-to-end model of the spectrograph to simulate the intensity distribution at the detector. We present an optical design for VIPER and highlight the potential of VIPA-based spectrographs for advancing exoplanetary science.

astro-ph.IM↗

arXiv2024

Off-axis Hartmann wavefront sensing for the GMT-Consortium Large Earth Finder (G-CLEF) red camera optics

The Hartmann test is a method used to measure the wavefront error in a focal optical system, wherein a mask with a pattern of small holes is placed at the system's aperture stop. By taking an image at a defocused plane, the differences between the ideal and real positions of the reimaged holes (called the transverse ray aberrations) can be measured, which can then be used to estimate the wavefront error. However, the Hartmann test is usually used with an on-axis field. In this paper, we present a wavefront sensing method which generalizes the classical Hartmann test for off-axis field angles and arbitrary reference wavefronts. Our method involves taking images at two defocused planes, and then using the real reimaged hole positions on both planes to estimate the trajectories of rays from the system's exit pupil, at which the reference wavefront is situated. We then propagate the rays forward from the reference wavefront to one of the two defocused planes, in order to find the ideal reimaged hole positions, from which we can compute transverse ray aberrations. We derive and solve a pair of nonlinear partial differential equations relating transverse ray aberrations to wavefront error, using Zernike decomposition and nonlinear least squares. Our method has been verified on simulated data from the 7-lens f/2.25 red camera system of the GMT-Consortium Large Earth Finder (G-CLEF), a high resolution optical echelle spectrograph which will be a first light instrument for the Giant Magellan Telescope (GMT).

astro-ph.IM↗

arXiv2023

First on-sky results of a FIOS prototype, a Fabry Perot Based Instrument for Oxygen Searches

The upcoming Extremely Large Telescopes (ELTs) are expected to have the collecting area required to detect potential biosignature gases such as molecular oxygen, $\mathrm{O_2}$, in the atmosphere of terrestrial planets around nearby stars. One of the most promising detection methods is transmission spectroscopy. To maximize our capability to detect $\mathrm{O_2}$ using this method, spectral resolutions $\mathrm{R}\geq 300,000$ are required to fully resolve the absorption lines in an Earth-like exoplanet atmosphere and disentangle the signal from telluric lines. Current high-resolution spectrographs typically achieve a spectral resolution of $\mathrm{R}\sim100,000$. Increasing the resolution in seeing limited observations/instruments requires drastically larger optical components, making these instruments even more expensive and hard to fabricate and assemble. Instead, we demonstrate a new approach to high-resolution spectroscopy. We implemented an ultra-high spectral resolution booster to be coupled in front of a high-resolution spectrograph. The instrument is based on a chained Fabry Perot array which generates a hyperfine spectral profile. We present on-sky telluric observations with a lab demonstrator. Depending on the configuration, this two-arm prototype reaches a resolution of R=250,000-350,000. After carefully modeling the prototype's behavior, we propose a Fabry Perot Interferometer (FPI) design for an eight-arm array configuration aimed at ELTs capable of exceeding R=300,000. The novel FPI resolution booster can be plugged in at the front end of an existing R=100,000 spectrograph to overwrite the spectral profile with a higher resolution for exoplanet atmosphere studies.

astro-ph.IM↗

arXiv2023

Surface pressure impact on nitrogen-dominated USP super-Earth atmospheres

In this paper, we compare the chemistry and the emission spectra of nitrogen-dominated cool, warm, and hot ultra-short-period (USP) super-Earth atmospheres in and out of chemical equilibrium at various surface pressure scenarios ranging from 0.1 to 10 bar. We link the one-dimensional VULCAN chemical kinetic code, in which thermochemical kinetic and vertical transport and photochemistry are taken into account, to the one-dimensional radiative transfer model, PETITRADTRANS, to predict the emission spectra of these planets. The radiative-convective temperature-pressure profiles were computed with the HELIOS code. Then, using PANDEXO noise simulator, we explore the observability of the differences produced by disequilibrium processes with the JWST. Our grids show how different surface pressures can significantly affect the temperature profiles, the atmospheric abundances, and consequently the emission spectra of these planets. We find that the divergences due to disequilibrium processes would be possible to observe in cooler planets by targeting HCN, C2H4, and CO, and in warmer planets by targeting CH4 with HCN, using the NIRSpec and MIRI LRS JWST instruments. These species are also found to be sensitive indicators of the existence of surfaces on nitrogen-dominated USP super-Earths, providing information regarding the thickness of these atmospheres.

astro-ph.EP↗

arXiv2020

Characterization of a multi-etalon array for ultra-high resolution spectroscopy

The upcoming Extremely Large Telescopes (ELTs) are expected to have the collecting area required to detect potential biosignature gases in the atmosphere of rocky planets around nearby low-mass stars. Some efforts are currently focusing on searching for molecular oxygen (O2), since O2 is a known biosignature on Earth. One of the most promising methods to search for O2 is transmission spectroscopy in which high-resolution spectroscopy is combined with cross-correlation techniques. In this method, high spectral resolution is required both to resolve the exoplanet's O2 lines and to separate them from foreground telluric absorption. While current astronomical spectrographs typically achieve a spectral resolution of 100,000, recent studies show that resolutions of 300,000 -- 400,000 are optimal to detect O2 in the atmosphere of earth analogs with the ELTs. Fabry Perot Interferometer (FPI) arrays have been proposed as a relatively low-cost way to reach these resolutions. In this paper, we present performance results for our 2-FPI array lab prototype, which reaches a resolving power of 600,000. We further discuss the use of multi-cavity etalons (dualons) to be resolution boosters for existing spectrographs.

astro-ph.IM↗

arXiv2019

Mapping the Stellar Halo with the H3 Spectroscopic Survey

Modern theories of galaxy formation predict that the Galactic stellar halo was hierarchically assembled from the accretion and disruption of smaller systems. This hierarchical assembly is expected to produce a high degree of structure in the combined phase and chemistry space; this structure should provide a relatively direct probe of the accretion history of our Galaxy. Revealing this structure requires precise 3D positions (including distances), 3D velocities, and chemistry for large samples of stars. The Gaia satellite is delivering proper motions and parallaxes for >1 billion stars to G~20. However, radial velocities and metallicities will only be available to G~15, which is insufficient to probe the outer stellar halo (>10 kpc). Moreover, parallaxes will not be precise enough to deliver high-quality distances for stars beyond ~10 kpc. Identifying accreted systems throughout the stellar halo therefore requires a large ground-based spectroscopic survey to complement Gaia. Here we provide an overview of the H3 Stellar Spectroscopic Survey, which will deliver precise stellar parameters and spectrophotometric distances for 200,000 stars to r=18. Spectra are obtained with the Hectochelle instrument at the MMT, which is configured for the H3 Survey to deliver resolution R~23,000 spectra covering the wavelength range 5150A-5300A. The survey is optimized for stellar halo science and therefore focuses on high Galactic latitude fields (|b|>30 deg.), sparsely sampling 15,000 sq. degrees. Targets are selected on the basis of Gaia parallaxes, enabling very efficient selection of bone fide halo stars. The survey began in the Fall of 2017 and has collected 88,000 spectra to-date. All of the data, including the derived stellar parameters, will eventually be made publicly available via the survey website: h3survey.rc.fas.harvard.edu.

astro-ph.GA↗

arXiv2019

Optimizing Ground-based Observations of O2 in Earth Analogs

We present the result of calculations to optimize the search for molecular oxygen (O2) in Earth analogs transiting around nearby, low-mass stars using ground-based, high-resolution, Doppler shift techniques. We investigate a series of parameters, namely spectral resolution, wavelength coverage of the observations, and sky coordinates and systemic velocity of the exoplanetary systems, to find the values that optimize detectability of O2. We find that increasing the spectral resolution of observations to R = 300,000 - 400,000 from the typical R ~ 100,000, more than doubles the average depth of O2 lines in planets with atmospheres similar to Earth's. Resolutions higher than about 500,000 do not produce significant gains in the depths of the O2 lines. We confirm that observations in the O2 A-band are the most efficient except for M9V host stars, for which observations in the O2 NIR-band are more efficient. Combining observations in the O2 A, B, and NIR -bands can reduce the number of transits needed to produce a detection of O2 by about 1/3 in the case of white noise limited observations. However, that advantage disappears in the presence of typical levels of red noise. Therefore, combining observations in more than one band produces no significant gains versus observing only in the A-band, unless red-noise can be significantly reduced. Blending between the exoplanet's O2 lines and telluric O2 lines is a known problem. We find that problem can be alleviated by increasing the resolution of the observations, and by giving preference to targets near the ecliptic.

astro-ph.EP↗

arXiv2019

Detecting Earth-like Biosignatures on Rocky Exoplanets around Nearby Stars with Ground-based Extremely Large Telescopes

As we begin to discover rocky planets in the habitable zone of nearby stars with missions like TESS and CHEOPS, we will need quick advancements on instrumentation and observational techniques that will enable us to answer key science questions, such as What are the atmospheric characteristics of habitable zone rocky planets? How common are Earth-like biosignatures in rocky planets?} How similar or dissimilar are those planets to Earth? Over the next decade we expect to have discovered several Earth-analog candidates, but we will not have the tools to study the atmospheres of all of them in detail. Ground-based ELTs can identify biosignatures in the spectra of these candidate exo-Earths and understand how the planets' atmospheres compare to the Earth at different epochs. Transit spectroscopy, high-resolution spectroscopy, and reflected-light direct imaging on ELTs can identify multiple biosignatures for habitable zone, rocky planets around M stars at optical to near-infrared wavelengths. Thermal infrared direct imaging can detect habitable zone, rocky planets around AFGK stars, identifying ozone and motivating reflected-light follow-up observations with NASA missions like HabEx/LUVOIR. Therefore, we recommend that the Astro2020 Decadal Survey Committee support: (1) the search for Earth-like biosignatures on rocky planets around nearby stars as a key science case; (2) the construction over the next decade of ground-based Extremely Large Telecopes (ELTs), which will provide the large aperture and spatial resolution necessary to start revealing the atmospheres of Earth-analogues around nearby stars; (3) the development of instrumentation that optimizes the detection of biosignatures; and (4) the generation of accurate line lists for potential biosignature gases, which are needed as model templates to detect those molecules.

astro-ph.EP↗

arXiv2019

Astro2020 Science White Paper: Dynamical Processes in the Planet-Forming Environment

The transfer of circumstellar disk mass and momentum onto the protostar and out into the environment occurs via a variety of mechanisms including magnetospheric accretion, jets, outflows, and disk winds. The interplay of these processes determine both the conditions under which planet formation occurs and the lifetime of the disk. Metallic emission lines, along with the Balmer series of hydrogen, probe the kinematics of gas within the planet-forming and central regions of circumstellar disks. High-spectral resolution study of these emission lines provides critical information on mass and momentum loss, turbulence, and disk wind origins.

astro-ph.SR↗

arXiv2019

Protoplanetary Disk Science Enabled by Extremely Large Telescopes

The processes that transform gas and dust in circumstellar disks into diverse exoplanets remain poorly understood. One key pathway is to study exoplanets as they form in their young ($\sim$few~Myr) natal disks. Extremely Large Telescopes (ELTs) such as GMT, TMT, or ELT, can be used to establish the initial chemical conditions, locations, and timescales of planet formation, via (1)~measuring the physical and chemical conditions in protoplanetary disks using infrared spectroscopy and (2)~studying planet-disk interactions using imaging and spectro-astrometry. Our current knowledge is based on a limited sample of targets, representing the brightest, most extreme cases, and thus almost certainly represents an incomplete understanding. ELTs will play a transformational role in this arena, thanks to the high spatial and spectral resolution data they will deliver. We recommend a key science program to conduct a volume-limited survey of high-resolution spectroscopy and high-contrast imaging of the nearest protoplanetary disks that would result in an unbiased, holistic picture of planet formation as it occurs.

astro-ph.EP↗

arXiv2018

Visible-spanning flat supercontinuum for astronomical applications

We demonstrate a broad, flat, visible supercontinuum spectrum that is generated by a dispersion-engineered tapered photonic crystal fiber pumped by a 1 GHz repetition rate turn-key Ti:sapphire laser outputting $\sim$ 30 fs pulses at 800 nm. At a pulse energy of 100 pJ, we obtain an output spectrum that is flat to within 3 dB over the range 490-690 nm with a blue tail extending below 450 nm. The mode-locked laser combined with the photonic crystal fiber forms a simple visible frequency comb system that is extremely well-suited to the precise calibration of astrophysical spectrographs, among other applications.

astro-ph.IM↗

arXiv2018

Application of Adaptive Optics for Illumination Stability in Precision Radial Velocity Measurements in Astronomical Spectroscopy

Adaptive optics (AO) have been used to correct wavefronts to achieve diffraction limited point spread functions in a broad range of optical applications, prominently ground-based astronomical telescopes operating in near infra-red. While most AO systems cannot provide diffraction-limited performance in the optical passband (400 nm - 900 nm), AO can improve image concentration, as well as both near and far field image stability, within an AO-fed spectrograph. Enhanced near and far field stability increase wavelength-scale stability in high dispersion spectrographs. In this work, we describe detailed modelling of the stability improvements achievable on extremely large telescopes. These improvements in performance may enable the mass measurement of Earth Twins by the precision radial velocity method, and the discovery of evidence of exobiotic activity in exoplanet atmospheres with the next generation of extremely large telescopes (ELTs). In this paper, we report on numerical simulations of the impact of AO on the performance of the GMT-Consortium Large Earth Finder (G-CLEF) instrument for the future Giant Magellan Telescope (GMT). The proximate cause of this study is to evaluate what improvements AO offer for exoplanet mass determination by the precision radial velocity (PRV) method and the discovery of biomarkers in exoplanet atmospheres. A modified AO system capable of achieving this improved stability even with changing conditions is proposed.

astro-ph.IM↗

arXiv2018

High Resolution Spectroscopy using Fabry Perot Intereferometer Arrays: An Application to Searches for O$_{2}$ in Exoplanetary Atmospheres

We present a novel implementation for extremely high resolution spectroscopy using custom-designed Fabry Perot Interferometer (FPI) arrays. For a given telescope aperture at the seeing limited case, these arrays can achieve resolutions well in excess of ${\rm R\sim10^5}$ using optical elements orders of magnitude smaller in size than standard echelle spectrographs of similar resolution. We apply this method specifically to the search for molecular oxygen in exoplanetary atmospheres using the ${\rm O_2}$ A-band at 0.76 ${\rm μm}$, and show how a FPI array composed of $\sim10$ etalons with parameters optimized for this science case can record ${\rm R=3-5\,\cdot10^5}$ spectra covering the full ${\rm O_2}$ A-band. Using simulated observations of the atmosphere of a transiting nearby Earth-like planet, we show how observations with a FPI array coupled to a long-slit spectrograph can reduce the number of transit observations needed to produce a ${\rm 3σ}$ detection of ${\rm O_2}$ by $\sim30\%$ compared to observations with a ${\rm R=10^5}$ echelle spectrograph. This, in turn, leads to a decrease in an observing program duration of several years. The number of transits needed for a ${\rm 3σ}$ detection can be further reduced by increasing the efficiency of FPI arrays using dualons (an etalon with a buried reflective layer), and by coupling the FPI array to a dedicated spectrograph optimized for the ${\rm O_2}$ A-band.

astro-ph.IM↗

arXiv2017

Astro-comb calibrator and spectrograph characterization using a turn-key laser frequency comb

Using a turn-key Ti:sapphire femtosecond laser frequency comb, an off-the-shelf supercontinuum device, and Fabry-Perot mode filters, we report the generation of a 16 GHz frequency comb spanning a 90 nm band about a center wavelength of 566 nm. The light from this astro-comb is used to calibrate the HARPS-N astrophysical spectrograph for precision radial velocity measurements. The comb-calibrated spectrograph achieves a stability of $\sim$ 1 cm/s within half an hour of averaging time. We also use the astro-comb as a reference for measurements of solar spectra obtained with a compact telescope, and as a tool to study intrapixel sensitivity variations on the CCD of the spectrograph.

astro-ph.IM↗

arXiv2016

State of the Field: Extreme Precision Radial Velocities

The Second Workshop on Extreme Precision Radial Velocities defined circa 2015 the state of the art Doppler precision and identified the critical path challenges for reaching 10 cm/s measurement precision. The presentations and discussion of key issues for instrumentation and data analysis and the workshop recommendations for achieving this precision are summarized here. Beginning with the HARPS spectrograph, technological advances for precision radial velocity measurements have focused on building extremely stable instruments. To reach still higher precision, future spectrometers will need to produce even higher fidelity spectra. This should be possible with improved environmental control, greater stability in the illumination of the spectrometer optics, better detectors, more precise wavelength calibration, and broader bandwidth spectra. Key data analysis challenges for the precision radial velocity community include distinguishing center of mass Keplerian motion from photospheric velocities, and the proper treatment of telluric contamination. Success here is coupled to the instrument design, but also requires the implementation of robust statistical and modeling techniques. Center of mass velocities produce Doppler shifts that affect every line identically, while photospheric velocities produce line profile asymmetries with wavelength and temporal dependencies that are different from Keplerian signals. Exoplanets are an important subfield of astronomy and there has been an impressive rate of discovery over the past two decades. Higher precision radial velocity measurements are required to serve as a discovery technique for potentially habitable worlds and to characterize detections from transit missions. The future of exoplanet science has very different trajectories depending on the precision that can ultimately be achieved with Doppler measurements.

astro-ph.IM↗