arXiv subjects

Andrey A. Knizhnik

Publications and source records attributed to Andrey A. Knizhnik.

At least 19 recordsLinked to original sources

arXiv2025

Robust structural superlubricity of twisted graphene bilayer and domain walls between commensurate moiré pattern domains from first-principles calculations

Twisted graphene layers exhibit extremely low friction for relative sliding. Nevertheless, previous studies suggest that the area contribution to friction for commensurate moiré systems is finite and might restrict macroscopic superlubricity for large layer overlaps. In this paper, we investigate the potential energy surface (PES) for relative displacement of the layers forming moiré patterns (2,1) and (3,1) by accurate density functional theory calculations using the vdW-DF3 functional. The amplitudes of PES corrugations on the order of 0.4 and 0.03 $μ$eV per atom of one layer, respectively, are obtained. The account of structural relaxation doubles this value for the (2,1) pattern, while causing only minimal changes for the (3,1) pattern. We show that different from aligned graphene layers, for moiré patterns, PES minima and maxima can switch their positions upon changing the interlayer distance. The PES shape is closely described by the first spatial Fourier harmonics both with and without account of structural relaxation. A barrier for relative rotation of the layers to an incommensurate state that can make superlubricity robust is estimated based on the approximated PES. We also derive a set of measurable physical properties related to interlayer interaction including shear mode frequency, shear modulus and static friction force. Furthermore, we predict that it should be possible to observe domain walls separating commensurate domains, each comprising a large number of moiré pattern unit cells, and provide estimates of their characteristics.

cond-mat.mes-hall↗

arXiv2024

Magnetic and electronic properties of 1D hybrid nanoobjects composed of alternating polycyclic hydrocarbon regions and double carbon chains

It has been proposed recently that 1D hybrid nanoobjects consisting of alternating double carbon chains and polycyclic carbon regions can be obtained from graphene nanoribbons of alternating width by electron irradiation. Here, based on density functional theory calculations, we show that magnetic and electronic properties of such nanoobjects can be changed dramatically by modifying the chain length and edge structure of polycyclic regions and this opens wide possibilities for spintronic applications. Nanoobjects composed of polycyclic regions with dangling bonds and even chains are found to behave as magnetic semiconductors that can generate spin-polarized currents. Band gaps of nanoobjects with odd chains change considerably upon switching between magnetic states making them promising for magnetic tunnel junctions. We also demonstrate that use of a hybrid exchange-correlation functional is important to properly describe stability of magnetic states, band gaps and synergistic effects of nanoobject components leading, for example, to magnetism in even chains.

cond-mat.mes-hall↗

arXiv2022

Optimal model of semi-infinite graphene for ab initio calculations of reactions at graphene edges by the example of zigzag edge reconstruction

We investigate how parameters of the model of semi-infinite graphene based on a graphene nanoribbon under periodic boundary conditions affect the accuracy of ab initio calculations of reactions at graphene edges by the example of the first stage of reconstruction of zigzag graphene edges, formation of a pentagon-heptagon pair. It is shown that to converge properly the results, the nanoribbon should consist of at least 6 zigzag rows and periodic images of the pair along the nanoribbon axis should be separated by at least 6 hexagons. The converged reaction energy and activation barrier for formation of an isolated pentagon-heptagon pair are found to be -0.15 eV and 1.61 eV, respectively. It is also revealed that such defects reduce the graphene edge magnetization only locally but ordering of spins at opposite nanoribbon edges switches from the antiparallel (antiferromagnetic) to parallel one (ferromagnetic) upon increasing the defect density.

cond-mat.mes-hall↗

arXiv2022

Reconstruction of Zigzag Graphene Edges: Energetics, Kinetics and Residual Defects

Ab initio calculations are performed to study consecutive reconstruction of a zigzag graphene edge. According to the obtained energy profile along the reaction pathway, the first reconstruction step, formation of the first pentagon-heptagon pair, is the slowest one, while the growth of an already nucleated reconstructed edge domain should occur steadily at a much higher rate. Domains merge into one only in 1/4 of cases when they get in contact, while in the rest of the cases, residual defects are left. Structure, energy and magnetic properties of these defects are studied. It is found that spontaneous formation of pairs of residual defects (i.e. spontaneous domain nucleation) in the fully reconstructed edge is unlikely at temperatures below 1000 K. Using a kinetic model, we show that the average domain length is of several $\mathrmμ$m at room temperature and it decreases exponentially upon increasing the temperature at which the reconstruction takes place.

cond-mat.mes-hall↗

arXiv2021

Atomic-scale defects restricting structural superlubricity: Ab initio study study on the example of the twisted graphene bilayer

The potential energy surface (PES) of interlayer interaction of twisted bilayer graphene with vacancies in one of the layers is investigated via density functional theory (DFT) calculations with van der Waals corrections. These calculations give a non-negligible magnitude of PES corrugation of 28 meV per vacancy and barriers for relative sliding of the layers of 7 - 8 meV per vacancy for the moiré pattern with coprime indices (2,1) (twist angle 21.8$^\circ$). At the same time, using the semiempirical potential fitted to the DFT results, we confirm that twisted bilayer graphene without defects exhibits superlubricity for the same moiré pattern and the magnitude of PES corrugation for the infinite bilayer is below the calculation accuracy. Our results imply that atomic-scale defects restrict the superlubricity of 2D layers and can determine static and dynamic tribological properties of these layers in a superlubric state. We also analyze computationally cheap approaches that can be used for modeling of tribological behavior of large-scale systems with defects. The adequacy of using state-of-the-art semiempirical potentials for interlayer interaction and approximations based on the first spatial Fourier harmonics for the description of interaction between graphene layers with defects is discussed.

cond-mat.mes-hall↗

arXiv2021

Healing of a hole in a carbon nanotube under electron irradiation in HRTEM

Healing of a hole in a carbon nanotube under electron irradiation in HRTEM at room temperature is demonstrated using molecular dynamics simulations with the CompuTEM algorithm. Formation of an amorphous patch is observed in all simulation runs. The amorphous patch is formed in the absence of external carbon adatoms only via reconstruction of the carbon bond network. It consists mainly of 5-, 6- and 7-membered rings and causes a small bottleneck. In addition, further growth of the initial amorphous patch under electron irradiation takes place. Two-coordinated atoms are found to play a crucial role in the latter process, analogous to autocatalisys of rearrangements of rings in fullerenes. The principal rearrangements in the presence of two-coordinated atoms can be described as generalized sp-defect migration: a bond is broken between two three-coordinated atoms and one of them forms a new bond with a nearby two-coordinated atom. If the new and former two-coordinated atoms are not bonded, the reaction leads both to displacement of the sp defect and changes in rings of the sp$^2$ carbon structure. Migration by hopping of two-coordinated atoms and other reactions involving simultaneous breakage of two bonds are also detected but much rarely. Long-living two-coordinated atoms in the patch structure and related fast growth of the patch are observed in more than half of the simulation runs. Since the amorphous patch and bottleneck affect the electronic properties of the nanotube, such nanotubes can be perspective for nanoelectronic applications.

cond-mat.mes-hall↗

arXiv2021

Transformation of a graphene nanoribbon into a hybrid 1D nanoobject with alternating double chains and polycyclic regions

Molecular dynamics simulations show that a graphene nanoribbon with alternating regions which are one and three hexagons wide can transform into a hybrid 1D nanoobject with alternating double chains and polycyclic regions under electron irradiation in HRTEM. A scheme of synthesis of such a nanoribbon using Ullmann coupling and dehydrogenation reactions is proposed. The reactive REBO-1990EVC potential is adapted for simulations of carbon-hydrogen systems and is used in combination with the CompuTEM algorithm for modeling of electron irradiation effects. The atomistic mechanism of formation of the new hybrid 1D nanoobject is found to be the following. Firstly hydrogen is removed by electron impacts. Then spontaneous breaking of bonds between carbon atoms leads to decomposition of narrow regions of the graphene nanoribbon into double chains. Simultaneously thermally activated growth of polycyclic regions occurs. Density functional theory calculations give barriers along the growth path of polycyclic regions consistent with this mechanism. Electronic properties of the new 1D nanoobject are shown to be strongly affected by the edge magnetism and make this nanostructure promising nanoelectronic and spintronic applications. The way of synthesis the 1D nanoobject proposed here can be considered as an example of the general three-stage strategy of production of nanoobjects and macromolecules. 1) precursors are synthesized by traditional chemical method, 2) precursors are placed in HRTEM with the electron energy that is sufficient only to remove hydrogen atoms, 3) as a result of hydrogen removal, the precursors become unstable or metastable and transform into new nanoobjects or macromolecules.

cond-mat.mes-hall↗

arXiv2020

Molecular Dynamics Study of sp-Defect Migration in Odd Fullerene: Possible Role in Synthesis of Abundant Isomers of Fullerenes

To explain recent experiment showing the role of odd fullerenes in formation of abundant fullerene isomers a reactive molecular dynamics (MD) study has been performed. Three types of bond rearrangement reactions are found by MD simulations at 3000 K in odd fullerenes which contain an extra sp atom among all other sp$^2$ atoms. The first type is sto-chastic sp-defect migration analogous to exchange mechanism of adatom migration on a surface. The second type cor-responds to changes in the ring configuration of the sp$^2$-structure assisted by the sp atom which can lead to annealing of seven-membered rings or separation of five-membered rings. The third type is formation of short-living one-coordinated atoms or two additional sp atoms. Annihilation of a pair of sp defects has been also observed in the MD simulations. It is shown that the frequency of sp-defect migration at a lower temperature, as estimated from performed density functional theory calculations of the barriers of sp-defect migration events, is sufficient to deliver the sp atom to defects of sp$^2$ structure during the fullerene formation time. Based on these results, we propose to supplement the self-organization paradigm of fullerene formation by the following four-stage atomistic mechanism of formation of abundant isomers of fullerenes: 1) attachment of single carbon atoms, 2) sp-defect migration to sp$^2$-structure defects, 3) sp$^2$-defect annealing assisted by the sp atom and 4) subsequent annihilation of pairs of sp defects.

cond-mat.mes-hall↗

arXiv2020

Universal description of potential energy surface of interlayer interaction in two-dimensional materials by first spatial Fourier harmonics

We propose a hypothesis that the potential energy surface (PES) of interlayer interaction in diverse 2D materials can be universally described by the first spatial Fourier harmonics. This statement (checked previously for the interactions between graphene and hexagonal boron nitride layers in different combinations) is verified in the present paper for the case of hydrofluorinated graphene (HFG) bilayer with hydrogen bonding between fluorine and hydrogen at the interlayer interface. The PES for HFG bilayer is obtained through density functional theory calculations with van der Waals corrections. An analytical expression based on the first Fourier harmonics describing the PES which corresponds to the symmetry of HFG layers is derived. It is found that the calculated PES can be described by the first Fourier harmonics with the accuracy of 3\% relative to the PES corrugation. The shear mode frequency, shear modulus and barrier for relative rotation of the layers to incommensurate states of HFG bilayer are estimated. Additionally it is shown that HFG bilayer is stable relative to the formation of HF molecules as a result of chemical reactions between the layers.

cond-mat.mes-hall↗

arXiv2019

Elastic constants of graphene: Comparison of empirical potentials and DFT calculations

The capacity of popular classical interatomic potentials to describe elastic properties of graphene is tested. The Tersoff potential, Brenner reactive bond-order potentials REBO-1990, REBO-2000, REBO-2002 and AIREBO as well as LCBOP, PPBE-G, ReaxFF-CHO and ReaxFF-C2013 are considered. Linear and non-linear elastic response of graphene under uniaxial stretching is investigated by static energy calculations. The Young's modulus, Poisson's ratio and high-order elastic moduli are verified against the reference data available from experimental measurements and ab initio studies. The density functional theory calculations are performed to complement the reference data on the effective Young's modulus and Poisson's ratio at small but finite elongations. It is observed that for all the potentials considered, the elastic energy deviates remarkably from the simple quadratic dependence already at elongations of several percent. Nevertheless, LCBOP provides the results consistent with the reference data and thus realistically describes in-plane deformations of graphene. Reasonable agreement is also observed for the computationally cheap PPBE-G potential. REBO-2000, AIREBO and REBO-2002 give a strongly non-linear elastic response with a wrong sign of the third-order elastic modulus and the corresponding results are very far from the reference data. The ReaxFF potentials drastically overestimate the Poisson's ratio. Furthermore, ReaxFF-C2013 shows a number of numerical artefacts at finite elongations. The bending rigidity of graphene is also obtained by static energy calculations for large-diameter carbon nanotubes. The best agreement with the experimental and ab initio data in this case is achieved using the REBO-2000, REBO-2002 and ReaxFF potentials. Therefore, none of the considered potentials adequately describes both in-plane and out-of-plane deformations of graphene.

cond-mat.mes-hall↗

arXiv2018

Formation of nickel-carbon heterofullerenes under electron irradiation

A way to produce new metal-carbon nanoobjects by transformation of a graphene flake with an attached transition metal cluster under electron irradiation is proposed. The transformation process is investigated by molecular dynamics simulations by the example of a graphene flake with a nickel cluster. The parameters of the nickel-carbon potential (I. V. Lebedeva et al. J. Phys. Chem. C, 2012, 116, 6572) are modified to improve description of the balance between the fullerene elastic energy and graphene edge energies in this process. The metal-carbon nanoobjects formed are found to range from heterofullerenes with a metal patch to particles consisting of closed fullerene and metal clusters linked by chemical bonds. The atomic-scale transformation mechanism is revealed by the local structure analysis. The average time of formation of nanoobjects and their lifetime under electron irradiation are estimated for experimental conditions of high-resolution transmission electron microscope (HRTEM). The sequence of images of nanostructure evolution with time during its observation by HRTEM is also modelled. Furthermore, the possibility of batch production of studied metal-carbon nanoobjects and solids based on these nanoobjects is discussed.

cond-mat.mes-hall↗

arXiv2018

Long triple carbon chains formation by heat treatment of graphene nanoribbon: Molecular dynamics study with revised Brenner potential

The method for production of atomic chains by heating of graphene nanoribbons (GNRs) is proposed and studied by molecular dynamics simulations. The Brenner potential is revised to adequately describe formation of atomic chains, edges and vacancy migration in graphene. A fundamentally different behavior is observed for zigzag-edge GNRs with 3 and 4 atomic rows (3 and 4-ZGNRs) at 2500 K: formation of triple, double and single carbon chains with the length of hundreds of atoms in 3-ZGNRs and edge reconstruction with only short chains and GNR width reduction in 4-ZGNRs. The chain formation mechanism in 3-ZGNRs is revealed by analysis of bond reorganization reactions and is based on the interplay of two processes. The first one is breaking of bonds between 3 zigzag atomic rows leading to triple chain formation. The second one is bond breaking within the same zigzag atomic row, which occurs predominantly through generation of pentagons with subsequent bond breaking in pentagons and results in single or double chain formation. The DFT calculations of the barriers for relevant reactions are consistent with the mechanism proposed. The possibility of chain-based nanoelectronic devices with a controllable number of chains is discussed.

cond-mat.mes-hall↗

arXiv2018

Comparison of performance of van der Waals-corrected exchange-correlation functionals for interlayer interaction in graphene and hexagonal boron nitride

Exchange-correlation functionals with corrections for van der Waals interactions (PBE-D2, PBE-D3, PBE-D3(BJ), PBE-TS, optPBE-vdW and vdW-DF2) are tested for graphene and hexagonal boron nitride, both in the form of bulk and bilayer. The characteristics of the potential energy surface, such as the barrier to relative sliding of the layers and magnitude of corrugation, and physically measurable properties associated with relative in-plane and out-of-plane motion of the layers including the shear modulus and modulus for axial compression, shear mode frequency and frequency of out-of-plane vibrations are considered. The PBE-D3(BJ) functional gives the best results for the stackings of hexagonal boron nitride and graphite that are known to be ground-state from the experimental studies. However, it fails to describe the order of metastable states of boron nitride in energy. The PBE-D3 and vdW-DF2 functionals, which reproduce this order correctly, are identified as the optimal choice for general studies. The vdW-DF2 functional is preferred for evaluation of the modulus for axial compression and frequency of out-of-plane vibrations, while the PBE-D3 functional is somewhat more accurate in calculations of the shear modulus and shear mode frequency. The best description of the latter properties, however, is achieved also using the vdW-DF2 functional combined with consideration of the experimental interlayer distance. In the specific case of graphene, the PBE-D2 functional works very well and can be further improved by adjustment of the parameters.

cond-mat.mes-hall↗

arXiv2018

Structure and energetics of carbon, hexagonal boron nitride and carbon/hexagonal boron nitride single-layer and bilayer nanoscrolls

Single-layer and bilayer carbon and hexagonal boron nitride nanoscrolls as well as nanoscrolls made of bilayer graphene/hexagonal boron nitride heterostructure are considered. Structures of stable states of the corresponding nanoscrolls prepared by rolling single-layer and bilayer rectangular nanoribbons are obtained based on the analytical model and numerical calculations. The lengths of nanoribbons for which stable and energetically favorable nanoscrolls are possible are determined. Barriers to rolling of single-layer and bilayer nanoribbons into nanoscrolls and barriers to nanoscroll unrolling are calculated. Based on the calculated barriers nanoscroll lifetimes in the stable state are estimated. Elastic constants for bending of graphene and hexagonal boron nitride layers used in the model are found by density functional theory calculations.

cond-mat.mes-hall↗

arXiv2017

Stacking in incommensurate graphene/hexagonal-boron-nitride heterostructures based on ab initio study of interlayer interaction

The interlayer interaction in graphene/boron-nitride heterostructures is studied using density functional theory calculations with the correction for van der Waals interactions. It is shown that the use of the experimental interlayer distance allows to describe the potential energy surface at the level of more accurate but expensive computational methods. On the other hand, it is also demonstrated that the dependence of the interlayer interaction energy on the relative in-plane position of the layers can be fitted with high accuracy by a simple expression determined by the system symmetry. The use of only two independent parameters in such an approximation suggests that various physical properties of flat graphene/boron-nitride systems are interrelated and can be expressed through these two parameters. Here we estimate some of the corresponding physical properties that can be accessed experimentally, including the correction to the period of the Moiré superstructure for the highly incommensurate ground state of graphene/boron-nitride bilayer coming from the interlayer interaction, width of stacking dislocations in slightly incommensurate systems of boron nitride on stretched graphene and shear mode frequencies for commensurate graphene/boron-nitride systems, such as a flake on a layer. We propose that the commensurate-incommensurate phase transition can be observed in boron nitride on stretched graphene and experimental measurements of the corresponding critical strain can be also used to get an insight into graphene/boron-nitride interactions.

cond-mat.mes-hall↗

arXiv2017

Edge stacking dislocations in two-dimensional bilayers with a small lattice mismatch

Incomplete stacking dislocations are predicted to form at edges of the shorter upper layer in two-dimensional hexagonal bilayers upon stretching the longer bottom layer. A concept of the edge Burgers vector is introduced to describe such dislocations by analogy with the Burgers vector of standard bulk dislocations. Analytical solutions for the structure and energy of edge stacking dislocations in bilayer graphene are obtained depending on the magnitude of elongation and angles between the edge Burgers vector, direction of elongation and edge. The barrier for penetration of stacking dislocations inside the bilayer is estimated. The possibilities to measure the barrier to relative motion of graphene layers and strain of graphene on a substrate by observation of edge stacking dislocations are discussed.

cond-mat.mes-hall↗

arXiv2017

Transformation of amorphous carbon clusters to fullerenes

Transformation of amorphous carbon clusters into fullerenes under high temperature is studied using molecular dynamics simulations at microsecond times. Based on the analysis of both structure and energy of the system, it is found that fullerene formation occurs in two stages. Firstly, fast transformation of the initial amorphous structure into a hollow sp$^2$ shell with a few chains attached occurs with a considerable decrease of the potential energy and the number of atoms belonging to chains and to the amorphous domain. Then, insertion of remaining carbon chains into the sp$^2$ network takes place at the same time with the fullerene shell formation. Two types of defects remaining after the formation of the fullerene shell are revealed: 7-membered rings and single one-coordinated atoms. One of the fullerene structures obtained contains no defects at all, which demonstrates that defect-free carbon cages can be occasionally formed from amorphous precursors directly without defect healing. No structural changes are observed after the fullerene formation, suggesting that defect healing is a slow process in comparison with the fullerene shell formation. The schemes of the revealed reactions of chain atoms insertion into the fullerene shell just before its completion are presented. The results of the performed simulations are summarized within the paradigm of fullerene formation due to selforganization of the carbon system.

cond-mat.mes-hall↗

arXiv2017

Formation of nickel clusters wrapped in carbon cages: towards new endohedral metallofullerene synthesis

In spite of the high potential of endohedral metallofullerenes (EMFs) for application in biology, medicine and molecular electronics and recent efforts in EMF synthesis, the variety of EMFs accessible by conventional synthetic methods remains limited and does not include, for example, EMFs of late transition metals. We propose a method in which EMF formation is initiated by electron irradiation in aberration-corrected high-resolution transmission electron spectroscopy (AC-HRTEM) of a metal cluster surrounded by amorphous carbon inside a carbon nanotube serving as a nano-reactor and apply this method for synthesis of nickel EMFs. The use of ACHRTEM makes it possible not only to synthesize new, previously unattainable nanoobjects but also to study in situ the mechanism of structural transformations. Molecular dynamics simulations using the state-of-the-art approach for modeling the effect of electron irradiation are performed to rationalise the experimental observations and to link the observed processes with conditions of bulk EMF synthesis.

cond-mat.mes-hall↗