arXiv subjects

Andrey B. Matsko

Publications and source records attributed to Andrey B. Matsko.

At least 37 records · Page 2Linked to original sources

arXiv2017

On fundamental diffraction limitation of finesse of a Fabry-Perot cavity

We perform a theoretical study of finesse limitations of a Fabry-Perot (FP) cavity occurring due to finite size, asymmetry, as well as imperfections of the cavity mirrors. A method of numerical simulations of the eigenvalue problem applicable for both the fundamental and high order cavity modes is suggested. Using this technique we find spatial profile of the modes and their round-trip diffraction loss. The results of the numerical simulations and analytical calculations are nearly identical when we consider a conventional FP cavity. The proposed numerical technique has much broader applicability range and is valid for any FP cavity with arbitrary non-spherical mirrors which have cylindrical symmetry but disturbed in an asymmetric way, for example, by tilt or roughness of their mirrors.

physics.optics↗

arXiv2017

On sensitivity limitations of a dichromatic optical detection of a classical mechanical force

We apply the strategy of the back action evading measurement of a quadrature component of mechanical motion of a test mass to detection of a classical force acting on the mass (Science, 209, (1980) 547) and study both classical and quantum limitations of the technique. We are considering a resonant displacement transducer interrogated with a dichromatic optical pump as a model system in this study. The transducer is represented by a Fabry Perot cavity with a totally reflecting movable end mirror the resonant force of interest acts upon. The cavity is pumped with two coherent optical carriers equally detuned from one of the cavity resonances. We show that the quantum back action cannot be completely excluded from the measurement result due to the dynamic instability of the opto-mechanical system that either limits the allowable power of the optical pump or calls for introducing an asymmetry to the pump configuration destroying the quantum nondemolition nature of the measurement.

quant-ph↗

arXiv2017

Optical Lattice Trap for Kerr Solitons

We show theoretically and numerically that dichromatic pumping of a nonlinear microresonator by two continuous wave coherent optical pumps creates an optical lattice trap that results in the localization of intra-cavity Kerr solitons with soliton positions defined by the beat frequency of the pumps. This phenomenon corresponds to the stabilization of the Kerr frequency comb repetition rate. The locking of the second pump, through adiabatic tuning of its frequency, to the comb generated by the first pump allows transitioning to single-soliton states, manipulating the position of Kerr solitons in the cavity, and tuning the frequency comb repetition rate within the locking range. It also explains soliton crystal formation in resonators supporting a dispersive wave emitted as a result of higher-order group velocity dispersion or avoided mode crossing. We show that dichromatic pumping by externally stabilized pumps can be utilized for stabilization of microresonator-based optical frequency combs when the comb span does not cover an octave or a significant fraction thereof and standard self-referencing techniques cannot be employed. Our findings have significant ramifications for high-precision applications of optical frequency combs in spectrally pure signal generation, metrology, and timekeeping.

nlin.PS↗

arXiv2017

Microresonator-stabilized extended cavity diode laser for supercavity frequency stabilization

We demonstrate a simple, compact, and cost-effective laser noise reduction method for stabilizing an extended cavity diode laser to a 3x105 finesse mirror Fabry-Pérot (F-P) cavity corresponding to resonance linewidth of 10 kHz using a crystalline MgF2 whispering gallery mode microresonator (WGMR). The laser linewidth is reduced to sub-kHz such that a stable Pound-Drever-Hall (PDH) error signal is built up. The wavelength of the pre-stabilized laser is tunable within a large bandwidth covering the high reflection mirror coating of a F-P supercavity.

physics.optics↗

arXiv2017

Chasing the thermodynamical noise limit in whispering-gallery-mode resonators for ultrastable laser frequency stabilization

Ultrastable high-spectral-purity lasers have served as the cornerstone behind optical atomic clocks, quantum measurements, precision optical-microwave generation, high resolution optical spectroscopy and sensing. Hertz-level lasers stabilized to high finesse Fabry-Pérot mirror cavities are typically used for these studies but are large and fragile such that they have remained laboratory instruments. There is a clear demand in rugged miniaturized lasers operating potentially at comparable stabilities to those bulk lasers. Over the past decade, ultrahigh-Q optical whispering-gallery-mode (WGM) resonators have served as a platform for low-noise microlasers but have not yet reached the ultimate stabilities defined by their fundamental noise. Here, we show the noise characteristics of WGM resonators and demonstrate a resonator-stabilized laser at the fundamental limit by compensating the intrinsic thermal expansion of a WGM resonator, allowing a sub-25 Hz linewidth and a 32 Hz Allan deviation on the 191 THz carrier in 100 ms integration. We also reveal the environmental sensitivities of the resonator at the thermodynamical noise limit and long-term frequency drifts governed by random-walk-noise statistics.

physics.optics↗

arXiv2016

High-contrast Kerr Frequency Combs

Kerr frequency combs with depressed harmonic at the optical pump frequency are theoretically explained and experimentally demonstrated. This result is achieved in a MgF$_2$ photonic belt resonator having reduced density of modes in its spectrum and configured with the add-drop optical couplers. ©2016 California Institute of Technology. Government sponsorship

physics.optics↗

arXiv2016

Nonlinear and Quantum Optics with Whispering Gallery Resonators

Optical Whispering Gallery Modes (WGMs) derive their name from a famous acoustic phenomenon of guiding a wave by a curved boundary observed nearly a century ago. This phenomenon has a rather general nature, equally applicable to sound and all other waves. It enables resonators of unique properties attractive both in science and engineering. Very high quality factors of optical WGM resonators persisting in a wide wavelength range spanning from radio frequencies to ultraviolet light, their small mode volume, and tunable in- and out- coupling make them exceptionally efficient for nonlinear optical applications. Nonlinear optics facilitates interaction of photons with each other and with other physical systems, and is of prime importance in quantum optics. In this paper we review numerous applications of WGM resonators in nonlinear and quantum optics. We outline the current areas of interest, summarize progress, highlight difficulties, and discuss possible future development trends in these areas.

physics.optics↗

arXiv2016

A stabilized chip-scale Kerr frequency comb via a high-Q reference photonic microresonator

We stabilize a chip-scale Si3N4 phase-locked Kerr frequency comb via locking the pump laser to an independent stable high-Q reference microresonator and locking the comb spacing to an external microwave oscillator. In this comb, the pump laser shift induces negligible impact on the comb spacing change. This scheme is a step towards miniaturization of the stabilized Kerr comb system as the microresonator reference can potentially be integrated on-chip. Fractional instability of the optical harmonics of the stabilized comb is limited by the microwave oscillator used for comb spacing lock below 1 s averaging time and coincides with the pump laser drift in the long term.

physics.optics↗

arXiv2015

Optical Gravitational Wave Antenna with Increased Power Handling Capability

Fundamental sensitivity of an optical interferometric gravitational wave detector increases with increase of the optical power which, in turn, limited because of the opto-mechanical parametric instabilities of the interferometer. We propose to optimize geometrical shape of the mirrors of the detector to reduce the diffraction-limited finesse of unessential optical modes of the interferometer resulting in increase of the threshold of the opto-mechanical instabilities and subsequent increase of the measurement sensitivity. Utilizing parameters of the LIGO interferometer we found that the proposed technique allows constructing a Fabry-Perot interferometer with round trip diffraction loss of the fundamental mode not exceeding $5$~ppm, whereas the loss of the first dipole as well as the other high order modes exceed $1,000$~ppm and $8,000$~ppm, respectively. The optimization comes at the price of tighter tolerances on the mirror tilt stability, but does not result in a significant modification of the optical beam profile and does not require changes in the the gravity detector read-out system. The cavity with proposed mirrors is also stable with respect to the slight modification of the mirror shape.

gr-qc↗

arXiv2015

Enabling Arbitrary Wavelength Optical Frequency Combs on Chip

A necessary condition for generation of bright soliton Kerr frequency combs in microresonators is to achieve anomalous group velocity dispersion (GVD) for the resonator modes. This condition is hard to implement in visible as well as ultraviolet since the majority of optical materials are characterized with large normal GVD in these wavelength regions. We overcome this challenge by borrowing ideas from strongly dispersive coupled systems in solid state physics and optics. We show that photonic compound ring resonators can possess large anomalous GVD at any desirable wavelength, even if each individual resonator is characterized with normal GVD. Based on this concept we design a mode locked frequency comb with thin-film silicon nitride compound ring resonators in the vicinity of Rubidium D1 line (794.6nm) and propose to use this optical comb as a flywheel for chip-scale optical clocks.

physics.optics↗

arXiv2015

Generation of Kerr combs centered at 4.5μm in crystalline microresonators pumped by quantum cascade lasers

We report on the generation of mid-infrared Kerr frequency combs in high-finesse CaF$_2$ and MgF$_2$ whispering-gallery mode resonators pumped with continuous wave room temperature quantum cascade lasers. The combs were centered at 4.5$μ$m, the longest wavelength to date. A frequency comb wider than a half of an octave was demonstrated when approximately 20mW of pump power was coupled to an MgF2 resonator characterized with quality factor exceeding 10$^8$.

physics.optics↗

arXiv2014

Feshbach Resonances in Kerr Frequency Combs

We show that both the power and repetition rate of a frequency comb generated in a nonlinear ring resonator, pumped with continuous wave (cw) coherent light, are modulated. The modulation is brought about by the interaction of the cw background with optical pulses excited in the resonator, and occurs in resonators with nonzero high-order chromatic dispersion and wavelength-dependent quality factor. The modulation frequency corresponds to the detuning of the pump frequency from the eigenfrequency of the pumped mode in the resonator.

physics.optics↗

arXiv2014

Noise conversion in Kerr comb RF photonic oscillators

Transfer of amplitude and phase noise from a continuous wave optical pump to the repetition rate of a Kerr frequency comb is studied theoretically, with focus on generation of spectrally pure radio frequency (RF) signals via demodulation of the frequency comb on a fast photodiode. It is shown that both the high order chromatic dispersion of the resonator spectrum and frequency-dependent quality factor of the resonator modes facilitate the optical-to-RF noise conversion that limits spectral purity of the RF signal.

physics.optics↗

arXiv2014

Generation of a coherent near-infrared Kerr frequency comb in a monolithic microresonator with normal GVD

We demonstrate experimentally, and explain theoretically, generation of a wide, fundamentally phase locked Kerr frequency comb in a nonlinear resonator with a normal group velocity dispersion. A magnesium fluoride whispering gallery resonator characterized with 10 GHz free spectral range and pumped either at 780 nm or 795 nm is used in the experiment. The envelope of the observed frequency comb differs significantly from the Kerr frequency comb spectra reported previously. We show via numerical simulation that, while the frequency comb does not correspond to generation of short optical pulses, the relative phases of the generated harmonics are fixed.

physics.optics↗

arXiv2014

On limitation of quality factor of single mode resonators with finite size

Using realistic numerical models we analyze radiative loss of bound and unbound modes of specially designed high-Q whispering gallery and Fabry-Perot cavities of similar size and shape, and find a set of parameters when they can be treated as single mode structures. We show that these cavities have similar properties in spite of their different loss mechanisms. The cavity morphology engineering does not lead to reduction of the resonator quality factor.

physics.optics↗

arXiv2012

Chaotic dynamics of frequency combs generated with continuously pumped nonlinear microresonators

We theoretically and experimentally investigate the chaotic regime of optical frequency combs generated in nonlinear ring microresonators pumped with continuous wave light. We show that the chaotic regime reveals itself, in an apparently counter-intuitive way, by a flat top symmetric envelope of the frequency spectrum, when observed by means of an optical spectrum analyzer. The comb demodulated on a fast photodiode produces a noisy radio frequency signal with an spectral width significantly exceeding the linear bandwidth of the microresonator mode.

physics.optics↗

arXiv2011

RF-Photonic Frequency Stability Gear Box

An optical technique based on stability transfer among modes of a monolithic optical microresonator is proposed for long therm frequency stabilization of a radiofrequency (RF) oscillator. We show that locking two resonator modes, characterized with dissimilar sensitivity in responding to an applied forcing function, to a master RF oscillator allows enhancing the long term stability of a slave RF oscillator locked to two resonator modes having nearly identical sensitivity. For instance, the stability of a 10 MHz master oscillator characterized with Allan deviation of 10^-7 at 10^4s can be increased and transferred to a slave oscillator with identical stability performance, so that the resultant Allan deviation of the slave oscillator becomes equal to 10-13 at 10^4s. The method does not require absolute frequency references to achieve such a performance.

physics.optics↗

arXiv2011

Generation of Kerr Frequency Combs in Resonators with Normal GVD

We show via numerical simulation that Kerr frequency combs can be generated in a nonlinear resonator characterized with normal group velocity dispersion (GVD). We find the spectral shape of the comb and temporal envelope of the corresponding optical pulses formed in the resonator.

physics.optics↗