arXiv subjects

Andrey Matsko

Publications and source records attributed to Andrey Matsko.

9 recordsLinked to original sources

arXiv2025

Ultralow noise microwaves with free-running frequency combs and electrical feedforward

Optically generated microwave signals exhibit some of the lowest phase noise and timing jitter of any microwave-generating technology to date. The success of octave-spanning optical frequency combs in down-converting ultrastable optical frequency references has motivated the development of compact, robust and highly manufacturable optical systems that maintain the ultralow microwave phase noise of their tabletop counterparts. Two-point optical frequency division using chip-scale components and ~1 THz-spanning microcombs has been quite successful, but with stringent requirements on the comb source's free-running noise and feedback control dynamics. Here we introduce a major simplification of this architecture that replaces feedback control of the frequency comb in favor of electronic feedforward noise cancelation that significantly relaxes the comb requirements. Demonstrated with both a high repetition rate solid-state mode-locked laser and a microcomb, feedforward on a 10 GHz carrier results in more robust operation with phase noise as low as -153 dBc/Hz at offsets >10 kHz, femtosecond timing jitter, and elimination of the large "servo bump" noise increase at high offset frequency. The system's compatibility with a variety of highly manufacturable mode-locked laser designs and its resilience and straightforward implementation represents an important step forward towards a fully chip-scale implementation of optically generated microwaves, with applications in radar, sensing, and position, navigation and timing.

physics.optics↗

arXiv2025

Light shift suppression in a CPT magnetometer using linear polarization and double frequency interrogation

We demonstrate a suppression of the light shift in a Coherent-Population-Trapping (CPT) atomic magnetometer by using linearly polarized light and a differential measurement between magnetic resonances. The radio frequency that creates the optical sidebands for CPT quickly switches between two magnetic sensitive transitions and the magnetic field is extrapolated from the difference of the center frequencies of the magnetic resonances. Light shifts and common drifts like collisional shifts can be suppressed through careful choice of measured resonances and we show the light shift reduction by more than a factor of 20 compared to excitation with circular polarized light. Various limitations to the method are discussed.

physics.atom-ph↗

arXiv2025

Kerr nonlinearity, self-injection locking and correlation in a microresonator

Production of entangled photon pairs is important in secure communication systems, quantum computing, and fundamental physics experiments. Achieving efficient generation of such photon pairs with low-loss parametric oscillators is a key objective in advancing integrated quantum technologies. However, spatially separating the generated photons while preserving their entanglement represents a significant technical challenge. In this work, we demonstrate nonlinear generation of correlated optical harmonics based on non-degenerate four-wave mixing with an optimally pumped optical microcavity with Kerr nonlinearity. The phase matching of the process is achieved with self-injection locked lasers producing parametric oscillation while locked to two different modes of the microresonator. This condition is reminiscent of slow-light technique developed for coherent atomic systems. The experimental design, utilizing counterpropagating light from two self-injection locked lasers, also effectively addresses the challenge of spatial separation of the generated harmonics. We validate the theoretical predictions using two self-injection locked semiconductor lasers integrated with a crystalline whispering gallery mode resonator with optimized spectral structure.

physics.optics↗

arXiv2024

Towards Timetronics with Photonic Systems

Periodic driving of particles can create crystalline structures in their dynamics. Such systems can be used to study solid-state physics phenomena in the time domain. In addition, it is possible to realize photonic time crystals and to engineer the wave-number band structure of optical devices by periodic temporal modulation of the properties of light-propagating media. Here we introduce a versatile approach which uses traveling wave resonators to emulate various condensed matter phases in the time dimension. This is achieved by utilizing temporal modulation of the permittivity and the shape of small segments of the resonators. The required frequency and depth of the modulation are experimentally achievable which opens a pathway for the practical realisation of crystalline structures in time in microwave and in optical systems.

physics.optics↗

arXiv2024

Dispersive-wave-agile optical frequency division

The remarkable frequency stability of resonant systems in the optical domain (optical cavities and atomic transitions) can be harnessed at frequency scales accessible by electronics using optical frequency division. This capability is revolutionizing technologies spanning time keeping to high-performance electrical signal sources. A version of the technique called 2-point optical frequency division (2P-OFD) is proving advantageous for application to high-performance signal sources. In 2P-OFD, an optical cavity anchors two spectral endpoints defined by lines of a frequency comb. The comb need not be self-referenced, which greatly simplifies the system architecture and reduces power requirements. Here, a 2P-OFD microwave signal source is demonstrated with record-low phase noise using a microcomb. Key to this advance is a spectral endpoint defined by a frequency agile single-mode dispersive wave that is emitted by the microcomb soliton. Moreover, the system frequency reference is a compact all-solid-state optical cavity with a record Q-factor. The results advance integrable microcomb-based signal sources into the performance realm of much larger microwave sources.

physics.optics↗

arXiv2023

Mirror-assisted tuning of laser stabilization via self-injection locking to WGM microresonator

Self-injection locking is a dynamic phenomenon which provides passive stabilization of a lasers emission frequency via resonant optical feedback. The stabilization coefficient depends on the level of resonant feedback and quality factor of the external resonant structure creating the feedback. Usually a self-injection locked laser (SIL) involves barely tunable resonant Rayleigh scattering (RRS). In this work we study theoretically a scheme of a SIL to a high-Q microresonator with drop-port coupled mirror, in which optical feedback level is optimally adjusted by the tuning the drop-port mirror coupling. We show that the additional reflector can improve the laser stabilization and power handling efficiency if compared with the classic RRS-based scheme.

physics.optics↗

arXiv2023

Photonic chip-based low noise microwave oscillator

Numerous modern technologies are reliant on the low-phase noise and exquisite timing stability of microwave signals. Substantial progress has been made in the field of microwave photonics, whereby low noise microwave signals are generated by the down-conversion of ultra-stable optical references using a frequency comb. Such systems, however, are constructed with bulk or fiber optics and are difficult to further reduce in size and power consumption. Our work addresses this challenge by leveraging advances in integrated photonics to demonstrate low-noise microwave generation via two-point optical frequency division. Narrow linewidth self-injection locked integrated lasers are stabilized to a miniature Fabry-Pérot cavity, and the frequency gap between the lasers is divided with an efficient dark-soliton frequency comb. The stabilized output of the microcomb is photodetected to produce a microwave signal at 20 GHz with phase noise of -96 dBc/Hz at 100 Hz offset frequency that decreases to -135 dBc/Hz at 10 kHz offset--values which are unprecedented for an integrated photonic system. All photonic components can be heterogeneously integrated on a single chip, providing a significant advance for the application of photonics to high-precision navigation, communication and timing systems.

physics.optics↗

arXiv2022

Parametrically driven inertial sensing in chip-scale optomechanical cavities at the thermodynamical limits with extended dynamic range

Recent scientific and technological advances have enabled the detection of gravitational waves, autonomous driving, and the proposal of a communications network on the Moon (Lunar Internet or LunaNet). These efforts are based on the measurement of minute displacements and correspondingly the forces or fields transduction, which translate to acceleration, velocity, and position determination for navigation. State-of-the-art accelerometers use capacitive or piezo resistive techniques, and micro-electromechanical systems (MEMS) via integrated circuit (IC) technologies in order to drive the transducer and convert its output for electric readout. In recent years, laser optomechanical transduction and readout have enabled highly sensitive detection of motional displacement. Here we further examine the theoretical framework for the novel mechanical frequency readout technique of optomechanical transduction when the sensor is driven into oscillation mode [8]. We demonstrate theoretical and physical agreement and characterize the most relevant performance parameters with a device with 1.5mg/Hz acceleration sensitivity, a 2.5 fm/Hz1/2 displacement resolution corresponding to a 17.02 ug/Hz1/2 force-equivalent acceleration, and a 5.91 Hz/nW power sensitivity, at the thermodynamical limits. In addition, we present a novel technique for dynamic range extension while maintaining the precision sensing sensitivity. Our inertial accelerometer is integrated on-chip, and enabled for packaging, with a laser-detuning-enabled approach.

eess.SY↗

arXiv2017

Orthogonally Polarized Kerr Frequency Combs

Kerr optical frequency combs with multi-gigahertz spacing have previously been demonstrated in chip-scale microresonators, with potential applications in coherent communication, spectroscopy, arbitrary waveform generation, and radio frequency photonic oscillators. In general, the harmonics of a frequency comb are identically polarized in a single microresonator. In this work, we report that one comb in one polarization is generated by an orthogonally polarized soliton comb and two low-noise, orthogonally polarized combs interact with each other and exist simultaneously in a single microresonator. The second comb generation is attributed to the strong cross-phase modulation with the orthogonally polarized soliton comb and the high peak power of the intracavity soliton pulse. Experimental results show that a second frequency comb is excited even when a continuous wave light as a "seed"-with power as low as 0.1 mW-is input, while its own power level is below the threshold of comb generation. Moreover, the second comb has a concave envelope, which is different from the sech2 envelope of the soliton comb. This is due to the frequency mismatch between the harmonics and the resonant frequency. We also find that the repetition rates of these two combs coincide, although two orthogonal resonant modes are characterized by different free spectral ranges.

physics.optics↗