arXiv subjects

Andrey Turchanin

Publications and source records attributed to Andrey Turchanin.

At least 37 records · Page 2Linked to original sources

arXiv2022

Gas transport mechanisms through molecularly thin membranes

Atomically thin molecular carbon nanomembranes (CNMs) with intrinsic sub-nanometer porosity are considered as promising candidates for next generation filtration and gas separation applications due to their extremely low thickness, energy efficiency and selectivity. CNMs are intrinsically porous which is advantageous over other 2D materials such as graphene and transition metal dichalcogenides where defects and pores need to be introduced after synthesis. It was already discovered that water and helium permeate through 4,4-terphenylthiol (TPT) CNM above the limit of detection. Additionally, the permeation of water vapour was nonlinear against its pressure and 1000 stronger than permeation of helium despite their similar kinetic diameters. However, there was no clear permeation mechanism which could explain permeation of both species. Here, we demonstrate that permeation of all gas species is defined by their adsorption. We performed gas permeation measurements through TPT CNM at different temperatures and found that all measured gases experienced an activation energy barrier which correlated with their kinetic diameters. Furthermore, we identified that entropy loss during adsorption and permeation is the fundamental reason of strong nonlinear permeation of water. Our results also demonstrated that adsorption plays a major role in permeation of all gases, not just water.

cond-mat.mes-hall↗

arXiv2022

Direct Growth of Monolayer MoS$_2$ on Nanostructured Silicon Waveguides

We report for the first time the direct growth of Molybdenum disulfide (MoS$_2$) monolayers on nanostructured silicon-on-insulator waveguides. Our results indicate the possibility of utilizing the Chemical Vapour Deposition (CVD) on nanostructured photonic devices in a scalable process. Direct growth of 2D material on nanostructures rectifies many drawbacks of the transfer-based approaches. We show that the van der Waals materials grow conformally across the curves, edges, and the silicon-SiO$_2$ interface of the waveguide structure. Here, the waveguide structure used as a growth substrate is complex not just in terms of its geometry but also due to the two materials (Si and SiO$_2$) involved. A transfer-free method like this yields a novel approach for functionalizing nanostructured, integrated optical architectures with an optically active direct semiconductor.

physics.app-ph↗

arXiv2022

Tuning nanowire lasers via hybridization with two-dimensional materials

Mixed dimensional hybrid structures have recently gained increasing attention as promising building blocks for novel electronic and optoelectronic devices. In this context, hybridization of semiconductor nanowires with two-dimensional materials could offer new ways to control and modulate lasing at the nanoscale. In this work, we deterministically fabricate hybrid mixed-dimensional heterostructures composed of ZnO nanowires and MoS2 monolayers with micrometer control over their relative position. First, we show that our deterministic fabrication method does not degrade the optical properties of the ZnO nanowires. Second, we demonstrate that the lasing wavelength of ZnO nanowires can be tuned by several nanometers by hybridization with CVD-grown MoS2 monolayers. We assign this spectral shift of the lasing modes to an efficient carrier transfer at the heterointerface and the subsequent increase of the optical band gap in ZnO (Moss-Burstein effect).

physics.optics↗

arXiv2022

One pot chemical vapor deposition of high optical quality large area monolayer Janus transition metal dichalcogenides

We report one-pot chemical vapor deposition (CVD) growth of large-area Janus SeMoS monolayers, with the asymmetric top (Se) and bottom (S) chalcogen atomic planes with respect to the central transition metal (Mo) atoms. The formation of these two-dimensional semiconductor monolayers takes place upon the thermodynamic equilibrium-driven exchange of the bottom Se atoms of the initially grown MoSe2 single crystals on gold foils with S atoms. The growth process is characterized by complementary experimental techniques including Raman and X-ray photoelectron spectroscopy and the growth mechanisms are rationalized by first principle calculations. The remarkably high optical quality of the synthesized Janus monolayers is demonstrated by optical and magneto-optical measurements which reveal the strong exciton-phonon coupling and enable to obtain the exciton g-factor of -3.3.

cond-mat.mtrl-sci↗

arXiv2022

Exciton spectroscopy and diffusion in MoSe2-WSe2 lateral heterostructures encapsulated in hexagonal boron nitride

Chemical vapor deposition (CVD) allows lateral edge epitaxy of transition metal dichalcogenide heterostructures with potential applications in optoelectronics. Critical for carrier and exciton transport is the quality of the two materials that constitute the monolayer and the nature of the lateral heterojunction. Important details of the optical properties were inaccessible in as-grown heterostructure samples due to large inhomogeneous broadening of the optical transitions. Here we perform optical spectroscopy at T = 4 K and also at 300 K to access the optical transitions in CVD grown MoSe2-WSe2 lateral heterostructures that are transferred from the growth-substrate and are encapsulated in hBN. Photoluminescence (PL), reflectance contrast and Raman spectroscopy reveal considerably narrowed optical transition linewidth similar to high quality exfoliated monolayers. In high-resolution transmission electron microscopy (HRTEM) we find near-atomically sharp junctions with a typical extent of 3nm for the covalently bonded MoSe2-WSe2. In PL imaging experiments we find effective excitonic diffusion length that are longer for WSe2 than for MoSe2 at low T=4 K, whereas at 300 K this trend is reversed.

cond-mat.mtrl-sci↗

arXiv2022

Signatures of multi-band effects in high-harmonic generation in monolayer MoS$_2$

High-harmonic generation (HHG) in solids has been touted as a way to probe ultrafast dynamics and crystal symmetries in condensed matter systems. Here, we investigate the polarization properties of high-order harmonics generated in monolayer MoS$_2$, as a function of crystal orientation relative to the mid-infrared laser field polarization. At several different laser wavelengths we experimentally observe a prominent angular shift of the parallel-polarized odd harmonics for energies above approximately 3.5 eV, and our calculations indicate that this shift originates in subtle differences in the recombination dipole strengths involving multiple conduction bands. This observation is material specific and is in addition to the angular dependence imposed by the dynamical symmetry properties of the crystal interacting with the laser field, and may pave the way for probing the vectorial character of multi-band recombination dipoles.

cond-mat.mtrl-sci↗

arXiv2021

All-optical polarization and amplitude modulation of second-harmonic generation in atomically thin semiconductors

Second-harmonic generation is of paramount importance in several fields of science and technology, including frequency conversion, self-referencing of frequency combs, nonlinear spectroscopy and pulse characterization. Advanced functionalities are enabled by modulation of the harmonic generation efficiency, which can be achieved with electrical or all-optical triggers. Electrical control of the harmonic generation efficiency offers large modulation depth at the cost of low switching speed, by contrast to all-optical nonlinear devices, which provide high speed and low modulation depth. Here we demonstrate all-optical modulation of second-harmonic generation in MoS2 with a modulation depth of close to 100% and speed limited only by the fundamental pulse duration. This result arises from a combination of D3h crystal symmetry and the deep subwavelength thickness of the sample, it can therefore be extended to the whole family of transition metal dichalcogenides to provide great flexibility in the design of advanced nonlinear optical devices such as high-speed integrated frequency converters, broadband autocorrelators for ultrashort pulse characterization, and tunable nanoscale holograms.

physics.optics↗

arXiv2021

Tuning exciton recombination rates in doped transition metaldichalcogenides

Monolayer transition metal dichalcogenides (TMDs) are direct gap semiconductors that hold great promise for advanced applications in photonics and optoelectronics. Understanding the interplay between their radiative and non-radiative recombination pathways is thus of crucial importance not only for fundamental studies but also for the design of future nanoscale on-chip devices. Here, we investigate the interplay between doping and exciton-exciton annihilation (EEA) and their impact on the photoluminescence quantum yield in different TMD samples and related heterostructures. We demonstrate that the EEA threshold increases in highly doped samples, where the radiative and non-radiative recombination of trions dominates.

cond-mat.mes-hall↗

arXiv2021

In-fiber second-harmonic generation with embedded two-dimensional materials

Silica-based optical fibers are a workhorse of nonlinear optics. They have been used to demonstrate nonlinear phenomena such as solitons and self-phase modulation. Since the introduction of the photonic crystal fiber, they have found many exciting applications, such as supercontinuum white light sources and third-harmonic generation, among others. They stand out by their low loss, large interaction length, and the ability to engineer its dispersive properties, which compensate for the small chi(3) nonlinear coefficient. However, they have one fundamental limitation: due to the amorphous nature of silica, they do not exhibit second-order nonlinearity, except for minor contributions from surfaces. Here, we demonstrate significant second-harmonic generation in functionalized optical fibers with a monolayer of highly nonlinear MoS2 deposited on the fiber guiding core. The demonstration is carried out in a 3.5 mm short piece of exposed core fiber, which was functionalized in a scalable process CVD-based process, without a manual transfer step. This approach is scalable and can be generalized to other transition metal dichalcogenides and other waveguide systems. We achieve an enhancement of more than 1000x over a reference sample of equal length. Our simple proof-of-principle demonstration does not rely on either phase matching to fundamental modes, or ordered growth of monolayer crystals, suggesting that pathways for further improvement are within reach. Our results do not just demonstrate a new path towards efficient in-fiber SHG-sources, instead, they establish a platform with a new route to chi(2)-based nonlinear fiber optics, optoelectronics, and photonics platforms, integrated optical architectures, and active fiber networks.

physics.optics↗

arXiv2020

Scalable functionalization of optical fibers using atomically thin semiconductors

Atomically thin transition metal dichalcogenides are highly promising for integrated optoelectronic and photonic systems due to their exciton-driven linear and nonlinear interaction with light. Integrating them into optical fibers yields novel opportunities in optical communication, remote sensing, and all-fiber optoelectronics. However, scalable and reproducible deposition of high quality monolayers on optical fibers is a challenge. Here, we report the chemical vapor deposition of monolayer MoS2 and WS2 crystals on the core of microstructured exposed core optical fibers and their interaction with the fibers' guided modes. We demonstrate two distinct application possibilities of 2D-functionalized waveguides to exemplify their potential. First, we simultaneously excite and collect excitonic 2D material photoluminescence with the fiber modes, opening a novel route to remote sensing. Then we show that third harmonic generation is modified by the highly localized nonlinear polarization of the monolayers, yielding a new avenue to tailor nonlinear optical processes in fibers. We anticipate that our results may lead to significant advances in optical fiber based technologies.

physics.app-ph↗

arXiv2020

Proton and Li-Ion Permeation through Graphene with Eight-Atom-Ring Defects

Defect-free graphene is impermeable to gases and liquids but highly permeable to thermal protons. Atomic-scale defects such as vacancies, grain boundaries and Stone-Wales defects are predicted to enhance graphene's proton permeability and may even allow small ions through, whereas larger species such as gas molecules should remain blocked. These expectations have so far remained untested in experiment. Here we show that atomically thin carbon films with a high density of atomic-scale defects continue blocking all molecular transport, but their proton permeability becomes ~1,000 times higher than that of defect-free graphene. Lithium ions can also permeate through such disordered graphene. The enhanced proton and ion permeability is attributed to a high density of 8-carbon-atom rings. The latter pose approximately twice lower energy barriers for incoming protons compared to the 6-atom rings of graphene and a relatively low barrier of ~0.6 eV for Li ions. Our findings suggest that disordered graphene could be of interest as membranes and protective barriers in various Li-ion and hydrogen technologies.

cond-mat.mtrl-sci↗

arXiv2020

Controlling interlayer excitons in MoS2 layers grown by chemical vapor deposition

Combining MoS$_2$ monolayers to form multilayers allows to access new functionalities. In this work, we examine the correlation between the stacking order and the interlayer coupling of valence states in MoS$_2$ homobilayer samples grown by chemical vapor deposition (CVD) and artificially stacked bilayers from CVD monolayers. We show that hole delocalization over the bilayer is allowed in 2H stacking and results in strong interlayer exciton absorption and also in a larger A-B exciton separation as compared to 3R bilayers, where both holes and electrons are confined to the individual layers. Comparing 2H and 3R reflectivity spectra allows to extract an interlayer coupling energy of about $t_\perp=49$ meV. Obtaining very similar results for as-grown and artificially stacked bilayers is promising for assembling large area van der Waals structures with CVD material, using interlayer exciton absorption and A-B exciton separation as indicators for interlayer coupling. Beyond DFT calculations including excitonic effects confirm signatures of efficient interlayer coupling for 2H stacking in agreement with our experiments.

cond-mat.mtrl-sci↗

arXiv2019

Accessing high optical quality of MoS2 monolayers grown by chemical vapor deposition

Chemical vapor deposition (CVD) allows growing transition metal dichalcogenides (TMDs) over large surface areas on inexpensive substrates. In this work, we correlate the structural quality of CVD grown MoS$_2$ monolayers (MLs) on SiO$_2$/Si wafers studied by high-resolution transmission electron microscopy (HRTEM) with high optical quality revealed in optical emission and absorption from cryogenic to ambient temperatures. We determine a defect concentration of the order of 10$^{13}$ cm$^{-2}$ for our samples with HRTEM. To have access to the intrinsic optical quality of the MLs, we remove the MLs from the SiO$_2$ growth substrate and encapsulate them in hBN flakes with low defect density, to reduce the detrimental impact of dielectric disorder. We show optical transition linewidth of 5 meV at low temperature (T=4 K) for the free excitons in emission and absorption. This is comparable to the best ML samples obtained by mechanical exfoliation of bulk material. The CVD grown MoS$_2$ ML photoluminescence is dominated by free excitons and not defects even at low temperature. High optical quality of the samples is further confirmed by the observation of excited exciton states of the Rydberg series. We optically generate valley coherence and valley polarization in our CVD grown MoS$_2$ layers, showing the possibility for studying spin and valley physics in CVD samples of large surface area.

cond-mat.mes-hall↗

arXiv2018

Large-area fabrication of low- and high-spatial-frequency laser-induced periodic surface structures on carbon fibers

The formation and properties of laser-induced periodic surface structures (LIPSS) were investigated on carbon fibers under irradiation of fs-laser pulses characterized by a pulse duration $τ$ = 300 fs and a laser wavelength $λ$ = 1025 nm. The LIPSS were fabricated in an air environment at normal incidence with different values of the laser peak fluence and number of pulses per spot. The morphology of the generated structures was characterized by using scanning electron microscopy, atomic force microscopy and Fast-Fourier transform analyses. Moreover, the material structure and the surface chemistry of the carbon fibers before and after laser irradiation was analyzed by micro Raman spectroscopy and X-ray photoelectron spectroscopy. Large areas in the cm$^{2}$ range of carbon fiber arrangements were successfully processed with homogenously distributed high- and low-spatial frequency LIPSS. Beyond those distinct nanostructures, hybrid structures were realized for the very first time by a superposition of both types of LIPSS in a two-step process. The findings facilitate the fabrication of tailored LIPSS-based surface structures on carbon fibers that could be of particular interest for e.g. fiber reinforced polymers and concretes.

cond-mat.mtrl-sci↗

arXiv2018

Lateral heterostructures of two-dimensional materials by electron-beam induced stitching

We present a novel methodology to synthesize two-dimensional (2D) lateral heterostructures of graphene and MoS2 sheets with molecular carbon nanomembranes (CNMs), which is based on electron beam induced stitching. Monolayers of graphene and MoS2 were grown by chemical vapor deposition (CVD) on copper and SiO2 substrates, respectively, transferred onto gold/mica substrates and patterned by electron beam lithography or photolithography. Self-assembled monolayers (SAMs) of aromatic thiols were grown on the gold film in the areas where the 2D materials were not present. An irradiation with a low energy electron beam was employed to convert the SAMs into CNMs and simultaneously stitching the CNM edges to the edges of graphene and MoS2, therewith forming a heterogeneous but continuous film composed of two different materials. The formed lateral heterostructures possess a high mechanical stability, enabling their transfer from the gold substrate onto target substrates and even the preparation as freestanding sheets. We characterized the individual steps of this synthesis and the structure of the final heterostructures by complementary analytical techniques including optical microscopy, Raman spectroscopy, atomic force microscopy (AFM), helium ion microscopy (HIM), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM) and find that they possess nearly atomically sharp boundaries.

cond-mat.mes-hall↗

arXiv2016

An atomically thin matter-wave beamsplitter

Matter-wave interferometry has become an essential tool in studies on the foundations of quantum physics and for precision measurements. Mechanical gratings have played an important role as coherent beamsplitters for atoms, molecules and clusters since the basic diffraction mechanism is the same for all particles. However, polarizable objects may experience van der Waals shifts when they pass the grating walls and the undesired dephasing may prevent interferometry with massive objects. Here we explore how to minimize this perturbation by reducing the thickness of the diffraction mask to its ultimate physical limit, i.e. the thickness of a single atom. We have fabricated diffraction masks in single-layer and bilayer graphene as well as in 1 nm thin carbonaceous biphenyl membrane. We identify conditions to transform an array of single layer graphene nanoribbons into a grating of carbon nanoscrolls. We show that all these ultra-thin nanomasks can be used for high-contrast quantum diffraction of massive molecules. They can be seen as a nanomechanical answer to the question debated by Bohr and Einstein whether a softly suspended double slit would destroy quantum interference. In agreement with Bohr's reasoning we show that quantum coherence prevails even in the limit of atomically thin gratings.

quant-ph↗

arXiv2014

Functional single-layer graphene sheets from aromatic monolayers

We demonstrate how self-assembled monolayers of aromatic molecules on copper substrates can be converted into high-quality single-layer graphene using low-energy electron irradiation and subsequent annealing. We characterize this two-dimensional solid state transformation on the atomic scale and study the physical and chemical properties of the formed graphene sheets by complementary microscopic and spectroscopic techniques and by electrical transport measurements. As substrates we successfully use Cu(111) single crystals and the technologically relevant polycrystalline copper foils.

cond-mat.mes-hall↗

arXiv2014

All-carbon vertical van der Waals heterostructures: Non-destructive functionalization of graphene for electronic applications

We present a route to non-destructive functionalization of graphene via assembly of vertical all-carbon van der Waals heterostructures. To this end, we employ singlelayer graphene (SLG) sheets grown by low-pressure methane CVD on Cu foils and large-area dielectric ~1 nm thick amino-terminated carbon nanomembranes (NH2-CNMs) generated by electron-beam-induced crosslinking of aromatic self-assembled monolayers. We encapsulate SLG sheets on oxidized silicon wafers with NH2-CNMs via mechanical stacking and characterize structural, chemical and electronic properties of the formed heterostructures by Raman spectroscopy and X-ray photoelectron spectroscopy as well as by electric and electromagnetic transport measurements. We show that functional amino groups are brought in close vicinity of the SLG sheets and that their transport characteristics are not impaired by this functionalization; moreover, we demonstrate a functional response of the heterostructure devices to the protonation of the amino groups in water. Due to its relative simplicity, the suggested approach opens broad avenues for implementations in graphene-based electronic devices where non-destructive chemical functionalization of graphene is required (e.g., for engineering electrical transducers for chemical and bio-sensing) or as complementary dielectric to graphene in hieratical heterostructures.

cond-mat.mes-hall↗