arXiv subjects

Andriy Zakutayev

Publications and source records attributed to Andriy Zakutayev.

At least 73 records · Page 4Linked to original sources

arXiv2020

$Mg_xZn_{1-x}O$ contact to $CuGa_3Se_5$ absorber for photovoltaic and photoelectrochemical devices

$CuGa_3Se_5$ is a promising candidate material with wide band gap for top cells in tandem photovoltaic (PV) and photoelectrochemical (PEC) devices. However, traditional CdS contact layers used with other chalcopyrite absorbers are not suitable for $CuGa_3Se_5$ due to the higher position of its conduction band minimum. $Mg_xZn_{1-x}O$ is a transparent oxide with adjustable band gap and conduction band position as a function of magnesium composition, but its direct application is hindered by $CuGa_3Se_5$ surface oxidation. Here, $Mg_xZn_{1-x}O$ is investigated as a contact (n-type buffer or window) material to $CuGa_3Se_5$ absorbers pretreated in $Cd^{2+}$ solution, and an onset potential close to 1 V vs RHE in 10 mM hexaammineruthenium (III) chloride electrolyte is demonstrated. The $Cd^{2+}$ surface treatment changes the chemical composition and electronic structure of the $CuGa_3Se_5$ surface, as demonstrated by photoelectron spectroscopy measurements. The performance of $CuGa_3Se_5$ absorber with $Cd^{2+}$ treated surface in the solid-state test structure depends on the Zn/Mg ratio in the $Mg_xZn_{1-x}O$ layer. The measured open circuit voltage close to 1 V is promising for tandem PEC water splitting with $CuGa_3Se_5$/$Mg_xZn_{1-x}O$ top cells.

cond-mat.mtrl-sci↗

arXiv2020

Growth and Characterization of Homoepitaxial $β$-Ga$_2$O$_3$ Layers

$β$-Ga$_2$O$_3$ is a next-generation ultra wide bandgap semiconductor (E$_g$ = 4.8 eV to 4.9 eV) that can be homoepitaxially grown on commercial substrates, enabling next-generation power electronic devices among other important applications. Analyzing the quality of deposited homoepitaxial layers used in such devices is challenging, in part due to the large probing depth in traditional x-ray diffraction (XRD) and also due to the surface-sensitive nature of atomic force microscopy (AFM). Here, a combination of evanescent grazing-incidence skew asymmetric XRD and AFM are investigated as an approach to effectively characterize the quality of homoepitaxial $β$-Ga$_2$O$_3$ layers grown by molecular beam epitaxy at a variety of Ga/O flux ratios. Accounting for both structure and morphology, optimal films are achieved at a Ga/O ratio of $\sim$1.15, a conclusion that would not be possible to achieve by either XRD or AFM methods alone. Finally, fabricated Schottky barrier diodes with thicker homoepitaxial layers are characterized by $J-V$ and $C-V$ measurements, revealing an unintentional doping density of 4.3 $\times$ 10$^{16}$ cm$^{-3}$ - 2 $\times$ 10$^{17}$ cm$^{-3}$ in the epilayer. These results demonstrate the importance of complementary measurement methods for improving the quality of the $β$-Ga$_2$O$_3$ homoepitaxial layers used in power electronic and other devices.

physics.app-ph↗

arXiv2020

Thin Film Growth Effects on Electrical Conductivity in Entropy Stabilized Oxides

Entropy stabilization has garnered significant attention as a new approach to designing novel materials. Much of the work in this area has focused on bulk ceramic processing, leaving entropy-stabilized thin films relatively underexplored. Following an extensive multi-variable investigation of polycrystalline (Mg$_{0.2}$Co$_{0.2}$Ni$_{0.2}$Cu$_{0.2}$Zn$_{0.2}$)O thin films deposited via pulsed laser deposition (PLD), it is shown here that substrate temperature and deposition pressure have strong and repeatable effects on film texture and lattice parameter. Further analysis shows that films deposited at lower temperatures and under lower oxygen chamber pressure are $\sim$40x more electrically conductive than otherwise identical films grown at higher temperature and pressure. This electronic conductivity is hypothesized to be the result of polaron hopping mediated by transition metal valence changes which compensate for oxygen off-stoichiometry.

cond-mat.mtrl-sci↗

arXiv2020

Synthesis of tunable $SnS-TaS_2$ nanoscale superlattices

Nanoscale superlattices represent a compelling platform for designed materials as the specific identity and spatial arrangement of constituent layers can lead to tunable properties. A number of kinetically-stabilized layered chalcogenide nanocomposites have taken inspiration from misfit compounds, a thermodynamically stable class of materials formed of van der Waals-bonded (vdW) layers. This class of vdW heterostructure superlattices have been reported in telluride and selenide chemistries, but have not yet been extended to sulfides. Here we present $SnS-TaS_2$ nanoscale superlattices with tunable layer architecture. Thin films are prepared from layered amorphous precursors and deposited to mimic the targeted superlattice; subsequent low temperature annealing activates self-assembly into designed nanocomposites. Structure and composition for materials are investigated that span stacking sequences between $[(SnS)_{1+δ}]_3(TaS_2)_1$ and $(SnS)_7(TaS_2)_1$ using x-ray diffraction, x-ray fluorescence, and transmission electron microscopy. A graded deposition approach is implemented to stabilize heterostructures of multiple stacking sequences with a single preparation. Precise control over the architecture of such nanoscale superlattices is a critical path towards controlling the properties of quantum materials and constituent devices.

cond-mat.mtrl-sci↗

arXiv2020

Wide band gap chalcogenide semiconductors

Wide band gap semiconductors are essential for today's electronic devices and energy applications due to their high optical transparency, as well as controllable carrier concentration and electrical conductivity. There are many categories of materials that can be defined as wide band gap semiconductors. The most intensively investigated are transparent conductive oxides (TCOs) such as ITO and IGZO used in displays, carbides and nitrides used in power electronics, as well as emerging halides (e.g. CuI) and 2D electronic materials used in various optoelectronic devices. Chalcogen-based (S, Se, Te) wide band gap semiconductors are less heavily investigated but stand out due to their propensity for p-type doping, high mobilities, high valence band positions (i.e. low ionization potentials), and broad applications in electronic devices such as CdTe solar cells. This manuscript provides a review of wide band gap chalcogenide semiconductors. First, we outline general materials design parameters of high performing transparent conductors. We proceed to summarize progress in wide band gap (Eg > 2 eV) chalcogenide materials, such as II-VI MCh binaries, CuMCh2 chalcopyrites, Cu3MCh4 sulvanites, mixed anion layered CuMCh(O,F), and 2D materials, among others, and discuss computational predictions of potential new candidates in this family, highlighting their optical and electrical properties. We finally review applications of chalcogenide wide band gap semiconductors, e.g. photovoltaic and photoelectrochemical solar cells, transparent transistors, and diodes, that employ wide band gap chalcogenides as either an active or passive layer. By examining, categorizing, and discussing prospective directions in wide band gap chalcogenides, this review aims to inspire continued research on this emerging class of transparent conductors and to enable future innovations for optoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2020

Synthesis of ferroelectric LaWN3 -- the first nitride perovskite

Next generation telecommunication technologies would benefit from strong piezoelectric and ferroelectric response in materials that are compatible with nitride radio-frequency electronic devices. Ferroelectric oxides with perovskite structure have been used in sensors and actuators for half a century, and halide perovskites transformed photovoltaics research in the past decade, but neither of them is compatible with nitride semiconductors. Nitride perovskites, despite numerous computational predictions, have not been experimentally demonstrated and their properties remain unknown. Here we report the experimental realization of the first nitride perovskite: lanthanum tungsten nitride (LaWN3). Oxygen-free LaWN3 thin films in a polar perovskite structure are confirmed by spectroscopy, scattering, and microscopy techniques. Scanning probe measurements confirm a large piezoelectric response and strongly suggest ferroelectric behavior, making it the first stable nitride ferroelectric compound. These results should lead to integration of LaWN3 with nitride semiconductors for wireless telecommunication applications, while enabling synthesis of many other predicted nitride perovskites.

cond-mat.mtrl-sci↗

arXiv2019

Oxygen Reduction Reaction and X-ray Photoelectron Spectroscopy of Sputtered Fe-N-C Films

Electrocatalysts for the oxygen reduction reaction (ORR) based on complexes of iron and nitrogen in a carbon matrix (Fe-N-C) are a promising alternative to platinum group metal (PGM) based catalysts in polymer electrolyte membrane (PEM) fuel cells. Further improvements of Fe-N-C catalysts would benefit from model thin film studies of activity and stability of catalytic sites, but synthesis of Fe-N-C model thin films is challenging. Here we report on synthesis and characterization of Fe-N-C thin films produced by co-sputtering iron and carbon in a reactive nitrogen atmosphere onto removable glassy carbon rotating disk electrode (RDE) tips. Scanning electron microscopy (SEM) measurements indicate that the Fe-N-C films deposited at high temperature are smoother than the films annealed at high temperature. ORR activity measured on the thin Fe-N-C films is greater for both high-temperature samples than for the room-temperature sample. From the analysis of X-ray photoelectron spectroscopy (XPS) data, exposure of the films to high temperatures results in increased graphitization of the carbon with the Fe-N-C films, and increased relative amount of graphitic and hydrogenated nitrogen species. Overall the results of this study demonstrate the feasibility of a thin film model system approach for studying active sites in PGM-free catalysts.

cond-mat.mtrl-sci↗

arXiv2019

High-throughput fabrication and semi-automated characterization of oxide thin film transistors

High throughput experimental methods are known to accelerate the rate of research, development, and deployment of electronic materials. For example, thin films with lateral gradients in composition, thickness, or other parameters have been used alongside spatially-resolved characterization to assess how various physical factors affect material properties under varying measurement conditions. Similarly, multi-layer electronic devices that contain such graded thin films as one or more of their layers can also be characterized spatially in order to optimize the performance. In this work, we apply these high throughput experimental methods to thin film transistors (TFTs), demonstrating combinatorial device fabrication and semi-automated characterization using sputtered Indium-Gallium-Zinc-Oxide (IGZO) TFTs as a case study. We show that both extrinsic and intrinsic types of device gradients can be generated in a TFT library, such as channel thickness and length, channel cation compositions, and oxygen atmosphere during deposition. We also present a semi-automated method to measure the 44 devices fabricated on a 50x50mm substrate that can help to identify properly functioning TFTs in the library and finish the measurement in a short time. Finally, we propose a fully automated characterization system for similar TFT libraries, which can be coupled with high throughput data analysis. These results demonstrate that high throughput methods can accelerate the investigation of TFTs and other electronic devices.

physics.app-ph↗

arXiv2019

Thin film synthesis of semiconductors in the Mg-Sb-N materials system

Nitrides feature many interesting properties, such as a wide range of bandgaps suitable for optoelectronic devices including light-emitting diodes (LEDs), and piezoelectric response used in microelectromechanical systems (MEMS). Nitrides are also significantly underexplored compared to oxides and other chemistries, with many being thermochemically metastable, sparking interest from a basic science point of view. This paper reports on experimental and computational exploration of the Mg-Sb-N material system, featuring both metastable materials and interesting semiconducting properties. Using sputter deposition, we discovered a new Mg2SbN3 nitride with a wurtzite-derived crystal structure and synthesized the antimonide-nitride Mg3SbN with an antiperovskite crystal structure for the first time in thin film form. Theoretical calculations indicate that Mg2SbN3 is metastable and has properties relevant to LEDs and MEMS, whereas Mg3SbN has a large dielectric constant (28ε_0) and low hole effective masses (0.9m_0), of interest for photovoltaic solar cell absorbers. The experimental solar-matched 1.3 eV optical absorption onset of the Mg3SbN antiperovskite agrees with the theoretical prediction (1.3 eV direct, 1.1 eV indirect), and with the measurements of room-temperature near-bandgap photoluminescence. These results make an important contribution towards understanding semiconductor properties and chemical trends in the Mg-Sb-N materials system, paving the way to future practical applications of these novel materials.

cond-mat.mtrl-sci↗

arXiv2019

COMBIgor: data analysis package for combinatorial materials science

Combinatorial experiments involve synthesis of sample libraries with lateral composition gradients requiring spatially-resolved characterization of structure and properties. Due to maturation of combinatorial methods and their successful application in many fields, the modern combinatorial laboratory produces diverse and complex data sets requiring advanced analysis and visualization techniques. In order to utilize these large data sets to uncover new knowledge, the combinatorial scientist must engage in data science. For data science tasks, most laboratories adopt common-purpose data management and visualization software. However, processing and cross-correlating data from various measurement tools is no small task for such generic programs. Here we describe COMBIgor, a purpose-built open-source software package written in the commercial Igor Pro environment, designed to offer a systematic approach to loading, storing, processing, and visualizing combinatorial data sets. It includes (1) methods for loading and storing data sets from combinatorial libraries, (2) routines for streamlined data processing, and (3) data analysis and visualization features to construct figures. Most importantly, COMBIgor is designed to be easily customized by a laboratory, group, or individual in order to integrate additional instruments and data-processing algorithms. Utilizing the capabilities of COMBIgor can significantly reduce the burden of data management on the combinatorial scientist.

cond-mat.mtrl-sci↗

arXiv2018

Ternary Nitride Semiconductors in the Rocksalt Crystal Structure

Inorganic nitrides with wurtzite crystal structures are well-known semiconductors used in optoelectronic devices. In contrast, rocksalt-based nitrides are known for their metallic and refractory properties. Breaking this dichotomy, here we report on ternary nitride semiconductors with rocksalt crystal structures, remarkable optoelectronic properties, and the general chemical formula Mg$_{x}$TM$_{1-x}$N (TM=Ti, Zr, Hf, Nb). These compounds form over a broad metal composition range and our experiments show that Mg-rich compositions are nondegenerate semiconductors with visible-range optical absorption onsets (1.8-2.1 eV). Lattice parameters are compatible with growth on a variety of substrates, and epitaxially grown MgZrN$_{2}$ exhibits remarkable electron mobilities approaching 100 cm$^{2}$V$^{-1}$s$^{-1}$. Ab initio calculations reveal that these compounds have disorder-tunable optical properties, large dielectric constants and low carrier effective masses that are insensitive to disorder. Overall, these experimental and theoretical results highlight Mg$_{G-3}$TMN$_{G-2}$ rocksalts as a new class of semiconductor materials with promising properties for optoelectronic applications.

cond-mat.mtrl-sci↗

arXiv2018

A Map of the Inorganic Ternary Metal Nitrides

Exploratory synthesis in novel chemical spaces is the essence of solid-state chemistry. However, uncharted chemical spaces can be difficult to navigate, especially when materials synthesis is challenging. Nitrides represent one such space, where stringent synthesis constraints have limited the exploration of this important class of functional materials. Here, we employ a suite of computational materials discovery and informatics tools to construct a large stability map of the inorganic ternary metal nitrides. Our map clusters the ternary nitrides into chemical families with distinct stability and metastability, and highlights hundreds of promising new ternary nitride spaces for experimental investigation--from which we experimentally realized 7 new Zn- and Mg-based ternary nitrides. By extracting the mixed metallicity, ionicity, and covalency of solid-state bonding from the DFT-computed electron density, we reveal the complex interplay between chemistry, composition, and electronic structure in governing large-scale stability trends in ternary nitride materials.

cond-mat.mtrl-sci↗

arXiv2018

Enhanced piezoelectric response of AlN via CrN alloying

Since AlN has emerged as an important piezoelectric material for a wide variety of applications, efforts have been made to increase its piezoelectric response via alloying with transition metals that can substitute for Al in the wurtzite lattice. Herein, we report density functional theory calculations of structure and properties of the Cr-AlN system for Cr concentrations ranging past the wurtzite-rocksalt transition point. By studying the different contributions to the longitudinal piezoelectric coefficient, we propose that the physical origin of the enhanced piezoelectricity in Cr$_x$Al$_{1-x}$N alloys is the increase of the internal parameter $u$ of the wurtzite structure upon substitution of Al with the larger Cr ions. Among a set of wurtzite-structured materials, we have found that Cr-AlN has the most sensitive piezoelectric coefficient with respect to alloying concentration. Based on these results, we propose that Cr-AlN is a viable piezoelectric material whose properties can be tuned via Cr composition; we support this proposal by combinatorial synthesis experiments, which show that Cr can be incorporated in the AlN lattice up to 30\% before a detectable transition to rocksalt occurs. At this Cr content, the piezoelectric modulus $d_{33}$ is approximately four times larger than that of pure AlN. This finding, combined with the relative ease of synthesis, may propel Cr-AlN as the prime piezoelectric material for applications such as resonators and acoustic wave generators.

cond-mat.mtrl-sci↗

arXiv2016

Pathway to oxide photovoltaics via band-structure engineering of SnO

The prospects of scaling current photovoltaic technologies to terawatt levels remain uncertain. All-oxide photovoltaics could open rapidly scalable manufacturing routes, if only oxide materials with suitable electronic and optical properties were developed. A potential candidate material is tin monoxide (SnO), which has exceptional doping and transport properties among oxides, but suffers from a low adsorption coefficient due to its strongly indirect band gap. Here, we address this shortcoming of SnO by band-structure engineering through isovalent but heterostructural alloying with divalent cations (Mg, Ca, Sr, Zn). Using first-principles calculations, we show that suitable band gaps and optical properties close to that of direct-gap semiconductors are achievable in such SnO based alloys. Due to the defect tolerant electronic structure of SnO, the dispersive band-structure features and comparatively small effective masses are preserved in the alloys. Initial Sn1-xZnxO thin films deposited by sputtering exhibit crystal structure and optical properties in accord with the theoretical predictions, which confirms the feasibility of the alloying approach. Thus, the implications of this work are important not only for terawatt scale photovoltaics, but also for other large-scale energy technologies where defect-tolerant semiconductors with high quality electronic properties are required.

cond-mat.mtrl-sci↗

arXiv2016

Synthesis of a mixed-valent tin nitride and considerations of its possible crystal structures

Recent advances in theoretical structure prediction methods and high-throughput computational techniques are revolutionizing experimental discovery of the thermodynamically stable inorganic materials. Metastable materials represent a new frontier for studies, since even simple binary non ground state compounds of common elements may be awaiting discovery. However, there are significant research challenges related to non-equilibrium thin film synthesis and crystal structure predictions, such as small strained crystals in the experimental samples and energy minimization based theoretical algorithms. Here we report on experimental synthesis and characterization, as well as theoretical first-principles calculations of a previously unreported mixed-valent binary tin nitride. Thin film experiments indicate that this novel material is N-deficient SnN with tin in the mixed II/IV valence state and a small low-symmetry unit cell. Theoretical calculations suggest that the most likely crystal structure has the space group 2 (SG2) related to the distorted delafossite (SG166), which is nearly 0.1 eV/atom above the ground state SnN polymorph. This observation is rationalized by the structural similarity of the SnN distorted delafossite to the chemically related Sn3N4 spinel compound, which provides a fresh scientific insight into the reasons for growth of polymorphs of the metastable material. In addition to reporting on the discovery of the simple binary SnN compound, this paper illustrates a possible way of combining a wide range of advanced characterization techniques with the first-principle property calculation methods, to elucidate the most likely crystal structure of the previously unreported metastable materials.

cond-mat.mtrl-sci↗

arXiv2016

Understanding and Control of Bipolar Doping in Copper Nitride

Semiconductor materials that can be doped both n-type and p-type are desirable for diode-based applications and transistor technology. Copper nitride (Cu3N) is a metastable semiconductor with a solar-relevant bandgap that has been reported to exhibit bipolar doping behavior. However, deeper understanding and better control of the mechanism behind this behavior in Cu3N is currently lacking in the literature. In this work, we use combinatorial growth with a temperature gradient to demonstrate both conduction types of phase-pure, sputter-deposited Cu3N thin films. Room temperature Hall effect and Seebeck effect measurements show n-type Cu3N with 10^17 electrons/cm^3 for low growth temperature (~35 degrees C) and p-type with 10^15-10^16 holes/cm^3 for elevated growth temperatures (50-120 degrees C). Mobility for both types of Cu3N was ~0.1-1 cm^2/Vs. Additionally, temperature- dependent Hall effect measurements indicate that ionized defects are an important scattering mechanism in p-type films. By combining X-ray absorption spectroscopy and first-principles defect theory, we determined that V_Cu defects form preferentially in p-type Cu3N while Cu_i defects form preferentially in n-type Cu3N. Based on these theoretical and experimental results, we propose a kinetic defect formation mechanism for bipolar doping in Cu3N, that is also supported by positron annihilation experiments. Overall, the results of this work highlight the importance of kinetic processes in the defect physics of metastable materials, and provide a framework that can be applied when considering the properties of such materials in general.

cond-mat.mtrl-sci↗

arXiv2015

Effects of Low Temperature Annealing on the Transport Properties of Zinc Tin Nitride

ZnSnN2 has recently garnered increasing interest as a potential solar absorber material due to its direct bandgap that is predicted to be tunable from 1.0-2.1 eV based on cation disorder. One important challenge to the further development of this material for photovoltaics (PV) is to reliably synthesize films with carrier density less than or equal to 10^17 electrons/cm^3. In this work, we perform a systematic annealing study on compositionally-graded Zn-Sn-N thin films to determine the effects on carrier density and transport of such post-growth treatment. We find that annealing up to 6 hr under an activated nitrogen atmosphere results in a reduction in carrier density by ~80% for zinc-rich films, and by ~50% for stoichiometric films. However, we also find that annealing reduces mobility as a function of increasing annealing time. This result suggests that initial film disorder hampers the benefits to film quality that should have been gained through annealing. This finding highlights that carefully managed initial growth conditions will be necessary to obtain PV-quality ZnSnN2 absorber films.

cond-mat.mtrl-sci↗

arXiv2015

Combinatorial Insights into Doping Control and Transport Properties of Zinc Tin Nitride

ZnSnN2 is an Earth-abundant analog to the III-Nitrides with potential as a solar absorber due to its direct bandgap, steep absorption onset, and disorder-driven bandgap tunability. Despite these desirable properties, discrepancies in the fundamental bandgap and degenerate \emph{n}-type carrier density have been prevalent issues in the limited amount of literature available on this material. Using a combinatorial RF co-sputtering approach, we have been able to explore a growth-temperature-composition space for Zn(1+x)Sn(1-x)N(2) over the ranges 35-340 degrees C and 0.30-0.75 Zn/(Zn+Sn). In this way, we were able to identify an optimal set of deposition parameters for obtaining as-deposited films with wurtzite crystal structure and carrier density as low as 1.8 x 10^(18) cm^(-3). Films grown at 230 degrees C with Zn/(Zn+Sn) = 0.60 were found to have the largest grain size overall (70 nm diameter on average) while also exhibiting low carrier density (3 x 10^(18) cm^(-3)) and high mobility (8.3 cm^(2) V^(-1) s^(-1)). Furthermore, we report evidence of a Burstein-Moss shift widening the apparent bandgap as cation composition becomes increasingly Sn-rich, and tunable carrier density as a function of cation composition (lower carrier density for higher Zn content), which suggests the formation of defect complexes. Collectively, these findings provide important insight into the fundamental properties of the Zn-Sn-N material system, and also highlight the potential to utilize ZnSnN2 for photovoltaics.

cond-mat.mtrl-sci↗