Searcharxiv⌕ Search

arXiv subjects

Andrzej Krasinski

Publications and source records attributed to Andrzej Krasinski.

15 recordsLinked to original sources

Imitating accelerated expansion of the Universe by matter inhomogeneities - corrections of some misunderstandings

A number of misunderstandings about modeling the apparent accelerated expansion of the Universe, and about the `weak singularity' are clarified: 1. Of the five definitions of the deceleration parameter given by Hirata and Seljak (HS), only $q_1$ is a correct invariant measure of acceleration/deceleration of expansion. The $q_3$ and $q_4$ are unrelated to acceleration in an inhomogeneous model. 2. The averaging over directions involved in the definition of $q_4$ does not correspond to what is done in observational astronomy. 3. HS's equation (38) connecting $q_4$ to the flow invariants gives self-contradictory results when applied at the centre of symmetry of the Lema\^ıtre-Tolman (L-T) model. The intermediate equation (31) that determines $q_{3'}$ is correct, but approximate, so it cannot be used for determining the sign of the deceleration parameter. Even so, at the centre of symmetry of the L-T model, it puts no limitation on the sign of $q_{3'}(0)$. 4. The `weak singularity' of Vanderveld {\it et al.} is a conical profile of mass density at the centre - a perfectly acceptable configuration. 5. The so-called `critical point' in the equations of the `inverse problem' for a central observer in an L-T model is a manifestation of the apparent horizon - a common property of the past light cones in zero-lambda L-T models, perfectly manageable if the equations are correctly integrated.

gr-qc↗

More examples of structure formation in the Lemaitre-Tolman model

In continuing our earlier research, we find the formulae needed to determine the arbitrary functions in the Lemaitre-Tolman model when the evolution proceeds from a given initial velocity distribution to a final state that is determined either by a density distribution or by a velocity distribution. In each case the initial and final distributions uniquely determine the L-T model that evolves between them, and the sign of the energy-function is determined by a simple inequality. We also show how the final density profile can be more accurately fitted to observational data than was done in our previous paper. We work out new numerical examples of the evolution: the creation of a galaxy cluster out of different velocity distributions, reflecting the current data on temperature anisotropies of CMB, the creation of the same out of different density distributions, and the creation of a void. The void in its present state is surrounded by a nonsingular wall of high density.

gr-qc↗

Physical and Geometrical Interpretation of the epsilon <= 0 Szekeres Models

We study the properties and behaviour of the quasi-pseudospherical and quasi-planar Szekeres models, obtain the regularity conditions, and analyse their consequences. The quantities associated with "radius" and "mass" in the quasi-spherical case must be understood in a different way for these cases. The models with pseudospherical foliation can have spatial maxima and minima, but no origins. The "mass" and "radius" functions may be one increasing and one decreasing without causing shell crossings. This case most naturally describes a snake-like, variable density void in a more gently varying inhomogeneous background, although regions that develop an overdensity are also possible. The Szekeres models with plane foliation can have neither spatial extrema nor origins, cannot be spatially flat, and they cannot have more inhomogeneity than the corresponding Ellis model, but a planar surface can be the boundary between regions of spherical and pseudospherical foliation.

gr-qc↗

Avoidance of singularities in spherically symmetric charged dust

In spherically symmetric charged dust, just like in electrically neutral dust, two kinds of singularity may be present: the Big Bang/Crunch (BB/BC) singularity, and shell crossings. Quite unlike in neutral dust, the BB/BC singularity may be avoided. When the absolute value of the charge density r is everywhere small compared to the mass-energy density d (|r| < D = \sqrt{G} d / c^2), the conditions that allow the model to avoid the BB/BC singularity necessarily lead to shell crossings. There exist sets of initial conditions that allow us to avoid both singularities (when either |r| > D everywhere, or |r| = D at the center of symmetry while |r| < D elsewhere). In those cases, both kinds of singularity may be avoided for a sufficiently long period that a body of charged dust may go through the tunnel between the singularities in the maximally extended Reissner -- Nordstrom spacetime, to emerge into another asymptotically flat region. An explicit example of such a configuration is presented and discussed. It does not contradict any astrophysical constraints.

gr-qc↗

Alternative Methods of Describing Structure Formation in the Lemaitre-Tolman Model

We describe several new ways of specifying the behaviour of Lemaitre-Tolman (LT) models, in each case presenting the method for obtaining the LT arbitrary functions from the given data, and the conditions for existence of such solutions. In addition to our previously considered `boundary conditions', the new ones include: a simultaneous big bang, a homogeneous density or velocity distribution in the asymptotic future, a simultaneous big crunch, a simultaneous time of maximal expansion, a chosen density or velocity distribution in the asymptotic future, only growing or only decaying fluctuations. Since these conditions are combined in pairs to specify a particular model, this considerably increases the possible ways of designing LT models with desired properties.

gr-qc↗

Formation of voids in the Universe within the Lemaitre-Tolman model

We develop models of void formation starting from a small initial fluctuation at recombination and growing to a realistic present day density profile in agreement with observations of voids. The model construction is an extension of previously developed algorithms for finding a Lemaitre-Tolman metric that evolves between two profiles of either density or velocity specified at two times. Of the 4 profiles of concern -- those of density and velocity at recombination and at the present day -- two can be specified and the other two follow from the derived model. We find that, in order to reproduce the present-day void density profiles, the initial velocity profile is more important than the initial density profile. Extrapolation of current CMB observations to the scales relevant to proto-voids is very uncertain. Even so, we find that it is very difficult to make both the initial density and velocity fluctuation amplitudes small enough, and still obtain a realistic void by today.

gr-qc↗

Formation of a galaxy with a central black hole in the Lemaitre-Tolman model

We construct two models of the formation a galaxy with a central black hole, starting from a small initial fluctuation at recombination. This is an application of previously developed methods to find a Lemaitre-Tolman model that evolves from a given initial density or velocity profile to a given final density profile. We show that the black hole itself could be either a collapsed object, or a non-vacuum generalisation of a full Schwarzschild-Kruskal-Szekeres wormhole. Particular attention is paid to the black hole's apparent and event horizons.

gr-qc↗

You Can't Get Through Szekeres Wormholes - or - Regularity, Topology and Causality in Quasi-Spherical Szekeres Models

The spherically symmetric dust model of Lemaitre-Tolman can describe wormholes, but the causal communication between the two asymptotic regions through the neck is even less than in the vacuum (Schwarzschild-Kruskal-Szekeres) case. We investigate the anisotropic generalisation of the wormhole topology in the Szekeres model. The function E(r, p, q) describes the deviation from spherical symmetry if \partial_r E \neq 0, but this requires the mass to be increasing with radius, \partial_r M > 0, i.e. non-zero density. We investigate the geometrical relations between the mass dipole and the locii of apparent horizon and of shell-crossings. We present the various conditions that ensure physically reasonable quasi-spherical models, including a regular origin, regular maxima and minima in the spatial sections, and the absence of shell-crossings. We show that physically reasonable values of \partial_r E \neq 0 cannot compensate for the effects of \partial_r M > 0 in any direction, so that communication through the neck is still worse than the vacuum. We also show that a handle topology cannot be created by identifying hypersufaces in the two asymptotic regions on either side of a wormhole, unless a surface layer is allowed at the junction. This impossibility includes the Schwarzschild-Kruskal-Szekeres case.

gr-qc↗

Structure formation in the Lemaitre-Tolman model

Structure formation within the Lemaitre-Tolman model is investigated in a general manner. We seek models such that the initial density perturbation within a homogeneous background has a smaller mass than the structure into which it will develop, and the perturbation then accretes more mass during evolution. This is a generalisation of the approach taken by Bonnor in 1956. It is proved that any two spherically symmetric density profiles specified on any two constant time slices can be joined by a Lemaitre-Tolman evolution, and exact implicit formulae for the arbitrary functions that determine the resulting L-T model are obtained. Examples of the process are investigated numerically.

gr-qc↗

Friedmann limits of rotating hypersurface-homogeneous dust models

The existence of Friedmann limits is systematically investigated for all the hypersurface-homogeneous rotating dust models, presented in previous papers by this author. Limiting transitions that involve a change of the Bianchi type are included. Except for stationary models that obviously do not allow it, the Friedmann limit expected for a given Bianchi type exists in all cases. Each of the 3 Friedmann models has parents in the rotating class; the k = +1 model has just one parent class, the other two each have several parent classes. The type IX class is the one investigated in 1951 by Goedel. For each model, the consecutive limits of zero rotation, zero tilt, zero shear and spatial isotropy are explicitly calculated.

gr-qc↗

Rotating dust solutions of Einstein's equations with 3-dimensional symmetry groups, Part 3: All Killing fields linearly independent of u^α and w^α

This is the third and last part of a series of 3 papers. Using the same method and the same coordinates as in parts 1 and 2, rotating dust solutions of Einstein's equations are investigated that possess 3-dimensional symmetry groups, under the assumption that each of the Killing vectors is linearly independent of velocity $u^α$ and rotation $w^α$ at every point of the spacetime region under consideration. The Killing fields are found and the Killing equations are solved for the components of the metric tensor in every case that arises. No progress was made with the Einstein equations in any of the cases, and no previously known solutions were identified. A brief overview of literature on solutions with rotating sources is given.

gr-qc↗

Rotating dust solutions of Einstein's equations with 3-dimensional symmetry groups, Part 2: One Killing field spanned on u^α and w^α

This is the second part of a series of 3 papers. Using the same method and the same coordinates as in part 1, rotating dust solutions of Einstein's equations are investigated that possess 3-dimensional symmetry groups, under the assumption that only one of the Killing fields is spanned on the fields of velocity $u^α$ and rotation $w^α$, while the other two define vectors that are linearly independent of $u^α$ and $w^α$ at every point of the spacetime region under consideration. The Killing fields are found and the Killing equations solved for the components of the metric tensor in every case that arises. The Einstein equations are simplified in a few cases, three (most probably) new solutions are found, and several classes of solutions known earlier are identified in the present scheme. They include those by Ozsváth, Maitra, Ellis, King and Vishveshwara and Winicour. PACS numbers 04.20.-q, 04.20.Cv, 04.20.Jb, 04.40.+c

gr-qc↗

The newest release of the Ortocartan set of programs for algebraic calculations in relativity

The program Ortocartan for algebraic calculations in relativity has just been implemented in the Codemist Standard Lisp and can now be used under the Windows 98 and Linux operating systems. The paper describes the new facilities and subprograms that have been implemented since the previous release in 1992. These are: the possibility to write the output as Latex input code and as Ortocartan's input code, the calculation of the Ellis evolution equations for the kinematic tensors of flow, the calculation of the curvature tensors from given (torsion-free) connection coefficients in a manifold of arbitrary dimension, the calculation of the lagrangian from a given metric by the Landau-Lifshitz method, the calculation of the Euler-Lagrange equations from a given lagrangian (only for sets of ordinary differential equations) and the calculation of first integrals of sets of ordinary differential equations of second order (the first integrals are assumed to be polynomials of second degree in the first derivatives of the functions).

gr-qc↗

Rotating Bianchi type V dust models generalizing the k = -1 Friedmann model

The Einstein equations for one of the hypersurface-homogeneous rotating dust models are investigated. It is a Bianchi type V model in which one of the Killing fields is spanned on velocity and rotation (case 1.2.2.2 in the classification scheme of the earlier papers). A first integral of the field equations is found, and with a special value of this integral coordinate transformations are used to eliminate two components of the metric. The k = -1 Friedmann model is shown to be contained among the solutions in the limit of zero rotation. The field equations for the simplified metric are reduced to 3 second-order ordinary differential equations that determine 3 metric components plus a first integral that algebraically determines the fourth component. First derivatives of the metric components are subject to a constraint (a second-degree polynomial with coefficients depending on the functions). It is shown that the set does not follow from a Lagrangian of the Hilbert type. The group of Lie point-symmetries of the set is found, it is two-dimensional noncommutative. Finally, a method of searching for first integrals (for sets of differential equations) that are polynomials of degree 1 or 2 in the first derivatives is applied. No such first integrals exist. The method is used to find a constraint (of degree 1 in first derivatives) that could be imposed on the metric, but it leads to a vacuum solution, and so is of no interest for cosmology.

gr-qc↗

Rotating dust solutions of Einstein's equations with 3-dimensional symmetry groups; Part 1: Two Killing fields spanned on u^α and w^{α}

For a rotating dust with a 3-dimensional symmetry group all possible metric forms can be classified and, within each class, explicitly written out. This is made possible by the formalism of Plebański based on the Darboux theorem. In the resulting coordinates, the Killing vector fields (if any exist) assume a special form. Each Killing vector field may be either spanned on the fields of velocity and rotation or linearly independent of them. By considering all such cases one arrives at the classification. With respect to the structures of the groups, this is just the Bianchi classification, but with all possible orientations of the orbits taken into account. In this paper, which is part 1 of a 3-part series, all solutions are considered for which two Killing fields are spanned on velocity and rotation. The solutions of Lanczos and Gödel are identified as special cases, and their new invariant definitions are provided. In addition, a new invariant definition is given of the Ozsvath class III solution.

gr-qc↗