SearcharxivSearch

arXiv subjects

Angelo Paduano

Publications and source records attributed to Angelo Paduano.

3 recordsLinked to original sources

Noise dissipation mechanisms of an acoustic liner under grazing flow

High-fidelity lattice-Boltzmann very-large-eddy simulations are performed to describe the noise dissipation mechanisms in a single cavity acoustic liner subjected to grazing turbulent flow at a centreline Mach number of 0.3 and plane acoustic waves. The study examines the effects of sound pressure level (ranging from 130 to 160 dB) and source frequency, as well as of the direction of acoustic-wave propagation relative to the grazing flow. The acoustic energy dissipation mechanisms are the viscous losses within the shear layer forming along the internal walls of the orifice and the vortex-shedding. The latter is quantified through Howe's energy corollary. In the absence of grazing flow, acoustic energy is dissipated almost equally during both inflow and outflow phases, with vortex shedding dominating at high SPL and viscous losses at low SPL. The introduction of a grazing flow alters the flow topology; in particular, the shear layer past the orifice generates a quasi-steady vortex that confines the acoustic-induced flow to the downstream half of the orifice. This topological change alters the two noise dissipation mechanisms: viscous losses increase at low SPL because the grazing flow pushes the fluid toward the downstream lip of the orifice; vortex shedding becomes phase dependent, dissipating acoustic energy during the inflow phase and generating acoustic energy during the outflow phase. This explains why the net acoustic dissipation decreases in the presence of grazing flow, highlighting the crucial role of near-wall flow topology on liner performances.

physics.flu-dyn

Realistic sheared flow profile effects on acoustic impedance eduction in small 3D-ducts

We investigate the influence of realistic sheared grazing flow on acoustic propagation in three-dimensional rectangular ducts. We show that conclusions reached in the literature about the effects of sheared grazing flow on acoustic propagation in lined ducts are dependent on the flow profiles used in those studies, and that significantly different conclusions are reached once a realistic flow profile is used. We particularly focus on small ducts typical of most experimental impedance eduction facilities, for which velocity gradients are relevant in a significant fraction of the duct cross-section. We assess the effect of simplifying the velocity distribution in the cross-section to either a one-dimensional (2D spanwise-infinite duct) or uniform flow profile. Three flow profiles are considered, namely (i) the tensorised hyperbolic tangent, (ii) the law of the wall, and (iii) one obtained from a RANS simulation. These flow profiles are used as input in numerical simulations, based on the solution of the 3D Pridmore-Brown equation, to perform in silico impedance eduction experiments. Results show that realistic flow profiles can be well approximated for acoustic wave propagation in ducts by uniform or 1D flow profiles, provided the bulk Mach number is correctly accounted for, which contrasts with previous findings based on more simplistic flow profiles. The key conclusion of this work is that, if viscous effects are negligible and acoustic impedance is a good representation of a lined wall with grazing flow, then the simplification to a uniform flow is a reasonable approximation and traditional eduction methods are sufficiently accurate.

physics.flu-dyn

On the impact of the turbulent grazing flow development on the acoustic response of an acoustic liner

The interaction between acoustic waves and turbulent grazing flow over an acoustic liner is investigated using Lattice-Boltzmann Very-Large-Eddy simulations. A single-degree-of-freedom liner with 11 streamwise-aligned cavities is studied in a grazing flow impedance tube. The conditions replicate reference experiments from the Federal University of Santa Catarina. The influence of grazing flow (with a centerline Mach of 0.32), acoustic wave amplitude, frequency, and propagation direction relative to the mean flow is analysed. Impedance is computed using both the in-situ and the mode-matching methods. The in-situ method reveals strong spatial variations; however, averaged values throughout the sample show minimal differences between upstream and downstream propagating waves, in contrast to the mode-matching method. Flow analyses reveal that the orifices displace the flow away from the face sheet, with this effect amplified by acoustic waves and dependent on the wave propagation direction. Consequently, the boundary layer displacement thickness (${\delta}$*) increases along the streamwise direction compared to a smooth wall and exhibits localised humps downstream of each orifice. The growth of ${\delta}$* alters the flow dynamics within the orifices by weakening the shear layer at downstream positions. This influences the acoustic-induced mass flow rate through the orifices, suggesting that acoustic energy is dissipated differently along the liner. The role of near-wall flow features highlights the need to consider a spatially evolving turbulent flow when studying the acoustic-flow interaction and measuring impedance. The spatial development of the turbulent flow may also partly explain the upstream-downstream impedance differences, as current eduction methods do not account for it.

physics.flu-dyn