SearcharxivSearch

arXiv subjects

Anna Scotti

Publications and source records attributed to Anna Scotti.

At least 19 recordsLinked to original sources

Elimination-compensation pruning for fully-connected neural networks

The unmatched ability of Deep Neural Networks in capturing complex patterns in large and noisy datasets is often associated with their large hypothesis space, and consequently to the vast amount of parameters that characterize model architectures. Pruning techniques affirmed themselves as valid tools to extract sparse representations of neural networks parameters, carefully balancing between compression and preservation of information. However, a fundamental assumption behind pruning is that expendable weights should have small impact on the error of the network, while highly important weights should tend to have a larger influence on the inference. We argue that this idea could be generalized; what if a weight is not simply removed but also compensated with a perturbation of the adjacent bias, which does not contribute to the network sparsity? Our work introduces a novel pruning method in which the importance measure of each weight is computed considering the output behavior after an optimal perturbation of its adjacent bias, efficiently computable by automatic differentiation. These perturbations can be then applied directly after the removal of each weight, independently of each other. After deriving analytical expressions for the aforementioned quantities, numerical experiments are conducted to benchmark this technique against some of the most popular pruning strategies, demonstrating an intrinsic efficiency of the proposed approach in very diverse machine learning scenarios. Finally, our findings are discussed and the theoretical implications of our results are presented.

cs.LG

A one-dimensional reduced plasma model for the electrical treeing

Plasma models, consisting of advection-diffusion Partial Differential Equations coupled with chemical reactions, are widely adopted to describe corona, streamers and dielectric barrier discharges. However, the complex geometry of the electrical treeing represents an obstacle for numerical simulations. We develop a reduced one-dimensional formulation of a plasma model for the electrical treeing, describing the evolution of charge concentrations under the effect of an electric field. The reduced system consists of weakly coupled advection-diffusion-reaction equations for charge concentrations inside the treeing and on the dielectric surface, coupled with production-destruction Ordinary Differential Equations for the dipole moment. A numerical scheme based on Finite Volumes and Patankar-type methods allows efficient simulations, while preserving key physical properties. The model is tested on increasingly complex geometries, from a straight line to a realistic electrical treeing.

physics.plasm-ph

Model reduction of parametric ordinary differential equations via autoencoders: representation properties and convergence analysis

We propose a reduced-order modeling approach for nonlinear, parameter-dependent ordinary differential equations (ODE). Dimensionality reduction is achieved using nonlinear maps represented by autoencoders. The resulting low-dimensional ODE is then solved using standard integration in time schemes, and the high-dimensional solution is reconstructed from the low-dimensional one. We investigate the architecture of neural networks for constructing effective autoencoders that hold necessary properties to reconstruct the input manifold with exact representation capabilities. We study the convergence of the reduced-order model to the high-fidelity one. Numerical experiments show the robustness and accuracy of our approach in different scenarios, highlighting its effectiveness in highly complex and nonlinear settings without sacrificing accuracy. Moreover, we examine how the reduction influences the stability properties of the reconstructed high-dimensional solution.

math.NA

Fully-Mixed Virtual Element Method for the Biot Problem

Poroelasticity describes the interaction of deformation and fluid flow in saturated porous media. A fully-mixed formulation of Biot's poroelasticity problem has the advantage of producing a better approximation of the Darcy velocity and stress field, as well as satisfying local mass and momentum conservation. In this work, we focus on a novel four-fields Virtual Element discretization of Biot's equations. The stress symmetry is strongly imposed in the definition of the discrete space, thus avoiding the use of an additional Lagrange multiplier. A complete a priori analysis is performed, showing the robustness of the proposed numerical method with respect to limiting material properties. The first order convergence of the lowest-order fully-discrete numerical method, which is obtained by coupling the spatial approximation with the backward Euler time-advancing scheme, is confirmed by a complete 3D numerical validation. A well known poroelasticity benchmark is also considered to assess the robustness properties and computational performance.

math.NA

Numerical Solution of linear drift-diffusion and pure drift equations on one-dimensional graphs

We propose numerical schemes for the approximate solution of problems defined on the edges of a one-dimensional graph. In particular, we consider linear transport and a drift-diffusion equations, and discretize them by extending Finite Volume schemes with upwind flux to domains presenting bifurcation nodes with an arbitrary number of incoming and outgoing edges, and implicit time discretization. We show that the discrete problems admit positive unique solutions, and we test the methods on the intricate geometry of an electrical treeing.

math.NA

A mixed-dimensional model for the electrostatic problem on coupled domains

We derive a mixed-dimensional 3D-1D formulation of the electrostatic equation in two domains with different dielectric constants to compute, with an affordable computational cost, the electric field and potential in the relevant case of thin inclusions in a larger 3D domain. The numerical solution is obtained by Mixed Finite Elements for the 3D problem and Finite Elements on the 1D domain. We analyze some test cases with simple geometries to validate the proposed approach against analytical solutions, and perform comparisons with the fully resolved 3D problem. We treat the case where ramifications are present in the one-dimensional domain and show some results on the geometry of an electrical treeing, a ramified structure that propagates in insulators causing their failure.

math.NA

Free convection in fractured porous media: a numerical study

The objective of this study is to better understand the influence of fractures on the possibility of free convection in porous media. To this aim, we introduce a mathematical model for density driven flow in the presence of fractures, and the corresponding numerical approximation. In addition to the direct numerical solution of the problem we propose and implement a novel method for the assessment of convective stability through the eigenvalue analysis of the linearized numerical problem. The new method is shown to be in agreement with existing literature cases both in simple and complex fracture configurations. With respect to direct simulation in time, the results of the eigenvalue method lack information about the strength of convection and the steady state solution, they however provide detailed (quantitative) information about the behavior of the solution near the initial equilibrium condition. Furthermore, not having to solve a time-dependent problem makes the method computationally very efficient. Finally, the question of how the porous matrix interacts with the fracture network to enable free convection is examined: the porous matrix is shown to be of key importance in enabling convection for complex fracture networks, making stability criteria based on the fracture network alone somewhat limited in applicability.

math.NA

A hybrid upwind scheme for two-phase flow in fractured porous media

Simulating the flow of two fluid phases in porous media is a challenging task, especially when fractures are included in the simulation. Fractures may have highly heterogeneous properties compared to the surrounding rock matrix, significantly affecting fluid flow, and at the same time hydraulic aperture that are much smaller than any other characteristic sizes in the domain. Generally, flow simulators face difficulties with counter-current flow, generated by gravity and pressure gradients, which hinders the convergence of non-linear solvers (Newton). In this work, we model the fracture geometry with a mixed-dimensional discrete fracture network, thus lightening the computational burden associated to an equi-dimensional representation. We address the issue of counter-current flows with appropriate spatial discretization of the advective fluid fluxes, with the aim of improving the convergence speed of the non-linear solver. In particular, the extension of the hybrid upwinding to the mixed-dimensional framework, with the use of a phase potential upstreaming at the interfaces of subdomains. We test the method across several cases with different flow regimes and fracture network geometry. Results show robustness of the chosen discretization and a consistent improvements, in terms of Newton iterations, compared to use the phase potential upstreaming everywhere.

math.NA

Application of Deep Learning Reduced-Order Modeling for Single-Phase Flow in Faulted Porous Media

We apply reduced-order modeling (ROM) techniques to single-phase flow in faulted porous media, accounting for changing rock properties and fault geometry variations using a radial basis function mesh deformation method. This approach benefits from a mixed-dimensional framework that effectively manages the resulting non-conforming mesh. To streamline complex and repetitive calculations such as sensitivity analysis and solution of inverse problems, we utilize the Deep Learning Reduced Order Model (DL-ROM). This non-intrusive neural network-based technique is evaluated against the traditional Proper Orthogonal Decomposition (POD) method across various scenarios, demonstrating DL-ROM's capacity to expedite complex analyses with promising accuracy and efficiency.

math.NA

A mixed-dimensional model for direct current simulations in presence of a thin high-resistivity liner

In this work we present a mixed-dimensional mathematical model to obtain the electric potential and current density in direct current simulations when a thin liner is included in the modelled domain. The liner is used in landfill management to prevent leakage of leachate from the waste body into the underground and is made of a highly-impermeable high-resistivity plastic material. The electrodes and the liner have diameters and thickness respectively that are much smaller than their other dimensions, thus their numerical simulation might be too costly in an equi-dimensional setting. Our approach is to approximate them as objects of lower dimension and derive the corresponding equations. The obtained mixed-dimensional model is validated against laboratory experiments of increasing complexity showing the reliability of the proposed mathematical model.

math.NA

Mixed and multipoint finite element methods for rotation-based poroelasticity

This work proposes a mixed finite element method for the Biot poroelasticity equations that employs the lowest-order Raviart-Thomas finite element space for the solid displacement and piecewise constants for the fluid pressure. The method is based on the formulation of linearized elasticity as a weighted vector Laplace problem. By introducing the solid rotation and fluid flux as auxiliary variables, we form a four-field formulation of the Biot system, which is discretized using conforming mixed finite element spaces. The auxiliary variables are subsequently removed from the system in a local hybridization technique to obtain a multipoint rotation-flux mixed finite element method. Stability and convergence of the four-field and multipoint mixed finite element methods are shown in terms of weighted norms, which additionally leads to parameter-robust preconditioners. Numerical experiments confirm the theoretical results.

math.NA

Local Embedded Discrete Fracture Model (LEDFM)

The study of flow in fractured porous media is a key ingredient for many geoscience applications, such as reservoir management and geothermal energy production. Modelling and simulation of these highly heterogeneous and geometrically complex systems require the adoption of non-standard numerical schemes. The Embedded Discrete Fracture Model (EDFM) is a simple and effective way to account for fractures with coarse and regular grids, but it suffers from some limitations: it assumes a linear pressure distribution around fractures, which holds true only far from the tips and fracture intersections, and it can be employed for highly permeable fractures only. In this paper we propose an improvement of EDFM which aims at overcoming these limitations computing an improved coupling between fractures and the surrounding porous medium by a) relaxing the linear pressure distribution assumption, b) accounting for impermeable fractures modifying near-fracture transmissibilities. These results are achieved by solving different types of local problems with a fine conforming grid, and computing new transmissibilities (for connections between fractures and the surrounding porous medium and those through the porous medium itself near to the fractures). Such local problems are inspired from numerical upscaling techniques present in the literature. The new method is called Local Embedded Discrete Fracture Model (LEDFM) and the results obtained from several numerical tests confirm the aforementioned improvements.

math.NA

Uncertainty quantification for mineral precipitation and dissolution in fractured porous media

In this work, we present an uncertainty quantification analysis to determine the influence and importance of some physical parameters in a reactive transport model in fractured porous media. An accurate description of flow and transport in the fractures is key to obtain reliable simulations, however, fractures geometry and physical characteristics pose several challenges from both the modeling and implementation side. We adopt a mixed-dimensional approximation, where fractures and their intersections are represented as objects of lower dimension. To simplify the presentation, we consider only two chemical species: one solute, transported by water, and one precipitate attached to the solid skeleton. A global sensitivity analysis to uncertain input data is performed exploiting the Polynomial Chaos expansion along with spectral projection methods on sparse grids.

math.NA

Bend 3d Mixed Virtual Element Method for Elliptic Problems

In this study, we propose a virtual element scheme to solve the Darcy problem in three physical dimensions. The main novelty, here proposed, is that curved elements are naturally handled without any degradation of the solution accuracy. In fact, in presence of curved boundaries, or internal interfaces, the geometrical error introduced by planar approximations may dominate the convergence rate limiting the benefit of high-order approximations. We consider the Darcy problem in its mixed form to directly obtain, with our numerical scheme, accurate and mass conservative fluxes without any post-processing. An important step to derive this new scheme is the actual computation of polynomials over curved polyhedrons, here presented and discussed. Finally, we show the theoretical analysis of the scheme as well as several numerical examples to support our findings

math.NA

A Virtual Element Method for the wave equation on curved edges in two dimensions

In this work we present an extension of the Virtual Element Method with curved edges for the numerical approximation of the second order wave equation in a bidimensional setting. Curved elements are used to describe the domain boundary, as well as internal interfaces corresponding to the change of some mechanical parameters. As opposite to the classic and isoparametric Finite Element approaches, where the geometry of the domain is approximated respectively by piecewise straight lines and by higher order polynomial maps, in the proposed method the geometry is exactly represented, thus ensuring a highly accurate numerical solution. Indeed, if in the former approach the geometrical error might deteriorate the quality of the numerical solution, in the latter approach the curved interfaces/boundaries are approximated exactly guaranteeing the expected order of convergence for the numerical scheme. Theoretical results and numerical findings confirm the validity of the proposed approach.

math.NA

The mixed virtual element method for grids with curved interfaces

In many applications the accurate representation of the computational domain is a key factor to obtain reliable and effective numerical solutions. Curved interfaces, which might be internal, related to physical data, or portions of the physical boundary, are often met in real applications. However, they are often approximated leading to a geometrical error that might become dominant and deteriorate the quality of the results. Underground problems often involve the motion of fluids where the fundamental governing equation is the Darcy law. High quality velocity fields are of paramount importance for the successful subsequent coupling with other physical phenomena such as transport. The virtual element method, as solution scheme, is known to be applicable in problems whose discretizations requires cells of general shape, and the mixed formulation is here preferred to obtain accurate velocity fields. To overcome the issues associated to the complex geometries and, at the same time, retaining the quality of the solutions, we present here the virtual element method to solve the Darcy problem, in mixed form, in presence of curved interfaces in two and three dimensions. The numerical scheme is presented in detail explaining the discrete setting with a focus on the treatment of curved interfaces. Examples, inspired from industrial applications, are presented showing the validity of the proposed approach.

math.NA

A multi-layer reactive transport model for fractured porous media

An accurate modeling of reactive flows in fractured porous media is a key ingredient to obtain reliable numerical simulations of several industrial and environmental applications. For some values of the physical parameters we can observe the formation of a narrow region or layer around the fractures where chemical reactions are focused. Here the transported solute may precipitate and form a salt, or vice-versa. This phenomenon has been observed and reported in real outcrops. By changing its physical properties this layer might substantially alter the global flow response of the system and thus the actual transport of solute: the problem is thus non-linear and fully coupled. The aim of this work is to propose a new mathematical model for reactive flow in fractured porous media, by approximating both the fracture and these surrounding layers via a reduced model. In particular, our main goal is to describe the layer thickness evolution with a new mathematical model, and compare it to a fully resolved equidimensional model for validation. As concerns numerical approximation we extend an operator splitting scheme in time to solve sequentially, at each time step, each physical process thus avoiding the need for a non-linear monolithic solver, which might be challenging due to the non-smoothness of the reaction rate. We consider bi- and tridimensional numerical test cases to asses the accuracy and benefit of the proposed model in realistic scenarios.

math.NA

The Mixed Virtual Element Method on curved edges in two dimensions

In this work, we propose an extension of the mixed Virtual Element Method (VEM) for bi-dimensional computational grids with curvilinear edge elements. The approximation by means of rectilinear edges of a domain with curvilinear geometrical feature, such as a portion of domain boundary or an internal interface, may introduce a geometrical error that degrades the expected order of convergence of the scheme. In the present work a suitable VEM approximation space is proposed to consistently handle curvilinear geometrical objects, thus recovering optimal convergence rates. The resulting numerical scheme is presented along with its theoretical analysis and several numerical test cases to validate the proposed approach.

math.NA