arXiv subjects

Anne-Lise Viotti

Publications and source records attributed to Anne-Lise Viotti.

16 recordsLinked to original sources

arXiv2026

Near single-cycle pulse generation using a cascaded all-bulk multi-pass cell compression system

We experimentally demonstrate the generation of sub-two-cycle optical pulses using a cascaded post-compression scheme based on two bulk multi-pass cells. Starting from 220 fs, 100 $μ$J pulses around 1030 nm, sequential spectral broadening and pulse compression reduce the pulse duration first to 50 fs and ultimately to 5.5 fs (1.6 optical cycles) at a central wavelength of 1058 nm. The ultra-broadband spectrum is enabled by a dispersion-controlled cavity. Comprehensive spectral, temporal, and spatial characterization confirms excellent pulse quality. Despite operating the second multi-pass cell at peak powers several hundred times above the critical power for self-focusing in fused silica, no significant spatio-spectral or spatio-temporal distortions are observed, enabling direct use of the compressed 40 $μ$J pulses in further experiments. Numerical simulations of the nonlinear spectral broadening show excellent agreement with the experimental results, supporting the underlying physical picture. These findings establish bulk multi-pass cells as an efficient, compact, and robust platform for generating few-cycle pulses with excellent beam quality, offering considerable potential for strong-field and ultrafast applications, including extreme-ultraviolet generation and isolated attosecond pulse production.

physics.optics↗

arXiv2025

Towards direct nonlinear compression of energetic sub-nanosecond pulses to the ultrafast regime

Applications of terawatt-class lasers can enormously benefit from pulse trains with kHz repetition rates. The associated unprecedented combinations of peak and average powers require the development of new concepts for scalable ultrashort pulse generation. We propose using multi-mirror multi-pass cells as a compact and cost-efficient solution for the direct post-compression of sub-nanosecond pulses into the femtosecond regime. We simulate spectral broadening of 100-mJ, 300-ps pulses to a sub-ps Fourier transform-limit in a 1-m diameter multi-pass cell. Furthermore, an 11-mirror cell for about 300 passes was set-up for proof-of-concept. To reach a spectral broadening factor of 15 in air, only 260 MW of peak power were required. The proposed scheme can efficiently transform industrially mature high-power, high-energy lasers into unique ultrafast sources.

physics.optics↗

arXiv2025

Compact, intense attosecond sources driven by hollow Gaussian beams

High-order harmonic generation (HHG) enables the up-conversion of intense infrared or visible femtosecond laser pulses into extreme-ultraviolet attosecond pulses. However, the highly nonlinear nature of the process results in low conversion efficiency, which can be a limitation for applications requiring substantial pulse energy, such as nonlinear attosecond time-resolved spectroscopy or single-shot diffractive imaging. Refocusing of the attosecond pulses is also essential to achieve a high intensity, but difficult in practice due to strong chromatic aberrations. In this work, we address both the generation and the refocusing of attosecond pulses by sculpting the driving beam into a ring-shaped intensity profile with no spatial phase variations, referred to as a Hollow Gaussian beam (HGB). Our experimental and theoretical results reveal that HGBs efficiently redistribute the driving laser energy in the focus, where the harmonics are generated on a ring with low divergence, which furthermore decreases with increasing order. Although generated as a ring, the attosecond pulses can be refocused with greatly reduced chromatic spread, therefore reaching higher intensity. This approach enhances the intensity of refocused attosecond pulses and enables significantly higher energy to be delivered in the driving beam without altering the focusing conditions. These combined advantages open pathways for compact, powerful, tabletop, laser-driven attosecond light sources.

physics.optics↗

arXiv2025

Influence of the laser pulse duration in high-order harmonic generation

High-order harmonic generation (HHG) in gases has been studied for almost 40 years in many different conditions, varying the laser wavelength, intensity, focusing geometry, target design, gas species, etc. However, no systematic investigation of the effect of the pulse duration has been performed in spite of its expected impact on phase-matching of the high-order harmonics. Here, we develop a compact post-compression method based on a bulk multi-pass cell enabling tunable Fourier-limited pulse durations. We examine the HHG yield as a function of the pulse duration, ranging from 42 fs to 180 fs, while maintaining identical focusing conditions and generating medium. Our findings reveal that, for a given intensity, there exists an optimum pulse duration - not necessarily the shortest - that maximizes conversion efficiency. This optimum pulse duration increases as the intensity decreases. The experimental results are corroborated by numerical simulations, which show the dependence of HHG yield on the duration and peak intensity of the driving laser and underscore the importance of the interplay between light-matter interaction and phase-matching in the non-linear medium. Our conclusion explains why HHG could be demonstrated in 1988 with pulses as long as 40 ps and intensities of just a few $10^{13}$ W/cm${^2}$.

physics.optics↗

arXiv2024

Energy scaling in a compact bulk multi-pass cell enabled by Laguerre-Gaussian single-vortex beams

We report pulse energy scaling enabled by the use of Laguerre-Gaussian single-vortex ($\text{LG}_{0,l}$) beams for spectral broadening in a sub-40 cm long Herriott-type bulk multi-pass cell. Beams with orders ${l= 1-3}$ are generated by a spatial light modulator, which facilitates rapid and precise reconfiguration of the experimental conditions. 180 fs pulses with 610 uJ pulse energy are post-compressed to 44 fs using an $\text{LG}_{0,3}$ beam, boosting the peak power of an Ytterbium laser system from 2.5 GW to 9.1 GW. The spatial homogeneity of the output $\text{LG}_{0,l}$ beams is quantified and the topological charge is spectrally-resolved and shown to be conserved after compression by employing a custom spatio-temporal coupling measurement setup.

physics.optics↗

arXiv2024

XUV yield optimization of two-color high-order harmonic generation in gases

We perform an experimental two-color high-order harmonic generation study in argon with the fundamental of an ytterbium ultrashort pulse laser and its second harmonic. The intensity of the second harmonic and its phase relative to the fundamental are varied, in a large range compared to earlier works, while keeping the total intensity constant. We extract the optimum values for the relative phase and ratio of the two colors which lead to a maximum yield enhancement for each harmonic order in the extreme ultraviolet spectrum. Within the semi-classical three-step model, the yield maximum can be associated with a flat electron return time vs. return energy distribution. An analysis of different distributions allows to predict the required relative two-color phase and ratio for a given harmonic order, total laser intensity, fundamental wavelength, and ionization potential.

physics.atom-ph↗

arXiv2024

Compact, folded multi-pass cells for energy scaling of post-compression

Combining high peak and high average power has long been a key challenge of ultrafast laser technology, crucial for applications such as laser-plasma acceleration and strong-field physics. A promising solution lies in post-compressed ytterbium lasers, but scaling these to high pulse energies presents a major bottleneck. Post-compression techniques, particularly Herriott-type multi-pass cells (MPCs), have enabled large peak power boosts at high average powers but their pulse energy acceptance reaches practical limits defined by setup size and coating damage threshold. In this work, we address this challenge and demonstrate a novel type of compact, energy-scalable MPC (CMPC). By employing a novel MPC configuration and folding the beam path, the CMPC introduces a new degree of freedom for downsizing the setup length, enabling compact setups even for large pulse energies. We experimentally and numerically verify the CMPC approach, demonstrating post-compression of 8 mJ pulses from 1 ps down to 51 fs in atmospheric air using a cell roughly 45 cm in length at low fluence values. Additionally, we discuss the potential for energy scaling up to 200 mJ with a setup size reaching 2.5 m. Our work presents a new approach to high-energy post-compression, with up-scaling potential far beyond the demonstrated parameters. This opens new routes for achieving the high peak and average powers necessary for demanding applications of ultrafast lasers.

physics.optics↗

arXiv2024

Highly versatile, two-color setup for high-order harmonic generation using spatial light modulators

We present a novel, interferometric, two-color, high-order harmonic generation setup, based on a turn-key Ytterbium-doped femtosecond laser source and its second harmonic. Each interferometer arm contains a spatial light modulator, with individual capabilities to manipulate the spatial beam profiles and to stabilize the relative delay between the fundamental and the second harmonic. Additionally, separate control of the relative power and focusing geometries of the two color beams is implemented to conveniently perform automatized scans of multiple parameters. A live diagnostics system gives continuous information during ongoing measurements.

physics.optics↗

arXiv2023

Time-resolved photoemission electron microscopy on a ZnO surface using an extreme ultraviolet attosecond pulse pair

Electrons photoemitted by extreme ultraviolet attosecond pulses derive spatially from the first few atomic surface layers and energetically from the valence band and highest atomic orbitals. As a result, it is possible to probe the emission dynamics from a narrow two-dimensional region in the presence of optical fields as well as obtain elemental specific information. However, combining this with spatially-resolved imaging is a long-standing challenge because of the large inherent spectral width of attosecond pulses as well as the difficulty of making them at high repetition rates. Here we demonstrate an attosecond interferometry experiment on a zinc oxide (ZnO) surface using spatially and energetically resolved photoelectrons. We combine photoemission electron microscopy with near-infrared pump - extreme ultraviolet probe laser spectroscopy and resolve the instantaneous phase of an infrared field with high spatial resolution. Our results show how the core level states with low binding energy of ZnO are well suited to perform spatially resolved attosecond interferometry experiments. We observe a distinct phase shift of the attosecond beat signal across the laser focus which we attribute to wavefront differences between the pump and the probe fields at the surface. Our work demonstrates a clear pathway for attosecond interferometry with high spatial resolution at atomic scale surface regions opening up for a detailed understanding of nanometric light-matter interaction.

physics.optics↗

arXiv2023

Measurement of Ultrashort Laser Pulses With a Time-Dependent Polarization State Using the D-Scan Technique

The dispersion scan (d-scan) technique is extended to measurement of the timedependent polarization state of ultrashort laser pulses. In the simplest implementation for linearly polarized ultrashort pulses, the d-scan technique records the second harmonic generation (SHG) spectrum as a function of a known spectral phase manipulation. By applying this method to two orthogonally polarized projections of an arbitrary polarized electric field and by measuring the spectrum at an intermediate angle, we can reconstruct the evolution over time of the polarization state. We demonstrate the method by measuring a polarization gate generated from 6 fs pulses with a combination of waveplates. The measurements are compared to simulations, showing an excellent agreement.

physics.optics↗

arXiv2022

Few-cycle pulse generation by double-stage hybrid multi-pass multi-plate nonlinear pulse compression

Few-cycle pulses present an essential tool to track ultrafast dynamics in matter and drive strong field effects. To address photon-hungry applications, high average power lasers are used which, however, cannot directly provide sub-100 fs pulse durations. Post-compression of laser pulses by spectral broadening and dispersion compensation is the most efficient method to overcome this limitation. Here, we demonstrate a notably compact setup which turns a 0.1 GW peak power, picosecond laser into a 2.9 GW peak power, 8.2 fs source. The 120-fold pulse duration shortening is accomplished in a two-stage hybrid multi-pass, multi-plate compression setup. To our knowledge, neither shorter pulses, nor higher peak powers have been reported to-date from bulk multi-pass cells alone, manifesting the power of the hybrid approach. It puts, for instance, compact, cost-efficient and high repetition rate attosecond sources within reach.

physics.optics↗

arXiv2022

Multi-gigawatt peak power post-compression in a bulk multi-pass cell at high repetition rate

The output of a 200 kHz, 34 W, 300 fs Yb amplifier is compressed to 31 fs with > 88 % efficiency to reach a peak power of 2.5 GW, which to date is a record for a single-stage bulk multi-pass cell. Despite operation 80 times above the critical power for self-focusing in bulk material, the setup demonstrates excellent preservation of the input beam quality. Extensive beam and pulse characterizations are performed to show that the compressed pulses are promising drivers for high harmonic generation and nonlinear optics in gases or solids.

physics.optics↗

arXiv2022

Temporal quality of post-compressed pulses at large compression factors

Post-compression of ultra-short laser pulses via self-phase modulation is routinely employed for the generation of laser pulses with optical bandwidths reaching far beyond the laser gain limitations. While high compression factors can be routinely achieved, the compressed pulses typically suffer from temporal quality degradation. We numerically and experimentally analyze the deterioration of different measures of temporal quality with increasing compression factor and show how appropriate dispersion management and cascading of the post-compression process can be employed to limit the impact of this effect. The demonstrated saturation of pulse quality degradation at large compression factors puts novel femtosecond laser architectures based on post-compressed pico- or even nanosecond laser systems in sight.

physics.optics↗

arXiv2020

Characterizing ultrashort laser pulses with second harmonic dispersion scans

The dispersion scan (d-scan) technique has emerged as a simple-to-implement characterization method for ultrashort laser pulses. D-scan traces are intuitive to interpret and retrieval algorithms that are both fast and robust have been developed to obtain the spectral phase and the temporal pulse profile. Here, we give a review of the d-scan technique based on second harmonic generation. We describe and compare recent implementations for the characterization of few- and multi-cycle pulses as well as two different approaches for recording d-scan traces in single-shot, thus showing the versatility of the technique.

physics.optics↗

arXiv2020

A high-repetition rate attosecond light source for time-resolved coincidencespectroscopy

Attosecond pulses, produced through high-order harmonic generation in gases, have been successfully used for observing ultrafast, sub-femtosecond electron dynamics in atoms, molecules and solid state systems. Today's typical attosecond sources, however, are often impaired by their low repetition rate and the resulting insufficient statistics, especially when the number of detectable events per shot is limited. This is the case for experiments where several reaction products must be detected in coincidence, and for surface science applications where space-charge effects compromise spectral and spatial resolution. In this work, we present an attosecond light source operating at 200 kHz, which opens up the exploration of phenomena previously inaccessible to attosecond interferometric and spectroscopic techniques. Key to our approach is the combination of a high repetition rate, few-cycle laser source, a specially designed gas target for efficient high harmonic generation, a passively and actively stabilized pump-probe interferometer and an advanced 3D photoelectron/ion momentum detector. While most experiments in the field of attosecond science so far have been performed with either single attosecond pulses or long trains of pulses, we explore the hitherto mostly overlooked intermediate regime with short trains consisting of only a few attosecond pulses.e also present the first coincidence measurement of single-photon double ionization of helium with full angular resolution, using an attosecond source. This opens up for future studies of the dynamic evolution of strongly correlated electrons.

physics.atom-ph↗

arXiv2020

Post-compression of picosecond pulses into the few-cycle regime

In this work, we demonstrate post-compression of 1.2 picosecond laser pulses to 13 fs via gas-based multi-pass spectral broadening. Our results yield a single-stage compression factor of about 40 at 200 W in-burst average power and a total compression factor >90 at reduced power. The employed scheme represents a route towards compact few-cycle sources driven by industrial-grade Yb:YAG lasers at high average power.

physics.optics↗