arXiv subjects

Annie C. Robin

Publications and source records attributed to Annie C. Robin.

At least 37 records · Page 2Linked to original sources

arXiv2017

Chemical Mapping of the Milky Way With The Canada-France Imaging Survey: A Non-parametric Metallicity-Distance Decomposition of the Galaxy

We present the chemical distribution of the Milky Way, based on 2,900$\, {\rm deg^2}$ of $u$-band photometry taken as part of the Canada-France Imaging Survey. When complete, this survey will cover 10,000$\, {\rm deg^2}$ of the Northern sky. By combing the CFHT $u$-band photometry together with SDSS and Pan-STARRS $g,r,$ and $i$, we demonstrate that we are able to measure reliably the metallicities of individual stars to $\sim 0.2$ dex, and hence additionally obtain good photometric distance estimates. This survey thus permits the measurement of metallicities and distances of the dominant main-sequence population out to approximately 30 kpc, and provides much higher number of stars at large extraplanar distances than have been available from previous surveys. We develop a non-parametric distance-metallicity decomposition algorithm and apply it to the sky at $30°< |b| < 70°$ and to the North Galactic Cap. We find that the metallicity-distance distribution is well-represented by three populations whose metallicity distributions do not vary significantly with vertical height above the disk. As traced in main-sequence stars, the stellar halo component shows a vertical density profile that is close to exponential, with a scale height of around 3 kpc. This may indicate that the inner halo was formed partly from disk stars ejected in an ancient minor merger.

astro-ph.GA↗

arXiv2017

A parametric description of the 3D structure of the Galactic Bar/Bulge using the VVV survey

We study the structure of the inner Milky Way using the latest data release of the Vista Variables in Via Lactea (VVV) survey. The VVV is a deep near-infrared, multi-colour photometric survey with a coverage of 300 square degrees towards the Bulge/Bar. We use Red Clump (RC) stars to produce a high-resolution dust map of the VVV's field of view. From de-reddened colour-magnitude diagrams we select Red Giant Branch stars to investigate their 3D density distribution within the central 4 kpc. We demonstrate that our best-fit parametric model of the Bulge density provides a good description of the VVV data, with a median percentage residual of 5$\%$ over the fitted region. The strongest of the otherwise low-level residuals are overdensities associated with a low-latitude structure as well as the so-called X-shape previously identified using the split RC. These additional components contribute only $\sim5\%$ and $\sim7\%$ respectively to the Bulge mass budget. The best-fit Bulge is `boxy' with an axis ratio of [1:0.44:0.31] and is rotated with respect to the Sun-Galactic Centre line by at least $20^{\circ}$. We provide an estimate of the total, full sky, mass of the Bulge of $M_\mathrm{Bulge}^{\mathrm{Chabrier}} = 2.36 \times 10^{10} M_{\odot}$ for a Chabrier initial mass function. We show there exists a strong degeneracy between the viewing angle and the dispersion of the Red Clump absolute magnitude distribution. The value of the latter is strongly dependent on the assumptions made about the intrinsic luminosity function of the Bulge.

astro-ph.GA↗

arXiv2017

Kinematics of the local disk from the RAVE survey and the Gaia first data release

We attempt to constrain the kinematics of the thin and thick disks using the Besancon population synthesis model together with RAVE DR4 and Gaia first data release (TGAS). The RAVE fields were simulated by applying a detailed target selection function and the kinematics was computed using velocity ellipsoids depending on age in order to study the secular evolution. We accounted for the asymmetric drift computed from fitting a Stackel potential to orbits. Model parameters such as velocity dispersions, mean motions, and velocity gradients were adjusted using an ABC-MCMC method. We made use of the metallicity to enhance the separation between thin and thick disks. We show that this model is able to reproduce the kinematics of the local disks in great detail. The disk follows the expected secular evolution, in very good agreement with previous studies of the thin disk. The new asymmetric drift formula, fitted to our previously described Stäckel potential, fairly well reproduces the velocity distribution in a wide solar neighborhood. The U and W components of the solar motion determined with this method agree well with previous studies. However, we find a smaller V component than previously thought, essentially because we include the variation of the asymmetric drift with distance to the plane. The thick disk is represented by a long period of formation (at least 2 Gyr), during which, as we show, the mean velocity increases with time while the scale height and scale length decrease, very consistently with a collapse phase with conservation of angular momentum. This new Galactic dynamical model is able to reproduce the observed velocities in a wide solar neighborhood at the quality level of the TGAS-RAVE sample, allowing us to constrain the thin and thick disk dynamical evolution, as well as determining the solar motion.

astro-ph.GA↗

arXiv2016

Constraining the Galactic structure parameters with the XSTPS-GAC and SDSS photometric surveys

Photometric data from the Xuyi Schmidt Telescope Photometric Survey of the Galactic Anticentre (XSTPS-GAC) and the Sloan Digital Sky Survey (SDSS) are used to derive the global structure parameters of the smooth components of the Milky Way. The data, which cover nearly 11,000 deg$^2$ sky area and the full range of Galactic latitude, allow us to construct a globally representative Galactic model. The number density distribution of Galactic halo stars is fitted with an oblate spheroid that decays by power law. The best-fit yields an axis ratio and a power law index $κ=0.65$ and $p=2.79$, respectively. The $r$-band differential star counts of three dwarf samples are then fitted with a Galactic model. The best-fit model yielded by a Markov Chain Monte Carlo analysis has thin and thick disk scale heights and lengths of $H_{1}=$ 322\,pc and $L_{1}=$2343\,pc, $H_{2}=$794\,pc and $L_{2}=$3638\,pc, a local thick-to-thin disk density ratio of $f_2=$11\,per\,cent, and a local density ratio of the oblate halo to the thin disk of $f_h=$0.16\,per\,cent. The measured star count distribution, which is in good agreement with the above model for most of the sky area, shows a number of statistically significant large scale overdensities, including some of the previously known substructures, such as the Virgo overdensity and the so-called "north near structure", and a new feature between 150\degr $< l < $ 240\degr~and $-1$5\degr $< b < $ $-$5\degr, at an estimated distance between 1.0 and 1.5\,kpc. The Galactic North-South asymmetry in the anticentre is even stronger than previously thought.

astro-ph.GA↗

arXiv2015

Chemical Cartography with APOGEE: Metallicity Distribution Functions and the Chemical Structure of the Milky Way Disk

Using a sample of 69,919 red giants from the SDSS-III/APOGEE Data Release 12, we measure the distribution of stars in the [$α$/Fe] vs. [Fe/H] plane and the metallicity distribution functions (MDF) across an unprecedented volume of the Milky Way disk, with radius $3 11$ kpc. The peak of the midplane MDF shifts to lower metallicity at larger $R$, reflecting the Galactic metallicity gradient. Most strikingly, the shape of the midplane MDF changes systematically with radius, with a negatively skewed distribution at $3 1$ kpc or [$α$/Fe]$>0.18$, the MDF shows little dependence on $R$. The positive skewness of the outer disk MDF may be a signature of radial migration; we show that blurring of stellar populations by orbital eccentricities is not enough to explain the reversal of MDF shape but a simple model of radial migration can do so.

astro-ph.GA↗

arXiv2015

Abundances, Stellar Parameters, and Spectra From the SDSS-III/APOGEE Survey

The SDSS-III/APOGEE survey operated from 2011-2014 using the APOGEE spectrograph, which collects high-resolution (R~22,500), near-IR (1.51-1.70 microns) spectra with a multiplexing (300 fiber-fed objects) capability. We describe the survey data products that are publicly available, which include catalogs with radial velocity, stellar parameters, and 15 elemental abundances for over 150,000 stars, as well as the more than 500,000 spectra from which these quantities are derived. Calibration relations for the stellar parameters (Teff, log g, [M/H], [alpha/M]) and abundances (C, N, O, Na, Mg, Al, Si, S, K, Ca, Ti, V, Mn, Fe, Ni) are presented and discussed. The internal scatter of the abundances within clusters indicates that abundance precision is generally between 0.05 and 0.09 dex across a broad temperature range; within more limited ranges and at high S/N, it is smaller for some elemental abundances. We assess the accuracy of the abundances using comparison of mean cluster metallicities with literature values, APOGEE observations of the solar spectrum and of Arcturus, comparison of individual star abundances with other measurements, and consideration of the locus of derived parameters and abundances of the entire sample, and find that it is challenging to determine the absolute abundance scale; external accuracy may be good to 0.1-0.2 dex. Uncertainties may be larger at cooler temperatures (Teff<4000K). Access to the public data release and data products is described, and some guidance for using the data products is provided.

astro-ph.GA↗

arXiv2014

Tracing chemical evolution over the extent of the Milky Way's Disk with APOGEE Red Clump Stars

We employ the first two years of data from the near-infrared, high-resolution SDSS-III/APOGEE spectroscopic survey to investigate the distribution of metallicity and alpha-element abundances of stars over a large part of the Milky Way disk. Using a sample of ~10,000 kinematically-unbiased red-clump stars with ~5% distance accuracy as tracers, the [alpha/Fe] vs. [Fe/H] distribution of this sample exhibits a bimodality in [alpha/Fe] at intermediate metallicities, -0.9<[Fe/H]<-0.2, but at higher metallicities ([Fe/H]=+0.2) the two sequences smoothly merge. We investigate the effects of the APOGEE selection function and volume filling fraction and find that these have little qualitative impact on the alpha-element abundance patterns. The described abundance pattern is found throughout the range 5<R<11 kpc and 0<|Z|<2 kpc across the Galaxy. The [alpha/Fe] trend of the high-alpha sequence is surprisingly constant throughout the Galaxy, with little variation from region to region (~10%). Using simple galactic chemical evolution models we derive an average star formation efficiency (SFE) in the high-alpha sequence of ~4.5E-10 1/yr, which is quite close to the nearly-constant value found in molecular-gas-dominated regions of nearby spirals. This result suggests that the early evolution of the Milky Way disk was characterized by stars that shared a similar star formation history and were formed in a well-mixed, turbulent, and molecular-dominated ISM with a gas consumption timescale (1/SFE) of ~2 Gyr. Finally, while the two alpha-element sequences in the inner Galaxy can be explained by a single chemical evolutionary track this cannot hold in the outer Galaxy, requiring instead a mix of two or more populations with distinct enrichment histories.

astro-ph.GA↗

arXiv2014

The APOGEE red-clump catalog: Precise distances, velocities, and high-resolution elemental abundances over a large area of the Milky Way's disk

The Sloan Digital Sky Survey III's Apache Point Observatory Galactic Evolution Experiment (APOGEE) is a high-resolution near-infrared spectroscopic survey covering all of the major components of the Galaxy, including the dust-obscured regions of the inner Milky Way disk and bulge. Here we present a sample of 10,341 likely red-clump stars (RC) from the first two years of APOGEE operations, selected based on their position in color-metallicity-surface-gravity-effective-temperature space using a new method calibrated using stellar-evolution models and high-quality asteroseismology data. The narrowness of the RC locus in color-metallicity-luminosity space allows us to assign distances to the stars with an accuracy of 5 to 10%. The sample extends to typical distances of about 3 kpc from the Sun, with some stars out to 8 kpc, and spans a volume of approximately 100 kpc^3 over 5 kpc <~ R <~ 14 kpc, |Z| <~ 2 kpc, and -15 deg <~ Galactocentric azimuth <~ 30 deg. The APOGEE red-clump (APOGEE-RC) catalog contains photometry from 2MASS, reddening estimates, distances, line-of-sight velocities, stellar parameters and elemental abundances determined from the high-resolution APOGEE spectra, and matches to major proper motion catalogs. We determine the survey selection function for this data set and discuss how the RC selection samples the underlying stellar populations. We use this sample to limit any azimuthal variations in the median metallicity within the ~45 degree-wide azimuthal region covered by the current sample to be <= 0.02 dex, which is more than an order of magnitude smaller than the radial metallicity gradient. This result constrains coherent non-axisymmetric flows within a few kpc from the Sun.

astro-ph.GA↗

arXiv2014

N-body simulation insights into the X-shaped bulge of the Milky Way: Kinematics and distance to the Galactic Centre

Using simulations of box/peanut- (B/P-) shaped bulges, we explore the nature of the X-shape of the Milky Way's bulge. An X-shape can be associated with a B/P-shaped bulge driven by a bar. By comparing in detail the simulations and the observations we show that the principal kinematic imprint of the X-shape is a minimum in the difference between the near and far side mean line-of-sight velocity along the minor axis. This minimum occurs at around |b| = 4°, which is close to the lower limit at which the X-shape can be detected. No coherent signature of an X-shape can be found in Galactocentric azimuthal velocities, vertical velocities, or any of the dispersions. After scaling our simulations, we find that a best fit to the BRAVA data leads to a bar angle of 15°. We also explore a purely geometric method for determining the distance to the Galactic Centre by tracing the arms of the X-shape. We find that we are able to determine this ill-known distance to an accuracy of about 5% per cent with sufficiently accurate distance measurements for the red clump stars in the arms.

astro-ph.GA↗

arXiv2013

Very Metal-poor Stars in the Outer Galactic Bulge Found by the Apogee Survey

Despite its importance for understanding the nature of early stellar generations and for constraining Galactic bulge formation models, at present little is known about the metal-poor stellar content of the central Milky Way. This is a consequence of the great distances involved and intervening dust obscuration, which challenge optical studies. However, the Apache Point Observatory Galactic Evolution Experiment (APOGEE), a wide-area, multifiber, high-resolution spectroscopic survey within Sloan Digital Sky Survey III (SDSS-III), is exploring the chemistry of all Galactic stellar populations at infrared wavelengths, with particular emphasis on the disk and the bulge. An automated spectral analysis of data on 2,403 giant stars in twelve fields in the bulge obtained during APOGEE commissioning yielded five stars with low metallicity([Fe/H]$\le-1.7$), including two that are very metal-poor [Fe/H]$\sim-2.1$ by bulge standards. Luminosity-based distance estimates place the five stars within the outer bulge, where other 1,246 of the analyzed stars may reside. A manual reanalysis of the spectra verifies the low metallicities, and finds these stars to be enhanced in the $α$-elements O, Mg, and Si without significant $α$-pattern differences with other local halo or metal-weak thick-disk stars of similar metallicity, or even with other more metal-rich bulge stars. While neither the kinematics nor chemistry of these stars can yet definitively determine which, if any, are truly bulge members, rather than denizens of other populations co-located with the bulge, the newly-identified stars reveal that the chemistry of metal-poor stars in the central Galaxy resembles that of metal-weak thick-disk stars at similar metallicity.

astro-ph.SR↗

arXiv2012

Constraining the structure and formation of the Galactic bulge from a field in its outskirts. FLAMES-GIRAFFE spectra of about 400 red giants around (l,b)=(0°,-10°)

The presence of two stellar populations in the Milky Way bulge has been reported recently. We aim at studying the abundances and kinematics of stars in the outer bulge, thereby providing additional constraints on models of its formation. Spectra of 401 red giant stars in a field at (l,b)=(0°,-10°) were obtained with FLAMES at the VLT. Stars of luminosities down to below the two bulge red clumps (RCs) are included. From these spectra we measure general metallicities, abundances of Fe and the alpha-elements, and radial velocities (RV) of the stars. These measurements as well as photometric data are compared to simulations with the Besancon and TRILEGAL models of the Galaxy. We confirm the presence of two populations among our sample stars: i) a metal-rich one at [M/H] ~+0.3, comprising about 30% of the sample, with low RV dispersion and low alpha-abundance, and ii) a metal-poor population at [M/H] ~-0.6 with high RV dispersion and high alpha-abundance. The metal-rich population could be connected to the Galactic bar. We identify this population as the carrier of the double RC feature. We do not find a significant difference in metallicity or RV between the two RCs, a small difference in metallicity being probably due to a selection effect. The RV dispersion agrees well with predictions of the Besancon Galaxy model, but the metallicity of the "thick bulge" model component should be shifted to lower metallicity by 0.2 to 0.3dex to well reproduce the observations. We present evidence that the metallicity distribution function depends on the evolutionary state of the sample stars, suggesting that enhanced mass loss preferentially removes metal-rich stars. We also confirm the decrease of α-element over-abundance with increasing metallicity.

astro-ph.GA↗

arXiv2012

The Apache Point Observatory Galactic Evolution Experiment: First Detection of High Velocity Milky Way Bar Stars

Commissioning observations with the Apache Point Observatory Galactic Evolution Experiment (APOGEE), part of the Sloan Digital Sky Survey III, have produced radial velocities (RVs) for ~4700 K/M-giant stars in the Milky Way bulge. These high-resolution (R \sim 22,500), high-S/N (>100 per resolution element), near-infrared (1.51-1.70 um; NIR) spectra provide accurate RVs (epsilon_v~0.2 km/s) for the sample of stars in 18 Galactic bulge fields spanning -1 -32 deg. This represents the largest NIR high-resolution spectroscopic sample of giant stars ever assembled in this region of the Galaxy. A cold (sigma_v~30 km/s), high-velocity peak (V_GSR \sim +200 km/s) is found to comprise a significant fraction (~10%) of stars in many of these fields. These high RVs have not been detected in previous MW surveys and are not expected for a simple, circularly rotating disk. Preliminary distance estimates rule out an origin from the background Sagittarius tidal stream or a new stream in the MW disk. Comparison to various Galactic models suggests that these high RVs are best explained by stars in orbits of the Galactic bar potential, although some observational features remain unexplained.

astro-ph.GA↗

arXiv2012

Stellar populations in the Milky Way bulge region : Towards solving the Galactic bulge and bar shapes using 2MASS data

We re-analyse photometric near-infrared data in order to investigate why it is so hard to get a consensus for the shape and density law of the bulge, as seen from the literature. To solve the problem we use the Besancon Galaxy Model to provide a scheme for parameter fitting of the structural characteristics of the bulge region. The fitting process allows the determination of the global shape of the bulge main structure. We explore various parameters and shape for the bulge/bar structure based on Ferrer's ellipsoids and fit the shape of the inner disc in the same process. The results show that the main structure is a quite standard triaxial boxy bar/bulge with an orientation of about 13 degree with respect to the Sun-centre direction. But the fit is greatly improved when we add a second structure, which is a longer and thicker ellipsoid. We emphasize that our first ellipsoid represent the main boxy bar of the Galaxy, and that the thick bulge could be either a classical bulge slightly flattened by the effect of the bar potential, or a inner thick disc counterpart. We show that the double clump seen at intermediate latitudes can be reproduced by adding a slight flare to the bar. In order to better characterize the populations, we further simulate several fields which have been surveyed in spectroscopy and for which metallicity distribution function (MDF) are available. The model is in good agreement with these MDF along the minor axis if we assume that the main bar has a mean solar metallicity and the second thicker population has a lower metallicity. It then creates naturally a vertical metallicity gradient by the mixing of the two poulations. (abridged)

astro-ph.GA↗

arXiv2011

The Bulge Radial Velocity Assay (BRAVA): II. Complete Sample and Data Release

We present new radial velocity measurements from the Bulge Radial Velocity Assay (BRAVA), a large scale spectroscopic survey of M-type giants in the Galactic bulge/bar region. The sample of ~4500 new radial velocities, mostly in the region -10 deg < l < +10 deg and b ~ -6 deg more than doubles the existent published data set. Our new data extend our rotation curve and velocity dispersion profile to +20 deg, which is ~2.8 kpc from the Galactic Center. The new data confirm the cylindrical rotation observed at -6 deg and -8 deg, and are an excellent fit to the Shen et al. (2010) N-body bar model. We measure the strength of the TiO molecular band as a first step towards a metallicity ranking of the stellar sample, from which we confirm the presence of a vertical abundance gradient. Our survey finds no strong evidence of previously unknown kinematic streams. We also publish our complete catalog of radial velocities, photometry, TiO band strengths, and spectra, which is available at the IRSA archive: http://irsa.ipac.caltech.edu/ as well as at UCLA: http://brava.astro.ucla.edu/.

astro-ph.SR↗

arXiv2009

Kinematics at the Edge of the Galactic Bulge: Evidence for Cylindrical Rotation

We present new results from BRAVA, a large scale radial velocity survey of the Galactic bulge, using M giant stars selected from the Two Micron All Sky Survey catalogue as targets for the Cerro Tololo Inter-American Observatory 4m Hydra multi-object spectrograph. The purpose of this survey is to construct a new generation of self-consistent bar models that conform to these observations. We report the dynamics for fields at the edge of the Galactic bulge at latitudes b=-8 deg. and compare to the dynamics at b=-4 deg. We find that the rotation curve V(r) is the same at b=-8 deg. as at b=-4 deg. That is, the Galactic boxy bulge rotates cylindrically, as do boxy bulges of other galaxies. The summed line of sight velocity distribution at b=-8 deg. is Gaussian, and the binned longitude-velocity plot shows no evidence for either a (disk) population with cold dynamics or for a (classical bulge) population with hot dynamics. The observed kinematics are well modeled by an edge-on N-body bar, in agreement with published structural evidence. Our kinematic observations indicate that the Galactic bulge is a prototypical product of secular evolution in galaxy disks, in contrast with stellar population results that are most easily understood if major mergers were the dominant formation process.

astro-ph.GA↗

arXiv2008

Finding ultracool brown dwarfs with MegaCam on CFHT: method and first results

We present the first results of a wide field survey for cool brown dwarfs with the MegaCam camera on the CFHT telescope, the Canada-France Brown Dwarf Survey, hereafter CFBDS. Our objectives are to find ultracool brown dwarfs and to constrain the field-brown dwarf mass function thanks to a larger sample of L and T dwarfs. We identify candidates in CFHT/MegaCam i' and z' images using optimised psf-fitting within Source Extractor, and follow them up with pointed near-infrared imaging on several telescopes. We have so far analysed over 350 square degrees and found 770 brown dwarf candidates brighter than z'{AB}=22.5. We currently have J-band photometry for 220 of these candidates, which confirms 37% as potential L or T dwarfs. Some are among the reddest and farthest brown dwarfs currently known, including an independent identification of the recently published ULAS J003402.77-005206.7 and the discovery of a second brown dwarf later than T8, CFBDS J005910.83-011401.3. Infrared spectra of three T dwarf candidates confirm their nature, and validate the selection process. The completed survey will discover ~100 T dwarfs and ~500 L dwarfs or M dwarfs later than M8, approximately doubling the number of currently known brown dwarfs. The resulting sample will have a very well-defined selection function, and will therefore produce a very clean luminosity function.

astro-ph↗

arXiv2001

On high proper motion white dwarfs from photographic surveys

The interpretation of high proper motion white dwarfs detected by Oppenheimer et al (2001) was the start of a lively controversy. While the discoverers identify a large fraction of their findings as dark halo members, others interpret the same sample as essentially made of disc and/or thick disc stars. We use the comprehensive description of Galactic stellar populations provided by the "Besancon" model to produce a realistic simulation of Oppenheimer et al. data, including all observational selections and calibration biases. The conclusion is unambiguous: Thick disc white dwarfs resulting from ordinary hypotheses on the local density and kinematics are sufficient to explain the observed objects, there is no need for halo white dwarfs. This conclusion is robust to reasonable changes in model ingredients. The main cause of the misinterpretation seems to be that the velocity distribution of a proper motion selected star sample is severely biased in favour of high velocities. This has been neglected in previous analyses. Obviously this does not prove that no such objects like halo white dwarfs can exist, but Oppenheimer et al. observations drive their possible contribution in the dark matter halo down to an extremely low fraction.

astro-ph↗

arXiv1995

The thick disc of the Galaxy: Sequel of a merging event

Accurate characterization of thick disc properties from recent kinematic and photometric surveys provides converging evidences that this intermediate population is a sequel of the violent heating of early disc populations by a merging satellite galaxy. The thick disc population is revisited under the light of new data in a number of galactic sample fields. Various thick disc hypotheses are fitted to observational data through a maximum likelihood technique. The resulting characteristics of the thick disc are the following : a scale height of 760 $\pm$ 50 pc, with a local density of 5.6 $\pm$ 1 \% of the thin disc. The scale length is constrained to be 2.8 $\pm$ 0.8 kpc, well in agreement with the disc scale length (2.5 $\pm$ 0.3 kpc). The mean metallicity of the thick disc is found to be -0.7 $\pm$ 0.2 dex, with no {significant} metallicity gradients. These photometric constraints in combination with kinematic data give new constraints on the thick disc formation. We show that thick disc characteristics are {hardly compatible with a top-down formation scenario} but fully compatible with a violent merging event arising at the early thin disc life time as described by Quinn, Hernquist \& Fullagar (1993).

astro-ph↗