arXiv subjects

Annika Grundmann

Publications and source records attributed to Annika Grundmann.

4 recordsLinked to original sources

arXiv2024

Volatile MoS${_2}$ Memristors with Lateral Silver Ion Migration for Artificial Neuron Applications

Layered two-dimensional (2D) semiconductors have shown enhanced ion migration capabilities along their van der Waals (vdW) gaps and on their surfaces. This effect can be employed for resistive switching (RS) in devices for emerging memories, selectors, and neuromorphic computing. To date, all lateral molybdenum disulfide (MoS${_2}$)-based volatile RS devices with silver (Ag) ion migration have been demonstrated using exfoliated, single-crystal MoS${_2}$ flakes requiring a forming step to enable RS. Here, we present volatile RS with multilayer MoS${_2}$ grown by metal-organic chemical vapor deposition (MOCVD) with repeatable forming-free operation. The devices show highly reproducible volatile RS with low operating voltages of approximately 2 V and fast switching times down to 130 ns considering their micrometer scale dimensions. We investigate the switching mechanism based on Ag ion surface migration through transmission electron microscopy, electronic transport modeling, and density functional theory. Finally, we develop a physics-based compact model and explore the implementation of our volatile memristors as artificial neurons in neuromorphic systems.

physics.app-ph↗

arXiv2024

Tunable Doping and Mobility Enhancement in 2D Channel Field-Effect Transistors via Damage-Free Atomic Layer Deposition of AlOX Dielectrics

Two-dimensional materials (2DMs) have been widely investigated because of their potential for heterogeneous integration with modern electronics. However, several major challenges remain, such as the deposition of high-quality dielectrics on 2DMs and the tuning of the 2DM doping levels. Here, we report a scalable plasma-enhanced atomic layer deposition (PEALD) process for direct deposition of a nonstoichiometric aluminum oxide (AlOX) dielectric, overcoming the damage issues associated with conventional methods. Furthermore, we control the thickness of the dielectric layer to systematically tune the doping level of 2DMs. The experimental results demonstrate successful deposition without detectable damage, as confirmed by Raman spectroscopy and electrical measurements. Our method enables tuning of the Dirac and threshold voltages of back-gated graphene and MoS${_2}$ field-effect transistors (FETs), respectively, while also increasing the charge carrier mobility in both device types. We further demonstrate the method in top-gated MoS${_2}$ FETs with double-stack dielectric layers (AlOX+Al${_2}$O${_3}$), achieving critical breakdown field strengths of 7 MV/cm and improved mobility compared with the back gate configuration. In summary, we present a PEALD process that offers a scalable and low-damage solution for dielectric deposition on 2DMs, opening new possibilities for precise tuning of device characteristics in heterogeneous electronic circuits.

physics.app-ph↗

arXiv2024

Button Shear Testing for Adhesion Measurements of 2D Materials

Two-dimensional (2D) materials are considered for numerous applications in microelectronics, although several challenges remain when integrating them into functional devices. Weak adhesion is one of them, caused by their chemical inertness. Quantifying the adhesion of 2D materials on three-dimensional surfaces is, therefore, an essential step toward reliable 2D device integration. To this end, button shear testing is proposed and demonstrated as a method for evaluating the adhesion of 2D materials with the examples of graphene and hexagonal boron nitride (hBN), molybdenum disulfide, and tungsten diselenide on silicon dioxide (SiO${_2}$) and silicon nitride substrates. We propose a fabrication process flow for polymer buttons on the 2D materials and establish suitable button dimensions and testing shear speeds. We show with our quantitative data that low substrate roughness and oxygen plasma treatments on the substrates before 2D material transfer result in higher shear strengths. Thermal annealing increases the adhesion of hBN on SiO${_2}$ and correlates with the thermal interface resistance between these materials. This establishes button shear testing as a reliable and repeatable method for quantifying adhesion of 2D materials.

physics.app-ph↗

arXiv2022

Zero Bias Power Detector Circuits based on MoS$_2$ Field Effect Transistors on Wafer-Scale Flexible Substrates

We demonstrate the design, fabrication, and characterization of wafer-scale, zero-bias power detectors based on two-dimensional MoS$_2$ field effect transistors (FETs). The MoS$_2$ FETs are fabricated using a wafer-scale process on 8 $μ$m thick polyimide film, which in principle serves as flexible substrate. The performances of two CVD-MoS$_2$ sheets, grown with different processes and showing different thicknesses, are analyzed and compared from the single device fabrication and characterization steps to the circuit level. The power detector prototypes exploit the nonlinearity of the transistors above the cut-off frequency of the devices. The proposed detectors are designed employing a transistor model based on measurement results. The fabricated circuits operate in Ku-band between 12 and 18 GHz, with a demonstrated voltage responsivity of 45 V/W at 18 GHz in the case of monolayer MoS2 and 104 V/W at 16 GHz in the case of multilayer MoS$_2$, both achieved without applied DC bias. They are the best performing power detectors fabricated on flexible substrate reported to date. The measured dynamic range exceeds 30 dB outperforming other semiconductor technologies like silicon complementary metal oxide semiconductor (CMOS) circuits and GaAs Schottky diodes.

physics.app-ph↗