arXiv subjects

Anouar Benali

Publications and source records attributed to Anouar Benali.

At least 19 recordsLinked to original sources

arXiv2026

Diffusion Quantum Monte Carlo Benchmark of Interlayer Binding and Charge Redistribution in Chemically Distinct Two-Dimensional Van Der Waals Bilayers

Interlayer interactions in two-dimensional materials can generate emergent phenomena absent in their constituent monolayers, including unconventional magnetic order, multiferroicity, and topological magnetic phases. Predicting such emergent behavior requires simultaneously resolving long-range dispersion, short-range orbital hybridization, and electronic correlation interactions that are intrinsically nonlocal and many-body and remain challenging even for advanced density-functional approximations. Here we establish a systematically controlled many-body benchmark for diverse bilayer materials using diffusion Monte Carlo (DMC), spanning single-sheet materials, transition-metal dichalcogenides, and magnetic transition-metal halides. We obtain equilibrium separations, binding energetics, interlayer vibrational modes, and charge redistribution, finding excellent agreement with available experiments while revealing systematic and property-dependent failures across widely used semilocal, meta-GGA, and dispersion-corrected density functionals. Beyond energetics, DMC resolves subtle interlayer charge rearrangements, particularly leading to long-ranged dipolar tails in magnetic Cr trihalides that survive well beyond the regime where semilocal DFT predicts appreciable interlayer polarization, providing a many-body basis for understanding interlayer-coupled ferroic and magnetic phenomena. The resulting energies, response properties, and high-accuracy electron densities constitute a transferable benchmark for developing next-generation density functionals. Finally, we provide a scalable high-performance-computing workflow that enables systematic expansion of many-body benchmark datasets across emerging families of layered quantum materials by the scientific community.

cond-mat.mtrl-sci↗

arXiv2025

Reproducibility of fixed-node diffusion Monte Carlo across diverse community codes: The case of water-methane dimer

Fixed-node diffusion quantum Monte Carlo (FN-DMC) is a widely-trusted many-body method for solving the Schrödinger equation, known for its reliable predictions of material and molecular properties. Furthermore, its excellent scalability with system complexity and near-perfect utilization of computational power makes FN-DMC ideally positioned to leverage new advances in computing to address increasingly complex scientific problems. Even though the method is widely used as a computational gold standard, reproducibility across the numerous FN-DMC code implementations has yet to be demonstrated. This difficulty stems from the diverse array of DMC algorithms and trial wave functions, compounded by the method's inherent stochastic nature. This study represents a community-wide effort to assess the reproducibility of the method, affirming that: Yes, FN-DMC is reproducible (when handled with care). Using the water-methane dimer as the canonical test case, we compare results from eleven different FN-DMC codes and show that the approximations to treat the non-locality of pseudopotentials are the primary source of the discrepancies between them. In particular, we demonstrate that, for the same choice of determinantal component in the trial wave function, reliable and reproducible predictions can be achieved by employing the T-move (TM), the determinant locality approximation (DLA), or the determinant T-move (DTM) schemes, while the older locality approximation (LA) leads to considerable variability in results. These findings demonstrate that, with appropriate choices of algorithmic details, fixed-node DMC is reproducible across diverse community codes-highlighting the maturity and robustness of the method as a tool for open and reliable computational science.

physics.comp-ph↗

arXiv2025

Quantum Monte Carlo Benchmarking of Molecular Adsorption on Graphene-Supported Single Pt Atom

The precise understanding of adsorption energetics and molecular geometry at catalytic sites is fundamental for advancing catalysis, particularly under the constraints of resource efficiency and environmental sustainability. This study benchmarks the performance of density functional theory (DFT) calculations against diffusion Monte Carlo (DMC) calculations for adsorption properties of small gas molecules relevant to CO oxidation -- namely O$_2$, CO, CO$_2$, and atomic oxygen -- on a single Pt atom supported by pristine graphene. Our findings reveal that DMC calculations provide a significantly different landscape of adsorption energetics compared to DFT results. Notably, DFT predicts different lowest-energy configurations and spin states, particularly for O$_2$, which suggests potential discrepancies in predicting the catalytic behavior. Furthermore, this study identifies the critical issue of CO poisoning, highlighted by the large disparity between the DMC adsorption energies of O$_2$ ($-1.23(2)$ eV) and CO ($-3.37(1)$ eV), which can inhibit the catalytic process. These results emphasize the necessity for more sophisticated computational approaches in catalysis research, aiming to refine the prediction accuracy of reaction mechanisms and to enhance the design of more effective catalysts.

cond-mat.mtrl-sci↗

arXiv2025

Toward improved property prediction of 2D materials using many-body quantum Monte Carlo methods

The field of two-dimensional (2D) materials has grown dramatically in the last two decades. 2D materials can be utilized for a variety of next-generation optoelectronic, spintronic, clean energy, and quantum computation applications. These 2D structures, which are often exfoliated from layered van der Waals (vdW) materials, possess highly inhomogeneous electron densities and can possess short- and long-range electron correlations. The complexities of 2D materials make them challenging to study with standard mean-field electronic structure methods such as density functional theory (DFT), which relies on approximations for the unknown exchange-correlation functional. In order to overcome the limitations of DFT, highly accurate many-body electronic structure approaches such as Diffusion Monte Carlo (DMC) can be utilized. In the past decade, DMC has been used to calculate accurate magnetic, electronic, excitonic, and topological properties in addition to accurately capturing interlayer interactions and cohesion and adsorption energetics of 2D materials. This approach has been applied to 2D systems of wide interest including graphene, phosphorene, MoS$_2$, CrI$_3$, VSe$_2$, GaSe, GeSe, borophene, and several others. In this review article, we highlight some successful recent applications of DMC to 2D systems for improved property predictions beyond standard DFT.

cond-mat.mtrl-sci↗

arXiv2025

Quantum mechanical dataset of 836k neutral closed shell molecules with upto 5 heavy atoms from CNOFSiPSClBr

We introduce the Vector-QM24 (VQM24) dataset comprehensively covering all possible neutral closed-shell small organic and inorganic molecules with up to five heavy (\textit{p}-block) atoms: C, N, O, F, Si, P, S, Cl, Br. All valid stoichiometries, Lewis-rule-consistent graphs, and stable conformers (identified via GFN2-xTB) were enumerated combinatorially, yielding 577k conformational isomers spanning 258k constitutional isomers and 5,599 unique stoichiometries. DFT ($ω$B97X-D3/cc-pVDZ) optimizations were performed for all, and diffusion quantum Monte Carlo (DMC@PBE0(ccECP/cc-pVQZ)) energies are provided for 10,793 lowest-energy conformers with up to 4 heavy atoms. VQM24 includes structures, vibrational modes, rotational constants, thermodynamic properties (Gibbs free energies, enthalpies, ZPVEs, entropies, heat capacities), and electronic properties such as atomization, electron interaction, exchange-correlation, dispersion energies, multipole moments (dipole to hexadecapole), alchemical potentials, Mulliken charges, and wavefunctions. Machine learning models of atomization energies on this dataset reveal significantly higher complexity than QM9, with none achieving chemical accuracy. VQM24 offers a rigorous, high-fidelity benchmark for evaluating quantum machine learning models.

physics.chem-ph↗

arXiv2025

A many-body characterization of the fundamental gap in monolayer CrI$_3$

The many-body fixed-node and fixed-phase spin-orbit Diffusion Monte Carlo (DMC) methods are applied to accurately predict the fundamental gap of monolayer CrI$_3$ - the first experimentally-realized 2D material with intrinsic magnetism. The fundamental gap obtained, 2.9(1)~eV, agrees well with the highest peak in optical spectroscopy measurements and a previous $GW$ result. We numerically show that as expected in DMC the same value of the fundamental gap is obtained in the thermodynamic limit using both neutral promotions and the standard quasiparticle definition of the gap based on the ionization potential and electron affinity. Additional analysis of the differences between density matrices formed in different bases using configuration interaction calculations explains why a single-reference trial wave function can produce an accurate excitation. We find that accounting for electron correlation is more crucial than accounting for spin-orbit effects in determining the fundamental gap. These results highlight how DMC can be used to benchmark 2D material physics and emphasize the importance of using beyond-DFT methods for studying 2D materials.

cond-mat.mtrl-sci↗

arXiv2025

Pushing the Accuracy Limit of Foundation Neural Network Models with Quantum Monte Carlo Forces and Path Integrals

We propose an end-to-end integrated strategy to produce highly accurate quantum chemistry (QC) synthetic datasets (energies and forces) aimed at deriving Foundation Machine Learning models for molecular simulation. Starting from Density Functional Theory (DFT), a "Jacob's Ladder" approach leverages computationally-optimized layers of massively GPU-accelerated software with increasing accuracy. Thanks to Exascale, this is the first time that the computationally intensive calculation of Quantum Monte Carlo forces (QMC), and the combination of multi-determinant QMC energies and forces with selected-Configuration Interaction wavefunctions, are computed at such scale at the complete basis-set limit. To bridge the gap between accurate QC and condensed-phase Molecular Dynamics, we leverage transfer learning to improve the DFT-based FeNNix-Bio1 foundation model. The resulting approach is coupled to path integrals adaptive sampling quantum dynamics to perform nanosecond reactive simulations at unprecedented accuracy. These results demonstrate the promise of Exascale to deepen our understanding of the inner machinery of complex biosystems.

physics.chem-ph↗

arXiv2024

Stacking Polymorphism of PtSe$_{2}$: Its Implication to Layer-dependent Metal-insulator Transitions

Using diffusion Monte Carlo (DMC) and density functional theory (DFT) calculations, we examined the structural stability and interlayer binding properties of PtSe$_2$, a representative transition metal dichalcogenide (TMD) with strong interlayer interaction. Our DMC results for the bilayer revealed that AA and AB-r stacking modes are nearly degenerate, highlighting the significant role of interlayer hybridization in offsetting the energy cost due to larger interlayer separations in the AB-r mode. Additionally, our DMC-benchmarked DFT studies with the r$^2$SCAN+rVV10 functional demonstrated pronounced stacking polymorphism in few-layer PtSe$_2$, suggesting the potential for stacking faults and the formation of grain boundaries between different stacking domains which could develop metallic electronic structures. Thus this polymorphism, along with selenium vacancies, influences a layer-dependent metal-insulator transition observed in few-layer PtSe$_2$. Our findings emphasize the importance of both van der Waals interactions and interlayer hybridization in determining the phase stability and electronic properties of TMDs, advancing our understanding of their fundamental properties and refining theoretical models for practical applications in nanoelectronic devices.

cond-mat.mtrl-sci↗

arXiv2024

QREChem: Quantum Resource Estimation Software for Chemistry Applications

As quantum hardware continues to improve, more and more application scientists have entered the field of quantum computing. However, even with the rapid improvements in the last few years, quantum devices, especially for quantum chemistry applications, still struggle to perform calculations that classical computers could not calculate. In lieu of being able to perform specific calculations, it is important have a systematic way of estimating the resources necessary to tackle specific problems. Standard arguments about computational complexity provide hope that quantum computers will be useful for problems in quantum chemistry but obscure the true impact of many algorithmic overheads. These overheads will ultimately determine the precise point when quantum computers will perform better than classical computers. We have developed QREChem to provide logical resource estimates for ground state energy estimation in quantum chemistry through a Trotter-based quantum phase estimation approach. QREChem provides resource estimates which include the specific overheads inherent to problems in quantum chemistry by including heuristic estimates of the number of Trotter steps and number of necessary ancilla, allowing for more accurate estimates of the total number of gates. We utilize QREChem to provide logical resource estimates for a variety of small molecules in various basis sets, obtaining estimates in the range of $10^7-10^{15}$ for total number of T gates. We also determine estimates for the FeMoco molecule and compare all estimates to other resource estimation tools.

cs.ET↗

arXiv2024

Systematic Improvement of Quantum Monte Carlo Calculations in Transition Metal Oxides: sCI-Driven Wavefunction Optimization for Reliable Band Gap prediction

Accurate determination of electronic properties of correlated oxides remains a significant challenge for computational theory. Traditional Hubbard-corrected density functional theory (DFT+U) frequently encounters limitations in precisely capturing electron correlation, particularly when predicting band gaps. We introduce a systematic methodology to enhance the accuracy of diffusion Monte Carlo (DMC) simulations for both ground and excited states, focusing on LiCoO$_2$ as a case study. By employing a selected CI (sCI) approach, we demonstrate the capability to optimize wavefunctions beyond the constraints of single-reference DFT+U trial wavefunctions. We show that the sCI framework enables accurate prediction of band gaps in LiCoO$_2$, closely aligning with experimental values and substantially improving upon traditional computational methods. The study uncovers a nuanced mixed state of $t_{2g}$ a $e_g$ orbitals at the band edges that is not captured by conventional single-reference methods, further elucidating the limitations of PBE+U in describing $d$-$d$ excitations. Our findings advocate for the adoption of beyond-DFT methodologies, such as sCI, to capture the essential physics of excited state wavefunctions in strongly correlated materials. The improved accuracy in band gap predictions and the ability to generate more reliable trial wavefunctions for DMC calculations underscore the potential of this approach for broader applications in the study of correlated oxides. This work not only provides a pathway for more accurate simulations of electronic structures in complex materials but also suggests a framework for future investigations into the excited states of other challenging systems.

cond-mat.mtrl-sci↗

arXiv2023

DFT+U and Quantum Monte Carlo study of electronic and optical properties of AgNiO$_2$ and AgNi$_{1-x}$Co$_{x}$O$_2$ delafossite

As the only semimetallic $d^{10}$-based delafossite, AgNiO$_2$ has received a great deal of attention due to both its unique semimetallicity and its antiferromagnetism in the NiO$_2$ layer that is coupled with a lattice distortion. In contrast, other delafossites such as AgCoO$_2$ are insulating. Here we study how the electronic structure of AgNi$_{1-x}$Co$_{x}$O$_2$ alloys vary with Ni/Co concentration, in order to investigate the electronic properties and phase stability of the intermetallics. While the electronic and magnetic structure of delafossites have been studied using Density Functional Theory (DFT), earlier studies have not included corrections for strong on-site Coulomb interactions. In order to treat these interactions accurately, in this study we use Quantum Monte Carlo (QMC) simulations to obtain accurate estimates for the electronic and magnetic properties of AgNiO$_2$. By comparison to DFT results we show that these electron correlations are critical to account for. We show that Co doping on the magnetic Ni sites results in a metal-insulator transition near $x\sim 0.33$, and reentrant behavior near $x\sim 0.66$

cond-mat.mtrl-sci↗

arXiv2022

Towards DMC accuracy across chemical space with scalable $Δ$-QML

In the past decade, quantum diffusion Monte Carlo (DMC) has been demonstrated to successfully predict the energetics and properties of a wide range of molecules and solids by numerically solving the electronic many-body Schrödinger equation. We show that when coupled with quantum machine learning (QML) based surrogate methods the computational burden can be alleviated such that QMC shows clear potential to undergird the formation of high quality descriptions across chemical space. We discuss three crucial approximations necessary to accomplish this: The fixed node approximation, universal and accurate references for chemical bond dissociation energies, and scalable minimal amons set based QML (AQML) models. Numerical evidence presented includes converged DMC results for over one thousand small organic molecules with up to 5 heavy atoms used as amons, and 50 medium sized organic molecules with 9 heavy atoms to validate the AQML predictions. Numerical evidence collected for $Δ$-AQML models suggests that already modestly sized QMC training data sets of amons suffice to predict total energies with near chemical accuracy throughout chemical space.

physics.chem-ph↗

arXiv2022

Assessing the accuracy of compound formation energies with quantum Monte Carlo

Accurately predicting the formation energy of a compound, which describes its thermodynamic stability, is a key challenge in materials physics. Here, we employ many-body quantum Monte Carlo (QMC) with single-reference trial functions to compute the formation energy of two electronically disparate compounds, the intermetallic VPt$_2$ and the semiconductor CuI, for which standard density functional theory (DFT) predictions using both the Perdew-Burke Ernzerhof (PBE) and the strongly constrained and appropriately normed (SCAN) density functional approximations deviate markedly from available experimental values. For VPt$_2$, we find an agreement between QMC, SCAN, and PBE0 estimates, which therefore remain in disagreement with the much less exothermic experimental value. For CuI, the QMC result agrees with neither SCAN nor PBE pointing towards DFT exchange-correlation biases, likely related to the localized Cu $3d$ electrons. Compared to the behavior of some density functional approximations within DFT, spin-averaged QMC exhibits a smaller but still appreciable deviation when compared to experiment. The QMC result is slightly improved by incorporating spin-orbit corrections for CuI and solid I$_2$, so that experiment and theory are brought into imperfect but reasonable agreement within about 120~meV/atom.

cond-mat.mtrl-sci↗

arXiv2022

The binding of atomic hydrogen on graphene from density functional theory and diffusion Monte Carlo calculations

In this work density functional theory (DFT) and diffusion Monte Carlo (DMC) methods are used to calculate the binding energy of a H atom chemisorbed on the graphene surface. The Perdew-Burke-Ernzerhof (PBE) value of the binding energy is about 20% larger in magnitude than the diffusion Monte Carlo result. The inclusion of exact exchange through the use of the Heyd-Scuseria-Ernzerhof (HSE) functional brings the DFT value of the binding energy closer in line with the DMC result. It is also found that there are significant differences in the charge distributions determined using PBE and DMC approaches.

physics.chem-ph↗

arXiv2021

Importance of van der Waals interactions in hydrogen adsorption on a silicon-carbide nanotube revisited with vdW-DFT and quantum Monte Carlo

DFT is a valuable tool for calculating adsorption energies toward designing materials for hydrogen storage. However, dispersion forces being absent from the theory, it remains unclear how the consideration of van der Waals (vdW) interactions affects such calculations. For the first time, we applied diffusion Monte Carlo (DMC) to evaluate the adsorption characteristics of a hydrogen molecule on a (5,5) armchair silicon-carbide nanotube (H$_2$-SiCNT). Within the framework of density functional theory (DFT), we also benchmarked various exchange-correlation functionals, including those recently developed for treating dispersion or vdW interactions. We found that the vdW-corrected DFT methods agree well with DMC, whereas the local (semilocal) functional significantly over (under)-binds. Furthermore, we fully optimized the H$_2$-SiCNT geometry within the DFT framework and investigated the correlation between structure and charge density. The vdW contribution to adsorption was found to be non-negligible at approximately 1 kcal/mol per hydrogen molecule, which amounts to 9-29 % of the ideal adsorption energy required for hydrogen storage applications.

physics.chem-ph↗

arXiv2020

Towards a Systematic Improvement of the Fixed-Node Approximation in Diffusion Monte Carlo for Solids -- A Case Study In Diamond

While Diffusion Monte Carlo (DMC) is in principle an exact stochastic method for \textit{ab initio} electronic structure calculations, in practice the fermionic sign problem necessitates the use of the fixed-node approximation and trial wavefunctions with approximate nodes (or zeros) must be used. This approximation introduces a variational error in the energy that potentially can be tested and systematically improved. Here, we present a computational method that produces trial wavefunctions with systematically improvable nodes for DMC calculations of periodic solids. These trial wavefunctions are efficiently generated with the configuration interaction using a perturbative selection made iteratively (CIPSI) method. A simple protocol in which both exact and approximate results for finite supercells are used to extrapolate to the thermodynamic limit is introduced.

physics.chem-ph↗

arXiv2020

Taming the fixed-node error in diffusion Monte Carlo via range separation

By combining density-functional theory (DFT) and wave function theory (WFT) via the range separation (RS) of the interelectronic Coulomb operator, we obtain accurate fixed-node diffusion Monte Carlo (FN-DMC) energies with compact multi-determinant trial wave functions. In particular, we combine here short-range exchange-correlation functionals with a flavor of selected configuration interaction (SCI) known as \emph{configuration interaction using a perturbative selection made iteratively} (CIPSI), a scheme that we label RS-DFT-CIPSI. One of the take-home messages of the present study is that RS-DFT-CIPSI trial wave functions yield lower fixed-node energies with more compact multi-determinant expansions than CIPSI, especially for small basis sets. Indeed, as the CIPSI component of RS-DFT-CIPSI is relieved from describing the short-range part of the correlation hole around the electron-electron coalescence points, the number of determinants in the trial wave function required to reach a given accuracy is significantly reduced as compared to a conventional CIPSI calculation. Importantly, by performing various numerical experiments, we evidence that the RS-DFT scheme essentially plays the role of a simple Jastrow factor by mimicking short-range correlation effects, hence avoiding the burden of performing a stochastic optimization. Considering the 55 atomization energies of the Gaussian-1 benchmark set of molecules, we show that using a fixed value of $μ=0.5$~bohr$^{-1}$ provides effective error cancellations as well as compact trial wave functions, making the present method a good candidate for the accurate description of large chemical systems.

physics.chem-ph↗

arXiv2020

Systematic Comparison and Cross-validation of Fixed-Node Diffusion Monte Carlo and Phaseless Auxiliary-Field Quantum Monte Carlo in Solids

Quantum Monte Carlo (QMC) methods are some of the most accurate methods for simulating correlated electronic systems. We investigate the compatibility, strengths and weaknesses of two such methods, namely, diffusion Monte Carlo (DMC) and auxiliary-field quantum Monte Carlo (AFQMC). The multi-determinant trial wave functions employed in both approaches are generated using the configuration interaction using a perturbative selection made iteratively (CIPSI) technique. Complete basis set full configuration interaction (CBS-FCI) energies estimated with CIPSI are used as a reference in this comparative study between DMC and AFQMC. By focusing on a set of canonical finite size solid state systems, we show that both QMC methods can be made to systematically converge towards the same energy once basis set effects and systematic biases have been removed. AFQMC shows a much smaller dependence on the trial wavefunction than DMC while simultaneously exhibiting a much larger basis set dependence. We outline some of the remaining challenges and opportunities for improving these approaches.

physics.comp-ph↗