arXiv subjects
Publications and source records attributed to Anthony Hutcheson.
We give an overview of the science objectives and mission design of the Spectroscopic Time-Resolving Observatory for Broadband Energy X-rays (STROBE-X) observatory, which has been proposed as a NASA probe-class (~$1.5B) mission in response to the Astro2020 recommendation for an X-ray probe.
This paper presents the NSX front-end ASIC, being developed to read charge signals from the HEMA and WFM X-ray detectors for the STROBE-X mission. The ASIC reads out signals from up to 64 anodes of linear Silicon Drift Detectors (SDDs). When unloaded, the ASIC channel has a charge resolution, expressed in Equivalent Noise Charge (ENC) of about 2.8 e-. Once connected to the SDD anode we anticipate, for the 80 keV energy range, a ENC of about 10.7 e- at a leakage current of 2 pA, which corresponds to a FWHM of about 145 eV at 6 keV once the Fano-limited statistics from charge generation in Si is included. The acquisition is event-triggered and, for events exceeding the threshold, the ASIC measures the peak amplitude and stores it in an analog memory for subsequent readout. The ASIC can also force the measurement of the sub-threshold channels neighboring the triggered channel, including the ones that belong to neighbor chips by using bi-directional differential inter-chip communication. Alternatively, the ASIC can measure the amplitudes of all channels at the time of the first detected peak. Additional features include a high-resolution option, channel power down and skip function, a low-noise pulse generator, a temperature sensor, and the monitoring of the channel analog output and trimmed threshold. The power consumption of the individual channel is ~590 $μ$W and, when including all shared circuits, it averages to ~670 $μ$W / channel.
The cadmium zinc TElluride Radiation Imager, or TERI, is an instrument to space qualify large-volume $4 \times 4 \times 1.5 \ \mathrm{cm}^3$ pixelated CdZnTe (CZT) detector technology. The CZT's anode is composed of a $22 \times 22$ array of pixels while the cathode is planar. TERI will contain four of those crystals with each pixel having an energy range of $40 \ \mathrm{keV}$ up to $3 \ \mathrm{MeV}$ with a resolution of $1.3 \%$ full-width-at-half maximum at $662 \ \mathrm{keV}$ all while operating in room temperature. As the detectors are 3D position sensitive, TERI can Compton image events. TERI is fitted with a coded-aperture mask which permits imaging low energy photons in the photoelectric regime. TERI's primary mission is to space-qualify large-volume CZT and measure its degradation due to radiation damage in a space environment. Its secondary mission includes detecting and localizing astrophysical gamma-ray transients. TERI is manifested on DoD's STP-H10 mission for launch to the International Space Station in early 2025.