SearcharxivSearch

arXiv subjects

Anton V. Ievlev

Publications and source records attributed to Anton V. Ievlev.

14 recordsLinked to original sources

Achieving Long Retention in Area-Dependent Resistive Memory with Phase-Separated Amorphous Tantalum Oxide

Resistive random-access memory (ReRAM) is a promising future nonvolatile memory technology. Most ReRAM exhibit a fundamental tradeoff: filament-type ReRAM provides long data retention but suffers from poor uniformity and high switching current, whereas nonfilamentary ReRAM shows lower-current, area-dependent switching but generally poor retention. No two-terminal device has been able to overcome this tradeoff. In this work, we present a two-terminal Ta2O5/ TaOX resistive memory cell that achieves both nonfilamentary switching and long retention. Electrical measurements and composition depth profile show that the switching is not confined to a single filament but is instead uniform across the entire switching region. Despite the nonfilamentary switching, this device can retain information for over 22 hours at 190 °C, which is comparable to the best filamentary devices. We propose that this long retention arises from composition phase separation in amorphous tantalum oxide. Our work shows that the fundamental tradeoff between information retention and switching uniformity can be overcome, and thereby provides a pathway toward more uniform and reliable oxide memory devices.

physics.app-ph

Rapid synthesis of dual-element isotope-enriched alpha-MoO3 crystals by reactive vapor transport

In this work, we develop a rapid reactive vapor transport technique to efficiently utilize limited isotopically pure precursors, particularly gaseous 18O2, and synthesize mm-scale, high-quality crystals within few-minute growth durations. We unlock this capability by using metallic molybdenum precursors with high source temperatures (900 C) and total pressures (1 atm) to maximize precursor efficiency and yield. Subsequently, we grow MoO3 single crystals with high and uniform enrichment levels of 98Mo and 18O isotopes in several different permutations. As probed by Raman spectroscopy, modest and significant phonon energy redshifts occur following 98Mo and 18O enrichment, respectively. By demonstrating control over both molybdenum and oxygen isotopic fractions, we establish a powerful tool to advance nanophotonics and thermal management goals using MoO3. This work is motivated by the possibility to enhance and engineer lattice vibrational mode phenomena including thermal conduction and hyperbolic phonon polariton (HPhP) dispersion, with particular interest in comparing the effects of light and heavy element enrichment.

cond-mat.mtrl-sci

Polarization switching on the open surfaces of the wurtzite ferroelectric nitrides: ferroelectric subsystems and electrochemical reactivity

Binary ferroelectric nitrides are promising materials for information technologies and power electronics. However, polarization switching in these materials is highly unusual. From the structural perspective, polarization reversal is associated with the change of the effective polarity at the surfaces and interfaces from N-to-M terminated, suggesting strong coupling between ferroelectric and chemical phenomena. Phenomenologically, macroscopic studies demonstrate the presence of complex time dependent phenomena including wake-up. Here, we explore the polarization switching using the multidimensional high-resolution piezoresponse force microscopy (PFM) and spectroscopy, detecting both the evolution of induced ferroelectric domain, electromechanical response, and surface deformation during first-order reversal curve measurements. We demonstrate the presence of two weakly coupled ferroelectric subsystems and the bias-induced electrochemical reactivity. The observed behaviors are very similar to the recent studies of other wurtzite system but additionally include electrochemical reactivity, suggesting the universality of these behaviors for the wurtzite binary ferroelectrics. These studies suggest potential of high-resolution multimodal PFM spectroscopies to resolve complex coupled polarization dynamics in materials. Furthermore, these PFM based studies are fully consistent with the recent electron microscopy observations of the shark-teeth like ferroelectric domains in nitrides. Hence, we believe that these studies establish the universal phenomenological picture of polarization switching in binary wurtzite.

cond-mat.mtrl-sci

Electronic mobility, doping, and defects in epitaxial $\mathrm{BaZrS_3}$ chalcogenide perovskite thin films

We present the electronic transport properties of $\mathrm{BaZrS_3}$ (BZS) thin films grown epitaxially by gas-source molecular beam epitaxy (MBE). We observe n-type behavior in all samples, with carrier concentration ranging from $4 \times 10^{18}$ to $4 \times 10^{20} \mathrm{cm^{-3}}$ at room temperature (RT). We observe a champion RT Hall mobility of 11.1 $\mathrm{cm^2V^{-1}s^{-1}}$, which is competitive with established thin-film photovoltaic (PV) absorbers. Temperature-dependent Hall mobility data show that phonon scattering dominates at room temperature, in agreement with computational predictions. X-ray diffraction data illustrate a correlation between mobility and stacking fault concentration, illustrating how microstructure can affect transport. Despite the well-established environmental stability of chalcogenide perovskites, we observe significant changes to electronic properties as a function of storage time in ambient conditions. With the help of secondary-ion mass-spectrometry (SIMS) measurements, we propose and support a defect mechanism that explains this behavior: as-grown films have a high concentration of sulfur vacancies that are shallow donors ($\mathrm{V_S^\bullet}$ or $\mathrm{V_S^{\bullet \bullet}}$), which are converted into neutral oxygen defects ($\mathrm{O_S^\times}$) upon air exposure. We discuss the relevance of this defect mechanism within the larger context of chalcogenide perovskite research, and we identify means to stabilize the electronic properties.

cond-mat.mtrl-sci

Unexpected Tuning of the Anomalous Hall Effect in Altermagnetic MnTe Thin Films

The discovery of an anomalous Hall effect (AHE) sensitive to the magnetic state of antiferromagnets can trigger a new era of spintronics, if materials that host a tunable and strong AHE are identified. Altermagnets are a new class of materials that can under certain conditions manifest a strong AHE, without having a net magnetization. But the ability to control their AHE is still lacking. In this study, we demonstrate that the AHE in altermagnetic α-MnTe grown on GaAs(111) substrates can be "written on-demand" by cooling the material under an in-plane magnetic field. The magnetic field controls the strength and the coercivity of the AHE. Remarkably, this control is unique to α-MnTe grown on GaAs and is absent in α-MnTe grown on SrF2. The tunability that we reveal challenges our current understanding of the symmetry-allowed AHE in this material and opens new possibilities for the design of altermagnetic spintronic devices.

cond-mat.mtrl-sci

Coexistence and interplay of two ferroelectric mechanisms in Zn1-xMgxO

Ferroelectric materials promise exceptional attributes including low power dissipation, fast operational speeds, enhanced endurance, and superior retention to revolutionize information technology. However, the practical application of ferroelectric-semiconductor memory devices has been significantly challenged by the incompatibility of traditional perovskite oxide ferroelectrics with metal-oxide-semiconductor technology. Recent discoveries of ferroelectricity in binary oxides such as Zn1-xMgxO and Hf1-xZrxO have been a focal point of research in ferroelectric information technology. This work investigates the ferroelectric properties of Zn1-xMgxO utilizing automated band excitation piezoresponse force microscopy. Our findings reveal the coexistence of two ferroelectric subsystems within Zn1-xMgxO. We propose a "fringing-ridge mechanism" of polarization switching that is characterized by initial lateral expansion of nucleation without significant propagation in depth, contradicting the conventional domain growth process observed in ferroelectrics. This unique polarization dynamics in Zn1-xMgxO suggests a new understanding of ferroelectric behavior, contributing to both the fundamental science of ferroelectrics and their application in information technology.

cond-mat.mtrl-sci

Polarization-controlled volatile ferroelectric and capacitive switching in Sn$_2$P$_2$S$_6$

Smart electronic circuits that support neuromorphic computing on the hardware level necessitate materials with memristive, memcapacitive, and neuromorphic-like functional properties; in short, the electronic response must depend on the voltage history, thus enabling learning algorithms. Here we demonstrate volatile ferroelectric switching of Sn$_2$P$_2$S$_6$ at room temperature and see that initial polarization orientation strongly determines the properties of polarization switching. In particular, polarization switching hysteresis is strongly imprinted by the original polarization state, shifting the regions of non-linearity toward zero-bias. As a corollary, polarization switching also enables effective capacitive switching, approaching the sought-after regime of memcapacitance. Landau-Ginzburg-Devonshire simulations demonstrate that one mechanism by which polarization can control the shape of the hysteresis loop is the existence of charged domain walls decorating the periphery of the repolarization nucleus. These walls oppose the growth of the switched domain and favor back-switching, thus creating a scenario of controlled volatile ferroelectric switching. Although the measurements were carried out with single crystals, prospectively volatile polarization switching can be tuned by tailoring sample thickness, domain wall mobility and electric fields, paving way to non-linear dielectric properties for smart electronic circuits.

physics.app-ph

Photoinduced iodide repulsion and halides-demixing in layered perovskites

Mixing halides in metal halide perovskites (MHPs) is an effective approach to adjust MHPs bandgap for applications in tandem solar cells. However, mixed-halide (MH-) MHPs undergo light-induced-phase-segregation (LIPS) under continuous illumination. Therefore, understanding the mechanism of LIPS is necessary for developing stable MH-MHPs. In this work, we investigated LIPS in layered (L) MHPs and discovered a critical role of spacer cations in LIPS. Through probing chemical changes of LIPS, we unveil light-induced-iodide-repulsion and the formation of Br-rich-phase in illuminated regions during LIPS. This discovery also gives insight into LIPS process in three dimensional (3D) MHPs. By further investigating LIPS in 3D MHPs, we reveal that LIPS induces not only the formation of Br-rich and I-rich domains but also an overall change of halide distribution along the film thickness direction, which can affect the electronic energy alignment and consequently MHPs devices performance. Moreover, LIPS is more significant in the bulk due to larger population of photogenerated charge carriers. Overall, this study reveals the chemical mechanism of LIPS in MHPs and its potential effect on device performance, offering insight into understanding LIPS mechanism and improving the stability of MHPs.

physics.app-ph

Magnetic Texture in Insulating Single Crystal High Entropy Oxide Spinel Films

Magnetic insulators are important materials for a range of next generation memory and spintronic applications. Structural constraints in this class of devices generally require a clean heterointerface that allows effective magnetic coupling between the insulating layer and the conducting layer. However, there are relatively few examples of magnetic insulators which can be synthesized with surface qualities that would allow these smooth interfaces and precisely tuned interfacial magnetic exchange coupling which might be applicable at room temperature. In this work, we demonstrate an example of how the configurational complexity in the magnetic insulator layer can be used to realize these properties. The entropy-assisted synthesis is used to create single crystal (Mg0.2Ni0.2Fe0.2Co0.2Cu0.2)Fe2O4 films on substrates spanning a range of strain states. These films show smooth surfaces, high resistivity, and strong magnetic responses at room temperature. Local and global magnetic measurements further demonstrate how strain can be used to manipulate magnetic texture and anisotropy. These findings provide insight into how precise magnetic responses can be designed using compositionally complex materials that may find application in next generation magnetic devices.

cond-mat.mtrl-sci

Probing static discharge of polymer surfaces with nanoscale resolution

Triboelectric charging strongly affects the operation cycle and handling of materials and can be used to harvest mechanical energy through triboelectric nanogenerator set-up. Despite ubiquity of triboelectric effects, a lot of mechanisms surrounding the relevant phenomena remain to be understood. Continued progress will rely on the development of rapid and reliable methods to probe accumulation and dynamics of static charges. Here, we demonstrate in-situ quantification of tribological charging with nanoscale resolution, that is applicable to a wide range of dielectric systems. We apply this method to differentiate between strongly and weakly charging compositions of industrial grade polymers. The method highlights the complex phenomena of electrostatic discharge upon contact formation to pre-charged surfaces, and directly reveals the mobility of electrostatic charge on the surface. Systematic characterization of commercial polyethylene terephthalate samples revealed the compositions with the best antistatic properties and provided an estimate of characteristic charge density up to 5x10-5 C/m2. Large-scale molecular dynamics simulations were used to resolve atomistic level structural and dynamical details revealing enrichment of oxygen containing groups near the air-interface where electrostatic charges are likely to accumulate.

physics.app-ph

Stretching Epitaxial La0.6Sr0.4CoO3-δ for Fast Oxygen Reduction

The slow kinetics of the oxygen reduction reaction (ORR) is one of the key challenges in developing high performance energy devices, such as solid oxide fuel cells. Straining a film by growing on a lattice-mismatched substrate has been a conventional approach to enhance the ORR activity. However, due to the limited choice of electrolyte substrates to alter the degree of strain, a systematic study in various materials has been a challenge. Here, we explore the strain modulation of the ORR kinetics by growing epitaxial La0.6Sr0.4CoO3-δ (LSCO) films on yttria-stabilized zirconia substrates with the film thickness below and above the critical thickness for strain relaxation. Two orders of magnitude higher ORR kinetics is achieved in an ultra-thin film with ~0.8% tensile strain as compared to unstrained films. Time-of-flight secondary ion mass spectrometry depth profiling confirms that the Sr surface segregation is not responsible for the enhanced ORR in strained films. We attribute this enhancement of ORR kinetics to the increase in oxygen vacancy concentration in the tensile-strained LSCO film owing to the reduced activation barrier for oxygen surface exchange kinetics. Density functional theory calculations reveal an upshift of the oxygen 2p-band center relative to the Fermi level by tensile strain, indicating the origin of the enhanced ORR kinetics.

cond-mat.mtrl-sci

Electrostrictive and electrostatic responses in contact mode voltage modulated Scanning Probe Microscopies

Electromechanical response of solids underpins image formation mechanism of several scanning probe microscopy techniques including the piezoresponse force microscopy (PFM) and electrochemical strain microscopy (ESM). While the theory of linear piezoelectric and ionic responses are well developed, the contributions of quadratic effects including electrostriction and capacitive tip-surface forces to measured signal remain poorly understood. Here we analyze the electrostrictive and capacitive contributions to the PFM and ESM signals and discuss the implications of the dielectric tip-surface gap on these interactions.

cond-mat.mtrl-sci

Humidity effects on tip-induced polarization switching in lithium niobate

Interest to ferroelectric materials has been increased significantly in last decades due to development of new generation of nonlinear optical and data storage devices. Scanning probe microscopy (SPM) can be used both for study of domain structures with nanoscale spatial resolution and for writing the isolated nanodomains by local application of the electric field. Tip-induced switching in the ambient still needs experimental investigations and theoretical explorations. Here we studied influence of the value of relative humidity in the SPM chamber on the process of tip-induced polarization switching. This phenomenon was attributed to existing of the water meniscus between tip and the sample surface in humid atmosphere. Presented results are important for further complex investigations of the ferroelectric materials and their applications.

cond-mat.mtrl-sci

Ferroelectric domain triggers the charge modulation in semiconductors

We consider a typical heterostructure domain patterned ferroelectric film/ultra thin dielectric layer/ semiconductor, where the semiconductor can be an electrolyte, paraelectric or multi layered graphene. Unexpectedly we have found that the space charge modulation profile and amplitude in the semiconductor, that screens the spontaneous polarization of a 180-degree domain structure of ferroelectric, depends on the domain structure period, dielectric layer thickness and semiconductor screening radius in a rather non-trivial nonlinear way. Multiple size effects appearance and manifestation are defined by the relationship between these three parameters. In addition, we show that the concept of effective gap can be introduced in a simple way only for a single domain limit. Obtained analytical results open the way for understanding of current AFM maps of contaminated ferroelectric surfaces in ambient atmosphere as well as explore the possibilities of conductivity control in ultra-thin semiconductor layers.

cond-mat.mtrl-sci