Searcharxiv⌕ Search

arXiv subjects

Antonio Abate

Publications and source records attributed to Antonio Abate.

10 recordsLinked to original sources

Hierarchical interfacial anchoring for durable perovskite solar cells

Although inverted perovskite solar cells now deliver certified efficiencies approaching their single-junction limits, their practical deployment remains constrained by the thermo-mechanical fragility of buried interfaces under realistic temperature fluctuations. Here, we identify thermo-mechanically driven, stress-accumulation-dominated adhesion failure at self-assembled monolayer-based buried interfaces as a critical failure mode in inverted perovskite solar cells. To address this issue, we propose an interfacial robustness design strategy based on a homometallic halide pretreatment, which constructs a chemically compatible and highly anchorable interfacial environment on transparent conductive oxides to guide the ordered assembly of SAMs. This interfacial treatment increases the density of surface hydroxyl species and enables hierarchical multipoint interfacial anchoring dominated by metal-oxygen coordination, with Cl- induced hydrogen-bonding interactions acting cooperatively, thereby enhancing anchoring robustness and improving tolerance to thermo-mechanical stress accumulation. With this interfacial strategy, the devices achieve a power conversion efficiency of 27.3% (26.9% certified) and retain 94% of their initial efficiency after 400 temperature cycles between -40 and 85 degrees C (ISOS-T-3). These results demonstrate that rational regulation of buried interfacial anchoring architectures can simultaneously enhance device efficiency and long-term operational reliability, offering a viable pathway toward high-efficiency and durable perovskite photovoltaics.

physics.optics↗

Dynamic Molecular Transformation Mediated Crystallization Regulation and Interface Passivation in Tin Based Perovskite Solar Cells

Tin-based perovskites are promising candidates for lead-free photovoltaics but suffer from labile Sn$^{2+}$ coordination, rapid crystallization, and severe interfacial defects. Here, we develop a dynamic molecular transformation using 1-acetylpiperazine (PX) to regulate crystallization and interface chemistry simultaneously. During nucleation and growth, the carbonyl group coordinates with Sn$^{2+}$ to stabilize precursor complexes, moderate supersaturation, and enable controlled crystal growth. Upon annealing, PX undergoes in situ molecular transformation, suggested to form amidinium-functionalized species that preferentially occupy surface A-site vacancies, forming a passivation layer and suppressing nonradiative recombination. This coupled bulk-to-interface evolution yields compact, highly crystalline films with improved optoelectronic quality. Devices achieve a power conversion efficiency of 15.18% and retain 94.1% of initial efficiency after 500 h of continuous illumination. This work demonstrates a dynamic molecular engineering approach integrating crystallization control and interface passivation, providing a pathway toward efficient and stable lead-free perovskite photovoltaics.

physics.optics↗

Phenothiazine-Based Self-Assembled Monolayer with Thiophene Head Groups Minimizes Buried Interface Losses in Tin Perovskite Solar Cells

Self-assembled monolayers (SAMs) have revolutionized the fabrication of lead-based perovskite solar cells, but they remain underexplored in tin perovskite systems. PEDOT is the material of choice for hole-selective layers in tin perovskite solar cells (TPSCs), but presents challenges for both performance and stability. MeO-2PACz, the only SAM reported for Sn perovskites, enables device fabrication but consistently underperforms when compared to PEDOT. In this work, we identify that MeO-2PACz's limitations arise from excessively strong interactions with perovskite surface and poor lattice matching, leading to poor interface quality. To overcome these issues, we design, synthesize, and characterize a novel SAM-forming molecule called Th-2EPT. Th-2EPT optimizes coordination strength and improves lattice compatibility, contributing to the creation of a high-quality buried interface and dramatically suppressing non-radiative recombination. We used Density Functional Theory (DFT) to evaluate coordination strength and lattice compatibility, complemented by nanosecond-resolution optical characterization techniques to confirm significantly reduced interfacial recombination and enhanced carrier lifetimes in Th-2EPT-Perovskite films. With Th-2EPT, we demonstrated the first SAM-based tin perovskite solar cells to outperform PEDOT-based devices, delivering a record power conversion efficiency (PCE) of 8.2% with a DMSO-free solvent system.

cond-mat.mtrl-sci↗

Photovoltaic potential of tin perovskites revealed through layer-by-layer investigation of optoelectronic and charge transport properties

Tin perovskites are the most promising environmentally friendly alternative to lead perovskites. Among tin perovskites, FASnI3 (CH4N2SnI3) shows optimum band gap, and easy processability. However, the performance of FASnI3 based solar cells is incomparable to lead perovskites for several reasons, including energy band mismatch between the perovskite absorber film and the charge transporting layers (CTLs) for both types of carriers, i.e., for electrons (ETLs) and holes (HTLs). However, the band diagrams in the literature are inconsistent, and the charge extraction dynamics are poorly understood. In this paper, we study the energy band positions of FASnI3 based perovskites using Kelvin probe (KP) and photoelectron yield spectroscopy (PYS) to provide a precise band diagram of the most used device stack. In addition, we analyze the defects within the current energetic landscape of tin perovskites. We uncover the role of bathocuproine (BCP) in enhancing the electron extraction at the fullerene C60/BCP interface. Furthermore, we used transient surface photovoltage (tr-SPV) for the first time for tin perovskites to understand the charge extraction dynamics of the most reported HTLs such as NiOx and PEDOT, and ETLs such as C60, ICBA, and PCBM. Finally, we used Hall effect, KP, and time-resolved photoluminescence (TRPL) to estimate an accurate value of the p-doping concentration in FASnI3 and showed a consistent result of 1.5 * 1017 cm-3. Our findings prove that the energetic system of tin halide perovskites is deformed and should be redesigned independently from lead perovskites to unlock the full potential of tin perovskites.

cond-mat.mtrl-sci↗

Unlocking High-Throughput Heterojunction Discovery

Photoluminescence (PL) is a ubiquitous proxy for material quality in optoelectronic devices, widely used for high-throughput materials discovery. However, we demonstrate that in the presence of charge-selective contacts, PL loses its predictive reliability and can exhibit strong quenching even in highly efficient photovoltaic devices under open-circuit conditions. By combining steady-state and transient PL with contactless transient surface photovoltage measurements we disentangle the intertwined processes of extraction and recombination, clarifying the physical origin of this phenomenon. This joint approach reveals extraction dynamics not captured by PL alone. A digital replica of the interface shows that Coulomb attraction and interfacial recombination are the fundamental mechanisms driving quenching after charge extraction. Based on these insights, we present a decision tree for heterojunction classification and PL interpretation applicable across diverse optoelectronic systems, including photovoltaics, photodetectors, and LEDs. Our approach supports systematic screening and optimization of half-devices, bridging the gap between accelerated materials discovery and accelerated device discovery.

physics.app-ph↗

Enhanced Electron Extraction in Co-Doped TiO2 Quantified by Drift-Diffusion Simulation for Stable CsPbI3 Solar Cells

Solar cells based on inorganic perovskite CsPbI3 are promising candidates to resolve the challenge of operational stability in the field of perovskite photovoltaics. For stable operation, however, it is crucial to thoroughly understand the extractive and recombinative processes occurring at the interfaces of perovskite and the charge-selective layers. In this study, we focus on the electronic properties of (doped) TiO2 as an electron-selective contact. We show via KPFM that co-doping of TiO2 with Nb(V) and Sn(IV) reduces the materials work function by 270 meV, giving it stronger n-type characteristics compared to Nb(V) mono-doped TiO2. The altered electronic alignment with CsPbI3 translates to enhanced electron extraction, as demonstrated with ssPL, trPL and trSPV in triad. Importantly, we extract crucial parameters, such as the concentration of extracted electrons and the interface hole recombination velocity, from the SPV transients via 2D drift-diffusion simulations. When implementing the co-doped TiO2 into full n-i-p solar cells, the operational stability is enhanced to 32000 h of projected TS80 lifetime. This study provides fundamental understanding of interfacial charge extraction and its correlation with operational stability of perovskite solar cells, which can be transferred to other charge-selective contacts.

cond-mat.mtrl-sci↗

Interface Modification for Energy Levels Alignment and Charge Extraction in CsPbI$_3$ Perovskite Solar Cells

In perovskite solar cells (PSCs) energy levels alignment and charge extraction at the interfaces are the essential factors directly affecting the device performance. In this work, we present a modified interface between all-inorganic CsPbI$_3$ perovskite and its hole selective contact (Spiro-OMeTAD), realized by a dipole molecule trioctylphosphine oxide (TOPO), to align the energy levels. On a passivated perovskite film, by n-Octyl ammonium Iodide (OAI), we created an upward surface band-bending at the interface by TOPO treatment. This improved interface by the dipole molecule induces a better energy level alignment and enhances the charge extraction of holes from the perovskite layer to the hole transport material. Consequently, a Voc of 1.2 V and high-power conversion efficiency (PCE) of over 19% were achieved for inorganic CsPbI$_3$ perovskite solar cells. Further, to demonstrate the effect of the TOPO dipole molecule, we present a layer-by-layer charge extraction study by transient surface photovoltage technique (trSPV) accomplished by charge transport simulation.

cond-mat.mtrl-sci↗

Quantitative predictions of photo-emission dynamics in metal halide perovskites via machine learning

Metal halide perovskite (MHP) optoelectronics may become a viable alternative to standard Si-based technologies, but the current lack of long-term stability precludes their commercial adoption. Exposure to standard operational stressors (light, temperature, bias, oxygen, and water) often instigate optical and electronic dynamics, calling for a systematic investigation into MHP photophysical processes and the development of quantitative models for their prediction. We resolve the moisture-driven light emission dynamics for both methylammonium lead tribromide and triiodide thin films as a function of relative humidity (rH). With the humidity and photoluminescence time series, we train recurrent neural networks and establish their ability to quantitatively predict the path of future light emission with <11% error over 12 hours. Together, our in situ rH-PL measurements and machine learning forecasting models provide a framework for the rational design of future stable perovskite devices and, thus, a faster transition towards commercial applications.

cond-mat.mtrl-sci↗

Transient Analysis during Maximum Power Point Tracking (TrAMPPT) to Assess Dynamic Response of Perovskite Solar Cells

Determination of the device performance parameters of perovskite solar cells is far from trivial as transient effects may cause large discrepancies in current-voltage measurements as a function of scan rate and pre-conditioning. Maximum power point tracking, MPPT, enables to determine the steady-state maximum power conversion efficiency. However, the MPPT does not provide any information on the device performance parameters, which are reliable only if extracted from current-voltage curves collected under steady-state conditions. We show that is possible to determine the shorter settling or delay time suitable to carry out J-V measurements under steady-state conditions by analysis of the transient device response around the MPP. This procedure proves to be more time-efficient than measurement J-V measurements at a variety of scan rates. Furthermore, the generic algorithm presented here can be implemented to assess changes in the dynamic response of devices during long-term device ageing.

physics.app-ph↗

Halogen-Bond Driven Self-Assembly of Perfluorocarbon Monolayers

The self-assembly of a single layer of organic molecules on a substrate is a powerful strategy to modify surfaces and interfacial properties. The detailed interplay of molecule-to-substrate and molecule-molecule interactions are crucial for the preparation of stable and uniform monomolecular coatings. Thiolates, silanes, phosphonates and carboxylates are widely used head-groups to link organic molecules to specific surfaces study we show that self-assembly of stable and highly compact monolayers of perfluorocarbons. Remarkably, the lowest ever reported surface energy of 2.6 mJ m-2 was measured for a perfluorododecyl iodide monolayer on a silicon nitride substrate. As a convenient, flexible and simple method, the self-assembly of halogen-bond driven perfluorocarbon monolayers is compatible with several applications, ranging from biosensing to electronics and microfluidics. Compared to other methods used to functionalise surfaces and interfaces, our procedure offers the unique advantage to work with extremely inert perfluorinated solvents. We demonstrate that surfaces commonly unstable in contact with many common organic solvents, such as organic-inorganic perovskites, can be functionalized via halogen bonding.

physics.chem-ph↗