arXiv subjects

Antonio Calà Lesina

Publications and source records attributed to Antonio Calà Lesina.

14 recordsLinked to original sources

arXiv2026

Dipole-quadrupole model and multipole analysis of resonant membrane metasurfaces

Membrane-metasurfaces, formed by periodic arrangements of holes in a dielectric layer, are gaining attention for their easier manufacturing via subtractive techniques, unnecessity of substrates, and access to resonant near-fields. Despite their practical relevance, their theoretical description remains elusive. Here, we present a semi-analytical dipole-quadrupole model for the multipole analysis of numerically-obtained reflection and transmission spectra in metasurfaces excited at arbitrary angles. Dipole models are generally sufficient to study traditional metasurfaces made of solid nanostructures. However, the inclusion of electric and magnetic quadrupoles is necessary to study membrane-metasurfaces, which offer an ideal platform to showcase our method. We demonstrate the importance of choosing the optimal position of a symmetric membrane-metasurface's unit cell to ensure the sufficiency of the dipole-quadrupole approximation. We show that our formalism can explain complex phenomena arising from inter-multipole interference, including lattice anapole and generalized Kerker effects, Fano resonances, and quasi-bound states in the continuum. We also present the applicability of the method to membrane-metasurfaces with non-centrosymmetric unit cells (e.g., conical holes and surface voids). By enabling a deeper insight into the coupling mechanisms leading to the formation of local and collective resonances, our method expands the electromagnetics toolbox to study, understand, and design conventional and membrane-metasurfaces.

physics.optics↗

arXiv2025

Strong coupling of collective optical resonances in dielectric metasurfaces

Dielectric metasurfaces can achieve strong light-matter interaction based on several types of collective (nonlocal) resonances, such as surface lattice resonances (SLRs) and quasi bound states in the continuum (quasi-BICs). Spectral selectivity, field enhancement, and high and controllable Q-factors make these resonances appealing for technological applications in lasing, sensing, nonlinear optics, and quantum photon sources. An emerging challenge focuses on tailoring light-matter interaction via mode coupling and hybridization between the fundamental resonances of a metasurface. While strong coupling phenomena have been demonstrated between various resonant modes, the interplay between collective resonances of different natures has not been observed to date. Here, we theoretically, numerically, and experimentally demonstrate the onset of coupling and hybridization between symmetry-protected quasi-BICs and SLRs in a dielectric metasurface. We show the emergence of anticrossing (or Rabi splitting) in the strong coupling regime with suppression of reflection, observed under TE-polarised excitation, and the manifestation of an accidental BIC under TM-polarised illumination as a result of energy exchange between the participating collective resonances in the weak coupling regime. The first effect is accompanied by hybridized near fields of the modes. The observed coupling mechanisms can be controlled by modifying the angle of incidence, polarisation, and surrounding environment. This foundational study on the coupling and hybridization of collective resonances offers insights that can be leveraged for the design of metasurfaces with targeted quasi-aBIC and collective hybridized resonances. It could also open new possibilities to control the near fields associated with such resonances, with promising applications in tunable nanophotonics and light manipulation.

physics.optics↗

arXiv2025

Topology optimization of a superabsorbing thin-film semiconductor metasurface

We demonstrate a computational inverse design method for optimizing broadband-absorbing metasurfaces made of arbitrary dispersive media. Our figure of merit is the time-averaged instantaneous power dissipation in a single unit cell within a periodic array. Its time-domain formulation allows capturing the response of arbitrary dispersive media over any desired spectral range. Employing the time-domain adjoint method within a topology optimization framework enables the design of complex metasurface structures exhibiting unprecedented broadband absorption. We applied the method to a thin-film Silicon-on-insulator configuration and explored the impact of structural and (time-domain inherent) excitation parameters on performance over the visible-ultraviolet. Since our incorporated material model can represent any linear material, the method can also be applied to other all-dielectric, plasmonic, or hybrid configurations.

physics.optics↗

arXiv2024

Analytical model of metasurfaces comprising meta-atoms with anisotropic polarizabilities

A general analytical approach to the study of electromagnetic resonances of metasurfaces consisting of meta-atoms with anisotropic electric and magnetic dipole polarizabilities and irradiated with obliquely incident light is developed in the direct dipole-moment representation. The presented approach allows us to clearly trace and explain the features of the electromagnetic coupling between electric and magnetic dipole moments in the metasurface and to identify its role in the formation of optical resonances. For these purposes, the dependence of the dipole lattice sums on the angle of illumination is also presented. Expressions for the transmittance and reflectivity corresponding to the specular reflectance are presented with explicit inclusion of the dipole moments of particles in the array, which allows using these expressions for multipole analysis of purely numerical results concerning the optical response of metasurfaces. The developed analytical method is tested to characterize the spectral resonances of dielectric metasurfaces composed of rectangular silicon nanoprisms. In addition, we discuss the relationship and similarity between the results of coupled dipole and coupled dipole-quadrupole methods. Our analytical representation of electromagnetic dipole coupling is an insightful and fast method for the characterization of collective resonances in metasurfaces under illumination at oblique incidence. It could be especially useful for designing planar nanophotonic devices consisting of arbitrary-shaped building blocks and operating under special irradiation conditions.

physics.optics↗

arXiv2024

A flexible framework for large-scale FDTD simulations: open-source inverse design for 3D nanostructures

We introduce an efficient open-source python package for the inverse design of three-dimensional photonic nanostructures using the Finite-Difference Time-Domain (FDTD) method. Leveraging a flexible reverse-mode automatic differentiation implementation, our software enables gradient-based optimization over large simulation volumes. Gradient computation is implemented within the JAX framework and based on the property of time reversibility in Maxwell's equations. This approach significantly reduces computational time and memory requirements compared to traditional FDTD methods. Gradient-based optimization facilitates the automatic creation of intricate three-dimensional structures with millions of design parameters, which would be infeasible to design manually. We demonstrate the scalability of the solver from single to multiple GPUs through several inverse design examples, highlighting its robustness and performance in large-scale photonic simulations. In addition, the package features an object-oriented and user-friendly API that simplifies the specification of materials, sources, and constraints. Specifically, it allows for intuitive positioning and sizing of objects in absolute or relative coordinates within the simulation scene. By rapid specification of the desired design properties and rapid optimization within the given user constraints, this open-source framework aims to accelerate innovation in photonic inverse design. It yields a powerful and accessible computational tool for researchers, applicable in a wide range of use cases, including but not limited to photonic waveguides, active devices, and photonic integrated circuits.

physics.optics↗

arXiv2024

Reconfigurable collective resonances induced by liquid crystals in dielectric metasurfaces

Dielectric metasurfaces can show multi-resonant response with high Q-factors in the visible range due to multipole coupling. This work suggests that these collective resonances in all-dielectric metasurfaces can be modified if adjacent to an anisotropic liquid crystal medium, opening a new path toward the dynamic metasurface effects. Using numerical full-wave simulations and the multipole decomposition technique for reflection and transmission coefficients we study the influence of the surrounding anisotropic medium on the resonant response of metasurfaces composed of disk-shaped dielectric nanoparticles. First, we consider tuning and switching the resonances induced by the polarization of the incident beam in metasurfaces placed in a medium with different orientations of LC molecules. Secondly, we study the case when the tuning of resonances is carried out by applying an external voltage that changes the orientation of LC molecules and thereby changes the refractive index of the surrounding medium. The results obtained demonstrate the possibility of directly tuning the resonant response of dielectric metasurfaces in an anisotropic environment, which is important for the development of optical nanodevices with dynamic switching of functional modes in the visible range.

physics.optics↗

arXiv2024

Time-domain topology optimization of power dissipation in dispersive dielectric and plasmonic nanostructures

We present a density-based topology optimization scheme for locally optimizing the electric power dissipation in nanostructures made of lossy dispersive materials. By using the complex-conjugate pole-residue (CCPR) model, we can accurately model any linear materials' dispersion without limiting to specific material classes. We incorporate the CCPR model via auxiliary differential equations (ADE) into Maxwell's equations in the time domain, and formulate a gradient-based topology optimization problem to optimize the dissipation over a broad spectrum of frequencies. To estimate the objective function gradient, we use the adjoint field method, and explain the discretization and integration of the adjoint system into the finite-difference time-domain (FDTD) framework. Our method is demonstrated using the example of topology optimized spherical nanoparticles made of Gold and Silicon with an enhanced absorption efficiency in the visible-ultraviolet spectral range. In this context, a detailed analysis of the challenges of topology optimization of plasmonic materials associated with a density-based approach is given.

physics.optics↗

arXiv2024

Numerical Modeling of Transient Absorption in Hybrid Dual-Plasmonic Au/CuS Nanostructures

Transient absorption in plasmonic materials has recently attracted attention of the chemistry and optics communities as a technique to understand dynamic processes and hot carriers generation on ultrafast timescales. In this context, hybrid Au/CuS nanostructures were recently investigated via ultrafast pump-probe transient absorption spectroscopy revealing an exotic dual-plasmonic behavior. Namely, the excitation of a localized surface plasmon resonance (LSPR) in Au (pump at 551 nm) or CuS (pump at 1051 nm), leads to a transient response in the counterpart. This phenomenon was attributed to Landau damping, which stems from hot carrier generation and injection mechanisms at the interface between the two materials. Here, we employ numerical modeling to further clarify the origin of such response in hybrid Au/CuS nanostructures. The geometry of the hybrid nanostructures is first investigated via steady-state simulations (only probe), confirming an UFO-shaped configuration. We provide clarification on the role of the size ratio between Au and CuS. Finally, we present the simulation of transient absorption in the pump-probe regime, which qualitatively replicates our experimental observations, thus identifying the plasmonic response modified via Landau damping as the main governing mechanism. Our numerical approach provides an important tool for the modeling of transient absorption spectroscopy and can support experimental research on dual-plasmonic materials for applications in spectroscopy, photocatalysis, thermoplasmonics, sensing, and energy harvesting.

physics.optics↗

arXiv2023

Free-form inverse design of arbitrary dispersive materials in nanophotonics

In the last decades nanostructures have unlocked myriads of functionalities in nanophotonics by engineering light-matter interaction beyond what is possible with conventional bulk optics. The space of parameters available for design is practically unlimited due to the large variety of optical materials and geometries that can be realized by nanofabrication techniques. Thus, computational approaches are necessary to efficiently search for optimal solutions. In this paper, we enable the free-form inverse design in 3D of linear optical materials with arbitrary dispersion and anisotropy. This is achieved by implementing the adjoint method based on the complex-conjugate pole-residue pair model within a parallel finite-difference time-domain solver, suitable for high-performance computing systems. Our method is tested on the canonical nanophotonic problem of field enhancement in a gap region. The obtained free-form designs of metallic and dielectric materials satisfy the fundamental curiosity of how optimized nanostructures look like in 3D. Unconventional free-form designs revealed by our method, although may be challenging or unfeasible with current technology, bring new insight into how light interacts with nanostructures, and could provide new ideas to inspire forward design.

physics.optics↗

arXiv2023

Dynamic dielectric metasurfaces via control of surface lattice resonances in non-homogeneous environment

Dynamic control of metamaterials and metasurfaces is crucial for many photonic technologies, such as flat lenses, displays, augmented reality devices, and beam steering, to name a few. The dynamic response is typically achieved by controlling the phase and/or amplitude of individual meta-atom resonances using electro-optic, phase-change or nonlinear effects. Here, we propose and demonstrate a new practical strategy for the dynamic control of the resonant interaction of light with dielectric metasurfaces, exploiting the dependence of the interaction between meta-atoms in the array on the inhomogeneity of the surrounding medium. The revealed tuning mechanisms are based on the concept of the surface lattice resonance (SLR), the development of which strongly depends on the difference between permittivities of superstrate and substrate materials. We experimentally demonstrate surface lattice resonances in dielectric (Si) metasurfaces, and reveal two tuning mechanisms corresponding to shifting or damping of the SLR in optofluidic environment. The demonstrated dynamic tuning effect with the observed vivid colour changes may provide a dynamic metasurface approach with high spectral selectivity and enhanced sensitivity for sensors, as well as high-resolution for small pixel size displays.

physics.optics↗

arXiv2023

Anapole plasmonic meta-atom enabled by inverse design for metamaterials transparency

Anapole states are broadly investigated in nanophotonics for their ability to provide field enhancement and transparency. While low extinction has been achieved in dielectric nanoparticles due to the absence of intrinsic losses, in the case of plasmonic nanostructures this is still lacking. Here, we report an easy-to-fabricate planar plasmonic nanostructure found via topology optimization, which exhibits an anapole state with close-to-ideal characteristics in the visible regime including weak absorption, high near-field enhancment, and strong suppression of scattering. The nanonantenna can act as an individual meta-atom because, due to low inter-coupling, it preserves its optical response even when used in highly packed metasurfaces and metamaterials. The low losses are due to the optimized topology which provides concentration of the field outside the structure with minimum penetration inside the metal. Compared to anapole states in dielectric structures, the accessibility of the volume of enhanced field is suitable for sensing applications. Anapole states are typically interpreted as the result of the interference between electric and toroidal dipole moments. Here and based on a novel approach, in the context of secondary multipole analysis, we introduce the concept of anapole state without using the contribution of toroidal dipole moments. The article provides new insight into anapoles in plasmonic nanostructures and ways to achieve them, while remarking the power of topology optimization to unlock designs with novel functionalities.

physics.optics↗

arXiv2022

Topology optimization of dispersive plasmonic nanostructures in the time-domain

Topology optimization techniques have been applied in integrated optics and nanophotonics for the inverse design of devices with shapes that cannot be conceived by human intuition. At optical frequencies, these techniques have only been utilized to optimize nondispersive materials using frequency-domain methods. However, a time-domain formulation is more efficient to optimize materials with dispersion. We introduce such a formulation for the Drude model, which is widely used to simulate the dispersive properties of metals, conductive oxides, and conductive polymers. Our topology optimization algorithm is based on the finite-difference time-domain (FDTD) method, and we introduce a time-domain sensitivity analysis that enables the evaluation of the gradient information by using one additional FDTD simulation. The existence of dielectric and metallic structures in the design space produces plasmonic field enhancement that causes convergence issues. We employ an artificial damping approach during the optimization iterations that, by reducing the plasmonic effects, solves the convergence problem. We present several design examples of 2D and 3D plasmonic nanoantennas with optimized field localization and enhancement in frequency bands of choice. Our method has the potential to speed up the design of wideband optical nanostructures made of dispersive materials for applications in nanoplasmonics, integrated optics, ultrafast photonics, and nonlinear optics.

physics.optics↗

arXiv2021

Understanding the nonlinear optical response of epsilon near zero materials in the time-domain

The promise of active nanophotonics technology relies on the confinement and control of light at the nanoscale. Confinement via plasmonics, dielectric resonators, and waveguides can be complemented with materials whose optical properties can be controlled using nonlinear effects. Transparent conducting oxides (TCOs) exhibit strong optical nonlinearities in their near zero permittivity spectral region, on the femtosecond time-scale. Harnessing full control over the nonlinear response requires a deeper understanding of the process. To achieve this, we develop a self-consistent time-domain model for the nonlinear optical response of TCOs and implement it into a three-dimensional finite-difference time-domain code. We compare and tune our simulation tools against recently published experimental results for intense laser irradiation of thin indium tin oxide (ITO) films. Finally, by simulating intense laser irradiation of ITO-based plasmonic metasurfaces, we demonstrate the full power of our approach. As expected, we find validating the significant enhancement of the nonlinear response of an ITO-based metasurface over bare ITO thin films. Our work thus enables quantitative nanophotonics design with epsilon-near-zero materials.

physics.optics↗

arXiv2020

Hyperpolarizability of plasmonic meta-atoms in metasurfaces

Plasmonic metasurfaces are promising as enablers of nanoscale nonlinear optics and flat nonlinear optical components. Nonlinear optical responses of such metasurfaces are determined by the nonlinear optical properties of individual nanostructured plasmonic meta-atoms, which are the building blocks of the metasurfaces. Unfortunately, no simple methods exist to determine the nonlinear coefficients (hyperpolarizabilities) of the meta-atoms hindering designing of nonlinear metasurfaces. Here, we develop the equivalent RLC circuit model of such meta-atoms to estimate their second-order nonlinear optical parameter i.e. the first-order hyperpolarizability in the optical spectral range. In parallel, we extract from second-harmonic generation experiments the spectrum of the 1st-order hyperpolarizabilities of individual meta-atoms consisting of asymmetrically shaped (elongated) plasmonic nanoprisms. Moreover, we verify our results using nonlinear hydrodynamic-FDTD and with calculations based on nonlinear scattering theory. All three approaches: analytical, experimental, and computational, yield results that agree very well. Our empirical RLC model can thus be used as a simple tool to enable efficient design of nonlinear plasmonic metasurfaces.

physics.optics↗