arXiv subjects

Antonio Esau Del Rio Castillo

Publications and source records attributed to Antonio Esau Del Rio Castillo.

15 recordsLinked to original sources

arXiv2020

Anisotropic layer-by-layer carbon nanotubes/boron nitride/rubber composite and its application in electromagnetic shielding

Multifunctional polymer composites with anisotropic properties are attracting interests as they fulfil the growing demand of multitasking materials. In this work, anisotropic polymer composites are fabricated by combining the layer-by-layer (LBL) filtration method with the alternative assembling of carbon nanotubes (CNTs) and hexagonal boron nitride flakes (hBN) on natural rubber latex particles (NR). The layered composites exhibit anisotropic thermal and electrical conductivities, which are tailored through the layer formulations. The best composite consists of four layers of NR modified with 8 phr (parts per Hundred Rubber) CNTs (~7.4 wt%) and four alternated layers with 12 phr hBN (~10.7 wt%). The composites exhibit an electromagnetic interference (EMI) shielding effectiveness of 22.41+-0.14 dB mm-1 at 10.3 GHz and a thermal conductivity equal to 0.25 W/(mK). Furthermore, when the layered composite is used as an electrical thermal heater the surface reaches a stable temperature of ~103 C in approx. 2 min, with an input bias of 2.5 V.

cond-mat.mtrl-sci↗

arXiv2020

Flexible Graphene/Carbon Nanotube Electrochemical Double-Layer Capacitors with Ultrahigh Areal Performance

The fabrication of electrochemical double-layer capacitors (EDLCs) with high areal capacitance relies on the use of elevated mass loadings of highly porous active materials. Herein, we demonstrate a high-throughput manufacturing of graphene/nanotubes hybrid EDLCs. Wet-jet milling (WJM) method is exploited to exfoliate the graphite into single/few-layer graphene flakes (WJM-G) in industrial volume (production rate ~0.5 kg/day). Commercial single/double walled carbon nanotubes (SDWCNTs) are mixed with graphene flakes in order to act as spacers between the graphene flakes during their film formation. The latter is obtained by one-step vacuum filtration, resulting in self-standing, metal- and binder-free flexible EDLC electrodes with high active material mass loadings up to 30 mg cm-2. The corresponding symmetric WJM-G/SDWCNTs EDLCs exhibit electrode energy densities of 539 uWh cm-2 at 1.3 mW cm-2 and operating power densities up to 532 mW cm-2 (outperforming most of the EDLC technologies). The EDCLs show excellent cycling stability and outstanding flexibility even under highly folded states (up to 180 degrees). The combination of industrial-like production of active materials, simplified manufacturing of EDLC electrodes, and ultrahigh areal performance of the as-produced EDLCs are promising for novel advanced EDLC designs.

physics.app-ph↗

arXiv2020

Single-step exfoliation and functionalization of few-layers black phosphorus and its application for polymer composites

We demonstrate the large scale exfoliation of bulk black phosphorus into few-layers black phosphorus. We use wet-jet mill (WJM) as an industrially scalable exfoliation technique. In order to avoid the degradation by oxidation of the exfoliated flakes, the few-layers black phosphorus is protected by functionalisation (with 4-bromobenzene-diazonium tetrafluoroborate) during the exfoliation process. We used the exfoliated and functionalised flakes as fillers in a polymethyl methacrylate matrix to test the mechanical endurance, obtaining an improvement in the Young modulus of 106% compared to the bare polymer. These data support the development of black phosphorus materials as 2D-polymer fillers and performance-enhancers.

physics.app-ph↗

arXiv2019

Engineered MoSe2-based heterostructures for efficient electrochemical hydrogen evolution reaction

Two-dimensional transition metal-dichalcogenides are emerging as efficient and cost-effective electrocatalysts for hydrogen evolution reaction (HER). However, only the edge sites of their trigonal prismatic phase show HER-electrocatalytic properties, while the basal plane, which is absent of defective/unsaturated sites, is inactive. Here, we tackle the key challenge that is increasing the number of electrocatalytic sites by designing and engineering heterostructures composed of single-/few-layer MoSe2 flakes and carbon nanomaterials (graphene or single-wall carbon nanotubes (SWNTs)) produced by solution processing. The electrochemical coupling between the materials that comprise the heterostructure effectively enhances the HER-electrocatalytic activity of the native MoSe2 flakes. The optimization of the mass loading of MoSe2 flakes and their electrode assembly via monolithic heterostructure stacking provided a cathodic current density of 10mAcm-2 at overpotential of 100mV, a Tafel slope of 63mVdec-1 and an exchange current density (j0) of 0.203 Acm-2. In addition, electrode thermal annealing in a hydrogen environment and chemical bathing in n-butyllithium are exploited to texturize the basal planes of the MoSe2 flakes (through Se-vacancies creation) and to achieve in situ semiconducting-to-metallic phase conversion, respectively, thus they activate new HER-electrocatalytic sites. The as-engineered electrodes show a 4.8-fold enhancement of j0 and a decrease in the Tafel slope to 54mVdec-1.

cond-mat.mtrl-sci↗

arXiv2019

Thioethyl-porphyrazine/Nanocarbon Hybrids for Photoinduced Electron Transfer

We designed a novel pyrene-substituted thioethyl-porphyrazine (PzPy) and the formation of supramolecular assembly with nanocarbons demonstrating photoinduced electron transfer ability. As revealed by spectroscopic and electrochemical studies, PzPy displays wide spectral absorption in the visible range, charge separation upon photoexcitation, as well as bandgap and highest occupied/lowest unoccupied molecular orbital (HOMO/LUMO) energy values, matching the key requirements of organic optoelectronic. Moreover, the presence of a pyrene moiety promotes attractive interactions with pi-conjugated systems. In particular, theoretical calculations show that in the PzPy the HOMO and LUMO are localized on different positions of the molecule, i.e., the HOMO on the pyrene moiety and the LUMO on the macrocycle. Therefore, HOMO-LUMO excitation gives rise to a charge separation, preventing excitons recombination. Two kinds of non-covalent hybrid composites are prepared by mixing the PzPy with single wall carbon nanotubes (SWNTs) and graphene nanoflakes (GNFs), respectively, and used for photocurrent generation through charge transfer processes between PzPy and nanocarbons. Photoconduction experiments show photocurrent generation upon visible light irradiation of both PzPy/SWNT and PzPy/GNF composites (0.78 and 0.71 mA/W at 500 nm, respectively), demonstrating their suitability for optoelectronic applications and light harvesting systems.

physics.chem-ph↗

arXiv2019

Scalable production of graphene inks via wet-jet milling exfoliation for screen-printed micro-supercapacitors

The miniaturization of energy storage units is pivotal for the development of next-generation portable electronic devices. Micro-supercapacitors (MSCs) hold a great potential to work as on-chip micro-power sources and energy storage units complementing batteries and energy harvester systems. The scalable production of supercapacitor materials with cost-effective and high-throughput processing methods is crucial for the widespread application of MSCs. Here, we report wet-jet milling exfoliation of graphite to scale-up the production of graphene as supercapacitor material. The formulation of aqueous/alcohol-based graphene inks allows metal-free, flexible MSCs to be screen-printed. These MSCs exhibit areal capacitance (Careal) values up to 1.324 mF cm-2 (5.296 mF cm-2 for a single electrode), corresponding to an outstanding volumetric capacitance (Cvol) of 0.490 F cm-3 (1.961 F cm-3 for a single electrode). The screen-printed MSCs can operate up to power density above 20 mW cm-2 at energy density of 0.064 uWh cm-2. The devices exhibit excellent cycling stability over charge-discharge cycling (10000 cycles), bending cycling (100 cycles at bending radius of 1 cm) and folding (up to angles of 180°). Moreover, ethylene vinyl acetate-encapsulated MSCs retain their electrochemical properties after a home-laundry cycle, providing waterproof and washable properties for prospective application in wearable electronics.

physics.app-ph↗

arXiv2019

Doped-MoSe2 nanoflakes/3d metal oxide-hydr(oxy)oxides hybrid catalysts for pH-universal electrochemical hydrogen evolution reaction

Clean hydrogen production through efficient and cost-effective electrochemical water splitting is highly promising to meeting future global energy demands. The design of Earth-abundant materials with both high activity for hydrogen evolution reaction (HER) and electrochemical stability in both acidic and alkaline environments summarize the outcomes needed for practical applications. Here, we report a non-noble 3d metal Cl-chemical doping of liquid phase exfoliated single/few-layer flakes of MoSe2 for creating MoSe2 nanoflakes/3d metal oxide-hydr(oxy)oxide hybrid HER-catalysts. We propose that the electron-transfer from MoSe2 nanoflakes to metal cations and the chlorine complexation-induced both neutralization, as well as the in situ formation of metal oxide-hydr(oxy)oxides on MoSe2 nanoflake's surface, tailor the proton affinity of the derived catalysts, increasing the number and HER-kinetic of their active sites in both acidic and alkaline electrolytes. The electrochemical coupling between the doped-MoSe2 nanoflakes/metal oxide-hydr(oxy)oxide hybrids and single-walled carbon nanotubes heterostructures further accelerates the HER process. Lastly, monolithic stacking of multiple heterostructures is reported as a facile electrode assembly strategy to achieve overpotential for a cathodic current density of 10mAcm-2 of 0.081V and 0.064V in 0.5M H2SO4 and 1M KOH, respectively. This opens up new opportunities to address the current density vs. overpotential requirements targeted in pH-universal H2 production.

cond-mat.mtrl-sci↗

arXiv2019

Biotransformation and biological impact of graphene and graphene oxide during simulated oral ingestion

Graphene is an innovative nanomaterial, made of two-dimensional honeycomb-like carbon lattice, with potential in many different applications. Studying the behaviour of graphene-related materials (GRMs) in biological systems is, therefore, crucial to assess possible side effects. In this work is studied the biotransformation and biological impact of few-layer pristine graphene (FLG) and graphene oxide (GOX), following ingestion as exposure route. To mimic FLG and GOX ingestion, an in vitro digestion assay based on a standardized operating procedure (SOP) is applied. The assay simulates the human ingestion of GRMs during their dynamic passage through the different environments of gastrointestinal (GI) tract (salivary, gastric, intestinal). Physical-chemical changes of GRMs during the digestion process are assessed through a detailed Raman spectroscopy characterization. Moreover, the effect of chronic exposure to digested GRMs on integrity and functionality of an in vitro model of intestinal barrier is also determined according to a second SOP. Our results showed that the FLG and GOX nanoflakes aggregates after experiencing the passage through the different environments of GI tract, with evident doping effects, due to the interaction of GRMs with digestive juice components and the strong pH variations. Interestingly, neither structural changes nor degradation of the nanomaterials is observed, suggesting that GRMs are bio-persistent nanomaterials when administered by oral route. Chronic exposure to digested GRMs does not affect intestinal barrier integrity and is not associated to inflammation and cytotoxicity, though possible long-term adverse effects cannot be ruled out, due to the observed bio-durability of the materials.

cond-mat.soft↗

arXiv2019

Liquid-phase exfoliated indium-selenide flakes and their application in hydrogen evolution reaction

Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging from 30 nm to a few um, and thicknesses ranging from 1 to 20 nm, with a max population centred at ~ 5 nm, corresponding to 4 Se-In-In-Se quaternary layers. We also show that no formation of further InSe-based compounds (such as In2Se3) or oxides occurs during the exfoliation process. The potential of these exfoliated-InSe few-layer flakes as a catalyst for hydrogen evolution reaction (HER) is tested in hybrid single-walled carbon nanotubes/InSe heterostructures. We highlight the dependence of the InSe flakes morphologies, i.e., surface area and thickness, on the HER performances achieving best efficiencies with small flakes offering predominant edge effects. Our theoretical model unveils the origin of the catalytic efficiency of InSe flakes, and correlates the catalytic activity to the Se vacancies at the edge of the flakes.

cond-mat.mtrl-sci↗

arXiv2018

Exfoliation of Few-Layer Black Phosphorus in Low-Boiling-Point Solvents and Its Application in Li-Ion Batteries

The liquid-phase exfoliation (LPE) of black phosphorus (BP) is a strategic route for the large-scale production of phosphorene and few-layer BP (FL-BP) flakes. The exploitation of this exfoliated material in cutting-edge technologies, e.g., in flexible electronics and energy storage, is however limited by the fact that the LPE of BP is usually carried out at a high boiling point and in toxic solvents. In fact, the solvent residual is detrimental to device performance in real applications; thus, complete solvent removal is critical. Here, we tackle these issues by exfoliating BP in different low boiling-point solvents. Among these solvents, we find that acetone also provides a high concentration of exfoliated BP, leading to the production of FL-BP flakes with an average lateral size and thickness of c.a. 30 and 7 nm, respectively. The use of acetone to produce less defective few-layer BP flakes (FL-BPacetone) from bulk crystals is a straightforward process which enables the rapid preparation of homogeneous thin films thanks to the fast solvent evaporation. The ratio of edge to bulk atoms for the BP flakes here produced, combined with the use of low-boiling-point solvents for the exfoliation process suggests that these thin films are promising anodes for lithium-ion batteries. To this end, we tested Li-ion half cells with FL-BPacetone anodes achieving a reversible specific capacity of 480 mAh/g at a current density of 100 mA/g, over 100 charge/discharge cycles. Moreover, a reversible specific capacity of 345 mAh/g is achieved for the FL-BPacetone-based anode at a high current density (i.e., 1 A/g). These findings indicate that the FL-BPacetone-based battery is promising with regards to the design of fast charge/discharge devices. Overall, the presented process is a step forward toward the fabrication of phosphorene-based devices.

cond-mat.mtrl-sci↗

arXiv2018

Solution-processed hybrid graphene flake/2H-MoS2 quantum dot heterostructures for efficient electrochemical hydrogen evolution

We designed solution-processed, flexible hybrid graphene flake/2H-MoS2 quantum dot (QD) heterostructures, showing enhanced electrocatalytic activity for the hydrogen evolution reaction (HER) with respect to their native individual components. The 2H-MoS2 QDs are produced through a scalable, environmentally friendly, one-step solvothermal approach from two-dimensional (2D) 2H-MoS2 flakes obtained by liquid phase exfoliation (LPE) of their bulk counterpart in 2-Propanol. This QDs synthesis avoids the use of high boiling point and/or toxic solvents. Graphene flakes are produced by LPE of graphite in N-Methyl-2-pyrrolidone. The electrochemical properties of 2H-MoS2 QDs and their HER-favorable chemical and electronic coupling with graphene enable to reach a current density of 10 mA/cm^2 at an overpotential of 136 mV, surpassing the performances of graphene flake/2H-MoS2 (1T-MoS2) flake heterostructures. Our approach provides a shortcut, viable and cost-effective method for enhancing the 2D materials electrocatalytic properties.

cond-mat.mtrl-sci↗

arXiv2018

Graphene-Based Hole Selective Layers for High-Efficiency, Solution-Processed, Large-Area, Flexible, Hydrogen-Evolving Organic Photocathodes

Regio-regular poly(3-hexylthiophene-2,5-diyl) (rr-P3HT), the work-horse of organic photovoltaics, has been recently exploited in bulk heterojunction (BHJ) configuration with phenyl-C61-butyric acid methyl ester (PCBM) for solution-processed hydrogen-evolving photocathodes, reaching cathodic photocurrents at 0 V vs. RHE (J0V vs RHE) of up to 8 mA cm-2. The photoelectrochemical performance of these photocathodes strongly depends on the presence of the electron (ESL) and hole (HSL) selective layer. While TiO2 and its sub-stoichiometric phases are consolidated ESL materials, the currently used HSLs (e.g., MoO3, CuI, PEDOTT:PSS, WO3) suffer electrochemical degradation under hydrogen evolution reaction (HER)-working conditions. In this work, we use solution-processed graphene derivatives as HSL to boost efficiency and durability of rr-P3HT:PCBM-based photocathodes, demonstrating record-high performance. In fact, our devices show cathodic J0V vs RHE of 6.01 mA cm-2, onset potential (Vo) of 0.6 V vs. RHE, ratiometric power-saved efficiency (ϕsaved) of 1.11% and operational activity of 20 hours in 0.5 M H2SO4 solution. Moreover, the designed photocathodes are effectively working in different pH environments ranging from acid to basic. This is pivotal for their exploitation in tandem configurations, where photoanodes operate only in restricted electrochemical conditions. Furthermore, we demonstrate the scalability of our all-solution processed approach by fabricating a large-area (~9 cm2) photocathode on flexible substrate, achieving remarkable cathodic J0V vs RHE of 2.8 mA cm-2, Vo of 0.45 V vs. RHE and ϕsaved of 0.31%. This is the first demonstration of high-efficient rr-P3HT:PCBM flexible photocathodes based on low-cost and solution-processed manufacturing techniques.

physics.app-ph↗

arXiv2018

Few-layer MoS2 flakes as hole-selective layer for solution-processed hybrid organic hydrogen-evolving photocathodes

High-efficiency organic photocathodes, based on regioregular poly(3-hexylthiophene) and phenyl-C61-butyric acid methyl ester (rr-P3HT:PCBM) bulk heterojunction sandwiched between charge-selective layers, are emerging as efficient and low-cost devices for solar hydrogen production by water splitting. Nevertheless, stability issues of the materials used as charge-selective layers are hampering the realization of long-lasting photoelectrodes, pointing out the need to investigate novel and stable materials. Here, we propose MoS2 nano-flakes, produced by Li-aided exfoliation of bulk counterpart, as efficient atomic-thick hole-selective layer for rr-P3HT:PCBM-based photocathodes. We carried out a p-type chemical doping to tune on-demand the MoS2 Fermi level in order to match the highest occupied molecular orbital level of the rr-P3HT, thus easing the hole collection at the electrode. The as-prepared p-doped MoS2-based photocathodes reached a photocurrent of 1.21 mA cm-2 at 0 V vs. RHE, a positive onset potential of 0.56 V vs. RHE and a power-saved figure of merit of 0.43%, showing a 6.1-fold increase with respect to pristine MoS2-based photocathodes, under simulated 1 Sun illumination. Operational activity of the photocathodes over time and under 1 Sun illumination revealed a progressive stabilization of the photocurrents at 0.49 mA cm-2 at 0 V vs. RHE. These results pave the way towards the exploitation of layered crystals as efficiency-boosters for scalable hybrid organic H2-evolving photoelectrochemical cells.

physics.app-ph↗

arXiv2018

High-yield production of 2D crystals by wet-jet milling

Efficient and scalable production of two-dimensional (2D) materials is required to overcome technological hurdles towards the creation of a 2D-materials-based industry. Here, we present a novel approach developed for the exfoliation of layered crystals, i.e., graphite, hexagonal boron nitride and transition metal dichalcogenides. The process is based on high-pressure wet-jet-milling (WJM), resulting in 2 L/hr production of 10 g/L of single- and few-layer 2D crystal flakes in dispersion making the scaling-up more affordable. The WJM process enables the production of defect-free and high-quality 2D-crystal dispersions on a large scale, opening the way for the full exploitation in different commercial applications, e.g., anodes active material in lithium ion batteries, reinforcement in polymer-graphene composites, and transparent conductors as we demonstrate in this report.

cond-mat.mtrl-sci↗

arXiv2016

Thermal Stability and Anisotropic Sublimation of Two-Dimensional Colloidal Bi2Te3 and Bi2Se3 Nanocrystals

The structural and compositional stabilities of two dimensional 2D Bi2Te3 and Bi2Se3 nanocrystals, produced by both colloidal synthesis and by liquid phase exfoliation, were studied by in situ transmission electron microscopy TEM during annealing at temperatures between 350 and 500 C. The sublimation process induced by annealing is structurally and chemically anisotropic and takes place through the preferential dismantling of the prismatic 011-0 type planes, and through the preferential sublimation of Te or Se.

physics.chem-ph↗