arXiv subjects

Antonio J. R. da Silva

Publications and source records attributed to Antonio J. R. da Silva.

17 recordsLinked to original sources

arXiv2018

A tight-binding model for the band dispersion in rhombohedral topological insulators over the whole Brilluoin zone

We put forward a tight-binding model for rhombohedral topological insulators materials with the space group $D^{5}_{3d}(R\bar{3}m)$. The model describes the bulk band structure of these materials over the whole Brillouin zone. Within this framework, we also describe the topological nature of surface states, characterized by a Dirac cone-like dispersion and the emergence of surface projected bulk states near to the Dirac-point in energy. We find that the breaking of the $R_{3}$ symmetry as one moves away from the $Γ$ point has an important role in the hybridization of the $p_x$, $p_y$, and $p_z$ atomic orbitals. In our tight-binding model, the latter leads to a band mixing matrix element ruled by a single parameter. We show that our model gives a good description of the strategies/mechanisms proposed in the literature to eliminate and/or energy shift the bulk states away from the Dirac point, such as stacking faults and the introduction of an external applied electric field.

cond-mat.mes-hall↗

arXiv2014

Topological Phases in Triangular Lattices of Ru Adsorbed on Graphene: ab-initio calculations

We have performed an ab initio investigation of the electronic properties of the graphene sheet adsorbed by Ru adatoms (Ru/graphene). For a particular set of triangular arrays of Ru adatoms, we find the formation of four (spin-polarized) Dirac cones attributed to a suitable overlap between two hexagonal lattices: one composed by the C sites of the graphene sheet, and the other formed by the surface potential induced by the Ru adatoms. Upon the presence of spin-orbit coupling (SOC) nontrivial band gaps take place at the Dirac cones promoting several topological phases. Depending on the Ru concentration, the system can be topologically characterized among the phases i) Quantum Spin Hall (QSH), ii) Quantum Anomalous Hall (QAH), iii) metal iv) or trivial insulator. For each concentration, the topological phase is characterized by the ab-initio calculation of the Chern number.

cond-mat.mes-hall↗

arXiv2013

Interfaces between buckling phases in Silicene: Ab initio density functional theory calculations

The buckled structure of silicene leads to the possibility of new kinds of line defects that separate regions with reversed buckled phases. In the present work we show that these new grain boundaries have very low formation energies, one order of magnitude smaller than grain boundaries in graphene. These defects are stable along different orientations, and they can all be differentiated by STM images. All these defects present local dimerization between the Si atoms, with the formation of $π$-bonds. As a result, these defects are preferential adsorption sites when compared to the pristine region. Thus, the combination of low formation energy and higher reactivity of these defects may be cleverly used to design new nano-structures embedded in silicene.

cond-mat.mtrl-sci↗

arXiv2010

Systematic investigation of a family of gradient-dependent functionals for solids

Eleven density functionals are compared with regard to their performance for the lattice constants of solids. We consider standard functionals, such as the local-density approximation and the Perdew-Burke-Ernzerhof (PBE) generalized-gradient approximation (GGA), as well as variations of PBE GGA, such as PBEsol and similar functionals, PBE-type functionals employing a tighter Lieb-Oxford bound, and combinations thereof. Several of these variations are proposed here for the first time. On a test set of 60 solids we perform a system-by-system analysis for selected functionals and a full statistical analysis for all of them. The impact of restoring the gradient expansion and of tightening the Lieb-Oxford bound is discussed, and confronted with previous results obtained from other codes, functionals or test sets. No functional is uniformly good for all investigated systems, but surprisingly, and pleasingly, the simplest possible modifications to PBE turn out to have the most beneficial effect on its performance. The atomization energy of molecules was also considered and on a testing set of six molecules, we found that the PBE functional is clearly the best, the others leading to strong overbinding.

cond-mat.mtrl-sci↗

arXiv2009

Formation of Atomic Carbon Chains from Graphene Nanoribbons

The formation of one-dimensional carbon chains from graphene nanoribbons is investigated using it ab initio molecular dynamics. We show under what conditions it is possible to obtain a linear atomic chain via pulling of the graphene nanoribbons. The presence of dimers composed of two-coordinated carbon atoms at the edge of the ribbons is necessary for the formation of the linear chains, otherwise there is simply the full rupture of the structure. The presence of Stone-Wales defects close to these dimers may lead to the formation of longer chains. The local atomic configuration of the suspended atoms indicates the formation of single and triple bonds, which is a characteristic of polyynes.

cond-mat.mtrl-sci↗

arXiv2009

Gradient-dependent density functionals of the PBE type for atoms, molecules and solids

One of the standard generalized-gradient approximations (GGAs) in use in modern electronic-structure theory, PBE, and a recently proposed modification designed specifically for solids, PBEsol, are identified as particular members of a family of functionals taking their parameters from different properties of homogeneous or inhomogeneous electron liquids. Three further members of this family are constructed and tested, together with the original PBE and PBEsol, for atoms, molecules and solids. We find that PBE, in spite of its popularity in solid-state physics and quantum chemistry, is not always the best performing member of the family, and that PBEsol, in spite of having been constructed specifically for solids, is not the best for solids. The performance of GGAs for finite systems is found to sensitively depend on the choice of constraints steaming from infinite systems. Guidelines both for users and for developers of density functionals emerge from this work.

cond-mat.mtrl-sci↗

arXiv2007

Theoretical study of N-complexes in carbon nanotubes

We have made a systematic theoretical study to determine which are the most stable structures for substitutional nitrogen defects in carbon nanotubes, by making total energy calculations via DFT. These calculations were made for a (5,5) and a (8,0) nanotube to check the influence of chirality and for a graphene sheet, to check the limit of infinite diameter. In all these systems, we found that either substitutional nitrogen or structures containing two vacancies surrounded by four pyridine-like rings have the lowest formation energy, depending on the value of the nitrogen chemical potential. These defects have lower formation energies in nanotubes than in the graphene sheet.

cond-mat.other↗

arXiv2006

Simple implementation of complex functionals: scaled selfconsistency

We explore and compare three approximate schemes allowing simple implementation of complex density functionals by making use of selfconsistent implementation of simpler functionals: (i) post-LDA evaluation of complex functionals at the LDA densities (or those of other simple functionals); (ii) application of a global scaling factor to the potential of the simple functional; and (iii) application of a local scaling factor to that potential. Option (i) is a common choice in density-functional calculations. Option (ii) was recently proposed by Cafiero and Gonzalez. We here put their proposal on a more rigorous basis, by deriving it, and explaining why it works, directly from the theorems of density-functional theory. Option (iii) is proposed here for the first time. We provide detailed comparisons of the three approaches among each other and with fully selfconsistent implementations for Hartree, local-density, generalized-gradient, self-interaction corrected, and meta-generalized-gradient approximations, for atoms, ions, quantum wells and model Hamiltonians. Scaled approaches turn out to be, on average, better than post-approaches, and unlike these also provide corrections to eigenvalues and orbitals. Scaled selfconsistency thus opens the possibility of efficient and reliable implementation of density functionals of hitherto unprecedented complexity.

cond-mat.mtrl-sci↗

arXiv2006

Hf defects in HfO2/Si

We investigate the possibility that Hf defects exist in the Si channel of HfO2 Si-based metal-oxide-semiconductor devices. We have studied, using ab initio Density Functional Theory calculations, substitutional and interstitial Hf impurities in c-Si, for various charge states. Our results indicate that 1) the tetrahedral interstitial defect is energetically more favorable than the substitutional, and 2) there are various stable charge states in the Si gap. The possible presence of these charged impurities in the Si channel could lead to a mobility reduction, due to coulombic scattering.

cond-mat.mtrl-sci↗

arXiv2005

Orientational Defects in Ice Ih: An Interpretation of Electrical Conductivity Measurements

We present a first-principles study of the structure and energetics of Bjerrum defects in ice Ih and compare the results to experimental electrical conductivity data. While the DFT result for the activation energy is in good agreement with experiment, we find that its two components have quite different values. Aside from providing new insight into the fundamental parameters of the microscopic electrical theory of ice, our results suggest the activity of traps in doped ice in the temperature regime typically assumed to be controlled by the free migration of L defects.

cond-mat.mtrl-sci↗

arXiv2005

Oxygen clamps in gold nanowires

We investigate how the insertion of an oxygen atom in an atomically thin gold nanowire can affect its rupture. We find, using ab initio total energy density functional theory calculations, that O atoms when inserted in gold nanowires form not only stable but also very strong bonds, in such a way that they can extract atoms from a stable tip, serving in this way as a clamp that could be used to pull a string of gold atoms.

cond-mat.mes-hall↗

arXiv2005

Disorder and the effective Mn-Mn exchange interaction in Ga$_{1-x}$Mn$_x$As diluted magnetic semiconductors

We perform a theoretical study, using {\it ab initio} total energy density-functional calculations, of the effects of disorder on the $Mn-Mn$ exchange interactions for $Ga_{1-x}Mn_xAs$ diluted semiconductors. For a 128 atoms supercell, we consider a variety of configurations with 2, 3 and 4 Mn atoms, which correspond to concentrations of 3.1%, 4.7%, and 6.3%, respectively. In this way, the disorder is intrinsically considered in the calculations. Using a Heisenberg Hamiltonian to map the magnetic excitations, and {\it ab initio} total energy calculations, we obtain the effective $\JMn$, from first ($n=1$) all the way up to sixth ($n=6$) neighbors. Calculated results show a clear dependence in the magnitudes of the $\JMn$ with the Mn concentration $x$. Also, configurational disorder and/or clustering effects lead to large dispersions in the Mn-Mn exchange interactions, in the case of fixed Mn concentration. Moreover, theoretical results for the ground-state total energies for several configurations indicate the importance of a proper consideration of disorder in treating temperature and annealing effects.

cond-mat.mtrl-sci↗

arXiv2004

Bundling up carbon nanotubes through Wigner defects

We show, using ab initio total energy density functional theory, that the so-called Wigner defects, an interstitial carbon atom right besides a vacancy, which are present in irradiated graphite can also exist in bundles of carbon nanotubes. Due to the geometrical structure of a nanotube, however, this defect has a rather low formation energy, lower than the vacancy itself, suggesting that it may be one of the most important defects that are created after electron or ion irradiation. Moreover, they form a strong link between the nanotubes in bundles, increasing their shear modulus by a sizeable amount, clearly indicating its importance for the mechanical properties of nanotube bundles.

cond-mat.mtrl-sci↗

arXiv2003

Diffusion-reaction mechanisms of nitriding species in SiO2

We study using first-principles total-energy calculations, diffusion-reaction processes involved in the thermal nitridation of SiO2. We consider NO, NH, N2 and atomic N in different charge states as the nitriding species in alpha-quartz. Our results show that none of neutral species react with the SiO2 network remaining at interstitial sites. Therefore, they are likely to diffuse through the oxide, incorporating nitrogen at near-interface (Si/SiO2) regions. Whereas, charged species are trapped by the network, nitriding bulk SiO2. For the diffusing species, we find that NH and atomic N show increasing diffusivities with temperatures, whereas for NO and N2 they are relatively constant. This result agree well with the finding of higher N concentration at the Si/SiO2 interface obtained by thermal processing of SiO2 in NH3 as compared with those obtained in N2O. Finally, we discuss spin-dependent incorporation reaction mechanisms of NH and atomic N with the SiO2 network.

cond-mat.mtrl-sci↗

arXiv2003

A possible route to grow a (Mn:Si(1-x)Gex)-based diluted magnetic semiconductor

We systematically investigate, using ab initio density-functional theory calculations, the properties of interstitial and substitutional Mn in both Si and Ge, as well as in the Si(1-x)Gex alloy. We show that volume effects are not the main reason Mn prefers to be a subsitutional impurity in pure Ge, and chemical effects, therefore, play an important role. Using realistic models of Si(1-x)Gex, we show that for x approximately greater than 0.16 substitutional Mn in Ge-rich neighborhoods become more stable than interstitial Mn, which may allow the growth of Si-based diluted magnetic semiconductors.

cond-mat.mtrl-sci↗

arXiv2003

Comparative study of defect energetics in HfO2 and SiO2

We perform ab initio calculations, based on density functional theory, of substitutional and vacancy defects in the monoclinic hafnium oxide (m-HfO2) and alpha-quartz (SiO2). The neutral oxygen vacancies and substitutional Si and Hf defects in HfO2 and SiO2, respectively, are investigated. Our calculations show that, for a large range of Hf chemical potential, Si substitutional defects are most likely to form in HfO2, leading to the formation of a silicate layer at the HfO2/Si interface. We also find that it is energetically more favorable to form oxygen vacancies in SiO2 than in HfO2, which implies that oxygen deficient HfO2 grown on top of SiO2 will consume oxygen from the SiO2.

cond-mat.mtrl-sci↗

arXiv2001

Electron correlation in the Si(100) surface

Motivated by the controversy between quantum chemists and solid-state physicists, and by recent experimental results, spin-polarized density-functional (DFT) calculations are used to probe electron correlation in the Si(100) reconstructed surface. The ground state displays antiferromagnetic spin polarization for low dimer inclinations indicating, not magnetic order, but the importance of Mott-like correlations among dangling bonds. The lowest energy corresponds to a higher dimer inclination with no spin. DFT energies, however, should be taken with caution here. Our results together with quantum-chemical findings suggest dimers with highly correlated electrons that tend to buckle due to interactions with other dimers.

cond-mat.mtrl-sci↗