arXiv subjects

Antonio Palermo

Publications and source records attributed to Antonio Palermo.

17 recordsLinked to original sources

arXiv2025

Nonreciprocal parametric amplification of elastic waves in supersonic space-time modulated media

Space-time modulated elastic media, whose material properties vary in both space and time, have attracted significant attention as a promising strategy for achieving nonreciprocal propagation of elastic waves. To date, most studies have focused on systems with subsonic modulation, where the phase velocity of the modulation wave is lower than that of the guided elastic waves. In contrast, wave propagation under supersonic modulation remains largely unexplored, and the associated nonreciprocal phenomena present an open challenge. In this work, we investigate the dynamic response of elastic longitudinal waves propagating through a spatially bounded medium subjected to supersonic modulation of its elastic properties. We show that supersonic modulation gives rise to directional wavenumber bandgaps in the dispersion diagram, characterized by vanishing wavenumbers. Using a theoretical framework based on mode-coupling theory, we reveal how supersonic modulation governs amplitude modulation and frequency conversion in wave transmission and reflection at spatial interfaces. This leads to nonreciprocal parametric amplification and frequency conversion, phenomena not previously reported in bounded elastic media. Remarkably, the observed parametric amplification is not driven by an imaginary component of the wavenumber, but instead arises from the interference between counter-propagating Floquet-Bloch modes at spatial interfaces. Numerical simulations corroborate the theoretical predictions and illustrate nonreciprocal amplification and frequency conversion effects. Our findings pave the way for the design of nonreciprocal elastic wave devices with advanced functionalities such as signal processing, energy amplification, and frequency conversion.

physics.app-ph↗

arXiv2025

Nonreciprocal scattering of elastic waves at time interfaces induced by spatiotemporal modulation

Spatiotemporally modulated elastic metamaterials have garnered increasing interest for their potential applications in nonreciprocal wave devices. Most existing studies, however, focus on systems where spatiotemporal modulation is continuous and infinite in time. Here, we investigate the temporal dynamics of elastic waves at time interfaces created by the sudden activation or deactivation of spatiotemporal modulation in a medium's elastic properties. By developing an ad hoc mode-coupling theory, we reveal that such time interfaces enable controlled frequency and wavenumber conversion through mode redistribution and energy pumping. Specifically, we quantitatively evaluate the temporal scattering behavior of elastic longitudinal waves under two representative spatiotemporal modulations: subsonic and supersonic. These modulations give rise to frequency and wavenumber bandgaps, respectively. We demonstrate that subsonic modulation induces nonreciprocal energy reversal, while supersonic modulation leads to nonreciprocal energy amplification. Our findings pave the way for the development of temporal elastic metamaterials with practical applications in designing one-way elastic filters, amplifiers, and frequency converters.

physics.app-ph↗

arXiv2024

Controlling surface acoustic waves (SAWs) via temporally graded metasurfaces

In this manuscript, the temporal rainbow effect for surface acoustic waves (SAW) is illustrated through a temporal analog of space metagradings. We show that a time-modulated array of mechanical resonators induces a wavenumber-preserving frequency transformation which, in turn, dictates Rayleigh-to-Shear wave conversion. The process is unfolded through the adiabatic theorem, which allows us to delineate the transition between a solely frequency-converted wave packet and a temporally-driven mode conversion. In other words, our paper explores the role of time modulation in the context of elastic metasurfaces, and we envision our implementation to be suitable for designing a new family of SAW devices with frequency conversion, mode conversion, and unusual transport capabilities.

physics.app-ph↗

arXiv2024

Time-modulated inerters as building blocks for nonreciprocal mechanical devices

In this work, we discuss the realization of mechanical devices with non-reciprocal attributes enabled by inertia-amplifying, time-modulated mechanisms. Our fundamental building-block features a mass, connected to a fixed ground through a spring and to a moving base through a mechanism-based inerter. Through analytical derivations and numerical simulations, we provide details on the nonlinear dynamics of such system. We demonstrate that providing a time modulation to the inerter's base produces two additions on the dynamics of the main spring-mass oscillator: i) an effective time-modulated mass term, and ii) a time varying force term; both quantities are functions of the modulating frequency. With specific choices of parameters, the modulation-induced force term -- that represents one of the main drawbacks in most experimental realizations of purely time-modulated systems -- vanishes and we are left with an effective time-varying mass. We then illustrate that this building block can be leveraged to realize non-reciprocal wave manipulation devices, and concentrate on a non-reciprocal beam-like waveguide. The simple design and the clean performance of our system makes it an attractive candidate for the realization of fully mechanical non-reciprocal devices.

physics.class-ph↗

arXiv2023

A multiple scattering formulation for elastic wave propagation in space-time modulated metamaterials

Space-time modulation of material parameters offers new possibilities for manipulating elastic wave propagation by exploiting time-reversal symmetry breaking. Here we propose and validate a general framework based on the multiple scattering theory to model space-time modulated elastic metamaterials, namely elastic waveguides equipped with modulated resonators. The formulation allows to consider an arbitrary distribution of resonators with a generic space-time modulation profile and compute the wavefield within and outside the resonators' region. Additionally, under appropriate assumptions, the same framework can be exploited to predict the waveguide dispersion relation. We demonstrate the capabilities of our formulation by revisiting the dynamics of two representative space-time modulated systems, e.g. the non-reciprocal propagation of (i) flexural waves along a metabeam and (ii) surface acoustic waves along a metasurface. Given its flexibility, the proposed method can pave the way towards the design of novel devices able to realize unidirectional transport of elastic energy for vibration isolation, signal processing and energy harvesting purposes.

physics.app-ph↗

arXiv2022

Topological edge states of quasiperiodic elastic metasurfaces

In this work, we investigate the dynamic behavior and the topological properties of quasiperiodic elastic metasurfaces, namely arrays of mechanical oscillators arranged over the free surface of an elastic half-space according to a quasiperiodic spatial distribution. An ad-hoc multiple scattering formulation is developed to describe the dynamic interaction between Rayleigh waves and a generic array of surface resonators. The approach allows to calculate the spectrum of natural frequencies of the quasiperiodic metasurface which reveals a fractal distribution of the frequency gaps reminiscent of the Hofstadter butterfly. These gaps have nontrivial topological properties and can host Rayleigh-like edge modes. We demonstrate that such topologically protected edge modes can be driven from one boundary to the opposite of the array by a smooth variation of the phason, a parameter which modulates the geometry of the array. Topological elastic waveguides designed on these principles provide new opportunities in surface acoustic wave engineering for vibration control, energy harvesting, and lossless signal transport, among others.

physics.app-ph↗

arXiv2021

Stress-optimized inertial amplified metastructure with opposite chirality for vibration attenuation

In this work, we investigate the dynamics and attenuation properties of a one-dimensional inertial amplified lattice with opposite chirality. The unit cell of the structure consists of a hollow-square plate connected to a ring through arch-like ligaments. The peculiar geometry and orientation of the links allow for coupling the axial and the torsional motion of the lattice, thus amplifying the inertia of the system. We develop both simplified analytical and numerical models of the building block to derive the complex dispersion relation of the infinite lattice. The structure supports a frequency-tailorable attenuation zone, whose lower bound is controlled by the second coupled axial-torsional mode. Laboratory measurements of the transmission spectrum on a 3D printed sample match very well with the analytical and numerical predictions, confirming the wide-band filtering properties of this lattice. We complete our investigation by developing and solving a constrained optimization model to obtain the optimized geometric parameters of the unit cell that minimize the bandgap opening frequency and, at the same time, fulfill structural requirements. In particular, the internal stresses induced by the self-weight of the structure are kept to a low by virtue of the employed design, with the aim to prevent plastic deformations and failure. The inertial amplification mechanism, proposed and investigated in this work, offers an efficient variant for the efficient design of materials and structures for vibration mitigation and shock protection.

physics.app-ph↗

arXiv2021

A multiple scattering formulation for finite-size flexural metasurfaces

We provide an analytical formulation to model the propagation of elastic waves in a homogeneous half-space supporting an array of thin plates. The technique provides the displacement field obtained from the interaction between an incident wave generated by a harmonic source and the scattered fields induced by the flexural motion of the plates. The scattered field generated by each plate is calculated using an ad-hoc set of Green's functions. The interaction between the incident field and the scattered fields is modeled through a multiple scattering formulation. Owing to the introduction of the multiple scattering formalism, the proposed technique can handle a generic set of plates arbitrarily arranged on the half-space surface. The method is validated via comparison with finite element simulations considering Rayleigh waves interacting with a single and a collection of thin plates. Our framework can be used to investigate the interaction of vertically polarized surface waves and flexural resonators in different engineering contexts, from the design of novel surface acoustic wave devices to the interpretation of urban vibrations problems.

physics.app-ph↗

arXiv2021

Mitigation of Rayleigh-like waves in granular media via multi-layer resonant metabarriers

In this work, we experimentally and numerically investigate the propagation and attenuation of vertically polarized surface waves in an unconsolidated granular medium equipped with small-scale metabarriers of different depths, i.e., arrays composed of one, two, and three embedded layers of sub-wavelength resonators. Our findings reveal how such a multi-layer arrangement strongly affects the attenuation of the surface wave motion within and after the barrier. When the surface waves collide with the barriers, the wavefront is back-scattered and steered downward underneath the oscillators. Due to the stiffness gradient of the granular medium, part of the wavefield is then rerouted to the surface level after overcoming the resonant array. Overall, the in-depth insertion of additional layers of resonators leads to a greater and broader band wave attenuation when compared to the single layer case.

physics.geo-ph↗

arXiv2021

Rayleigh wave propagation in nonlinear metasurfaces

We investigate the propagation of Rayleigh waves in a half-space coupled to a nonlinear metasurface. The metasurface consists of an array of nonlinear oscillators attached to the free surface of a homogeneous substrate. We describe, analytically and numerically, the effects of nonlinear interaction force and energy loss on the dispersion of Rayleigh waves. We develop closed-form expressions to predict the dispersive characteristics of nonlinear Rayleigh waves by adopting a leading-order effective medium description. In particular, we demonstrate how hardening nonlinearity reduces and eventually eliminates the linear filtering bandwidth of the metasurface. Softening nonlinearity, in contrast, induces lower and broader spectral gaps for weak to moderate strengths of nonlinearity, and narrows and eventually closes the gaps at high strengths of nonlinearity. We also observe the emergence of a spatial gap (in wavenumber) in the in-phase branch of the dispersion curves for softening nonlinearity. Finally, we investigate the interplay between nonlinearity and energy loss and discuss their combined effects on the dispersive properties of the metasurface. Our analytical results, supported by finite element simulations, demonstrate the mechanisms for achieving tunable dispersion characteristics in nonlinear metasurfaces.

physics.app-ph↗

arXiv2021

Lamb's problem for a half-space coupled to a generic distribution of oscillators at the surface

We propose an analytical framework to model the effect of single and multiple mechanical surface oscillators on the dynamics of vertically polarized elastic waves propagating in a semi-infinite medium. The formulation extends the canonical Lamb's problem, originally developed to obtain the wavefield induced by a harmonic line source in an elastic half-space, to the scenario where a finite cluster of vertical oscillators is attached to the medium surface. In short, our approach utilizes the solution of the classical Lamb's problem as Green's function to formulate the multiple scattered fields generated by the resonators. For an arbitrary number of resonators, arranged atop the elastic half-space in an arbitrary configuration, the displacement fields are obtained in closed-form and validated with numerics developed in a two-dimensional finite element environment.

physics.app-ph↗

arXiv2020

Surface wave non-reciprocity via time-modulated metamaterials

We investigate how Rayleigh waves interact with modulated resonators located on the free surface of a semi-infinite elastic medium. We begin by studying the dynamics of a single resonator with time-modulated stiffness. In particular, we evaluate the accuracy of an analytical approximation of the resonator response and identify the parameter ranges in which its behavior remains stable. Then, we develop an analytical model to describe the interaction between surface waves and an array of resonators with spatio-temporally modulated stiffness. By combining our analytical models with full-scale numerical simulations, we demonstrate that spatio-temporal stiffness modulation of this elastic metasurface leads to the emergence of non-reciprocal features in the Rayleigh wave spectrum. Specifically, we show how the frequency content of a propagating signal can be filtered and converted when traveling through the modulated medium, and illustrate how surface-to-bulk wave conversion plays a role in these phenomena. Throughout this article, we indicate bounds of modulation parameters for which our theory is reliable, thus providing guidelines for future experimental studies on the topic.

physics.app-ph↗

arXiv2020

A flexible spiraling-metasurface as a versatile haptic interface

Haptic feedback is the most significant sensory interface following visual cues. Developing thin, flexible surfaces that function as haptic interfaces is important for augmenting virtual reality, wearable devices, robotics and prostheses. For example, adding a haptic feedback interface to prosthesis could improve their acceptance among amputees. State of the art programmable interfaces targeting the skin feel-of-touch through mechano-receptors are limited by inadequate sensory feedback, cumbersome mechanisms or narrow frequency of operation. Here, we present a flexible metasurface as a generic haptic interface capable of producing complex tactile patterns on the human skin at wide range of frequencies. The metasurface is composed of multiple "pixels" that can locally amplify both input displacements and forces. Each of these pixels encodes various deformation patterns capable of producing different sensations on contact. The metasurface can transform a harmonic signal containing multiple frequencies into a complex preprogrammed tactile pattern. Our findings, corroborated by user studies conducted on human candidates, can open new avenues for wearable and robotic interfaces.

physics.app-ph↗

arXiv2019

Locally resonant metasurfaces for shear waves in granular media

In this article the physics of horizontally polarized shear waves travelling across a locally resonant metasurface in an unconsolidated granular medium is experimentally and numerically explored. The metasurface is comprised of an arrangement of sub-wavelength horizontal mechanical resonators embedded in silica microbeads. The metasurface supports a frequency-tailorable attenuation zone induced by the translational mode of the resonators. The experimental and numerical findings reveal that the metasurface not only backscatters part of the energy, but also redirects the wavefront underneath the resonators leading to a considerable amplitude attenuation at the surface level, when all the resonators have similar resonant frequency. A more complex picture emerges when using resonators arranged in a so-called graded design, e.g., with a resonant frequency increasing/decreasing throughout the metasurface. Unlike Love waves propagating in a bi-layer medium, shear waves localized at the surface of our metasurface are not converted into bulk waves. Although a detachment from the surface occurs, the depth-dependent velocity profile of the granular medium prevents the mode-conversion, steering again the horizontally polarized shear waves towards the surface. The outcomes of our experimental and numerical studies allow for understanding the dynamics of wave propagation in resonant metamaterials embedded in vertically inhomogeneous soils and, therefore, are essential for improving the design of engineered devices for ground vibration and seismic wave containment.

physics.geo-ph↗

arXiv2019

Mitigation of seismic waves: metabarriers and metafoundations bench tested

The article analyses two potential metamaterial designs, the metafoundation and the metabarrier, capable to attenuate seismic waves on buildings or structural components in a frequency band between 3.5 to 8 Hz. The metafoundation serves the dual purpose of reducing the seismic response and supporting the superstructure. Conversely the metabarrier surrounds and shields the structure from incoming waves. The two solutions are based on a cell layout of local resonators whose dynamic properties are tuned using finite element simulations combined with Bloch-Floquet boundary conditions. To enlarge the attenuation band, a graded design where the resonant frequency of each cell varies spatially is employed. If appropriately enlarged or reduced, the metamaterial designs could be used to attenuate lower frequency seismic waves or groundborne vibrations respectively. A sensitivity analysis over various design parameters including size, number of resonators, soil type and source directivity, carried out by computing full 3D numerical simulations in time domain for horizontal shear waves is proposed. Overall, the metamaterial solutions discussed here can reduce the spectral amplification of the superstructure between approx. 15 to 70% depending on several parameters including the metastructure size and the properties of the soil. Pitfalls and advantages of each configuration are discussed in detail. The role of damping, crucial to avoid multiple resonant coupling, and the analogies between graded metamaterials and tuned mass dampers is also investigated.

physics.geo-ph↗

arXiv2016

Designing Perturbative Metamaterials from Discrete Models: From Veselago lenses to topological insulators

Discrete models provide concise descriptions of complex physical phenomena, such as negative refraction, topological insulators, and Anderson localization. While there are multiple tools to obtain discrete models that demonstrate particular phenomena, it remains a challenge to find metamaterial designs that replicate the behavior of desired nontrivial discrete models. Here we solve this problem by introducing a new class of metamaterial, which we term 'perturbative metamaterial', consisting of weakly interacting unit cells. The weak interaction allows us to associate each element of the discrete model (individual masses and springs) to individual geometric features of the metamaterial, thereby enabling a systematic design process. We demonstrate our approach by designing 2D mechanical metamaterials that realize Veselago lenses, zero-dispersion bands, and topological insulators. While our selected examples are within the mechanical domain, the same design principle can be applied to acoustic, thermal, and photonic metamaterials composed of weakly interacting unit cells.

cond-mat.mtrl-sci↗

arXiv2015

Composite 3D-printed meta-structures for low frequency and broadband vibration absorption

Architected materials that control elastic wave propagation are essential in vibration mitigation and sound attenuation. Phononic crystals and acoustic metamaterials use band gap engineering to forbid certain frequencies from propagating through a material. However, existing solutions are limited in the low frequency regimes and in their bandwidth of operation because they require impractical sizes and masses. Here, we present a class of materials (labeled elastic meta-structures) that supports the formation of wide and low frequency band gaps, while simultaneously reducing their global mass. To achieve these properties, the meta-structures combine local resonances with structural modes of a periodic architected lattice. While the band gaps in these meta-structures are induced by Bragg scattering mechanisms, their key feature is that the band gap size and frequency range can be controlled and broadened through local resonances, which is linked to changes in the lattice geometry. We demonstrate these principles experimentally, using novel additive manufacturing methods, and inform our designs using finite element simulations. This design strategy has a broad range of applications, including control of structural vibrations, noise and shock mitigation.

cond-mat.mtrl-sci↗