arXiv subjects

Antonio Politano

Publications and source records attributed to Antonio Politano.

At least 19 recordsLinked to original sources

arXiv2025

Unconventional Materials for Light Dark Matter Detection

We propose the use of several unconventional materials as detectors for dark matter with mass beneath the MeV scale. These include the transition-metal dichalcogenide TiSe$_2$ hosting a low-energy plasmon in the charge-density-wave phase, Sr$_2$RuO$_4$ containing a low-energy acoustic demon mode, and hole-doped diamond with tunable optical and acoustic plasmon frequencies. We perform first-principles density functional theory computations of their loss functions at non-vanishing momenta and establish their reach into light dark matter parameter space. We show that due to intense low-energy plasmon modes -- of different microscopic origin in each -- the reach of detectors based on these materials could surpass existing proposals by several orders of magnitude for both dark matter scattering and absorption on electrons. The anisotropic response of these materials, which enables directional detection, renders them exceptionally strong detector candidates, motivating the design and fabrication of future devices.

hep-ph↗

arXiv2023

Observation of highly anisotropic bulk dispersion and spin-polarized topological surface states in CoTe2

We present CoTe2 as a new type-II Dirac semimetal supporting Lorentz symmetry violating Dirac fermions in the vicinity of the Fermi energy. By combining first principle ab-initio calculations with experimental angle-resolved photo-emission spectroscopy results, we show the CoTe2 hosts a pair of type-II Dirac fermions around 90 meV above the Fermi energy. In addition to the bulk Dirac fermions, we find several topological band inversions in bulk CoTe2, which gives rise to a ladder of spin-polarized surface states over a wide range of energies. In contrast to the surface states which typically display Rashba-type in-plane spin splitting, we find that CoTe2 hosts novel out-of-plane spin polarization as well. Our work establishes CoTe2 as a potential candidate for the exploration of Dirac fermiology and applications in spintronic devices, infrared plasmonics, and ultrafast optoelectronics.

cond-mat.mtrl-sci↗

arXiv2023

Discovery of a magnetic Dirac system with large intrinsic non-linear Hall effect

Magnetic materials exhibiting topological Dirac fermions are attracting significant attention for their promising technological potential in spintronics. In these systems, the combined effect of the spin-orbit coupling and magnetic order enables the realization of novel topological phases with exotic transport properties, including the anomalous Hall effect and magneto-chiral phenomena. Herein, we report experimental signature of topological Dirac antiferromagnetism in TaCoTe2 via angle-resolved photoelectron spectroscopy (ARPES) and first-principles density functional theory (DFT) calculations. In particular, we find the existence of spin-orbit coupling-induced gaps at the Fermi level, consistent with the manifestation of a large intrinsic non-linear Hall conductivity. Remarkably, we find that the latter is extremely sensitive to the orientation of the Néel vector, suggesting TaCoTe2 a suitable candidate for the realization of non-volatile spintronic devices with an unprecedented level of intrinsic tunability.

cond-mat.str-el↗

arXiv2022

Collective plasmonic modes in the chiral multifold fermionic material CoSi

Plasmonics in topological semimetals offers exciting opportunities for fundamental physics exploration as well as for technological applications. Here, we investigate plasmons in the exemplar chiral crystal CoSi, which hosts a variety of multifold fermionic excitations. We show that CoSi hosts two distinct plasmon modes in the infrared regime at 0.1 eV and 1.1 eV in the long-wavelength limit. The 0.1 eV plasmon is found to be highly dispersive, and originates from intraband collective oscillations associated with a double spin-1 excitation, while the 1.1 eV plasmon is dispersionless and it involves interband correlations. Both plasmon modes lie outside the particle-hole continuum and possess long lifetime. Our study indicates that the CoSi class of materials will provide an interesting materials platform for exploring fundamental and technological aspects of topological plasmonics.

cond-mat.mtrl-sci↗

arXiv2021

Photonic Topological Transitions and Epsilon-Near-Zero Surface Plasmons in Type-II Dirac Semimetal NiTe$_2$

Compared to artificial metamaterials, where nano-fabrication complexities and finite-size inclusions can hamper the desired electromagnetic response, several natural materials like van der Waals crystals hold great promise for designing efficient nanophotonic devices in the optical range. Here, we investigate the unusual optical response of NiTe$_2$, a van der Waals crystal and a type-II Dirac semimetal hosting Lorentz-violating Dirac fermions. By {\it ab~initio~} density functional theory modeling, we show that NiTe$_2$ harbors multiple topological photonic regimes for evanescent waves (such as surface plasmons) across the near-infrared and optical range. By electron energy-loss experiments, we identify surface plasmon resonances near the photonic topological transition points at the epsilon-near-zero (ENZ) frequencies $\approx 0.79$, $1.64$, and $2.22$ eV. Driven by the extreme crystal anisotropy and the presence of Lorentz-violating Dirac fermions, the experimental evidence of ENZ surface plasmon resonances confirm the non-trivial photonic and electronic topology of NiTe$_2$. Our study paves the way for realizing devices for light manipulation at the deep-subwavelength scales based on electronic and photonic topological physics for nanophotonics, optoelectronics, imaging, and biosensing applications.

cond-mat.mtrl-sci↗

arXiv2021

Magnetic Topological Semimetal Phase with Electronic Correlation Enhancement in SmSbTe

The ZrSiS family of compounds hosts various exotic quantum phenomena due to the presence of both topological nonsymmorphic Dirac fermions and nodal-line fermions. In this material family, the LnSbTe (Ln= lanthanide) compounds are particularly interesting owing to the intrinsic magnetism from magnetic Ln which leads to new properties and quantum states. In this work, the authors focus on the previously unexplored compound SmSbTe. The studies reveal a rare combination of a few functional properties in this material, including antiferromagnetism with possible magnetic frustration, electron correlation enhancement, and Dirac nodal-line fermions. These properties enable SmSbTe as a unique platform to explore exotic quantum phenomena and advanced functionalities arising from the interplay between magnetism, topology, and electronic correlations.

cond-mat.mtrl-sci↗

arXiv2019

Low-energy type-II Dirac fermions and spin-polarized topological surface states in transition-metal dichalcogenide NiTe$_2$

Using spin- and angle- resolved photoemission spectroscopy (spin-ARPES) together with ${\it ab~initio}$ calculations, we demonstrate the existence of a type-II Dirac semimetal state in NiTe$_2$. We show that, unlike PtTe$_2$, PtSe$_2$, and PdTe$_2$, the Dirac node in NiTe$_2$ is located in close vicinity of the Fermi energy. Additionally, NiTe$_2$ also hosts a pair of band inversions below the Fermi level along the $Γ-A$ high-symmetry direction, with one of them leading to a Dirac cone in the surface states. The bulk Dirac nodes and the ladder of band inversions in NiTe$_2$ support unique topological surface states with chiral spin texture over a wide range of energies. Our work paves the way for the exploitation of the low-energy type-II Dirac fermions in NiTe$_2$ in the fields of spintronics, THz plasmonics and ultrafast optoelectronics.

cond-mat.mes-hall↗

arXiv2019

A novel undamped gapless plasmon mode in tilted type-II Dirac semimetal

We predict the existence of a novel long-lived gapless plasmon mode in a type-II Dirac semimetal (DSM). This gapless mode arises from the out-of-phase oscillations of the density fluctuations in the electron and the hole pockets of a type-II DSM. It originates beyond a critical wave-vector along the direction of the tilt axis, owing to the momentum separation of the electron and hole pockets. A similar out-of-phase plasmon mode arises in other multi-component charged fluids as well, but generally it is Landau damped and lies within the particle-hole continuum. In the case of a type-II DSM, the open Fermi surface prohibits low-energy finite momentum single-particle excitations, creating a `gap' in the particle-hole continuum. The gapless plasmon mode lies within this particle-hole continuum gap and, thus, it is protected from Landau damping.

cond-mat.mes-hall↗

arXiv2019

Optoelectronic devices, plasmonics and photonics with topological insulators

Topological insulators are innovative materials with semiconducting bulk together with surface states forming a Dirac cone, which ensure metallic conduction in the surface plane. Therefore, topological insulators represent an ideal platform for optoelectronics and photonics. The recent progress of science and technology based on topological insulators enables the exploitation of their huge application capabilities. Here, we review the recent achievements of optoelectronics, photonics and plasmonics with topological insulators. Plasmonic devices and photodetectors based on topological insulators in a wide energy range, from Terahertz to the ultraviolet, promise outstanding impact. Furthermore, the peculiarities, the range of applications and the challenges of the emerging fields of topological photonics and thermoplasmonics are discussed.

physics.app-ph↗

arXiv2019

Plasmonics with two-dimensional semiconductors "beyond graphene": from basic research to technological applications

In this minireview, we explore the main features and the prospect of plasmonics with two-dimensional semiconductors. Plasmonic modes in each class of van der Waals semiconductors have their own peculiarities, along with potential technological capabilities. Plasmons of transition-metal dichalcogenides share features typical of graphene, due to their honeycomb structure, but with damping processes dominated by intraband rather than interband transitions, unlike graphene. Spin-orbit coupling strongly affects the plasmonic spectrum of buckled honeycomb lattices (silicene and germanene), while the anisotropic lattice of phosphorene determines different propagation of plasmons along the armchair and zigzag direction. We also review existing applications of plasmonics with two-dimensional materials in the fields of thermoplasmonics, biosensing, and plasma-wave Terahertz detection. Finally, we consider the capabilities of van der Waals heterostructures for innovative low-loss plasmonic devices.

cond-mat.mes-hall↗

arXiv2019

Liquid-phase exfoliated indium-selenide flakes and their application in hydrogen evolution reaction

Single- and few-layered InSe flakes are produced by the liquid-phase exfoliation of beta-InSe single crystals in 2-propanol, obtaining stable dispersions with a concentration as high as 0.11 g/L. Ultracentrifugation is used to tune the morphology, i.e., the lateral size and thickness of the as-produced InSe flakes. We demonstrate that the obtained InSe flakes have maximum lateral sizes ranging from 30 nm to a few um, and thicknesses ranging from 1 to 20 nm, with a max population centred at ~ 5 nm, corresponding to 4 Se-In-In-Se quaternary layers. We also show that no formation of further InSe-based compounds (such as In2Se3) or oxides occurs during the exfoliation process. The potential of these exfoliated-InSe few-layer flakes as a catalyst for hydrogen evolution reaction (HER) is tested in hybrid single-walled carbon nanotubes/InSe heterostructures. We highlight the dependence of the InSe flakes morphologies, i.e., surface area and thickness, on the HER performances achieving best efficiencies with small flakes offering predominant edge effects. Our theoretical model unveils the origin of the catalytic efficiency of InSe flakes, and correlates the catalytic activity to the Se vacancies at the edge of the flakes.

cond-mat.mtrl-sci↗

arXiv2019

Near-field terahertz probes with room-temperature nanodetectors for subwavelength resolution imaging

Near-field imaging with terahertz (THz) waves is emerging as a powerful technique for fundamental research in photonics and across physical and life sciences. Spatial resolution beyond the diffraction limit can be achieved by collecting THz waves from an object through a small aperture placed in the near-field. However, light transmission through a sub-wavelength size aperture is fundamentally limited by the wave nature of light. Here, we conceive a novel architecture that exploits inherently strong evanescent THz field arising within the aperture to mitigate the problem of vanishing transmission. The sub-wavelength aperture is originally coupled to asymmetric electrodes, which activate the thermo-electric THz detection mechanism in a transistor channel made of flakes of black-phosphorus or InAs nanowires. The proposed novel THz near-field probes enable room-temperature sub-wavelength resolution coherent imaging with a 3.4 THz quantum cascade laser, paving the way to compact and versatile THz imaging systems and promising to bridge the gap in spatial resolution from the nanoscale to the diffraction limit.

physics.app-ph↗

arXiv2019

Black phosphorus nanodevices at terahertz frequencies: photodetectors and future challenges

The discovery of graphene triggered a rapid rise of unexplored two-dimensional materials and heterostructures having optoelectronic and photonics properties that can be tailored on the nanoscale. Among these materials, black phosphorus (BP) has attracted a remarkable interest thanks to many favorable properties, such as high carrier mobility, in-plane anisotropy, the possibility to alter its transport via electrical gating and direct band-gap, that can be tuned by thickness from 0.3 eV (bulk crystalline) to 1.7 eV (single atomic layer). When integrated in a microscopic field effect transistor (FET), a few-layer BP flake can detect Terahertz (THz) frequency radiation. Remarkably, the in-plane crystalline anisotropy can be exploited to tailor the mechanisms that dominate the photoresponse; a BP-based field effect transistor can be engineered to act as a plasma-wave rectifier, a thermoelectric sensor or a thermal bolometer. Here we present a review on recent research on BP detectors operating from 0.26 THz to 3.4 THz with particular emphasis on the underlying physical mechanisms and the future challenges that are yet to be addressed for making BP the active core of stable and reliable optical and electronic technologies.

physics.app-ph↗

arXiv2019

Thermoelectric terahertz photodetectors based on selenium-doped black phosphorus flakes

Chemical doping of bulk black phosphorus is a well-recognized way to reduce surface oxidation and degradation. Here, we report on the fabrication of terahertz frequency detectors consisting of an antenna-coupled field-effect transistor (FET) with an active channel of Se-doped black phosphorus. Our devices show a maximum room-temperature hole mobility of 1780 cm2V-1s-1 in a SiO2-encapsulated FET. A room-temperature responsivity of 3 V/W was observed, with a noise-equivalent power of 7 nWHz-1/2 at 3.4 THz, comparable with the state-of-the-art room-temperature photodetectors operating at the same frequency. Therefore, the inclusion of Se dopants in the growth process of black phosphorus crystals enables the optimization of the transport and optical performances of FETs in the far-infrared with a high potential for the development of BP-based electro-optical devices. We also demonstrate that the flake thickness can be tuned according to the target application. Specifically, thicker flakes (>80 nm) are suitable for applications in which high mobility and high speed are essential, thinner flakes (<10 nm) are more appropriate for applications requiring high on/off ratios, while THz photodetection is optimal with flakes 30-40 nm thick, due to the larger carrier density tunability.

cond-mat.mes-hall↗

arXiv2018

Tunable surface plasmons in Weyl semimetals TaAs and NbAs

By means of high-resolution electron energy loss spectroscopy, we investigate the low-energy excitation spectrum of transition-metal monopnictides hosting Weyl fermions. We observe gapped plasmonic modes in (001)-oriented surfaces of single crystals of NbAs and TaAs at 66 and 68 meV, respectively. Our findings are consistent with theory and we estimate an effective Coulomb interaction strength $α_{\rm eff}\approx0.41$ for both samples. We also demonstrate that the modification of the surface of transition-metal monopnictides by the adsorption of chemical species (in our case, oxygen and hydrocarbon fragments) changes the frequency of the plasmonic excitations, with a subsequent modification of the effective interaction strength in the 0.30-0.48 range. The remarkable dependence of plasmonic features on the presence of adsorbates paves the way for plasmonic sensors based on Weyl semimetals operating in the mid-infrared.

cond-mat.mes-hall↗

arXiv2018

Broadband excitation spectrum of bulk crystals and thin layers of PtTe$_2$

We explore the broadband excitation spectrum of bulk PtTe$_2$ using electron energy loss spectroscopy and density functional theory. In addition to infrared modes related to intraband 3D Dirac plasmon and interband transitions between the 3D Dirac bands, we observe modes at 3.9, 7.5 and 19.0 eV in the ultraviolet region. The comparison of the excitation spectrum with the calculated orbital-resolved density of states allows us to ascribe spectral features to transitions between specific electronic states. Additionally, we study the thickness dependence of the high-energy plasmon in the PtTe2 thin films. We show that, unlike graphene, the high-energy plasmon in PtTe2 thin film gets red-shifted by 2.5 eV with increasing thickness.

cond-mat.mes-hall↗

arXiv2018

Heterostructured hBN-BP-hBN Nanodetectors at THz Frequencies

Artificial semiconductor heterostructures played a pivotal role in modern electronic and photonic technologies, providing a highly effective mean for the manipulation and control of carriers, from the visible to the Terahertz (THz) frequency range. Despite the exceptional versatility, they commonly require challenging epitaxial growth procedures due to the need of clean and abrupt interfaces, which proved to be a major obstacle for the realization of room-temperature (RT), high-efficiency devices, like source, detectors or modulators, especially in the far-infrared. Two-dimensional (2D) layered materials, like graphene and phosphorene, recently emerged as a reliable, flexible and versatile alternative for devising efficient RT detectors operating at Terahertz frequencies. We here combine the benefit of the heterostructure architecture with the exceptional technological potential of 2D layered nanomaterials; by reassembling the thin isolated atomic planes of hexagonal borum nitride (hBN) with a few layer phosphorene (black phosphorus (BP)) we mechanically stacked hBN/BP/hBN heterostructures to devise high-efficiency THz photodetectors operating in the 0.3-0.65 THz range from 4K to 300K with a record SNR=20000.

cond-mat.mes-hall↗

arXiv2018

Black-Phosphorus Terahertz Photodetectors

The discovery of graphene and the related fascinating capabilities have triggered an unprecedented interest in inorganic two-dimensional (2D) materials. Despite the impressive impact in a variety of photonic applications, the absence of energy gap has hampered its broader applicability in many optoelectronic devices. The recent advance of novel 2D materials, such as transition-metal dichalcogenides or atomically thin elemental materials, (e.g. silicene, germanene and phosphorene) promises a revolutionary step-change. Here we devise the first room-temperature Terahertz (THz) frequency detector exploiting few-layer phosphorene, e.g., a 10 nm thick flake of exfoliated crystalline black phosphorus (BP), as active channel of a field-effect transistor (FET). By exploiting the direct band gap of BP to fully switch between insulating and conducting states and by engineering proper antennas for efficient light harvesting, we reach detection performance comparable with commercial detection technologies, providing the first technological demonstration of a phosphorus-based active THz device.

cond-mat.other↗