arXiv subjects

Antonio Ragagnin

Publications and source records attributed to Antonio Ragagnin.

31 records · Page 2Linked to original sources

arXiv2022

Cosmological simulations with rare and frequent dark matter self-interactions

Dark matter (DM) with self-interactions is a promising solution for the small-scale problems of the standard cosmological model. Here we perform the first cosmological simulation of frequent DM self-interactions, corresponding to small-angle DM scatterings. The focus of our analysis lies in finding and understanding differences to the traditionally assumed rare DM (large-angle) self scatterings. For this purpose, we compute the distribution of DM densities, the matter power spectrum, the two-point correlation function and the halo and subhalo mass functions. Furthermore, we investigate the density profiles of the DM haloes and their shapes. We find that overall large-angle and small-angle scatterings behave fairly similarly with a few exceptions. In particular, the number of satellites is considerably suppressed for frequent compared to rare self-interactions with the same cross-section. Overall we observe that while differences between the two cases may be difficult to establish using a single measure, the degeneracy may be broken through a combination of multiple ones. For instance, the combination of satellite counts with halo density or shape profiles could allow discriminating between rare and frequent self-interactions. As a by-product of our analysis, we provide - for the first time - upper limits on the cross-section for frequent self-interactions.

astro-ph.CO↗

arXiv2022

Galaxies in the central regions of simulated galaxy clusters

In this paper, we assess the impact of numerical resolution and of the implementation of energy input from AGN feedback models on the inner structure of cluster sub-haloes in hydrodynamic simulations. We compare several zoom-in re-simulations of a sub-sample of the cluster-sized haloes studied in Meneghetti et al. (2020), obtained by varying mass resolution, softening length and AGN energy feedback scheme. We study the impact of these different setups on the subhalo abundances, their radial distribution, their density and mass profiles and the relation between the maximum circular velocity, which is a proxy for subhalo compactness. Regardless of the adopted numerical resolution and feedback model, subhaloes with masses Msub < 1e11Msun/h, the most relevant mass-range for galaxy-galaxy strong lensing, have maximum circular velocities ~30% smaller than those measured from strong lensing observations of Bergamini et al. (2019). We also find that simulations with less effective AGN energy feedback produce massive subhaloes (Msub> 1e11 Msun/h ) with higher maximum circular velocity and that their Vmax - Msub relation approaches the observed one. However the stellar-mass number count of these objects exceeds the one found in observations and we find that the compactness of these simulated subhaloes is the result of an extremely over-efficient star formation in their cores, also leading to larger-than-observed subhalo stellar mass. We conclude that simulations are unable to simultaneously reproduce the observed stellar masses and compactness (or maximum circular velocities) of cluster galaxies. Thus, the discrepancy between theory and observations that emerged from the analysis of Meneghetti et al. (2020) persists. It remains an open question as to whether such a discrepancy reflects limitations of the current implementation of galaxy formation models or the LCDM paradigm.

astro-ph.CO↗

arXiv2022

The probability of galaxy-galaxy strong lensing events in hydrodynamical simulations of galaxy clusters

Meneghetti et al. (2020) recently reported an excess of galaxy-galaxy strong lensing (GGSL) in galaxy clusters compared to expectations from the LCDM cosmological model. Theoretical estimates of the GGSL probability are based on the analysis of numerical hydrodynamical simulations in the LCDM cosmology. We quantify the impact of the numerical resolution and AGN feedback scheme adopted in cosmological simulations on the predicted GGSL probability and determine if varying these simulation properties can alleviate the gap with observations. We repeat the analysis of Meneghetti et al. (2020) on cluster-size halos simulated with different mass and force resolutions and implementing several independent AGN feedback schemes. We find that improving the mass resolution by a factor of ten and twenty-five, while using the same galaxy formation model that includes AGN feedback, does not affect the GGSL probability. We find similar results regarding the choice of gravitational softening. On the contrary, adopting an AGN feedback scheme that is less efficient at suppressing gas cooling and star formation leads to an increase in the GGSL probability by a factor between three and six. However, we notice that such simulations form overly massive subhalos whose contribution to the lensing cross-section would be significant while their Einstein radii are too large to be consistent with the observations. The primary contributors to the observed GGSL cross-sections are subhalos with smaller masses, that are compact enough to become critical for lensing. The population with these required characteristics appears to be absent in simulations.

astro-ph.CO↗

arXiv2022

Unequal-mass mergers of dark matter haloes with rare and frequent self-interactions

Dark matter (DM) self-interactions have been proposed to solve problems on small length scales within the standard cold DM cosmology. Here, we investigate the effects of DM self-interactions in merging systems of galaxies and galaxy clusters with equal and unequal mass ratios. We perform N-body DM-only simulations of idealized setups to study the effects of DM self-interactions that are elastic and velocity-independent. We go beyond the commonly adopted assumption of large-angle (rare) DM scatterings, paying attention to the impact of small-angle (frequent) scatterings on astrophysical observables and related quantities. Specifically, we focus on DM-galaxy offsets, galaxy--galaxy distances, halo shapes, morphology, and the phase--space distribution. Moreover, we compare two methods to identify peaks: one based on the gravitational potential and one based on isodensity contours. We find that the results are sensitive to the peak finding method, which poses a challenge for the analysis of merging systems in simulations and observations, especially for minor mergers. Large DM-galaxy offsets can occur in minor mergers, especially with frequent self-interactions. The subhalo tends to dissolve quickly for these cases. While clusters in late merger phases lead to potentially large differences between rare and frequent scatterings, we believe that these differences are non-trivial to extract from observations. We therefore study the galaxy/star populations which remain distinct even after the DM haloes have coalesced. We find that these collisionless tracers behave differently for rare and frequent scatterings, potentially giving a handle to learn about the micro-physics of DM.

astro-ph.CO↗

arXiv2021

N-body simulations of dark matter with frequent self-interactions

Self-interacting dark matter (SIDM) models have the potential to solve the small-scale problems that arise in the cold dark matter paradigm. Simulations are a powerful tool for studying SIDM in the context of astrophysics, but it is numerically challenging to study differential cross-sections that favour small-angle scattering, as in light-mediator models. Here, we present a novel approach to model frequent scattering based on an effective drag force, which we have implemented into the N-body code gadget-3. In a range of test problems, we demonstrate that our implementation accurately models frequent scattering. Our implementation can be used to study differences between SIDM models that predict rare and frequent scattering. We simulate core formation in isolated dark matter haloes, as well as major mergers of galaxy clusters and find that SIDM models with rare and frequent interactions make different predictions. In particular, frequent interactions are able to produce larger offsets between the distribution of galaxies and dark matter in equal-mass mergers.

astro-ph.CO↗

arXiv2020

Performance and energy footprint assessment of FPGAs and GPUs on HPC systems using Astrophysics application

New challenges in Astronomy and Astrophysics (AA) are urging the need for a large number of exceptionally computationally intensive simulations. "Exascale" (and beyond) computational facilities are mandatory to address the size of theoretical problems and data coming from the new generation of observational facilities in AA. Currently, the High Performance Computing (HPC) sector is undergoing a profound phase of innovation, in which the primary challenge to the achievement of the "Exascale" is the power-consumption. The goal of this work is to give some insights about performance and energy footprint of contemporary architectures for a real astrophysical application in an HPC context. We use a state-of-the-art N-body application that we re-engineered and optimized to exploit the heterogeneous underlying hardware fully. We quantitatively evaluate the impact of computation on energy consumption when running on four different platforms. Two of them represent the current HPC systems (Intel-based and equipped with NVIDIA GPUs), one is a micro-cluster based on ARM-MPSoC, and one is a "prototype towards Exascale" equipped with ARM-MPSoCs tightly coupled with FPGAs. We investigate the behavior of the different devices where the high-end GPUs excel in terms of time-to-solution while MPSoC-FPGA systems outperform GPUs in power consumption. Our experience reveals that considering FPGAs for computationally intensive application seems very promising, as their performance is improving to meet the requirements of scientific applications. This work can be a reference for future platforms development for astrophysics applications where computationally intensive calculations are required.

astro-ph.IM↗

arXiv2020

Gadget3 on GPUs with OpenACC

We present preliminary results of a GPU porting of all main Gadget3 modules (gravity computation, SPH density computation, SPH hydrodynamic force, and thermal conduction) using OpenACC directives. Here we assign one GPU to each MPI rank and exploit both the host and accellerator capabilities by overlapping computations on the CPUs and GPUs: while GPUs asynchronously compute interactions between particles within their MPI ranks, CPUs perform tree-walks and MPI communications of neighbouring particles. We profile various portions of the code to understand the origin of our speedup, where we find that a peak speedup is not achieved because of time-steps with few active particles. We run a hydrodynamic cosmological simulation from the Magneticum project, with $2\cdot10^{7}$ particles, where we find a final total speedup of $\approx 2.$ We also present the results of an encouraging scaling test of a preliminary gravity-only OpenACC porting, run in the context of the EuroHack17 event, where the prototype of the porting proved to keep a constant speedup up to $1024$ GPUs.

astro-ph.IM↗

arXiv2019

Exposing SED Models And Snapshots Via VO Simulation Artefacts

The Virtual Observatory (VO) simulation standards, Simulation Data Model (SimDM) and Simulation Data Access Layer (SimDAL), establish a framework for the discoverability and dissemination of data created in simulation projects. These standards address the complexity of having a standard access and facade for data which is expected to be multifaceted and, of a diverse range. In this paper, we detail the realisation of an application exposing the theoretical products of one such scientific project via the simulation facades proposed by the VO. The scientific project in question, is a study of the evolution of young clusters in dense molecular clumps. The theoretical products arising from this study include a grid of 20 million SED (Spectral Energy Distribution) models for synthetic young clusters and related data products. Details on the implementation of SimDAL components in the application as well as the ways in which the data structures of SimDM are incorporated onto the existing data products are provided.

cs.DL↗

arXiv2019

Dependency of halo concentration on mass, redshift and fossilness in Magneticum hydrodynamic simulations

We study the dependency of the concentration on mass and redshift using three large N-body cosmological hydrodynamic simulations carried out by the Magneticum project. We constrain the slope of the mass-concentration relation with an unprecedented mass range for hydrodynamic simulations and find a negative trend on the mass-concentration plane and a slightly negative redshift dependency, in agreement with observations and other numerical works. We also show how the concentration correlates with the fossil parameter, defined as the stellar mass ratio between the central galaxy and the most massive satellite, in agreement with observations. We find that haloes with high fossil parameter have systematically higher concentration and investigate the cause in two different ways. First we study the evolution of haloes that lives unperturbed for a long period of time, where we find that the internal region keeps accreting satellites as the fossil parameter increases and the scale radius decreases (which increases the concentration). We also study the dependency of the concentration on the virial ratio and the energy term from the surface pressure $E_s$. We conclude that fossil objects have higher concentration because they are dynamically relaxed, with no in-fall/out-fall material and had time to accrete their satellites.

astro-ph.CO↗

arXiv2018

Exploiting the Space Filling Curve Ordering of Particles in the Neighbour Search of Gadget3

Gadget3 is nowadays one of the most frequently used high performing parallel codes for cosmological hydrodynamical simulations. Recent analyses have shown t\ hat the Neighbour Search process of Gadget3 is one of the most time-consuming parts. Thus, a considerable speedup can be expected from improvements of the u\ nderlying algorithms. In this work we propose a novel approach for speeding up the Neighbour Search which takes advantage of the space-filling-curve particle ordering. Instead of performing Neighbour Search for all particles individually, nearby active particles can be grouped and one single Neighbour Search can be performed to obta\ in a common superset of neighbours. Thus, with this approach we reduce the number of searches. On the other hand, tree walks are performed within a larger searching radius. There is an optimal size of grouping that maximize the speedup, which we found by numerical experiments. We tested the algorithm within the boxes of the Magneticum project. As a result we obtained a speedup of $1.65$ in the Density and of $1.30$ in the Hydrodynamics computation, respectively, and a total speedup of $1.34.$

astro-ph.IM↗

arXiv2018

A web portal for hydrodynamical, cosmological simulations

This article describes a data center hosting a web portal for accessing and sharing the output of large, cosmological, hydro-dynamical simulations with a broad scientific community. It also allows users to receive related scientific data products by directly processing the raw simulation data on a remote computing cluster. The data center has a multi-layer structure: a web portal, a job control layer, a computing cluster and a HPC storage system. The outer layer enables users to choose an object from the simulations. Objects can be selected by visually inspecting 2D maps of the simulation data, by performing highly compounded and elaborated queries or graphically by plotting arbitrary combinations of properties. The user can run analysis tools on a chosen object. These services allow users to run analysis tools on the raw simulation data. The job control layer is responsible for handling and performing the analysis jobs, which are executed on a computing cluster. The innermost layer is formed by a HPC storage system which hosts the large, raw simulation data. The following services are available for the users: (I) {\sc ClusterInspect} visualizes properties of member galaxies of a selected galaxy cluster; (II) {\sc SimCut} returns the raw data of a sub-volume around a selected object from a simulation, containing all the original, hydro-dynamical quantities; (III) {\sc Smac} creates idealised 2D maps of various, physical quantities and observables of a selected object; (IV) {\sc Phox} generates virtual X-ray observations with specifications of various current and upcoming instruments.

astro-ph.IM↗

arXiv2016

Extreme Scale-out SuperMUC Phase 2 - lessons learned

In spring 2015, the Leibniz Supercomputing Centre (Leibniz-Rechenzentrum, LRZ), installed their new Peta-Scale System SuperMUC Phase2. Selected users were invited for a 28 day extreme scale-out block operation during which they were allowed to use the full system for their applications. The following projects participated in the extreme scale-out workshop: BQCD (Quantum Physics), SeisSol (Geophysics, Seismics), GPI-2/GASPI (Toolkit for HPC), Seven-League Hydro (Astrophysics), ILBDC (Lattice Boltzmann CFD), Iphigenie (Molecular Dynamic), FLASH (Astrophysics), GADGET (Cosmological Dynamics), PSC (Plasma Physics), waLBerla (Lattice Boltzmann CFD), Musubi (Lattice Boltzmann CFD), Vertex3D (Stellar Astrophysics), CIAO (Combustion CFD), and LS1-Mardyn (Material Science). The projects were allowed to use the machine exclusively during the 28 day period, which corresponds to a total of 63.4 million core-hours, of which 43.8 million core-hours were used by the applications, resulting in a utilization of 69%. The top 3 users were using 15.2, 6.4, and 4.7 million core-hours, respectively.

cs.DC↗

arXiv2014

Galactic outflow and diffuse gas properties at z>=1 using different baryonic feedback models

We measure and quantify properties of galactic outflows and diffuse gas at $z \geq 1$ in cosmological hydrodynamical simulations. Our novel sub-resolution model, MUPPI, implements supernova feedback using fully local gas properties, where the wind velocity and mass loading are not given as input. We find the following trends at $z = 2$ by analysing central galaxies having a stellar mass higher than $10^{9} M_{\odot}$. The outflow velocity and mass outflow rate ($\dot{M}_{\rm out}$) exhibit positive correlations with galaxy mass and with the star formation rate (SFR). However, most of the relations present a large scatter. The outflow mass loading factor ($η$) is between $0.2 - 10$. The comparison Effective model generates a constant outflow velocity, and a negative correlation of $η$ with halo mass. The number fraction of galaxies where outflow is detected decreases at lower redshifts, but remains more than $80 \%$ over $z = 1 - 5$. High SF activity at $z \sim 2 - 4$ drives strong outflows, causing the positive and steep correlations of velocity and $\dot{M}_{\rm out}$ with SFR. The outflow velocity correlation with SFR becomes flatter at $z = 1$, and $η$ displays a negative correlation with halo mass in massive galaxies. Our study demonstrates that both the MUPPI and Effective models produce significant outflows at $\sim 1 / 10$ of the virial radius; at the same time shows that the properties of outflows generated can be different from the input speed and mass loading in the Effective model. Our MUPPI model, using local properties of gas in the sub-resolution recipe, is able to develop galactic outflows whose properties correlate with global galaxy properties, and consistent with observations.

astro-ph.GA↗