arXiv subjects

Antonio Solida

Publications and source records attributed to Antonio Solida.

6 recordsLinked to original sources

arXiv2026

A Practical Implementation of Day-3 Cooperative Intersection with Automated Connected Mini-Cars

Cooperative driving enabled by connected and automated vehicles is expected to improve traffic efficiency and safety, particularly at intersections where traditional control mechanisms such as traffic lights introduce delays and unnecessary stops. Although cooperative intersection management algorithms have been widely studied, experimental demonstrations remain limited. This paper presents a real-time demonstration of cooperative intersection management using connected autonomous mini-cars. The testbed consists of multiple 1:10 scale vehicles equipped with autonomous driving capabilities and wireless communication modules that interact with a centralized controller responsible for scheduling their crossing of the intersection. Vehicles approaching the intersection exchange messages with the controller to set the appropriate mobility profile to traverse the intersection without stopping. The demonstration integrates autonomous driving, wireless communication, and cooperative control in a single experimental platform, providing a practical environment for validating cooperative intersection management concepts for future intelligent transportation systems.

cs.NI↗

arXiv2026

Feasibility Assessment of Remote Driving via Latency Analysis of ITS-G5 and Cellular Networks in the MASA Living Lab

Remote driving has gained increasing attention as a key enabler for connected and automated vehicles. Yet its practical deployment hinges on wireless networks' ability to guarantee low, predictable latency. In this paper, we present an extensive latency analysis of ITS-G5 and cellular (5G) technologies within the Modena Automotive Smart Area (MASA), a real-world, city-scale testbed equipped with a distributed intelligent transportation infrastructure. By conducting controlled experiments under varying network loads and traffic conditions, we measure network and end-to-end latency components relevant to remote driving, in which the uplink consists of a continuous video stream transmitted from the vehicle to the remote operator, and the downlink conveys control commands back to the car. Measurements conducted under diverse conditions reveal how latency and variability differ across the two technologies and how infrastructure coverage impacts video-stream transmission performance. Based on the observed latency distributions and reliability metrics, we assess the practical feasibility and safety margins of remote driving in mixed network environments. The results provide actionable insights for future teleoperation deployments and motivate hybrid communication strategies that combine the strengths of ITS-G5 and cellular networks.

cs.NI↗

arXiv2026

Experimental Insights into UDP-Based Video and Control Traffic over IEEE 802.11p ITS-G5

Vehicular applications such as cooperative driving, teleoperation, and real-time perception increasingly rely on low-latency wireless communication. In this context, ITS-G5, based on IEEE 802.11p, represents a key technology for enabling direct vehicle-to-vehicle and vehicle-to-infrastructure communication. Despite its relevance, experimental studies focusing on the performance of UDP-based traffic over IEEE 802.11p under realistic conditions remain limited. This paper presents an experimental evaluation of UDP transmission over an IEEE 802.11p ITS-G5 testbed composed of Raspberry Pi-based onboard units and commercial roadside units. The analysis investigates the impact of different modulation and coding schemes (MCS). It also evaluates two network-layer configurations (IPv4 unicast and IPv6 multicast) and the use of CAKE for active queue management. In addition to synthetic traffic generated with iPerf, the evaluation includes real-time video streaming using MPEG-TS over UDP to emulate latency-sensitive vehicular applications. Results show that the modulation scheme is the dominant factor influencing latency at low traffic loads, while the choice of transmission mode and IP version becomes increasingly significant under congested conditions. Higher-order modulations significantly reduce latency and variability, whereas IPv6 multicast exhibits greater delay dispersion than IPv4 unicast. Furthermore, active queue management does not seem to improve delay predictability. These findings provide practical insights for configuring ITS-G5 networks supporting latency-sensitive vehicular services.

cs.NI↗

arXiv2026

CAMASA: A CAM-based Dataset from the MASA Living Lab

Trajectory prediction is a key enabler of autonomous and cooperative driving systems. However, most existing benchmarks are either sensor-centric, geographically constrained, or based on synthetic mobility traces that do not capture real-world V2X communication dynamics. This paper introduces CAMASA, a large-scale infrastructure-based dataset derived from Cooperative Awareness Messages (CAMs) and Decentralized Environmental Notification Messages (DENMs) collected within the Modena Automotive Smart Area (MASA). The dataset comprises more than 40 million CAMs and 2 million DENMs recorded under authentic urban traffic conditions over multiple months. We present a rigorous preprocessing pipeline that includes filtering, pseudonym reconciliation to account for ETSI privacy-driven stationID changes, and temporal normalization to 10 Hz trajectories, suitable for motion forecasting and time-series analysis. With over 14,000 km of reconstructed vehicle paths and tens of thousands of unique station IDs, CAMASA provides a statistically significant empirical foundation for research on Cooperative Intelligent Transportation Systems (C-ITS). Beyond trajectory prediction, the dataset enables calibration of microscopic urban traffic simulators (e.g., SUMO) and supports the development of realistic Intelligent Transportation Systems (ITS) Digital Twins by jointly modeling mobility patterns and V2X communication coverage in real deployments.

cs.NI↗

arXiv2026

Demystifying VEINS: A Reality Check Against Living Lab Experiments

Safety applications in vehicle-to-everything communications and Cooperative Intelligent Transport Systems rely on reliable and timely message exchange, which in turn depends on accurate modeling of wireless signal propagation. Simulation frameworks such as VEINS are widely adopted to design and evaluate such systems before deployment; however, their realism strongly depends on the validity of the underlying channel and antenna models. This work presents an empirical validation of the VEINS simulator against real-world data collected from the MASA living laboratory. Using the default configuration, we compare Received Signal Strength Indicator (RSSI), number of messages, and attenuation of the signal. The results show that VEINS systematically overestimates the RSSI value, while losing approximately 18% of the total number of messages received compared to the MASA, revealing inconsistencies between simulation and reality. The contribution of this study is a direct comparison between simulated and real world data, establishing a quantitative basis for future calibration of VEINS parameters to improve the fidelity of VANET simulations in C-ITS safety research.

cs.PF↗

arXiv2026

Open-Source Based and ETSI Compliant Cooperative, Connected, and Automated Mini-Cars

The automotive sector is following a revolutionary path from vehicles controlled by humans to vehicles that will be fully automated, fully connected, and ultimately fully cooperative. Along this road, new cooperative algorithms and protocols will be designed and field tested, which represents a great challenge in terms of costs. In this context, in particular, moving from simulations to practical experiments requires huge investments that are not always affordable and may become a barrier in some cases. To solve this issue and provide the community with an intermediate step, we here propose the use of 1:10 scaled cooperative, autonomous, and connected mini-cars. The mini-car is equipped with a Jetson Orin board running the open Robot Operating System 2 (ROS2), sensors for autonomous operations, and a Raspberry Pi board for connectivity mounting the open source Open Stack for Car (OScar). A key aspect of the proposal is the use of OScar, which implements a full ETSI cooperative-intelligent transport systems (C-ITS) compliant stack. The feasibility and potential of the proposed platform is here demonstrated through the implementation of a case study where the Day-1 intersection collision warning (ICW) application is implemented and validated.

cs.RO↗