arXiv subjects

Anu Jagannath

Publications and source records attributed to Anu Jagannath.

At least 19 recordsLinked to original sources

arXiv2023

Bluetooth and WiFi Dataset for Real World RF Fingerprinting of Commercial Devices

RF fingerprinting is emerging as a physical layer security scheme to identify illegitimate and/or unauthorized emitters sharing the RF spectrum. However, due to the lack of publicly accessible real-world datasets, most research focuses on generating synthetic waveforms with software-defined radios (SDRs) which are not suited for practical deployment settings. On other hand, the limited datasets that are available focus only on chipsets that generate only one kind of waveform. Commercial off-the-shelf (COTS) combo chipsets that support two wireless standards (for example WiFi and Bluetooth) over a shared dual-band antenna such as those found in laptops, adapters, wireless chargers, Raspberry Pis, among others are becoming ubiquitous in the IoT realm. Hence, to keep up with the modern IoT environment, there is a pressing need for real-world open datasets capturing emissions from these combo chipsets transmitting heterogeneous communication protocols. To this end, we capture the first known emissions from the COTS IoT chipsets transmitting WiFi and Bluetooth under two different time frames. The different time frames are essential to rigorously evaluate the generalization capability of the models. To ensure widespread use, each capture within the comprehensive 72 GB dataset is long enough (40 MSamples) to support diverse input tensor lengths and formats. Finally, the dataset also comprises emissions at varying signal powers to account for the feeble to high signal strength emissions as encountered in a real-world setting.

cs.NI↗

arXiv2023

Generalization of Deep Reinforcement Learning for Jammer-Resilient Frequency and Power Allocation

We tackle the problem of joint frequency and power allocation while emphasizing the generalization capability of a deep reinforcement learning model. Most of the existing methods solve reinforcement learning-based wireless problems for a specific pre-determined wireless network scenario. The performance of a trained agent tends to be very specific to the network and deteriorates when used in a different network operating scenario (e.g., different in size, neighborhood, and mobility, among others). We demonstrate our approach to enhance training to enable a higher generalization capability during inference of the deployed model in a distributed multi-agent setting in a hostile jamming environment. With all these, we show the improved training and inference performance of the proposed methods when tested on previously unseen simulated wireless networks of different sizes and architectures. More importantly, to prove practical impact, the end-to-end solution was implemented on the embedded software-defined radio and validated using over-the-air evaluation.

cs.NI↗

arXiv2023

Embedding-Assisted Attentional Deep Learning for Real-World RF Fingerprinting of Bluetooth

A scalable and computationally efficient framework is designed to fingerprint real-world Bluetooth devices. We propose an embedding-assisted attentional framework (Mbed-ATN) suitable for fingerprinting actual Bluetooth devices. Its generalization capability is analyzed in different settings and the effect of sample length and anti-aliasing decimation is demonstrated. The embedding module serves as a dimensionality reduction unit that maps the high dimensional 3D input tensor to a 1D feature vector for further processing by the ATN module. Furthermore, unlike the prior research in this field, we closely evaluate the complexity of the model and test its fingerprinting capability with real-world Bluetooth dataset collected under a different time frame and experimental setting while being trained on another. Our study reveals a 9.17x and 65.2x lesser memory usage at a sample length of 100 kS when compared to the benchmark - GRU and Oracle models respectively. Further, the proposed Mbed-ATN showcases 16.9x fewer FLOPs and 7.5x lesser trainable parameters when compared to Oracle. Finally, we show that when subject to anti-aliasing decimation and at greater input sample lengths of 1 MS, the proposed Mbed-ATN framework results in a 5.32x higher TPR, 37.9% fewer false alarms, and 6.74x higher accuracy under the challenging real-world setting.

cs.NI↗

arXiv2022

RF Fingerprinting Needs Attention: Multi-task Approach for Real-World WiFi and Bluetooth

A novel cross-domain attentional multi-task architecture - xDom - for robust real-world wireless radio frequency (RF) fingerprinting is presented in this work. To the best of our knowledge, this is the first time such comprehensive attention mechanism is applied to solve RF fingerprinting problem. In this paper, we resort to real-world IoT WiFi and Bluetooth (BT) emissions (instead of synthetic waveform generation) in a rich multipath and unavoidable interference environment in an indoor experimental testbed. We show the impact of the time-frame of capture by including waveforms collected over a span of months and demonstrate the same time-frame and multiple time-frame fingerprinting evaluations. The effectiveness of resorting to a multi-task architecture is also experimentally proven by conducting single-task and multi-task model analyses. Finally, we demonstrate the significant gain in performance achieved with the proposed xDom architecture by benchmarking against a well-known state-of-the-art model for fingerprinting. Specifically, we report performance improvements by up to 59.3% and 4.91x under single-task WiFi and BT fingerprinting respectively, and up to 50.5% increase in fingerprinting accuracy under the multi-task setting.

cs.LG↗

arXiv2022

A Comprehensive Survey on Radio Frequency (RF) Fingerprinting: Traditional Approaches, Deep Learning, and Open Challenges

Fifth generation (5G) network and beyond envision massive Internet of Things (IoT) rollout to support disruptive applications such as extended reality (XR), augmented/virtual reality (AR/VR), industrial automation, autonomous driving, and smart everything which brings together massive and diverse IoT devices occupying the radio frequency (RF) spectrum. Along with the spectrum crunch and throughput challenges, such a massive scale of wireless devices exposes unprecedented threat surfaces. RF fingerprinting is heralded as a candidate technology that can be combined with cryptographic and zero-trust security measures to ensure data privacy, confidentiality, and integrity in wireless networks. Motivated by the relevance of this subject in the future communication networks, in this work, we present a comprehensive survey of RF fingerprinting approaches ranging from a traditional view to the most recent deep learning (DL)-based algorithms. Existing surveys have mostly focused on a constrained presentation of the wireless fingerprinting approaches, however, many aspects remain untold. In this work, however, we mitigate this by addressing every aspect - background on signal intelligence (SIGINT), applications, relevant DL algorithms, systematic literature review of RF fingerprinting techniques spanning the past two decades, discussion on datasets, and potential research avenues - necessary to elucidate this topic to the reader in an encyclopedic manner.

cs.LG↗

arXiv2022

Security and Privacy vulnerabilities of 5G/6G and WiFi 6: Survey and Research Directions from a Coexistence Perspective

Spectrum scarcity has been a major concern for achieving the desired quality of experience (QoE) in next-generation (5G/6G and beyond) networks supporting a massive volume of mobile and IoT devices with low-latency and seamless connectivity. Hence, spectrum sharing systems have been considered as a major enabler for next-generation wireless networks in meeting QoE demands. While most current coexistence solutions and standards focus on performance improvement and QoE optimization, the emerging security challenges of such network environments have been ignored in the literature. The security framework of standalone networks (either 5G or WiFi) assumes the ownership of entire network resources from spectrum to core functions. Hence, all accesses to the network shall be authenticated and authorized within the intra-network security system and is deemed illegal otherwise. However, coexistence network environments can lead to unprecedented security vulnerabilities and breaches as the standalone networks shall tolerate unknown and out-of-network accesses, specifically in the medium access. In this paper, for the first time in literature, we review some of the critical and emerging security vulnerabilities in the 5G/WiFi coexistence network environment which have not been observed previously in standalone networks. Specifically, independent medium access control (MAC) protocols and the resulting hidden node issues can result in exploitation such as service blocking, deployment of rogue base-stations, and eavesdropping attacks. We study potential vulnerabilities in the perspective of physical layer authentication, network access security, and cross-layer authentication mechanisms. This study opens a new direction of research in the analysis and design of a security framework that can address the unique challenges of coexistence networks.

cs.NI↗

arXiv2022

Multi-task Learning Approach for Modulation and Wireless Signal Classification for 5G and Beyond: Edge Deployment via Model Compression

Future communication networks must address the scarce spectrum to accommodate extensive growth of heterogeneous wireless devices. Wireless signal recognition is becoming increasingly more significant for spectrum monitoring, spectrum management, secure communications, among others. Consequently, comprehensive spectrum awareness on the edge has the potential to serve as a key enabler for the emerging beyond 5G networks. State-of-the-art studies in this domain have (i) only focused on a single task - modulation or signal (protocol) classification - which in many cases is insufficient information for a system to act on, (ii) consider either radar or communication waveforms (homogeneous waveform category), and (iii) does not address edge deployment during neural network design phase. In this work, for the first time in the wireless communication domain, we exploit the potential of deep neural networks based multi-task learning (MTL) framework to simultaneously learn modulation and signal classification tasks while considering heterogeneous wireless signals such as radar and communication waveforms in the electromagnetic spectrum. The proposed MTL architecture benefits from the mutual relation between the two tasks in improving the classification accuracy as well as the learning efficiency with a lightweight neural network model. We additionally include experimental evaluations of the model with over-the-air collected samples and demonstrate first-hand insight on model compression along with deep learning pipeline for deployment on resource-constrained edge devices. We demonstrate significant computational, memory, and accuracy improvement of the proposed model over two reference architectures. In addition to modeling a lightweight MTL model suitable for resource-constrained embedded radio platforms, we provide a comprehensive heterogeneous wireless signals dataset for public use.

eess.SP↗

arXiv2022

Distributed Transmission Control for Wireless Networks using Multi-Agent Reinforcement Learning

We examine the problem of transmission control, i.e., when to transmit, in distributed wireless communications networks through the lens of multi-agent reinforcement learning. Most other works using reinforcement learning to control or schedule transmissions use some centralized control mechanism, whereas our approach is fully distributed. Each transmitter node is an independent reinforcement learning agent and does not have direct knowledge of the actions taken by other agents. We consider the case where only a subset of agents can successfully transmit at a time, so each agent must learn to act cooperatively with other agents. An agent may decide to transmit a certain number of steps into the future, but this decision is not communicated to the other agents, so it the task of the individual agents to attempt to transmit at appropriate times. We achieve this collaborative behavior through studying the effects of different actions spaces. We are agnostic to the physical layer, which makes our approach applicable to many types of networks. We submit that approaches similar to ours may be useful in other domains that use multi-agent reinforcement learning with independent agents.

cs.LG↗

arXiv2022

Digital Twin Virtualization with Machine Learning for IoT and Beyond 5G Networks: Research Directions for Security and Optimal Control

Digital twin (DT) technologies have emerged as a solution for real-time data-driven modeling of cyber physical systems (CPS) using the vast amount of data available by Internet of Things (IoT) networks. In this position paper, we elucidate unique characteristics and capabilities of a DT framework that enables realization of such promises as online learning of a physical environment, real-time monitoring of assets, Monte Carlo heuristic search for predictive prevention, on-policy, and off-policy reinforcement learning in real-time. We establish a conceptual layered architecture for a DT framework with decentralized implementation on cloud computing and enabled by artificial intelligence (AI) services for modeling, event detection, and decision-making processes. The DT framework separates the control functions, deployed as a system of logically centralized process, from the physical devices under control, much like software-defined networking (SDN) in fifth generation (5G) wireless networks. We discuss the moment of the DT framework in facilitating implementation of network-based control processes and its implications for critical infrastructure. To clarify the significance of DT in lowering the risk of development and deployment of innovative technologies on existing system, we discuss the application of implementing zero trust architecture (ZTA) as a necessary security framework in future data-driven communication networks.

cs.NI↗

arXiv2022

Deep neural network goes lighter: A case study of deep compression techniques on automatic RF modulation recognition for Beyond 5G networks

Automatic RF modulation recognition is a primary signal intelligence (SIGINT) technique that serves as a physical layer authentication enabler and automated signal processing scheme for the beyond 5G and military networks. Most existing works rely on adopting deep neural network architectures to enable RF modulation recognition. The application of deep compression for the wireless domain, especially automatic RF modulation classification, is still in its infancy. Lightweight neural networks are key to sustain edge computation capability on resource-constrained platforms. In this letter, we provide an in-depth view of the state-of-the-art deep compression and acceleration techniques with an emphasis on edge deployment for beyond 5G networks. Finally, we present an extensive analysis of the representative acceleration approaches as a case study on automatic radar modulation classification and evaluate them in terms of the computational metrics.

cs.LG↗

arXiv2022

MR-iNet Gym: Framework for Edge Deployment of Deep Reinforcement Learning on Embedded Software Defined Radio

Dynamic resource allocation plays a critical role in the next generation of intelligent wireless communication systems. Machine learning has been leveraged as a powerful tool to make strides in this domain. In most cases, the progress has been limited to simulations due to the challenging nature of hardware deployment of these solutions. In this paper, for the first time, we design and deploy deep reinforcement learning (DRL)-based power control agents on the GPU embedded software defined radios (SDRs). To this end, we propose an end-to-end framework (MR-iNet Gym) where the simulation suite and the embedded SDR development work cohesively to overcome real-world implementation hurdles. To prove feasibility, we consider the problem of distributed power control for code-division multiple access (DS-CDMA)-based LPI/D transceivers. We first build a DS-CDMA ns3 module that interacts with the OpenAI Gym environment. Next, we train the power control DRL agents in this ns3-gym simulation environment in a scenario that replicates our hardware testbed. Next, for edge (embedded on-device) deployment, the trained models are optimized for real-time operation without loss of performance. Hardware-based evaluation verifies the efficiency of DRL agents over traditional distributed constrained power control (DCPC) algorithm. More significantly, as the primary goal, this is the first work that has established the feasibility of deploying DRL to provide optimized distributed resource allocation for next-generation of GPU-embedded radios.

cs.LG↗

arXiv2022

Design of Fieldable Cross-Layer Optimized Network using Embedded Software Defined Radios: Survey and Novel Architecture with Field Trials

The proliferation of wireless devices and their ever increasing influence on our day-to-day life is very evident and seems irreplaceable. This exponential growth in demand, both in terms of the number of devices and Quality of Service (QoS) had spawned the concept of cross-layer optimization several years ago. The primary goal of the cross-layer approach was to liberate the strict boundary between the layers of the traditional Open Systems Interconnection (OSI) protocol stack. The initial decade focused on establishing the theoretical feasibility of this revolutionary concept and gauging the effectiveness and limits of this idea. During the next phase, the advent of software defined radios (SDR) accelerated the growth of this domain due to its added flexibility. Yet, there has been a gaping abyss between solutions designed in theory and ones deployed in practice. To establish this, we first present an elaborate survey of the cross-layer protocol stack literature. Next, we briefly discuss how a commercial off-the-shelf (COTS), low SWaP (Size, Weight, and Power) embedded SDR (e-SDR) was transformed into a standalone, fieldable transceiver. Thereafter, we provide the software design ethos that focuses on efficiency and flexibility such that the optimization objectives and cross-layer interactions can be reconfigured rapidly. To demonstrate our claims, we provide results from extensive outdoor over-the-air experiments in various settings with up to 10-node network topologies. The results from the field trials demonstrate high reliability, throughput, and dynamic routing capability. To the best of our knowledge, this is the first time in literature, a COTS e-SDR has been leveraged to successfully design a cross-layer optimized transceiver that is capable of forming an ad hoc network that provides high throughput and high reliability in a ruggedized, weatherized, and fieldable form factor.

cs.NI↗

arXiv2021

Fieldable Cross-Layer Optimized Embedded Software Defined Radio is Finally Here!

The concept of cross-layer optimization has been around for several years now. The primary goal of the cross-layer approach was to liberate the strict boundary between the layers of the traditional OSI protocol stack. This is to enable information flow between layers which then can be leveraged to optimize the network's performance across the layers. This concept has been of keen interest for tactical application as there is an overwhelming requirement to operate in a challenging and dynamic environment. The advent of software defined radios (SDR) accelerated the growth of this domain due to the added flexibility provided by SDRs. Even with the immense interest and progress in this area of research, there has been a gaping abyss between solutions designed in theory and ones deployed in practice. To the best of our knowledge, this is the first time in literature, an embedded SDR has been leveraged to successfully design a cross-layer optimized transceiver that provides high throughput and high reliability in a ruggedized, weatherized, and fieldable form-factor. The design ethos focuses on efficiency and flexibility such that optimization objectives, cross-layer interactions can be reconfigured rapidly. To demonstrate our claims, we provide results from extensive outdoor over-the-air evaluation in various settings with up to 10-node network typologies. The results demonstrate high reliability, throughput, and dynamic routing capability achieving high technology readiness level (TRL) for tactical applications.

cs.NI↗

arXiv2021

Redefining Wireless Communication for 6G: Signal Processing Meets Deep Learning with Deep Unfolding

The year 2019 witnessed the rollout of the 5G standard, which promises to offer significant data rate improvement over 4G. While 5G is still in its infancy, there has been an increased shift in the research community for communication technologies beyond 5G. The recent emergence of machine learning approaches for enhancing wireless communications and empowering them with much-desired intelligence holds immense potential for redefining wireless communication for 6G. The evolving communication systems will be bottlenecked in terms of latency, throughput, and reliability by the underlying signal processing at the physical layer. In this position paper, we motivate the need to redesign iterative signal processing algorithms by leveraging deep unfolding techniques to fulfill the physical layer requirements for 6G networks. To this end, we begin by presenting the service requirements and the key challenges posed by the envisioned 6G communication architecture. We outline the deficiencies of the traditional algorithmic principles and data-hungry deep learning (DL) approaches in the context of 6G networks. Specifically, deep unfolded signal processing is presented by sketching the interplay between domain knowledge and DL. The deep unfolded approaches reviewed in this article are positioned explicitly in the context of the requirements imposed by the next generation of cellular networks. Finally, this article motivates open research challenges to truly realize hardware-efficient edge intelligence for future 6G networks.

cs.NI↗

arXiv2021

Multi-task Learning Approach for Automatic Modulation and Wireless Signal Classification

Wireless signal recognition is becoming increasingly more significant for spectrum monitoring, spectrum management, and secure communications. Consequently, it will become a key enabler with the emerging fifth-generation (5G) and beyond 5G communications, Internet of Things networks, among others. State-of-the-art studies in wireless signal recognition have only focused on a single task which in many cases is insufficient information for a system to act on. In this work, for the first time in the wireless communication domain, we exploit the potential of deep neural networks in conjunction with multi-task learning (MTL) framework to simultaneously learn modulation and signal classification tasks. The proposed MTL architecture benefits from the mutual relation between the two tasks in improving the classification accuracy as well as the learning efficiency with a lightweight neural network model. Additionally, we consider the problem of heterogeneous wireless signals such as radar and communication signals in the electromagnetic spectrum. Accordingly, we have shown how the proposed MTL model outperforms several state-of-the-art single-task learning classifiers while maintaining a lighter architecture and performing two signal characterization tasks simultaneously. Finally, we also release the only known open heterogeneous wireless signals dataset that comprises of radar and communication signals with multiple labels.

cs.LG↗

arXiv2020

Jam-Guard: Low-Cost, Hand-held Device for First Responders to Detect and Localize Jammers

Intentional and unintentional interferences collectively referred to as Radio Frequency Interference (RFI) result in severe security threat to the public safety, first responder emergency rescue and military missions. Such RFI if not detected and localized can disrupt the wireless communication which forms the backbone of first responder and military operations. The prime objective of this work was to design and prototype a RFI detection and localization device, Jam-Guard that significantly outperforms traditional approaches in real-life deployment yet be computationally feasible to be developed as a low SWaC (size, weight, and cost) device. The proposed device employs a unique combination of robust parallel detection algorithms based on Kurtosis and FRactional Fourier Transform (FRFT) with Golden Section Search algorithm to rapidly detect RFI that affects critical communication signals. The localization scheme is designed to leverage the FRFT output from the detection phase to ease the computational load. We give a detailed account of the device prototyping and evaluation. To demonstrate the efficacy of the proposed detection approach as opposed to conventional energy detection (employed in several commercial interference detectors), we compare the two schemes on test and target platforms. The proposed scheme depicted significant improvement (~40 dB) in detection probability both in preliminary implementation and target prototype experiments.

eess.SP↗

arXiv2020

Deep Learning and Reinforcement Learning for Autonomous Unmanned Aerial Systems: Roadmap for Theory to Deployment

Unmanned Aerial Systems (UAS) are being increasingly deployed for commercial, civilian, and military applications. The current UAS state-of-the-art still depends on a remote human controller with robust wireless links to perform several of these applications. The lack of autonomy restricts the domains of application and tasks for which a UAS can be deployed. Enabling autonomy and intelligence to the UAS will help overcome this hurdle and expand its use improving safety and efficiency. The exponential increase in computing resources and the availability of large amount of data in this digital era has led to the resurgence of machine learning from its last winter. Therefore, in this chapter, we discuss how some of the advances in machine learning, specifically deep learning and reinforcement learning can be leveraged to develop next-generation autonomous UAS. We first begin motivating this chapter by discussing the application, challenges, and opportunities of the current UAS in the introductory section. We then provide an overview of some of the key deep learning and reinforcement learning techniques discussed throughout this chapter. A key area of focus that will be essential to enable autonomy to UAS is computer vision. Accordingly, we discuss how deep learning approaches have been used to accomplish some of the basic tasks that contribute to providing UAS autonomy. Then we discuss how reinforcement learning is explored for using this information to provide autonomous control and navigation for UAS. Next, we provide the reader with directions to choose appropriate simulation suites and hardware platforms that will help to rapidly prototype novel machine learning based solutions for UAS. We additionally discuss the open problems and challenges pertaining to each aspect of developing autonomous UAS solutions to shine light on potential research areas.

cs.LG↗

arXiv2020

Breaking the Bound: Rate-2, Full Diversity, Orthogonal MIMO-STBC Transceiver Design

Space Time Block Codes (STBCs) from orthogonal designs have attracted significant interest in recent years. However, with the growing demand for higher capacity schemes, the multiantenna transmission techniques must support and achieve higher symbol transmission rates. In this article, we focus on three and four transmit antenna schemes. For over two decades, STBC schemes for three and four transmit antennas that achieve a very high symbol transmission rate while being orthogonal, fully diverse, delay-efficient, and with very low decoding complexity have not been achieved. The schemes proposed so far trades off orthogonality, delay, diversity, or decoding complexity while achieving rate or vice-versa. This work is first of its kind to solve this problem while fulfilling all the desired properties. In this work, we carefully study the various aspects that must be considered in designing higher symbol transmission rate STBCs. The proposed designs, hereby referred to as, Jagannath schemes - for 4 x 3 and 4 x 4 configurations are orthogonal, achieve full diversity, and support a symbol transmission rate of 2 symbols/s/Hz. The design methodology follows a coding gain maximization approach. The low decoding complexity procedure to decode the proposed transmission schemes are proposed as well as extensively evaluated in simulations under diverse settings. The performance of proposed schemes are empirically compared to two state-of-the-art schemes; ACIOD and Jafarkhani. Jagannath 4 x 3 was shown to outperform ACIOD by ~12 dB while Jagannath 4 x 4 exhibited a ~7 dB superior performance in contrast to Jafarkhani at 4 bpcu. This motivates the adoption of Jagannath schemes in tactical and commercial communication systems to effectively double the throughput or to extend the

cs.NI↗