arXiv subjects

Anuj Pasricha

Publications and source records attributed to Anuj Pasricha.

8 recordsLinked to original sources

arXiv2026

Moving On, Even When You're Broken: Fail-Active Trajectory Generation via Diffusion Policies Conditioned on Embodiment and Task

Robot failure is detrimental and disruptive, often requiring human intervention to recover. Our vision is 'fail-active' operation, allowing robots to safely complete their tasks even when damaged. Focusing on 'actuation failures', we introduce DEFT, a diffusion-based trajectory generator conditioned on the robot's current embodiment and task constraints. DEFT generalizes across failure types, supports constrained and unconstrained motions, and enables task completion under arbitrary failure. We evaluate DEFT in both simulation and real-world scenarios using a 7-DoF robotic arm. DEFT outperforms its baselines over thousands of failure conditions, achieving a 99.5% success rate for unconstrained motions versus RRT's 42.4%, and 46.4% for constrained motions versus differential IK's 30.9%. Furthermore, DEFT demonstrates robust zero-shot generalization by maintaining performance on failure conditions unseen during training. Finally, we perform real-world evaluations on two multi-step tasks, drawer manipulation and whiteboard erasing. These experiments demonstrate DEFT succeeding on tasks where classical methods fail. Our results show that DEFT achieves fail-active manipulation across arbitrary failure configurations and real-world deployments.

cs.RO↗

arXiv2025

Dynamics-Compliant Trajectory Diffusion for Super-Nominal Payload Manipulation

Nominal payload ratings for articulated robots are typically derived from worst-case configurations, resulting in uniform payload constraints across the entire workspace. This conservative approach severely underutilizes the robot's inherent capabilities -- our analysis demonstrates that manipulators can safely handle payloads well above nominal capacity across broad regions of their workspace while staying within joint angle, velocity, acceleration, and torque limits. To address this gap between assumed and actual capability, we propose a novel trajectory generation approach using denoising diffusion models that explicitly incorporates payload constraints into the planning process. Unlike traditional sampling-based methods that rely on inefficient trial-and-error, optimization-based methods that are prohibitively slow, or kinodynamic planners that struggle with problem dimensionality, our approach generates dynamically feasible joint-space trajectories in constant time that can be directly executed on physical hardware without post-processing. Experimental validation on a 7 DoF Franka Emika Panda robot demonstrates that up to 67.6% of the workspace remains accessible even with payloads exceeding 3 times the nominal capacity. This expanded operational envelope highlights the importance of a more nuanced consideration of payload dynamics in motion planning algorithms.

cs.RO↗

arXiv2024

Exploring How Non-Prehensile Manipulation Expands Capability in Robots Experiencing Multi-Joint Failure

This work explores non-prehensile manipulation (NPM) and whole-body interaction as strategies for enabling robotic manipulators to conduct manipulation tasks despite experiencing locked multi-joint (LMJ) failures. LMJs are critical system faults where two or more joints become inoperable; they impose constraints on the robot's configuration and control spaces, consequently limiting the capability and reach of a prehensile-only approach. This approach involves three components: i) modeling the failure-constrained workspace of the robot, ii) generating a kinodynamic map of NPM actions within this workspace, and iii) a manipulation action planner that uses a sim-in-the-loop approach to select the best actions to take from the kinodynamic map. The experimental evaluation shows that our approach can increase the failure-constrained reachable area in LMJ cases by 79%. Further, it demonstrates the ability to complete real-world manipulation with up to 88.9% success when the end-effector is unusable and up to 100% success when it is usable.

cs.RO↗

arXiv2024

Towards Super-Nominal Payload Handling: Inverse Dynamics Analysis for Multi-Skill Robotic Manipulation

Motion planning for articulated robots has traditionally been governed by algorithms that operate within manufacturer-defined payload limits. Our empirical analysis of the Franka Emika Panda robot demonstrates that this approach unnecessarily restricts the robot's dynamically-reachable task space. These results establish an expanded operational envelope for such robots, showing that they can handle payloads of more than twice their rated capacity. Additionally, our preliminary findings indicate that integrating non-prehensile motion primitives with grasping-based manipulation has the potential to further increase the success rates of manipulation tasks involving payloads exceeding nominal limits.

cs.RO↗

arXiv2024

Clutter-Aware Spill-Free Liquid Transport via Learned Dynamics

In this work, we present a novel algorithm to perform spill-free handling of open-top liquid-filled containers that operates in cluttered environments. By allowing liquid-filled containers to be tilted at higher angles and enabling motion along all axes of end-effector orientation, our work extends the reachable space and enhances maneuverability around obstacles, broadening the range of feasible scenarios. Our key contributions include: i) generating spill-free paths through the use of RRT* with an informed sampler that leverages container properties to avoid spill-inducing states (such as an upside-down container), ii) parameterizing the resulting path to generate spill-free trajectories through the implementation of a time parameterization algorithm, coupled with a transformer-based machine-learning model capable of classifying trajectories as spill-free or not. We validate our approach in real-world, obstacle-rich task settings using containers of various shapes and fill levels and demonstrate an extended solution space that is at least 3x larger than an existing approach.

cs.RO↗

arXiv2024

The Virtues of Laziness: Multi-Query Kinodynamic Motion Planning with Lazy Methods

In this work, we introduce LazyBoE, a multi-query method for kinodynamic motion planning with forward propagation. This algorithm allows for the simultaneous exploration of a robot's state and control spaces, thereby enabling a wider suite of dynamic tasks in real-world applications. Our contributions are three-fold: i) a method for discretizing the state and control spaces to amortize planning times across multiple queries; ii) lazy approaches to collision checking and propagation of control sequences that decrease the cost of physics-based simulation; and iii) LazyBoE, a robust kinodynamic planner that leverages these two contributions to produce dynamically-feasible trajectories. The proposed framework not only reduces planning time but also increases success rate in comparison to previous approaches.

cs.RO↗

arXiv2022

PokeRRT: A Kinodynamic Planning Approach for Poking Manipulation

This work introduces PokeRRT, a novel motion planning algorithm that demonstrates poking as an effective non-prehensile manipulation skill to enable fast manipulation of objects and increase the size of a robot's reachable workspace. Our qualitative and quantitative results demonstrate the advantages of poking over pushing and grasping in planning object trajectories through uncluttered and cluttered environments.

cs.RO↗

arXiv2022

PokeRRT: Poking as a Skill and Failure Recovery Tactic for Planar Non-Prehensile Manipulation

In this work, we introduce PokeRRT, a novel motion planning algorithm that demonstrates poking as an effective non-prehensile manipulation skill to enable fast manipulation of objects and increase the size of a robot's reachable workspace. We showcase poking as a failure recovery tactic used synergistically with pick-and-place for resiliency in cases where pick-and-place initially fails or is unachievable. Our experiments demonstrate the efficiency of the proposed framework in planning object trajectories using poking manipulation in uncluttered and cluttered environments. In addition to quantitatively and qualitatively demonstrating the adaptability of PokeRRT to different scenarios in both simulation and real-world settings, our results show the advantages of poking over pushing and grasping in terms of success rate and task time.

cs.RO↗