arXiv subjects

Anum Ali

Publications and source records attributed to Anum Ali.

17 recordsLinked to original sources

arXiv2024

Near or far: On determining the appropriate channel estimation strategy in cross-field communication

The use of ultra-massive multiple-input multiple-output and high-frequency large bandwidth systems is likely in the next-generation wireless communication systems. In such systems, the user moves between near- and far-field regions, and consequently, the channel estimation will need to be carried out in the cross-field scenario. Channel estimation strategies have been proposed for both near- and far-fields, but in the cross-field problem, the first step is to determine whether the near- or far-field is applicable so that an appropriate channel estimation strategy can be employed. In this work, we propose using a hidden Markov model over an ensemble of region estimates to enhance the accuracy of selecting the actual region. The region indicators are calculated using the pair-wise power differences between received signals across the subarrays within an array-of-subarrays architecture. Numerical results show that the proposed method achieves a high success rate in determining the appropriate channel estimation strategy.

eess.SP↗

arXiv2023

Cross-Field Channel Estimation for Ultra Massive-MIMO THz Systems

The large bandwidth combined with ultra-massive multiple-input multiple-output (UM-MIMO) arrays enables terahertz (THz) systems to achieve terabits-per-second throughput. The THz systems are expected to operate in the near, intermediate, as well as the far-field. As such, channel estimation strategies suitable for the near, intermediate, or far-field have been introduced in the literature. In this work, we propose a cross-field, i.e., able to operate in near, intermediate, and far-field, compressive channel estimation strategy. For an array-of-subarrays (AoSA) architecture, the proposed method compares the received signals across the arrays to determine whether a near, intermediate, or far-field channel estimation approach will be appropriate. Subsequently, compressed estimation is performed in which the proximity of multiple subarrays (SAs) at the transmitter and receiver is exploited to reduce computational complexity and increase estimation accuracy. Numerical results show that the proposed method can enhance channel estimation accuracy and complexity at all distances of interest.

cs.IT↗

arXiv2022

Beam Management with Orientation and RSRP using Deep Learning for Beyond 5G Systems

Beam management (BM), i.e., the process of finding and maintaining a suitable transmit and receive beam pair, can be challenging, particularly in highly dynamic scenarios. Side-information, e.g., orientation, from on-board sensors can assist the user equipment (UE) BM. In this work, we use the orientation information coming from the inertial measurement unit (IMU) for effective BM. We use a data-driven strategy that fuses the reference signal received power (RSRP) with orientation information using a recurrent neural network (RNN). Simulation results show that the proposed strategy performs much better than the conventional BM and an orientation-assisted BM strategy that utilizes particle filter in another study. Specifically, the proposed data-driven strategy improves the beam-prediction accuracy up to 34% and increases mean RSRP by up to 4.2 dB when the UE orientation changes quickly.

eess.SP↗

arXiv2021

Sub-Chain Beam for mmWave Devices: A Trade-off between Power Saving and Beam Correspondence

Beam correspondence, or downlink-uplink (DL-UL) beam reciprocity, refers to the assumption that the best beams in the DL are also the best beams in the UL. This is an important assumption that allows the existing beam management framework in 5G to rely heavily on DL beam sweeping and avoid UL beam sweeping: UL beams are inferred from the measurements of the DL reference signals. Beam correspondence holds when the radio configurations are symmetric in the DL and UL. However, as mmWave technology matures, the DL and the UL face different constraints often breaking the beam correspondence. For example, power constraints may require a UE to activate only a portion of its antenna array for UL transmission, while still activating the full array for DL reception. Meanwhile, if the UL beam with sub-array, named as sub-chain beam in this paper, has a similar radiation pattern as the DL beam, the beam correspondence can still hold. This paper proposes methods for sub-chain beam codebook design to achieve a trade-off between the power saving and beam correspondence.

cs.IT↗

arXiv2021

Mean-square Analysis of the NLMS Algorithm

This work presents a novel approach to the mean-square analysis of the normalized least mean squares (NLMS) algorithm for circular complex colored Gaussian inputs. The analysis is based on the derivation of a closed-form expression for the Cumulative Distribution Function (CDF) of random variables of the form $(||{\bf u}||_{{\bf D}_1}^2)(||{\bf u}||_{{\bf D}_2}^2)^{-1}$ where ${\bf u}$ is an isotropic vector and ${\bf D}_1$ and ${\bf D}_2$ are diagonal matrices and using that to derive some moments of these variables. These moments in turn completely characterize the mean-square behavior of the NLMS algorithm in explicit closed-form expressions. Specifically, the transient, steady-state, and tracking mean-square behavior of the NLMS algorithm is studied.

eess.SP↗

arXiv2019

Leveraging Sensing at the Infrastructure for mmWave Communication

Vehicle-to-everything (V2X) communication in the mmWave band is one way to achieve high data-rates for applications like infotainment, cooperative perception, and augmented reality assisted driving etc. MmWave communication relies on large antennas arrays, and configuring these arrays poses high training overhead. In this article, we motivate the use of infrastructure mounted sensors (which will be part of future smart cities) for mmWave communication. We provide numerical and measurement results to demonstrate that information from these infrastructure sensors reduces the mmWave array configuration overhead. Finally, we outline future research directions to help materialize the use of infrastructure sensors for mmWave communication.

cs.IT↗

arXiv2019

Passive Radar at the Roadside Unit to Configure Millimeter Wave Vehicle-to-Infrastructure Links

Millimeter wave (mmWave) vehicular channels are highly dynamic, and the communication link needs to be reconfigured frequently. In this work, we propose to use a passive radar receiver at the roadside unit to reduce the training overhead of establishing an mmWave communication link. Specifically, the passive radar will tap the transmissions from the automotive radars of the vehicles on the road. The spatial covariance of the received radar signals will be estimated and used to establish the communication link. We propose a simplified radar receiver that does not require the transmitted waveform as a reference. To leverage the radar information for beamforming, the radar azimuth power spectrum (APS) and the communication APS should be similar. We outline a radar covariance correction strategy to increase the similarity between the radar and communication APS. We also propose a metric to compare the similarity of the radar and communication APS that has a connection with the achievable rate. We present simulation results based on ray-tracing data. The results show that: (i) covariance correction improves the similarity of radar and communication APS, and (ii) the radar-assisted strategy significantly reduces the training overhead, being particularly useful in non-line-of-sight scenarios.

cs.IT↗

arXiv2019

Non-Stationarities in Extra-Large Scale Massive MIMO

Massive MIMO, a key technology for increasing area spectral efficiency in cellular systems, was developed assuming moderately sized apertures. In this paper, we argue that massive MIMO systems behave differently in large-scale regimes due to spatial non-stationarity. In the large-scale regime, with arrays of around fifty wavelengths, the terminals see the whole array but non-stationarities occur because different regions of the array see different propagation paths. At even larger dimensions, which we call the extra-large scale regime, terminals see a portion of the array and inside the first type of non-stationarities might occur. We show that the non-stationarity properties of the massive MIMO channel changes several important MIMO design aspects. In simulations, we demonstrate how non-stationarity is a curse when neglected but a blessing when embraced in terms of computational load and multi-user transceiver design.

cs.IT↗

arXiv2019

Spatial Channel Covariance Estimation for Hybrid Architectures Based on Tensor Decompositions

Spatial channel covariance information can replace full instantaneous channel state information for the analog precoder design in hybrid analog/digital architectures. Obtaining spatial channel covariance estimation, however, is challenging in the hybrid structure due to the use of fewer radio frequency (RF) chains than the number of antennas. In this paper, we propose a spatial channel covariance estimation method based on higher-order tensor decomposition for spatially sparse time-varying frequency-selective channels. The proposed method leverages the fact that the channel can be represented as a low-rank higher-order tensor. We also derive the Cramér-Rao lower bound on the estimation accuracy of the proposed method. Numerical results and theoretical analysis show that the proposed tensor-based approach achieves higher estimation accuracy in comparison with prior compressive-sensing-based approaches or conventional angle-of-arrival estimation approaches. Simulation results reveal that the proposed approach becomes more beneficial at low signal-to-noise (SNR) region.

eess.SP↗

arXiv2018

Linear Receivers in Non-stationary Massive MIMO Channels with Visibility Regions

In a massive MIMO system with large arrays, the channel becomes spatially non-stationary. We study the impact of spatial non-stationarity characterized by visibility regions (VRs) where the channel energy is significant on a portion of the array. Relying on a channel model based on VRs, we provide expressions of the signal-to-interference-plus-noise ratio (SINR) of conjugate beamforming (CB) and zero-forcing (ZF) precoders. We also provide an approximate deterministic equivalent of the SINR of ZF precoders. We identify favorable and unfavorable multi-user configurations of the VRs and compare the performance of both stationary and non-stationary channels through analysis and numerical simulations.

eess.SP↗

arXiv2018

Spatial Covariance Estimation for Millimeter Wave Hybrid Systems using Out-of-Band Information

In high mobility applications of millimeter wave (mmWave) communications, e.g., vehicle-to-everything communication and next-generation cellular communication, frequent link configuration can be a source of significant overhead. We use the sub-6 GHz channel covariance as an out-of-band side information for mmWave link configuration. Assuming: (i) a fully digital architecture at sub-6 GHz; and (ii) a hybrid analog-digital architecture at mmWave, we propose an out-of-band covariance translation approach and an out-of-band aided compressed covariance estimation approach. For covariance translation, we estimate the parameters of sub-6 GHz covariance and use them in theoretical expressions of covariance matrices to predict the mmWave covariance. For out-of-band aided covariance estimation, we use weighted sparse signal recovery to incorporate out-of-band information in compressed covariance estimation. The out-of-band covariance translation eliminates the in-band training completely, whereas out-of-band aided covariance estimation relies on in-band as well as out-of-band training. We also analyze the loss in the signal-to-noise ratio due to an imperfect estimate of the covariance. The simulation results show that the proposed covariance estimation strategies can reduce the training overhead compared to the in-band only covariance estimation.

cs.IT↗

arXiv2017

Millimeter Wave communication with out-of-band information

Configuring the antenna arrays is the main source of overhead in millimeter wave (mmWave) communication systems. In high mobility scenarios, the problem is exacerbated, as achieving the highest rates requires frequent link reconfiguration. One solution is to exploit spatial congruence between signals at different frequency bands and extract mmWave channel parameters from side information obtained in another band. In this paper we propose the concept of out-of-band information aided mmWave communication. We analyze different strategies to leverage information derived from sensors or from other communication systems operating at sub-6 GHz bands to help configure the mmWave communication link. The overhead reductions that can be obtained when exploiting out-of-band information are characterized in a preliminary study. Finally, the challenges associated with using out-of-band signals as a source of side information at mmWave are analyzed in detail.

cs.IT↗

arXiv2017

Millimeter Wave Beam-Selection Using Out-of-Band Spatial Information

Millimeter wave (mmWave) communication is one feasible solution for high data-rate applications like vehicular-to-everything communication and next generation cellular communication. Configuring mmWave links, which can be done through channel estimation or beam-selection, however, is a source of significant overhead. In this paper, we propose to use spatial information extracted at sub-6 GHz to help establish the mmWave link. First, we review the prior work on frequency dependent channel behavior and outline a simulation strategy to generate multi-band frequency dependent channels. Second, assuming: (i) narrowband channels and a fully digital architecture at sub-6 GHz; and (ii) wideband frequency selective channels, OFDM signaling, and an analog architecture at mmWave, we outline strategies to incorporate sub-6 GHz spatial information in mmWave compressed beam selection. We formulate compressed beam-selection as a weighted sparse signal recovery problem, and obtain the weighting information from sub-6 GHz channels. In addition, we outline a structured precoder/combiner design to tailor the training to out-of-band information. We also extend the proposed out-of-band aided compressed beam-selection approach to leverage information from all active OFDM subcarriers. The simulation results for achievable rate show that out-of-band aided beam-selection can reduce the training overhead of in-band only beam-selection by 4x.

cs.IT↗

arXiv2015

Distributed Channel Estimation and Pilot Contamination Analysis for Massive MIMO-OFDM Systems

Massive MIMO communication systems, by virtue of utilizing very large number of antennas, have a potential to yield higher spectral and energy efficiency in comparison with the conventional MIMO systems. In this paper, we consider uplink channel estimation in massive MIMO-OFDM systems with frequency selective channels. With increased number of antennas, the channel estimation problem becomes very challenging as exceptionally large number of channel parameters have to be estimated. We propose an efficient distributed linear minimum mean square error (LMMSE) algorithm that can achieve near optimal channel estimates at very low complexity by exploiting the strong spatial correlations and symmetry of large antenna array elements. The proposed method involves solving a (fixed) reduced dimensional LMMSE problem at each antenna followed by a repetitive sharing of information through collaboration among neighboring antenna elements. To further enhance the channel estimates and/or reduce the number of reserved pilot tones, we propose a data-aided estimation technique that relies on finding a set of most reliable data carriers. We also analyse the effect of pilot contamination on the mean square error (MSE) performance of different channel estimation techniques. Unlike the conventional approaches, we use stochastic geometry to obtain analytical expression for interference variance (or power) across OFDM frequency tones and use it to derive the MSE expressions for different algorithms under both noise and pilot contaminated regimes. Simulation results validate our analysis and the near optimal MSE performance of proposed estimation algorithms.

cs.IT↗

arXiv2015

Nonlinear Distortion Reduction in OFDM from Reliable Perturbations in Data Carriers

A novel method for correcting the effect of nonlinear distortion in orthogonal frequency division multiplexing signals is proposed. The method depends on adaptively selecting the distortion over a subset of the data carriers, and then using tools from compressed sensing and sparse Bayesian recovery to estimate the distortion over the other carriers. Central to this method is the fact that carriers (or tones) are decoded with different levels of confidence, depending on a coupled function of the magnitude and phase of the distortion over each carrier, in addition to the respective channel strength. Moreover, as no pilots are required by this method, a significant improvement in terms of achievable rate can be achieved relative to previous work.

cs.IT↗

arXiv2014

Receiver-based Recovery of Clipped OFDM Signals for PAPR Reduction: A Bayesian Approach

Clipping is one of the simplest peak-to-average power ratio (PAPR) reduction schemes for orthogonal frequency division multiplexing (OFDM). Deliberately clipping the transmission signal degrades system performance, and clipping mitigation is required at the receiver for information restoration. In this work, we acknowledge the sparse nature of the clipping signal and propose a low-complexity Bayesian clipping estimation scheme. The proposed scheme utilizes a priori information about the sparsity rate and noise variance for enhanced recovery. At the same time, the proposed scheme is robust against inaccurate estimates of the clipping signal statistics. The undistorted phase property of the clipped signal, as well as the clipping likelihood, is utilized for enhanced reconstruction. Further, motivated by the nature of modern OFDM-based communication systems, we extend our clipping reconstruction approach to multiple antenna receivers, and multi-user OFDM. We also address the problem of channel estimation from pilots contaminated by the clipping distortion. Numerical findings are presented, that depict favourable results for the proposed scheme compared to the established sparse reconstruction schemes.

stat.AP↗

arXiv2014

Narrowband Interference Mitigation in SC-FDMA Using Bayesian Sparse Recovery

This paper presents a novel narrowband interference (NBI) mitigation scheme for SC-FDMA systems. The proposed NBI cancellation scheme exploits the frequency domain sparsity of the unknown signal and adopts a low complexity Bayesian sparse recovery procedure. At the transmitter, a few randomly chosen sub-carriers are kept data free to sense the NBI signal at the receiver. Further, it is noted that in practice, the sparsity of the NBI signal is destroyed by a grid mismatch between NBI sources and the system under consideration. Towards this end, first an accurate grid mismatch model is presented that is capable of assuming independent offsets for multiple NBI sources. Secondly, prior to NBI reconstruction, the sparsity of the unknown signal is restored by employing a sparsifying transform. To improve the spectral efficiency of the proposed scheme, a data-aided NBI recovery procedure is outlined that relies on adaptively selecting a subset of data carriers and uses them as additional measurements to enhance the NBI estimation. Finally, the proposed scheme is extended to single-input multi-output systems by performing a collaborative NBI support search over all antennas. Numerical results are presented that depict the suitability of the proposed scheme for NBI mitigation.

cs.IT↗