SearcharxivSearch

arXiv subjects

Apoorv Jindal

Publications and source records attributed to Apoorv Jindal.

5 recordsLinked to original sources

Beta Tantalum Transmon Qubits with Quality Factors Approaching 10 Million

Tantalum-based transmon qubits are a promising platform for building large-scale quantum processors. So far, these qubits have been made from tantalum films grown exclusively in the alpha phase ({\alpha}-Ta). The beta phase of tantalum (\{beta}-Ta) readily nucleates at room temperature, making it attractive for scalable qubit fabrication. However, \{beta}-Ta is widely believed to be detrimental to qubit performance because it has a lower superconducting critical temperature than {\alpha}-Ta. We challenge this prevailing belief by fabricating low-loss transmon qubits from \{beta}-Ta films on sapphire. Across 11 qubits, the mean time-averaged quality factor is (5.6 +/- 2.3) x 10^6, with the best qubit recording a time-averaged quality factor of (10.1 +/- 1.3) x 10^6. Resonator studies demonstrate that the dominant microwave loss channel is surface two-level systems, with the surface loss contribution for \{beta}-Ta being about twice that of {\alpha}-Ta. \{beta}-Ta films exhibit significant kinetic inductance, consistent with an estimated magnetic penetration depth of (1.78 +/- 0.02) {\mu}m. This work establishes \{beta}-Ta on sapphire as a material platform for realizing low-loss transmon qubits and other superconducting devices such as compact resonators, kinetic inductance detectors, and quasiparticle traps.

quant-ph

Quantifying surface losses in superconducting aluminum microwave resonators

The recent realization of millisecond-scale coherence with tantalum-on-silicon transmon qubits showed that depositing the Al/AlOx/Al Josephson junction in a high purity, ultrahigh vacuum environment was critical for achieving lifetime-limited coherence, motivating careful examination of the aluminum surface two-level system (TLS) bath. Here, we measure the microwave absorption arising from surface TLSs in superconducting aluminum resonators, following methodology developed for tantalum resonators. We vary film and surface properties and correlate microwave measurements with materials characterization. We find that the lifetimes of superconducting aluminum resonators are primarily limited by surface losses associated with TLSs in the 2.7 nm-thick native AlOx. Treatment with 49% HF removes surface AlOx completely; however, rapid oxide regrowth limits improvements in surface loss and long term device stability. Using these measurements we estimate that TLSs in aluminum interfaces contribute around 27% of the relaxation rate of state-of-the-art tantalum-on-silicon qubits that incorporate aluminum-based Josephson junctions.

quant-ph

2D transmons with lifetimes and coherence times exceeding 1 millisecond

Materials improvements are a powerful approach to reducing loss and decoherence in superconducting qubits because such improvements can be readily translated to large scale processors. Recent work improved transmon coherence by utilizing tantalum (Ta) as a base layer and sapphire as a substrate. The losses in these devices are dominated by two-level systems (TLSs) with comparable contributions from both the surface and bulk dielectrics, indicating that both must be tackled to achieve major improvements in the state of the art. Here we show that replacing the substrate with high-resistivity silicon (Si) dramatically decreases the bulk substrate loss, enabling 2D transmons with time-averaged quality factors (Q) exceeding 1.5 x 10^7, reaching a maximum Q of 2.5 x 10^7, corresponding to a lifetime (T_1) of up to 1.68 ms. This low loss allows us to observe decoherence effects related to the Josephson junction, and we use improved, low-contamination junction deposition to achieve Hahn echo coherence times (T_2E) exceeding T_1. We achieve these material improvements without any modifications to the qubit architecture, allowing us to readily incorporate standard quantum control gates. We demonstrate single qubit gates with 99.994% fidelity. The Ta-on-Si platform comprises a simple material stack that can potentially be fabricated at wafer scale, and therefore can be readily translated to large-scale quantum processors.

quant-ph

Two-Fold Anisotropic Superconductivity in Bilayer T$_d$-MoTe$_2$

Noncentrosymmetric 2D superconductors with large spin-orbit coupling offer an opportunity to explore superconducting behaviors far beyond the Pauli limit. One such superconductor, few-layer T$_d$-MoTe$_2$, has large upper critical fields that can exceed the Pauli limit by up to 600%. However, the mechanisms governing this enhancement are still under debate, with theory pointing towards either spin-orbit parity coupling or tilted Ising spin-orbit coupling. Moreover, ferroelectricity concomitant with superconductivity has been recently observed in the bilayer, where strong changes to superconductivity can be observed throughout the ferroelectric transition pathway. Here, we report the superconducting behavior of bilayer T$_d$-MoTe$ _2$ under an in-plane magnetic field, while systematically varying magnetic field angle and out-of-plane electric field strength. We find that superconductivity in bilayer MoTe$_2$ exhibits a two-fold symmetry with an upper critical field maxima occurring along the b-axis and minima along the a-axis. The two-fold rotational symmetry remains robust throughout the entire superconducting region and ferroelectric hysteresis loop. Our experimental observations of the spin-orbit coupling strength (up to 16.4 meV) agree with the spin texture and spin splitting from first-principles calculations, indicating that tilted Ising spin-orbit coupling is the dominant underlying mechanism.

cond-mat.supr-con

Coupled Ferroelectricity and Superconductivity in Bilayer $T_d$-MoTe$_2$

Achieving electrostatic control of quantum phases is at the frontier of condensed matter research. Recent investigations have revealed superconductivity tunable by electrostatic doping in twisted graphene heterostructures and in two-dimensional (2D) semimetals such as WTe$_2$. Some of these systems have a polar crystal structure that gives rise to ferroelectricity, in which the interlayer polarization exhibits bistability driven by external electric fields. Here we show that bilayer $T_d$-MoTe$_2$ simultaneously exhibits ferroelectric switching and superconductivity. Remarkably, a field-driven, first-order superconductor-to-normal transition is observed at its ferroelectric transition. Bilayer $T_d$-MoTe$_2$ also has a maximum in its superconducting transition temperature ($T_\textrm{c}$) as a function of carrier density and temperature, allowing independent control of the superconducting state as a function of both doping and polarization. We find that the maximum $T_\textrm{c}$ is concomitant with compensated electron and hole carrier densities and vanishes when one of the Fermi pockets disappears with doping. We argue that this unusual polarization-sensitive 2D superconductor is driven by an interband pairing interaction associated with nearly nested electron and hole Fermi pockets.

cond-mat.supr-con